標準號 |
中文名稱 |
英文名稱 |
| ISO 7270-1987 |
橡膠.聚合物(單聚合物和摻和物)的識別.熱解氣相色譜法 |
Rubber; Identification of polymers (single polymers and blends); Pyrolytic gas chromatographic method |
| ISO 7271-1982 |
鋁和鋁合金.箔材和薄帶材尺寸公差 |
Aluminium and aluminium alloys; Foil and thin strip; Dimensional tolerances |
| ISO 7273-1981 |
鍛鋁和鋁合金.擠壓圓型材.形狀和尺寸公差 |
Wrought aluminium and aluminium alloys; Extruded round bars; Tolerances on shape and dimensions |
| ISO 7274-1981 |
鍛鋁和鋁合金.冷拔圓棒材.形狀和尺寸公差(直徑的負公差) |
Wrought aluminium and aluminium alloys - Drawn round bars - Tolerances on shape and dimensions (All minus tolerances on diameter) |
| ISO 7275-1985 |
文獻工作.連續期刊的書目情報介紹 |
Documentation; Presentation of title information of series |
| ISO 7278-1-1987 |
液態烴.動態測量.容積式流量計試驗系統.第1部分:一般原理 |
Liquid hydrocarbons; Dynamic measurement; Proving systems for volumetric meters; Part 1 : General principles |
| ISO 7278-1-1987 |
液態烴.動態測量.容積式流量計試驗系統.第1部分:一般原理 |
Liquid hydrocarbons; Dynamic measurement; Proving systems for volumetric meters; Part 1 : General principles |
| ISO 7278-2-1988 |
液態烴.動態測量.容量計用驗證系統.第2部分:管式校準儀 |
Liquid hydrocarbons; dynamic measurement; proving systems for volumetric meters; part 2: pipe provers |
| ISO 7278-3-1998 |
液態烴.動態測量.容積式流量計試驗系統.第3部分:脈沖內插技術 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 3: Pulse interpolation techniques |
| ISO 7278-4-1999 |
液態烴.動態測量.容積式流量計試驗系統.第4部分:管道驗證操作者指南 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 4: Guide for operators of pipe provers |
| ISO 7279-1984 |
壓力管聚丙烯(PP)配件.熱熔接的管接口.米制系列.接口尺寸 |
Polypropylene (PP) fittings for pipes under pressure; Sockets for fusion using heated tools; Metric series; Dimensions of sockets |
| ISO 728-1995 |
焦炭(標稱最大粒徑大于20mm).用篩選法進行粒度分析 |
Coke (nominal top size greater than 20 mm) - Size analysis by sieving |
| ISO 7284-1993 |
電阻焊設備.汽車工業用多點點焊的兩個單獨副線圈的變壓器詳細規范 |
Resistance welding equipment; particular specifications applicable to transformers with two separate secondary windings for multi-spot welding, as used in the automobile industry |
| ISO 7285-1995 |
機械化多點焊接氣汽缸 |
Pneumatic cylinders for mechanized multiple spot welding |
| ISO 7286-1986 |
電阻焊接設備的圖形符號.兩種語言版 |
Graphical symbols for resistance welding equipment Bilingual edition |
| ISO 7287-2002 |
熱切割設備用圖形符號 |
Graphical symbols for thermal cutting equipment |
| ISO 7289-1996 |
氣焊、切削及有關加工的斷路閥用快速連接器 |
Quick-action couplings with shut-off valves for gas welding, cutting and allied processes |
| ISO 729-1988 |
含油種子.油的酸度測定 |
Oilseeds; determination of acidity of oils |
| ISO 7291-1999 |
氣焊設備.小于等于300bar的焊接、切削及相關工藝用多頭管系用壓力調節器 |
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar |
| ISO 7292-1997 |
焊接、切割和連接工藝用流量計調節器.分類和規范 |
Flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification and specifications |
