標準號 |
中文名稱 |
英文名稱 |
| EN ISO 11126-8-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的技術要求第8部分：橄欖石砂 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993) |
| EN ISO 11127-1-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的試驗方法第1部分：抽樣 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993) |
| EN ISO 11127-2-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的試驗方法第2部分：顆粒尺寸分布的測定 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993) |
| EN ISO 11127-3-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的試驗方法第3部分：表觀密度測定 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993) |
| EN ISO 11127-4-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的試驗方法第4部分：通過玻璃載片試驗評定硬度 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993) |
| EN ISO 11127-5-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的試驗方法第5部分：含水量測定 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993) |
| EN ISO 11127-6-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的試驗方法第6部分：通過測量電導率測定水溶性雜質 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993) |
| EN ISO 11127-7-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的試驗方法第7部分：水溶性氯化物的測定 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993) |
| EN ISO 11130-1999 |
金屬與合金的腐蝕鹽溶液中的交替浸入試驗 |
Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:1999) |
| EN ISO 11143-1999 |
牙科設備汞齊合金分離器 |
Dental equipment - Amalgam separators (ISO 11143:1999) |
| EN ISO 11144-1996 |
牙科設備供水及排水管接頭 |
Dental equipment - Connections for supply and waste lines (ISO 11144:1995) |
| EN ISO 11145-2001 |
光學和光學儀器激光和激光設備詞匯和符號 |
Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2001) |
| EN ISO 11146-1999 |
激光和激光設備激光束參數的試驗方法束寬、發散角和束擴散因子 |
Lasers and laser-related equipment - Test methods for laser beam parameters - Beam widths, divergence angle and beam propagation factor (ISO 11146:1999) |
| EN ISO 11149-1997 |
光學和光學儀器激光和激光設備非電信激光設備用光纖連接器 |
Optics and optical instruments - Lasers and laser-related equipment - Fibre optic connectors for non-telecommunication laser applications (ISO 11149:1997) |
| EN ISO 11151-1-2000 |
激光和激光設備標準光學件第1部分：紫外線、可見和近紅外光譜范圍用件 |
Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral range (ISO 11151-1:2000) |
| EN ISO 11151-2-2000 |
激光和激光設備標準光學件第2部分：紅外光譜范圍用件 |
Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000) |
| EN ISO 1119-2002 |
產品幾何量技術規范(GPS)錐度和錐度角系列 |
Geometrical Product Specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:1998) |
| EN ISO 11196-1997 |
麻醉氣體監視器(包括技術勘誤1) |
Aneasthetic gas monitors (ISO 11196:1995 including Technical Corrigendum 1:1997) |
| EN ISO 11197-2004 |
醫療供電設備 |
|
| EN ISO 11199-1-1999 |
雙臂操作的助步器要求和試驗方法第1部分：步行支架 |
Walking aids manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:1999) |
| EN ISO 11199-2-1999 |
雙臂操作的助步器要求和試驗方法第2部分：滾動器 |
Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:1999) |
| EN ISO 1120-2002 |
輸送帶機械接頭的強度測定靜態試驗法 |
Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2002) |
| EN ISO 11203-1995 |
聲學機器和設備發射的噪聲從聲功率級測定工作位置和其他指定位置發射聲壓級 |
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| EN ISO 11210-1995 |
鉑合金首飾中含鉑量的測定氯鉑酸銨沉淀后重量法 |
Determination of platinum in platinum jewellery alloys - Gravimetric method after precipation of diammonium hexachloroplatinate (ISO 11210:1995) |
