標準號 |
中文名稱 |
英文名稱 |
| ISO 12958-1999 |
土工和土工相關產品.水平水流容量的測定 |
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane |
| ISO 12965-2000 |
丁二烯橡膠.用紅外線光譜法測定微觀結構 |
Butadiene rubber - Determination of microstructure by infra-red spectrometry |
| ISO 12977-1999 |
鋁制品用含碳物質.電極用瀝青.揮發物含量的測定 |
Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of volatile matter content |
| ISO 12979-1999 |
鋁制品用含碳物質.電極用瀝青.喹啉不溶物中C/H比率的測定 |
Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of C/H ratio in the quinoline-insoluble fraction |
| ISO 12980-2000 |
用于鋁生產的碳素物.電極用未煅燒焦炭和煅燒焦炭.用X射線熒光光譜法分析 |
Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for electrodes - Analysis using an X-ray fluorescence method |
| ISO 12981-1-2000 |
鋁生產中使用的含碳材料.煅燒焦炭.二氧化碳的活性測定.第1部分:質量損失法 |
Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method |
| ISO 12982-1-2000 |
生產鋁用含碳材料.煅燒焦炭.對空氣活性的測定.第1部分:點火溫度法 |
Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to air - Part 1: Ignition temperature method |
| ISO 12984-2000 |
用于生產鋁的碳素材料.煅燒焦炭.粒度分布的測定 |
Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of particle size distribution |
| ISO 12985-1-2000 |
用于生產鋁的碳素材料.焙燒陽極和陰極塊.第1部分:用尺寸法測定表觀密度 |
Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 1: Determination of apparent density using a dimensions method |
| ISO 12985-2-2000 |
用于生產鋁的碳素材料.焙燒陽極和陰極塊.第2部分:用靜流法測定表觀密度和開口孔隙率 |
Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 2: Determination of apparent density and of open porosity using a hydrostatic method |
| ISO 12986-1-2000 |
用于生產鋁的碳素材料.預焙燒陽極和陰極塊.第1部分:用三點法測定抗彎強度/剪切強度 |
Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by a three-point method |
| ISO 12987-2004 |
鋁制品用碳質材料.陽極、陰極塊、側壁磚和烤灌糊.使用比較法進行熱傳導性的測定 |
|
| ISO 12988-1-2000 |
用于生產鋁的碳素物.焙燒陽極.二氧化碳活性的測定.第1部分:質量損耗方法 |
Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method |
| ISO 12988-2-2004 |
鋁生產用碳素材料.焙燒陽極.二氧化碳反應性的測定.第2部分:熱解重量分析法 |
|
| ISO 12989-1-2000 |
鋁生產中用的碳素材料.焙燒陽極和側壁磚.測定對空氣的揮發性 |
Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 1: Loss in mass method |
| ISO 12989-2-2004 |
鋁生產用碳素材料.焙燒陽極和部碳塊.空氣反應性的測定.第2部分:熱重分析法 |
|
| ISO 12992-1995 |
塑料制品.塑料薄膜和薄板垂直燃燒蔓延程序的測定 |
Plastics - Vertical flame spread determination for film and sheet |
| ISO 13-1978 |
壓力管線用灰口鐵管、特種鑄件和灰口鐵部件 |
Grey iron pipes, special castings and grey iron parts for pressure main lines |
| ISO 13000-1-1997 |
塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求和設計 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation |
| ISO 13000-2-1997 |
塑料.聚四氟乙烯(PTFE)半成品.第2部分:試樣的制備和特性的測定 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties |
| ISO 13002-1998 |
碳纖維.長絲紗命名體制 |
Carbon fibre - Designation system for filament yarns |
| ISO 13003-2003 |
纖維增強塑料.周期性荷載條件下疲勞特性的測定 |
|
| ISO 13006-1998 |
瓷磚.定義、分類、特性和標記 |
Ceramic tiles - Definitions, classification, characteristics and marking |
| ISO 13007-1-2004 |
瓷磚.灰漿和膠粘劑.第1部分:膠粘劑的術語、定義和規范 |
|
| ISO 13007-3-2004 |
瓷磚.灰漿和膠粘劑.第3部分:灰漿的術語、定義和規范 |
|