| ISO 7293-1997 |
林業機械.手提式鏈鋸.發動機性能和燃料消耗 |
Forestry machinery - Portable chain-saws - Engine performance and fuel consumption |
| ISO 7294-1983 |
木工鋸的鋸齒.鋸齒齒形.術語和表示方法.兩種語言版 |
Saw teeth for woodworking saws; Profile shape; Terminology and designation Bilingual edition |
| ISO 7294-1983 |
木工鋸的鋸齒.鋸齒齒形.術語和表示方法.兩種語言版 |
Saw teeth for woodworking saws; Profile shape; Terminology and designation Bilingual edition |
| ISO 7295-1988 |
飛機輪胎氣門嘴.互換性尺寸 |
Tyre valves for aircraft; interchangeability dimensions |
| ISO 7296-1 AMD 1-1996 |
起重機.圖形符號.第1部分:總則.修改件1 |
Cranes - Graphic symbols - Part 1: General; Amendment 1 |
| ISO 7296-1-1991 |
起重機.圖形符號.第1部分:總則 |
Cranes; graphic symbols; part 1: general |
| ISO 7296-2-1996 |
起重機.圖形符號.第2部分:移動式起重機 |
Cranes - Graphical symbols - Part 2: Mobile cranes |
| ISO 7297-1985 |
信息處理.數據存儲裝置的磁盤.外徑200mm(7.9in)、內徑63.5mm(2.5in)磁盤的每列磁道的96000次磁通變換 |
Information processing; Magnetic disk for data storage devices; 96 000 flux transitions per track, 200 mm (7.9 in) outer diameter, 63,5 mm (2.5 in) inner diameter |
| ISO 7298-1985 |
信息處理.數據存儲裝置的磁盤.外徑210mm(8.3in)、內徑100mm(3.9in)磁盤的每列磁道的158000次磁通變換 |
Information processing; Magnetic disk for data storage devices; 158 000 flux transitions per track, 210 mm (8.3 in) outer diameter, 100 mm (3.9 in) inner diameter |
| ISO 7299-1996 |
柴油發動機.燃油噴射泵端面裝配的法蘭盤 |
Diesel engines - End-mounting flanges for fuel injection pumps |
| ISO 730-1 Technical Corrigendum 1-1995 |
農業輪式拖拉機.三點懸掛裝置.第1部分:1類,2類和3類.技術勘誤表1 |
Agricultural wheeled tractors - Rear-mounted three-point linkage - Part 1: Categories 1, 2, 3 and 4; Technical Corrigendum 1 |
| ISO 730-1-1994 |
農業輪式拖拉機.三點懸掛裝置.第1部分:1類,2類,3類和4類 |
Agricultural wheeled tractors - Rear-mounted three-point linkage - Part 1: Categories 1, 2, 3 and 4 |
| ISO 730-2-1979 |
農業輪式拖拉機.三點懸掛裝置.第2部分:類型IN(窄型懸掛) |
Agricultural wheeled tractors; Three-point linkage; Part 2 : Category 1 N (Narrow hitch) |
| ISO 7301-2002 |
稻谷.規范 |
Rice - Specification |
| ISO 7302-1982 |
谷類和谷類制品.脂肪總含量的測定 |
Cereals and cereal products; Determination of total fat content |
| ISO 7304-1985 |
硬粒小麥粗面粉和營養糊.由感官分析評定通心粉的烹調質量 |
Durum wheat semolinas and alimentary pasta; Estimation of cooking quality of spaghetti by sensory analysis |
| ISO 7305-1998 |
碾碎谷類.脂肪酸的測定 |
Milled cereal products - Determination of fat acidity |
| ISO 7308-1987 |
道路車輛.儲能液壓制動用的石油基制動液 |
Road vehicles; Petroleum-based brake-fluid for stored-energy hydraulic brakes |
| ISO 7309-1985 |
道路車輛.液壓制動系統.ISO石油基標準液 |
Road vehicles; Hydraulic braking systems; ISO reference petroleum base fluid |
| ISO 731-1-1977 |
工業用甲酸.試驗方法.第1部分:總則 |
Formic acid for industrial use; Methods of test; Part I : General |
| ISO 731-2-1977 |
工業用甲酸.試驗方法.第2部分:總酸度的測定.滴定法 |