| EN ISO 11212-1-1997 |
淀粉和淀粉制品重金屬含量第1部分：用原子吸收光譜法測定砷含量 |
Starch and derived products - Heavy metals content - Part 1: Determination of arsenic content by atomic absorption spectrometry (ISO 11212-1:1997) |
| EN ISO 11212-2-1997 |
淀粉和淀粉制品重金屬含量第2部分：用原子吸收光譜法測定汞含量 |
Starch and derived products - Heavy metals content - Part 2: Determination of mercury content by atomic absorption spectrometry (ISO 11212-2:1997) |
| EN ISO 11212-3-1997 |
淀粉和淀粉制品重金屬含量第3部分：用電熱原子化原子吸收光譜法測定鉛含量 |
Starch and derived products - Heavy metals content - Part 3: Determination of lead content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-3:1997) |
| EN ISO 11212-4-1997 |
淀粉和淀粉制品重金屬含量第4部分：用電熱原子化原子吸收光譜法測定鎘含量 |
Starch and derived products - Heavy metals content - Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-4:1997) |
| EN ISO 11213-1995 |
改良淀粉乙�；康臏y定酶催化法 |
Modified starch - Determination of acetyl content - Enzymatic method (ISO 11213:1995) |
| EN ISO 11214-1996 |
改良淀粉氧化淀粉中羥基團含量的測定 |
Modified starch - Determination of carboxyl group content of oxidized starch (ISO 11214:1996) |
| EN ISO 11215-1998 |
改良淀粉乙酰二淀粉和已二酸酯中已二酸含量的測定氣相色譜法 |
Modified starch - Determination of adipic acid content of acetylated di-starch adipates - Gas-chromatographic method (ISO 11215:1998) |
| EN ISO 11216-1998 |
改良淀粉羧甲基淀粉中羧甲基團含量的測定 |
Modified starch - Determination of content of carboxymethyl groups in carboxymethyl starch (ISO 11216:1998) |
| EN ISO 11244-1999 |
牙科釬焊包埋料 |
Dental brazing investments (ISO 11244:1998) |
| EN ISO 11245-2000 |
牙齒修復磷酸鹽結合劑耐火模鑄材料 |
Dental restorations - Phosphate-bonded refractory die materials (ISO 11245:1999) |
| EN ISO 11246-1998 |
牙科硅酸乙脂結合劑鑄造包埋材料 |
Dental ethyl silicate bonded casting investments (ISO 11246:1996) |
| EN ISO 11248-1999 |
塑料熱固性模塑料溫升時短暫性能的評價 |
Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures(ISO 11248:1993) |
| EN ISO 11254-1-2000 |
激光和激光設備光學表面激光導致?lián)p傷閾值的測定第1部分：1-on-1試驗 |
Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test (ISO 11254-1:2000) |
| EN ISO 11254-2-2001 |
激光和激光設備光學表面激光導致?lián)p傷閾值的測定第2部分：S on 1試驗 |
Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S on 1 test (ISO 11254-2:2001) |
| EN ISO 1127-1996 |
不銹鋼管尺寸、公差和單位長度的公稱質量 |
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length |
| EN ISO 11290-1-1996 |
食品和動物飼料的微生物學單核細胞增生性利斯特氏菌檢測和計數的水平方法第1部分：檢測方法 |
Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Listeria monocytogenes - Part 1: Detection method (ISO 11290-1:1996) |
| EN ISO 11290-1-2004 |
食品和動物飼料的微生物學.單核細胞增生性利斯特氏菌檢測和計數的水平方法.第1部分:檢測方法 |
|
| EN ISO 11290-1/prA1-2002 |
食品和動物飼料的微生物學單核細胞增生性利斯特氏菌檢測和計數的水平方法第1部分：檢測方法修改1：改 |
Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Listeria monocytogenes - Part 1: Detection method; Amendment 1: Modification of the isolation media, of the haemolysis test and inclusion of precision |
| EN ISO 11290-2-1998 |
食品和動物飼料的微生物學單核細胞增生性利斯特氏菌檢測和計數的水平方法第2部分：計數方法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 2: Enumeration method (ISO 11290-2:1998) |
| EN ISO 11290-2-2004 |
食品和動物飼料的微生物學.單核細胞增生性利斯特氏菌檢測和計數的水平方法.第2部分:計數方法 |
|
| EN ISO 11290-2/prA1-2002 |
食品和動物飼料的微生物學單核細胞增生性利斯特氏菌檢測和計數的水平方法第2部分：計數方法修改1：改 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 2: Enumeration method; Amendment 1: Modification of the isolation medium (ISO 11290-2:1998/DAM 1:2002) |