| ISO 13012 Technical Corrigendum 1-1999 |
滾動軸承.線性運動.循環球,套管型.附件.技術勘誤1 |
Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories; Technical corrigendum 1 |
| ISO 13012-1998 |
套筒式線性運動循環球滾動軸承.附件 |
Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories |
| ISO 1302-2002 |
產品幾何量技術規范.技術產品文件中表面結構的表示方式 |
Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation |
| ISO 1304-1999 |
橡膠配方配合劑.炭黑.碘吸收值的測定.滴定法 |
Rubber compounding ingredients - Carbon black - Determination of iodine adsorption number - Titrimetric method |
| ISO 13041-1-2004 |
數控立式車床和轉向中心的試驗條件.第1部分:有水平工件夾緊軸的機床的幾何試驗 |
|
| ISO 13041-4-2004 |
數控立式車床和轉向中心的試驗條件.第4部分:線性和旋轉軸定位的精確度和可重復性 |
|
| ISO 13041-7-2004 |
數控立式車床和轉向中心的試驗條件.第7部分:坐標平面上等高線特性評價 |
|
| ISO 13041-8-2004 |
數控立式車床和轉向中心的試驗條件.第8部分:熱變形的評價 |
|
| ISO 13050-1999 |
曲線齒狀同步皮帶傳動系統 |
Curvilinear toothed synchronous belt drive systems |
| ISO 1306-1995 |
橡膠配方配合劑.炭黑.(粒狀).澆鑄密度的測定 |
Rubber compounding ingredients - Carbon black (pelletized) - Determination of pour density |
| ISO 1307-1992 |
工業通用橡膠和塑料軟管.孔直徑和公差.長度公差 |
Rubber and plastics hoses for general-purpose industrial applications; bore diameters and tolerances, and tolerances on length |
| ISO 13090-1-1998 |
機械振動和沖擊.試驗及與人有關的實驗安全方面指南.第1部分:機械振動和反復沖擊下的試驗 |
Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock |
| ISO 13091-1-2001 |
機械振動.神經機能障礙評定的振動觸感閾.第1部分:指尖上的測量方法 |
Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction - Part 1: Methods of measurement at the fingertips |
| ISO 13091-2-2003 |
機械振動.評定神經官能紊亂用振動感知閾值.第2部分:指尖測量分析和解釋 |
(Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction - Part 2: Analysis and interpretation of measurements at the fingertips) |
| ISO 13091-2-2003 |
機械振動.評定神經官能紊亂用振動感知閾值.第2部分:指尖測量分析和解釋 |
|
| ISO 132-1999 |
硫化和熱塑橡膠.折曲裂縫和裂縫增長的測定 |
Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) |
| ISO 13200-1995 |
起重機.安全信號和危險圖示.總則 |
Cranes - Safety signs and hazard pictorials - General principles |
| ISO 13202-2003 |
起重機.速度和時間參數的測量 |
(Cranes - Measurement of velocity and time parameters) |
| ISO 13202-2003 |
起重機.速度和時間參數的測量 |
|
| ISO 13212-1999 |
眼科光學.接觸鏡保護產品.儲存壽命的測定指南 |
Ophthalmic optics - Contact lens care products - Guidelines for the determination of shelf-life |
| ISO 13215-2-1999 |
道路車輛.兒童限制系統錯用危險的減少.第2部分:正確裝配的要求和試驗過程(薄板法) |
Road vehicles - Reduction of misuse risk of child restraint systems - Part 2: Requirements and test procedures for correct installation (panel method) |
| ISO 13215-3-1999 |
道路車輛.兒童固定系統錯使用危險性的降低.第3部分:用錯使用模式和效果分析(MMEA)對錯使用的預測和評估 |
Road vehicles - Reduction of misuse risk of child restraint systems - Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA) |
| ISO 13216-1-1999 |
道路車輛.兒童減震系統用車輛錨具和錨具附件.第1部分:座位彎曲錨具及附件 |
Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments |
| ISO 13216-2-2004 |
道路車輛.兒童約束系統在車內的固定點及主固定點的安裝.第2部分:頂部系留的固定點及其連接 |
|
| ISO 13218-1998 |
道路車輛.兒童保護系統.有兒童乘客的事故報告格式 |
Road vehicles - Child restraint systems - Report form for accidents involving child passengers |