Formic acid for industrial use; Methods of test; Part II : Determination of total acidity; Titrimetric method |
| ISO 731-3-1977 |
工業用甲酸.試驗方法.第3部分:其他酸含量的測定.電位滴定法 |
Formic acid for industrial use; Methods of test; Part III : Determination of content of other acids; Potentiometric method |
| ISO 731-4-1977 |
工業用甲酸.試驗方法.第4部分:無機氯化物目測限度試驗 |
Formic acid for industrial use; Methods of test; Part IV : Visual limit test for inorganic chlorides |
| ISO 731-5-1977 |
工業用甲酸.試驗方法.第5部分:無機硫酸鹽目測限度試驗 |
Formic acid for industrial use; Methods of test; Part V : Visual limit test for inorganic sulphates |
| ISO 731-6-1977 |
工業用甲酸.試驗方法.第6部分:鐵含量的測定.2,2`-聯吡啉光度法 |
Formic acid for industrial use; Methods of test; Part VI : Determination of iron content; 2,2`- Bipyridyl photometric method |
| ISO 731-7-1977 |
工業用甲酸.試驗方法.第7部分:其他揮發性酸低含量的測定.蒸餾后滴定法 |
Formic acid for industrial use; methods of test; Part VII : Determination of low contents of other volatile acids; Titrimetric method after distillation |
| ISO 7310-1993 |
柴油發動機.有水平法蘭盤的旋轉式燃油濾清器頂蓋.裝配和連接尺寸 |
Diesel engines; heads for spin-on fuel filters with horizontal flange; mounting and connecting dimensions |
| ISO 7311-1993 |
柴油發動機.有垂直法蘭盤的旋轉式燃油濾清器頂蓋.裝配和連接尺寸 |
Diesel engines; heads for fuel filters with vertical flange; mounting and connecting dimensions |
| ISO 7312-1984 |
道路車輛.空氣過濾器連接.A型和B型 |
Road vehicles; Air filter connections; Types A and B |
| ISO 7313-1984 |
飛機.聚四氟乙烯(PTFE)制的高溫盤曲軟管裝置 |
Aircraft; High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) |
| ISO 7314-2002 |
航空航天.液壓系統.金屬軟管組件 |
Aerospace - Fluid systems - Metal hose assemblies |
| ISO 7315-1988 |
航空航天.流體動力管道安裝用的P”形夾(環狀?yuàn)A).尺寸 |
Aerospace; P clamps (loop clamps) for fluid systems; envelope dimensions |
| ISO 7319-1992 |
航空航天.流體動力系統.24度錐形連接器接口 |
Aerospace; fluid systems; interface of 24 cone metric couplings |
| ISO 732-2000 |
攝影技術.120和220尺寸的膠片.尺寸 |
Photography - 120-size and 220-size films - Dimensions |
| ISO 7320-1992 |
航空航天.流體系統螺紋聯接器和密封連接器.尺寸 |
Aerospace; couplings, threaded and sealed, for fluid systems; dimensions |
| ISO 7322-2000 |
復合軟木.試驗方法 |
Composition cork - Test methods |
| ISO 7323 Technical Corrigendum 1-2003 |
生橡膠和非硫化混合的橡膠.可塑值和回收值的測定.平行板法.技術勘誤1 |
Rubber, raw and unvulcanized compounded - Determination of plasticity number and recovery number - Parallel plate method; Technical Corrigendum 1 |
| ISO 7323 Technical Corrigendum 1-2003 |
生橡膠和非硫化混合的橡膠.可塑值和回收值的測定.平行板法.技術勘誤1 |
|
| ISO 7323-1985 |
非硫化混合的生膠.可塑值和回收值的測定.平行板法 |
Rubber, raw and unvulcanized compounded; Determination of plasticity number and recovery number; Parallel plate method |
| ISO 7323-1985 |
非硫化混合的生膠.可塑值和回收值的測定.平行板法 |
Rubber, raw and unvulcanized compounded; Determination of plasticity number and recovery number; Parallel plate method |