| EN ISO 11306-1998 |
金屬與合金的腐蝕對海水表面的金屬和合金的暴露和評估準則 |
Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water (ISO 11306:1998) |
| EN ISO 1133-1999 |
塑料 熱塑性塑料熔體質量流動速率(MFR)和熔體體積流動速率(MFR)的測定 |
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:1997) |
| EN ISO 11334-1-1997 |
用胳膊操作的助步器要求和試驗方法第1部分：肘支撐器 |
Walking aids manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches (ISO 11334-1:1994) |
| EN ISO 11334-4-1999 |
用胳膊操作的助步器要求和試驗方法第4部分：具有三條或多于三條腿支撐的步行器扶杖 |
Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs (ISO 11334-4:1999) |
| EN ISO 11337-2004 |
塑料.聚酰胺.氣相色譜法測定ε-己內酰胺和ω-月桂酰 |
|
| EN ISO 11341-1997 |
色漆和清漆人工老化和人工輻射照射氙弧燈照射 |
Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (ISO 11341:1994) |
| EN ISO 11341-2004 |
色漆和清漆.模擬氣候及模擬輻射曝曬.氙弧燈曝曬 |
|
| EN ISO 11348-1-1998 |
水質水樣對弧菌類光發射抑制影響的測定(發光細菌試驗)第1部分：使用新制備細菌法 |
Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria (ISO 11348-1:1998) |
| EN ISO 11348-2-1998 |
水質水樣對弧菌類光發射抑制影響的測定(發光細菌試驗)第2部分：使用干細菌法 |
Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria (ISO 11348-2:1998) |
| EN ISO 11348-3-1998 |
水質水樣對弧菌類光發射抑制影響的測定(發光細菌試驗)第3部分：使用凍干細菌法 |
Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria (ISO 11348-3:1998) |
| EN ISO 11357-1-1997 |
塑料差示掃描量熱法(DSC)第1部分：一般原則 |
Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:1997) |
| EN ISO 11358-1997 |
塑料高聚物的熱重分析法(TG)一般原則 |
Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997) |
| EN ISO 11369-1997 |
水質選擇性植物處理劑的測定固液萃取紫外檢測高效液相色譜法 |
Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997) |
| EN ISO 11376-2001 |
塑料環氧樹脂和縮水甘油基酯無機氯的測定 |
Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine (ISO 11376:1997) |
| EN ISO 11378-2-2001 |
紡織地板覆蓋物實驗室弄臟試驗第2部分：轉鼓試驗 |
Textile floor coverings - Laboratory soiling tests - Part 2: Drum test (ISO 11378-2:2001) |
| EN ISO 11380-1996 |
光學和光學儀器眼科光學成形器 |
Optics and optical instruments - Ophthalmic optics - Formers (ISO 11380:1994) |
| EN ISO 11381-1996 |
光學和光學儀器眼科光學螺紋 |
Optics and optical instruments - Ophthalmic optics - Screw threads (ISO 11381:1994) |
| EN ISO 11399-2000 |
熱環境人類工效學相關國際標準的原則與應用 |
Ergonomics of the thermal environment - Principles and application of relevant International Standards (ISO 11399:1995) |
| EN ISO 11401-1998 |
塑料酚醛樹脂用液相色譜法分離 |
Plastics - Phenolic resins - Separation by liquid chromatography (ISO 11401:1993) |
| EN ISO 11402-1998 |
塑料綜合樹脂游離甲醛的測定 |
Plastics - Condensation resins - Determination of free formaldehyde (ISO 11402:1993) |
| EN ISO 11403-1-2003 |
塑料可比多點數據的采集和表示第1部分：機械性能 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2001) |
| EN ISO 11403-2-1999 |
塑料可比多點數據的采集和表示第2部分：熱和加工性能 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:1995) |
| EN ISO 11403-2-2004 |
塑料.可比多點數據的采集和表示.第2部分:熱性能和加工性能 |
|
| EN ISO 11403-3-2001 |
塑料可比多點數據的采集和表示第3部分：環境對性能的影響 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:1999) |
| EN ISO 11409-1998 |
塑料酚醛樹脂用差示掃描量熱法測定反應熱及溫度 |
Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993) |
| EN ISO 11426-1998 |
金合金首飾中含金量的測定灰吹法(火試金法) |
Determination of gold in gold jewellery alloys - Cupellation method (fire assay) (ISO 11426:1997) |
| EN ISO 11431-2002 |
房屋建筑密封膠受熱、接觸水和透過玻璃暴露于人造光后密封膠的粘合性的測定 |
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO 11431:2002) |