| ISO 13226-1999 |
橡膠.液體對硫化橡膠影響的表征用標準參考彈性體(SREs) |
Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
| ISO 13230-1999 |
眼科光學.條形碼規范 |
Ophthalmic optics - Bar code specifications |
| ISO 13232-1-1996 |
摩托車.適用于摩托車駕駛員沖擊保護設備的試驗和分析程序.第1部分:定義、符號和一般考慮 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1: Definitions, symbols and general considerations |
| ISO 13232-2-1996 |
摩托車.適用于摩托車駕駛員沖擊保護設備的試驗和分析程序.第2部分:與事故數據有關的沖擊條件的定義 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 2: Definition of impact conditions in relation to accident data |
| ISO 13232-3-1996 |
摩托車.適用于摩托車駕駛員沖擊保護設備的試驗和分析程序.第3部分:人體測量的沖擊模型 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3: Anthropometric impact dummy |
| ISO 13232-4-1996 |
摩托車.適用于摩托車駕駛員沖擊保護設備的試驗和分析程序.第4部分:被測量的變量、儀器儀表和測量程序 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 4: Variables to be measured, instrumentation and measurement procedures |
| ISO 13232-5-1996 |
摩托車.適用于摩托車駕駛員沖擊保護設備的試驗和分析程序.第5部分:損害系數和保險額/保險賠償費分析 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5: Injury indices and risk/benefit analysis |
| ISO 13232-6-1996 |
摩托車.適用于摩托車駕駛員沖擊保護設備的試驗和分析程序.第6部分:全尺度內的沖擊試驗程序 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Full-scale impact-test procedures |
| ISO 13232-7-1996 |
摩托車.適用于摩托車駕駛員沖擊保護設備的試驗和分析程序.第7部分:摩托車沖擊試驗的計算機模擬演示的標準程序 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests |
| ISO 13232-8-1996 |
摩托車.適用于摩托車駕駛員沖擊保護設備的試驗和分析程序.第8部分:文獻工作和報告 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8: Documentation and reports |
| ISO 1324-1985 |
實心木拼花地板.橡木條的分類 |
Solid wood parquet; Classification of oak strips |
| ISO 13253-1995 |
導管式空調器和氣對氣加熱泵.性能的檢測和額定功率 |
Ducted air-conditioners and air-to-air heat pumps - Testing and rating for performance |
| ISO 13256-1-1998 |
水源熱泵.性能試驗和功率測量.第1部分:水-氣體和鹽水-氣體熱泵 |
Water-source heat pumps - Testing and rating for performance - Part 1: Water-to-air and brine-to-air heat pumps |
| ISO 13256-2-1998 |
水源熱泵.性能試驗和功率測量.第2部分:水-水和鹽水-水熱泵 |
Water-source heat pumps - Testing and rating for performance - Part 2: Water-to-water and brine-to-water heat pumps |
| ISO 13261-1-1998 |
空調設備和空氣源熱泵設備的聲級額定值.第1部分:無戶外管道設備 |
Sound power rating of air-conditioning and air-source heat pump equipment - Part 1: Non-ducted outdoor equipment |
| ISO 13261-2-1998 |
空調設備和空氣源熱泵設備的聲級額定值.第2部分:無戶內管道設備 |
Sound power rating of air-conditioning and air-source heat pump equipment - Part 2: Non-ducted indoor equipment |
| ISO 13276-1997 |
煙草及其制品.煙堿純度的測定.使用鎢硅酸的重量分析法 |
Tobacco and tobacco products - Determination of nicotine purity - Gravimetric method using tungstosilicic acid |
| ISO 1328-2-1997 |
圓柱齒輪.ISO 體系的準確度.第2部分:有關放射要素偏差度和輸出信息的相應偏差的容許值和定義 |
Cylindrical gears - ISO system of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| ISO 13281-1997 |
自動化系統.制造自動化程序環境.建筑物功能 |
Industrial automation systems - Manufacturing Automation Programming Environment (MAPLE) - Functional architecture |
| ISO 13281-2-2000 |
工業自動化系統和集成.制造自動化編程環境(MAPLE).第2部分:服務設施和接口 |