| ISO 7326-1991 |
橡膠和塑料軟管.靜態條件下的耐臭氧性試驗的評定 |
Rubber and plastics hoses; assessment of ozone resistance under static conditions |
| ISO 7327-1994 |
塑料.環氧樹脂用固化劑和催化劑.酸酐中游離酸測定 |
Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride |
| ISO 7328-1999 |
以奶為基料的食用冰制品和冰配制食品.脂肪含量的測定.重量分析法(參比法) |
Milk-based edible ices and ice mixes - Determination of fat content - Gravimetric method (Reference method) |
| ISO 7329-1989 |
攝影技術.幻燈放映機.用玻璃夾層試片對圖象區溫升的測定 |
Photography; slide projectors; determination of temperature rise in the picture area using a glass sandwich test slide |
| ISO 7331-1990 |
高山滑雪桿.安全要求和試驗方法 |
Ski-poles for alpine skiing; safety requirements and test methods |
| ISO 7332-1998 |
航空航天.沉孔浮動式MJ螺紋雙耳縮徑系列自鎖螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa(室溫)/425℃.尺寸 |
Aerospace - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 C, 1100 MPa (at ambient temperature)/315 C and 1100 MPa (at ambient temperature)/425 C - D |
| ISO 7335-1987 |
鐵礦石.化合水含量的測定.卡爾費舍爾(Karl Fesher)滴定法 |
Iron ores; Determination of combined water content; Karl Fischer titrimetric method |
| ISO 7336-1984 |
石棉水泥管道.液力計算導則 |
Asbestos-cement pipelines; Guidelines for hydraulic calculation |
| ISO 7337-1984 |
石棉增強水泥制品.現場工作實踐導則 |
Asbestos reinforced cement products; Guidelines for on-site work practices |
| ISO 734-1-1998 |
油料種子殘?jiān)?油含量測定.第1部分:己烷(或石油醚)萃取法 |
Oilseed residues - Determination of oil content - Part 1: Extraction method with hexane (or light petroleum) |
| ISO 734-2-1998 |
油料種子殘?jiān)?油含量測定.第2部分:快速萃取法 |
Oilseed residues - Determination of oil content - Part 2: Rapid extraction method |
| ISO 7341-2000 |
銀行業務.銀行往來帳戶對帳表 |
Banking - Nostro accounts reconciliation |
| ISO 7342-1982 |
道路車輛.故障判斷系統.點火系統試驗設備 |
Road vehicles; Diagnostic systems; Equipment for ignition systems testing |
| ISO 7343-1993 |
電影技術.在35mm電影拷貝上雙聲軌攝影錄音.位置和寬度尺寸 |
Cinematography; two-track photographic sound records on 35 mm motion-picture prints; positions and width dimensions |
| ISO 7345-1987 |
熱絕緣.物理量與定義 |
Thermal insulation; Physical quantities and definitions |
| ISO 7346-1-1996 |
水質.對淡水魚(Brachydanio rerio,Hamilton-Buchanan(真骨下綱,鯉科))急性致死物質毒性的測定.第1部分:靜態法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 1: Static method |
| ISO 7346-2-1996 |
水質.對淡水魚(Brachydanio rerio,Hamilton-Buchanan(真骨下綱,鯉科))急性致死物質毒性的測定.第2部分:半靜態法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 2: Semi-static method |
| ISO 7346-3-1996 |
水質.對淡水魚(Brachydanio rerio,Hamilton-Buchanan(真骨下綱,鯉科))急性致死物質毒性的測定.第4部分:直流法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 3: Flow-through method |
| ISO 7347-1987 |
鐵合金.檢驗取樣和樣品制備偏差的實驗方法 |
Ferroalloys; Experimental methods for checking the bias of sampling and sample preparation |
| ISO 7348-1992 |