| EN ISO 11432-1997 |
房屋建筑密封膠耐壓性的測定 |
Building construction - Sealants - Determination of resistance to compression (ISO 11432:1993) |
| EN ISO 11439-2000 |
氣瓶車上貯存機動車用天然氣燃料用高壓氣瓶 |
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2000) |
| EN ISO 11442-1-1996 |
技術產品文件計算機技術信息處理第1部分：安全要求 |
Technical product documentation - Handling of computer-based technical information - Part 1: Security requirements (ISO 11442-1:1993) |
| EN ISO 11442-2-1996 |
技術產品文件計算機技術信息處理第2部分：原始文獻 |
Technical product documentation - Handling of computer-based technical information - Part 2: Original documentation (ISO 11442-2:1993) |
| EN ISO 11442-3-1996 |
技術產品文件計算機技術信息處理第3部分：產品設計過程的階段 |
Technical product documentation - Handling of computer-based technical information - Part 3: Phases in the product design process (ISO 11442-3:1993) |
| EN ISO 11442-4-1996 |
技術產品文件計算機技術信息處理第4部分：文獻管理和檢索系統 |
Technical product documentation - Handling of computer-based technical information - Part 4: Document management and retrieval systems (ISO 11442-4:1993) |
| EN ISO 11446-2002 |
乘用車和具有12伏電壓系統的輕型商用車牽引車和掛車之間的13極連接器的尺寸和接頭的分布 |
Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation (ISO 11446:1995 and Amd. 1:1997) / Note: To be replaced by prEN ISO 11446 (2003-10). |
| EN ISO 11468-1999 |
塑料試驗用聚氯乙烯糊料的制備溶解方法 |
Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997) |
| EN ISO 11469-2000 |
塑料塑料產品的一般鑒定和標志 |
Plastics - Generic identification and marking of plastics products (ISO 11469:2000) |
| EN ISO 11489-1995 |
鉑合金首飾中含鉑量的測定氯化汞還原重量法 |
Determination of platinum in platinum jewellery alloys - Gravimetric determination by reduction with mercury(I) chloride (ISO 11489:1995) |
| EN ISO 11490-1995 |
鈀合金首飾中含鈀量的測定丁二酮肟重量法 |
Determination of palladium in palladium jewellery alloys - Gravimetric determination with dimethylglyoxime (ISO 11490:1995) |
| EN ISO 11498-1999 |
牙科手機牙科用低壓電動機 |
Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997) |
| EN ISO 11499-1999 |
局部麻醉用注射針管 |
Dental cartridges for local anaesthetics (ISO 11499:1997) |
| EN ISO 11501-2004 |
塑料.薄膜和薄板.加熱尺寸變化的測定 |
|
| EN ISO 11507-2001 |
色漆和清漆涂層在設備中人工老化UV熒光和水的老化 |
Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV and water (ISO 11507:1997) |
| EN ISO 11539-1999 |
眼科光學隱形眼鏡隱形眼鏡和隱形眼鏡材料的分類 |
Ophthalmic optics - Contact lenses - Classification of contact lenses and contact lens materials (ISO 11539:1999) |
| EN ISO 11541-2002 |
天然氣高壓下含水量的測定/注：認可通知 |
Natural gas - Determination of water content at high pressure (ISO 11541:1997) |
| EN ISO 11542-1-2001 |
塑料超高分子量聚乙烯(PE-UHMW)模塑和擠塑材料第1部分：命名系統和基本規范 |
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001) |
| EN ISO 11542-2-1998 |
塑料超高分子量聚乙烯(PE-UHMW)模塑和擠塑材料第2部分：試樣的制備和性能的測定 |
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998) |
| EN ISO 11543-2002 |
改良淀粉羥丙基含量的測定質子核磁共振光譜測定法(NMR) |
Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry (ISO 11543:2000) |
| EN ISO 11545-2001 |
農業排灌設備有噴嘴和噴霧嘴的橫向移動排灌機械和中心軸分配水的均勻性的測定 |
Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution (ISO 11545:2001) |
| EN ISO 11546-1-1995 |
聲學隔聲罩隔聲性能的測定第1部分：實驗室測量(作說明用) |
Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
| EN ISO 11546-2-1995 |
聲學隔聲罩隔聲性能的測定第2部分：現場測量(驗收和鑒定用) |
Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