Industrial automation systems and integration - Manufacturing Automation Programming Environment (MAPLE) - Part 2: Services and interfaces |
| ISO 13284-2003 |
叉車.叉形臂擴展部分和能自由伸縮的叉形臂.技術特性和強度要求 |
(Fork-lift trucks - Fork-arm extensions and telescopic fork arms - Technical characteristics and strength requirements) |
| ISO 13284-2003 |
叉車.叉形臂擴展部分和能自由伸縮的叉形臂.技術特性和強度要求 |
|
| ISO 13291-1997 |
硫化鋅濃度.鋅含量的測定.溶解淬取法和EDTA滴定法 |
Zinc sulfide concentrates - Determination of zinc content - Solvent extraction and EDTA titrimetric method |
| ISO 13292-1997 |
銅,鉛和鋅硫化物濃度.抽樣偏差的檢查和試驗方法 |
Copper, lead and zinc sulfide concentrates - Experimental methods for checking the bias of sampling |
| ISO 13294-1997 |
牙鉆手柄.牙鉆氣動機 |
Dental handpieces - Dental air-motors |
| ISO 13295-1994 |
牙科旋切器.心軸 |
Dental rotary instruments - Mandrels |
| ISO 13296 Technical Corrigendum 1-2000 |
柴油發動機.高壓燃料噴射管組件.一般要求和尺寸.技術勘誤1 |
Diesel engines - High-pressure fuel injection pipe assemblies - General requirements and dimensions; Technical Corrigendum 1 |
| ISO 13296-1997 |
柴油發動機.高壓燃料噴射管組件.一般要求和尺寸 |
Diesel engines - High-pressure fuel injection pipe assemblies - General requirements and dimensions |
| ISO 13297-2000 |
小型船舶.電氣系統.交流電設備 |
Small craft - Electrical systems - Alternating current installations |
| ISO 13299-2003 |
感官分析.方法論.確立感覺曲線的通用指南 |
Sensory analysis - Methodology - General guidance for establishing a sensory profile |
| ISO 13299-2003 |
感官分析.方法論.確立感覺曲線的通用指南 |
|
| ISO 13301-2002 |
感官分析.方法學.用三點選配(3-AFC)法測定氣味、香味和味覺探測閾值的通用指南 |
Sensory analysis - Methodology - General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure |
| ISO 13302-2003 |
感官分析.由包裝引起的食品味道改變的評定方法 |
(Sensory analysis - Methods for assessing modifications to the flavours of foodstuffs due to packaging) |
| ISO 13302-2003 |
感官分析.由包裝引起的食品味道改變的評定方法 |
|
| ISO 13310-1997 |
鐵礦石.用燃燒原子吸收光譜測定法測定鋅含量 |
Iron ores - Determination of zinc content - Flame atomic absorption spectrometric method |
| ISO 13311-1997 |
鐵礦石.用燃燒原子吸收光譜測定法測定鉛含量 |
Iron ores - Determination of lead content - Flame atomic absorption spectrometric method |
| ISO 13312-1997 |
鐵礦石.鉀含量的測定.火焰原子吸收分光光度法 |
Iron ores - Determination of potassium content - Flame atomic absorption spectrometric method |
| ISO 13313-1997 |
鐵礦石.鈉含量的測定.火焰原子吸收分光光度法 |
Iron ores - Determination of sodium content - Flame atomic absorption spectrometric method |
| ISO 13317-1-2001 |
用重力液體沉淀法測定粒度分布.第1部分:通則和導則 |
Determination of particle size distribution by gravitational liquid sedimentation methods - Part 1: General principles and guidelines |
| ISO 13317-2-2001 |
用重力液體沉淀法測定粒度分布.第2部分:固定移液管法 |
Determination of particle size distribution by gravitational liquid sedimentation methods - Part 2: Fixed pipette method |
| ISO 13317-3-2001 |
用重力液體沉淀法測定粒度分布.第3部分:X射線重力技術 |
Determination of particle size distribution by gravitational liquid sedimentation methods - Part 3: X-ray gravitational technique |
| ISO 13318-1-2001 |