玻璃容器.制造用詞匯 |
Glass containers; manufacture; vocabulary |
| ISO 7349-1983 |
熱塑塑料閥.連接基準 |
Thermoplastics valves; Connection references |
| ISO 735-1977 |
油料種子殘?jiān)?鹽酸不溶性灰分的測定 |
Oilseed residues; Determination of ash insoluble in hydrochloric acid |
| ISO 7353-1985 |
玫瑰木油.α-萜品醇含量的測定.在填充塔中用氣相色譜法測定 |
Oil of rosewood; determination of alpha-terpineol content; gas chromatographic method on packed columns |
| ISO 7355-1985 |
黃樟油和肉豆蔻油.黃樟素和順式及反式異黃樟素含量的測定.在填充塔中用氣相色譜法測定 |
Oils of sassafras and nutmeg; Determination of safrole and cis- and trans-isosafrole content; Gas chromatographic method on packed columns |
| ISO 7356-1985 |
含酮的側柏油和鼠尾草油(Salvia officinalis).α和β側柏酮含量的測定.在填充塔中用氣相色譜法測定 |
Oils of thujone-containing Artemisia and oil of sage (Salvia officinalis Linnaeus); Determination of alpha- and beta-thujone content; Gas chromatographic method on packed columns |
| ISO 7357-1985 |
白菖油.順式β細辛腦含量的測定.在填充塔中用氣相色譜法測定 |
Oil of calamus; Determination of cis-beta-asarone content; Gas chromatographic method on packed columns |
| ISO 7358-2002 |
全部或部分在香檸檬烯中稀釋的香檸檬油、檸檬油、香櫞油和萊姆酸橙油.用高壓液相色譜法測定香檸檬烯的含量(HPLC) |
Oils of bergamot, lemon, citron and lime, fully or partially reduced in bergapten - Determination of bergapten content by high-pressure liquid chromatography (HPLC) |
| ISO 7359-1985 |
香精油.在填充塔中用氣相色譜法分析.一般方法 |
Essential oils; Analysis by gas chromatography on packed columns; General method |
| ISO 7361-1986 |
建筑物性能標準.用同樣來源的構件制成的立面性能級別表示法 |
Performance standards in building; Presentation of performance levels of facades made of same-source components |
| ISO 7363-1986 |
起重機和提升設備.技術特性和驗收文件 |
Cranes and lifting appliances; Technical characteristics and acceptance documents |
| ISO 7364-1983 |
造船和海上建筑物.甲板機械.舷梯絞車 |
Shipbuilding and marine structures - Deck machinery - Accommodation ladder winches |
| ISO 7365-1983 |
造船和海上建筑物.甲板機械.深海用拖曳絞車 |
Shipbuilding and marine structures; Deck machinery; Towing winches for deep sea use |
| ISO 7366-1987 |
動植物脂肪和油.1-甘油-酸酯和游離甘油含量的測定 |
Animal and vegetable fats and oils; Determination of 1-monoglycerides and free glycerol contents |
| ISO 7368-1989 |
液壓傳動.二油口插裝式閥.腔室 |
Hydraulic fluid power; two-port slip-in cartridge valves; cavities |
| ISO 7369-1995 |
管道工程.柔性金屬軟管.一般術語詞匯 |
Pipework - Flexible metallic hoses - Vocabulary of general terms |
| ISO 7369-2004 |
管道工程.金屬軟管和軟管組件.詞匯 |
|
| ISO 737-1975 |
針葉樹鋸材.尺寸.測量方法 |
(Coniferous sawn timber; Sizes; Methods of measurement) |
| ISO 7370-1983 |
玻璃纖維增強熱固性塑料(GRP)管和配件.公稱直徑,規定直徑和標準長度 |
Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings; Nominal diameters, specified diameters and standard lengths |
| ISO 7371 AMD 1-1997 |
家用冷凍設備.有或沒有低溫隔層的冰箱.特征和試驗方法.補充件1:強烈易腐食品防腐用特殊冷凍室 |