| EN ISO 11551-1997 |
光學和光學儀器激光和激光設備光學激光組件光吸收性試驗方法 |
Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:1997) |
| EN ISO 11554-2003 |
光學和光學儀器激光和激光設備激光束功率、能量和時間特征的試驗方法 |
Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2003) |
| EN ISO 11562-1997 |
產品幾何量技術規范(GPS)表面特征：輪廓法相位校正過濾器的計量特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters (ISO 11562:1996) |
| EN ISO 1157-1999 |
塑料稀溶液中的乙酸纖維粘度值和粘度率的測定 |
Plastics - Cellulose acetate in dilute solution - Determination of viscosity number and viscosity ratio (ISO 1157:1990) |
| EN ISO 1158-1998 |
塑料 氯乙烯均聚物和共聚物 氯含量的測定 |
Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998) |
| EN ISO 11591-2000 |
發動機驅動小艇操舵部位的視野 |
Small craft, engine-driven - Field of vision from helm position (ISO 11591:2000) |
| EN ISO 11592-2001 |
外殼小于8m長的小艇最大推力的測定 |
Small craft less than 8 m length of hull - Determination of maximum propulsion power rating (ISO 11592:2001) |
| EN ISO 11593-1997 |
操作型工業機器人末端執行器自動更換系統詞匯和特性表示 |
Manipulating industrial robots - Automatic end effector exchange systems - Vocabulary and presentation of characteristics (ISO 11593:1996) |
| EN ISO 11606-2001 |
船舶與海上技術船用電磁羅經 |
Ships and marine technology - Marine electromagnetic compasses (ISO 11606:2000) |
| EN ISO 11608-1-2000 |
醫用筆試注射器第1部分：筆式注射器要求和試驗方法 |
Pen-injectors for medical use - Part 1: Pen-injectors; Requirements and test methods (ISO 11608-1:2000) |
| EN ISO 11608-2-2000 |
醫用筆試注射器第2部分：針頭要求和試驗方法 |
Pen-injectors for medical use - Part 2: Needles; Requirements and test methods (ISO 11608-2:2000) |
| EN ISO 11608-3-2000 |
醫用筆試注射器第3部分：注射器盒要求和試驗方法 |
Pen-injectors for medical use - Part 3: Finished cartridges; Requirements and test methods (ISO 11608-3:2000) |
| EN ISO 11609-1998 |
牙科學牙膏要求、試驗方法和標志 |
Dentistry - Toothpastes - Requirements, test methods and marking (ISO 11609:1995) |
| EN ISO 11623-2002 |
可運輸氣瓶復合氣瓶的周期性檢測和試驗 |
Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders (ISO 11623:2002) |
| EN ISO 1163-1-1999 |
塑料 未增塑聚氯乙烯 (PUC－U)模塑和擠塑材料 第1部分：命名系統和基本規范 |
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995) |
| EN ISO 1163-2-1999 |
塑料 未增塑聚氯乙烯均聚物和共聚物的化合物 第2部分：試樣的制備和性能的測定 |
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995) |
| EN ISO 11640-1998 |
皮革色牢度試驗?zāi)椭芷谛酝鶑?fù)摩擦的色牢度 |
Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:1993) |
| EN ISO 11641-2003 |
皮革 色牢度試驗 耐汗?jié)n色牢度 |
Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:1993) |
| EN ISO 11642-1998 |
皮革色牢度試驗?zāi)退吹纳味?/td>
| Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:1993) |
| EN ISO 11643-1998 |
皮革色牢度試驗小樣品耐干洗溶液的色牢度 |
Leather - Tests for colour fastness - Colour fastness of small samples to dry-cleaning solutions (ISO 11643:1993) |
| EN ISO 11644-2003 |
皮革 涂層粘牢度試驗 |
Leather - Test for adhesion of finish (ISO 11644:1993) |
| EN ISO 11646-1998 |
皮革面積的測量 |
Leather - Measurement of area (ISO 11646:1993) |
| EN ISO 11654-1997 |
聲學建筑用吸聲裝置吸聲定標 |
Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
| EN ISO 11667-1999 |
纖維增強塑料模塑料和預浸料樹脂、增強纖維和礦物質填料含量的測定溶解法 |
Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997) |
| EN ISO 11668-2001 |
色漆和清漆用粘合劑氯化聚合物樹脂通用試驗方法 |
Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test (ISO 11668:1997) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com