用離心液體沉淀法測定粒度分布.第1部分:通用原則和導則 |
Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 1: General principles and guidelines |
| ISO 13318-2-2001 |
用離心液體沉淀法測定粒度分布.第2部分:光照離心法 |
Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method |
| ISO 13318-3-2004 |
用離心液體沉積法測定粒度分布.第3部分:離心X射線法 |
|
| ISO 13319-2000 |
粒度分部的測定.電感應區方法 |
Determination of particle size distributions - Electrical sensing zone method |
| ISO 13320-1-1999 |
粒度分析.激光衍射方法.第1部分:一般規則 |
Particle size analysis - Laser diffraction methods - Part 1: General principles |
| ISO 13321-1996 |
粒度分析.相關光量子光譜學 |
Particle size analysis - Photon correlation spectroscopy |
| ISO 13323-1-2000 |
粒度分布的測定.單粒子光干擾法.第1部分:光干擾問題 |
Determination of particle size distribution - Single-particle light interaction methods - Part 1: Light interaction considerations |
| ISO 13325-2003 |
輪胎.輪胎到道路所排聲音測量的Coast-by法 |
Tyres - Coast-by methods for measurement of tyre-to-road sound emission |
| ISO 13325-2003 |
輪胎.輪胎到道路所排聲音測量的Coast-by法 |
|
| ISO 13326-1998 |
測量輪胎均勻度的試驗方法 |
Test methods for measuring tyre uniformity |
| ISO 13327-1998 |
摩托車輪胎.滾動阻力的測量方法 |
Motorcycle tyres - Method of measuring rolling resistance |
| ISO 13328-2000 |
摩托車輪胎.輪胎滾動圓周的測量.載重新輪胎 |
Motorcycle tyres - Measurement of tyre rolling circumference - Loaded new tyres |
| ISO 13331-1995 |
道路車輛.摩托車燃料箱的開口和注油管.蒸氣回收系統 |
Road vehicles - Filler pipes and openings of motor vehicle fuel tanks - Vapour recovery system |
| ISO 13332-2000 |
往復式內燃機.在發動機底部測量的發自高速和中速往復式內燃機的結構噪聲的試驗規范 |
Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet |
| ISO 13333-1994 |
地面移動機械.翻斗車身支架和操作艙翻轉支架裝置 |
Earth-moving machinery - Dumper body support and operator`s cab tilt support devices |
| ISO 13337-1997 |
彈簧型直銷.輕型,有槽的 |
Spring-type straight pins - Slotted, light duty |
| ISO 13340-2001 |
可運輸氣瓶.不可再充填的氣瓶用鋼瓶閥門.規范和原型試驗 |
Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing |
| ISO 13340-2001 |
可運輸氣瓶.不可再充填的氣瓶用鋼瓶閥門.規范和原型試驗 |
Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing |
| ISO 13341 Technical Corrigendum 1-1998 |
可運輸儲氣瓶.儲氣瓶閥的裝配.技術勘誤1 |
Transportable gas cylinders - Fitting of valves to gas cylinders; Technical Corrigendum 1 |
| ISO 13341-1997 |
可運輸儲氣瓶.儲氣瓶閥配件 |
Transportable gas cylinders - Fitting of valves to gas cylinders |
| ISO 13342-1995 |
小型船舶.舷外發動機靜推力的測量 |
Small craft - Static thrust measurement for outboard motors |
| ISO 13344-1996 |
燃燒流出物致死毒性的測定 |
Determination of the lethal toxic potency of fire effluents |
| ISO 13344-2004 |
火焰中致命毒性的評估 |
|
| ISO 13347-1-2004 |
工業風扇.標準化實驗室條件下風扇聲功率級的測定.第1部分:總攬 |
|
| ISO 13347-2-2004 |
工業風扇.標準化實驗室條件下風扇聲功率級的測定.第2部分:混響室法 |
|
| ISO 13347-3-2004 |
工業風扇.標準化實驗室條件下風扇聲功率級的測定.第3部分:包絡面法 |
|
| ISO 13347-4-2004 |
工業風扇.標準化實驗室條件下風扇聲功率級的測定.第4部分:聲強法 |
|
| ISO 13349-1999 |
工業電扇.類別的定義和詞匯 |
Industrial fans - Vocabulary and definitions of categories |
| ISO 13350-1999 |
工業電扇.射流風扇的性能試驗 |
Industrial fans - Performance testing of jet fans |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com