(Household refrigerating appliances - Refrigerators with or without low-temperature compartment - Characteristics and test methods; Amendment 1: Special compartments for the preservation of highly perishable foodstuffs) |
| ISO 7371-1995 |
家用冷凍設備.有低溫隔層和無低溫隔層的冰箱特性和試驗方法 |
(Household refrigerating appliances - Refrigerators with or without low-temperature compartment - Characteristics and test methods) |
| ISO 7372-1993 |
貿易數據名錄.UNTDED 1993.第1篇:標準數據 |
(Trade data elements directory; UNTDED 1993; volume 1: standard data elements) |
| ISO 7373-1987 |
鐵合金.檢驗樣品組成部分精度的實驗方法 |
(Ferroalloys; Experimental methods for checking the precision of sample division) |
| ISO 7375-1-1986 |
道路車輛.汽車和拖掛車輛之間氣壓制動連接裝置的蛇形管裝置.第1部分:尺寸 |
(Road vehicles; Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles; Part 1 : Dimensions) |
| ISO 7375-2-1998 |
道路車輛.牽引車和拖掛車輛之間氣壓制動連接裝置的蛇形管裝置.第2部分:性能要求 |
(Road vehicles - Coiled tube assemblies for air brake connection between towing and towed vehicles - Part 2: Performance requirements) |
| ISO 7376-1-1994 |
喉鏡配件.第1部分:鉤接式有柄刀片裝置 |
(Laryngoscopic fittings - Part 1: Conventional hook-on type handle-blade fittings) |
| ISO 7376-2-1997 |
喉鏡檢查器.第2部分:微型電燈.螺紋和插座 |
(Laryngoscopic fittings - Part 2: Miniature electric lamps - Screw threads and sockets for conventional blades) |
| ISO 7376-2003 |
麻醉和呼吸設備.氣管插管術用喉鏡 |
|
| ISO 7376-3-1996 |
喉鏡檢查器.第3部分:纖維照明可重復使用的剛性喉鏡 |
(Laryngoscopic fittings - Part 3: Fibre-illuminated re-usable rigid laryngoscopes) |
| ISO 7377-1984 |
刺柏果(Juniperus communis Linnaeus).規范 |
(Juniper berries (Juniperus communis Linnaeus); Specification) |
| ISO 7378-1983 |
緊固件.螺栓、螺釘和雙頭螺柱.開口銷孔和穿絲孔 |
(Fasteners; Bolts, screws and studs; Split pin holes and wire holes) |
| ISO 7379-1983 |
內六角頭有肩螺釘 |
Hexagon socket head shoulder screws |
| ISO 738-1981 |
針葉樹鋸材.尺寸.允許偏差和收縮率 |
Coniferous sawn timber; Sizes; Permissible deviations and shrinkage |
| ISO 7380-1997 |
內六角圓頭螺釘 |
Hexagon socket button head screws |
| ISO 7380-2004 |
內六角平圓頭螺釘 |
|
| ISO 7381-1986 |
工業用丁二烯.低聚物的測定.氣相色譜法 |
Butadiene for industrial use; Determination of oligomers; Gas chromatographic method |
| ISO 7382-1986 |
工業用乙烯.液相和氣相取樣 |
Ethylene for industrial use; Sampling in the liquid and the gaseous phase |
| ISO 7384-1986 |
人造大氣環境的腐蝕試驗.一般要求 |
(Corrosion tests in artificial atmosphere; General requirements) |
| ISO 7385-1983 |
核電站.收集可靠性資料的質量保證導則 |
(Nuclear power plants; Guidelines to ensure quality of collected data on reliability) |
| ISO 7386-1984 |
茴香子(Pimpinella anisum Linnaeus)規范 |
(Aniseed (Pimpinella anisum Linnaeus); Specification) |
| ISO 7387-1-1983 |
塑聚氯乙烯管零件組裝用有溶劑的粘合劑.特性.第1部分:基本試驗方法 |
(Adhesives with solvents for assembly of u PVC pipe elements; Characterization; Part 1 : Basic test methods) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com