標準號 |
中文名稱 |
英文名稱 |
| ISO 11678-1996 |
農業排灌機械.鋁制灌溉管 |
(Agricultural irrigation equipment - Aluminium irrigation tubes) |
| ISO 11680-1-2000 |
林業機械.動力桿式修枝鋸的安全要求和試驗.第1部分:側掛式桿式修枝鋸 |
(Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine) |
| ISO 11680-2-2000 |
林業機械.動力桿式修枝鋸的安全要求和試驗.第2部分:攜背負式桿式修枝鋸 |
(Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source) |
| ISO 11681-1-1996 |
林業機械.便協式鏈鋸的安全要求和試驗.第1部分:普通森林管理用鏈鋸 |
(Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 1: Chain-saws for normal forest work) |
| ISO 11681-1-2004 |
林業機械.便攜式鏈鋸的安全要求和試驗.第1部分:林業專用鏈鋸 |
|
| ISO 11681-2 AMD 1-2003 |
林業機械.便攜式鏈鋸.安全要求和試驗.第2部分:修枝鋸.修改件1 |
(Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 2: Chain-saws for tree service; Amendment 1) |
| ISO 11681-2 AMD 1-2003 |
林業機械.便攜式鏈鋸.安全要求和試驗.第2部分:修枝鋸.修改件1 |
|
| ISO 11681-2-1998 |
林業機械.便攜式鏈鋸.安全要求和試驗.第2部分:樹木砍伐用鏈鋸 |
(Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 2: Chain-saws for tree service) |
| ISO 11683-1997 |
包裝.觸摸危險標志的要求 |
(Packaging - Tactile warnings of danger - Requirements) |
| ISO 11684-1995 |
農業和林業,電力剪草和園藝機具用拖拉機及其它機械的安全標志和危險圖示一般原理 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Safety signs and hazard pictorials - General principles) |
| ISO 11687-1-1995 |
滑動軸承.軸承座滑動軸承.第1部分:支撐式軸承 |
(Plain bearings - Pedestal plain bearings - Part 1: Pillow blocks) |
| ISO 11687-2-1995 |
滑動軸承.軸承座滑動軸承.第2部分:邊法蘭軸承 |
(Plain bearings - Pedestal plain bearings - Part 2: Side flange bearings) |
| ISO 11687-3-1995 |
滑動軸承.軸承座滑動軸承.第3部分:中心法蘭軸承 |
(Plain bearings - Pedestal plain bearings - Part 3: Centre flange bearings) |
| ISO 11689-1996 |
聲學.機械設備釋放燥聲數據的比較方法 |
(Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment) |
| ISO 1169-1975 |
鋅合金.鋁含量的測定容量法 |
(Zinc alloys; Determination of aluminium content; Volumetric method) |
| ISO 11690-1-1996 |
聲學.低噪聲工作室容納機械裝置的設計用推薦實用規程.第1部分:噪聲控制戰略 |
(Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies) |
| ISO 11690-2-1996 |
聲學.低噪聲工作室容納機械裝置的設計用推薦實用規程.第2部分:噪聲控制測量 |
(Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures) |
| ISO 11691-1995 |
聲學.無流體管道式消聲器的介入損耗測量.實驗室調查法 |
(Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method) |
| ISO 11692-1994 |
從工作高溫沉淀硬化用鐵素珠層工程鋼 |
(Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures) |
| ISO 11697-1995 |
結構設計的基礎.散裝物料的荷載 |
(Basis for design of structures - Loads due to bulk materials) |
| ISO 11698-1-2000 |
縮微照相.用方孔咯掃描儀作出圖像質量的測量方法.第1部分:試驗圖像的特性 |
(Micrographics - Methods of measuring image quality produced by aperture card scanners - Part 1: Characteristics of the test images) |
| ISO 11698-2-2000 |
縮微照相.用方孔咯掃描儀作出圖像質量的測量方法.第2部分:質量標準和控制 |
(Micrographics - Methods of measuring image quality produced by aperture card scanners - Part 2: Quality criteria and control) |
| ISO 11699-1-1998 |
無損檢驗.工業射線攝影膠片.第1部分:工業輻射攝影術用膠片系統的特性 |
(Non-destructive testing - Industrial radiographic films - Part 1: Classification of film systems for industrial radiography) |
| ISO 11699-2-1998 |
無損檢驗.工業射線攝影膠片.第2部分:利用參考值控制膠片加工 |
(Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values) |
| ISO 1170-1977 |
煤和焦炭.不同基的分析計算 |
(Coal and coke; Calculation of analyses to different bases) |
| ISO 1171 Technical Corrigendum 1-1998 |
固體燃料檢驗.灰分含量測定.技術勘誤1 |
(Solid mineral fuels - Determination of ash content; Technical Corrigendum 1) |
| ISO 1171-1997 |
固體礦物燃料.灰分含量的測定 |
(Solid mineral fuels - Determination of ash content) |
| ISO 11713-2000 |
用于鋁生產的碳質材料.陰極塊和陽極塊.室溫下電阻的測定 |
(Carbonaceous materials used in the production of aluminium - Cathode blocks and baked anodes - Determination of electrical resistivity at ambient temperature) |
| ISO 1172-1996 |
紡織玻璃纖維增強塑料、預浸料坯、壓制混合物及疊層板材.紡織玻璃纖維和礦物填充料含量的測定.煅燒法 |
(Textile-glass-reinforced plastics, prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods) |
| ISO 11721-1-2001 |
紡織品.含纖維素紡織品抗微生物的測定.土埋試驗.第1部分:抗腐爛程度的評價 |
(Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms; Soil burial test - Part 1: Assessment of rot-retardant finishing) |
| ISO 11721-2-2003 |
紡織品.纖維素紡織品抗菌性的測定.土埋試驗.第2部分:防腐處理長期有效性的鑒定 |
(Textiles - Determination of the resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish) |
| ISO 11721-2-2003 |
紡織品.纖維素紡織品抗菌性的測定.土埋試驗.第2部分:防腐處理長期有效性的鑒定 |
|
| ISO 11722-1999 |
固體礦物燃料.硬煤.通過氮中干燥對一般分析試驗樣品潮濕度的測定 |
(Solid mineral fuels - Hard coal - Determination of moisture in the general analysis test sample by drying in nitrogen) |
| ISO 11723-2004 |
固體礦物燃料.砷和硒的測定.艾氏卡混合物和氫化法 |
|
| ISO 11726-2004 |
固體礦物燃料.替代分析法的驗證指南 |
|
| ISO 11726-2004 |
固體礦物燃料.替代分析法的驗證指南 |
|
| ISO 11727-1999 |
氣流動力.控制閥和其它件的控制機械裝置和氣門的識別 |
(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components) |
| ISO 1173-2001 |
螺釘和螺母用裝配工具.手動和機動旋具類的驅動端和連接部件.尺寸和扭矩試驗 |
(Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing) |
| ISO 11731-1998 |
水質.Legionella的檢測和計數 |
(Water quality - Detection and enumeration of Legionella) |
| ISO 11731-2-2004 |
水質.軍團藻屬的檢測和計數.第2部分:對含低量細菌的水進行直接膜過濾的方法 |
|
| ISO 11732-1997 |
水質.用水流分析和光譜檢測法測定氨氮 |
(Water quality - Determination of ammonium nitrogen by flow analysis (CFA and FIA) and spectrometric detection) |
| ISO 11733-1995 |
水的質量.在水介質中有機化合物的生物分解和消失的評定.凈化沉積物的模擬試驗 |
(Water quality - Evaluation of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test) |
| ISO 11733-2004 |
水質.水介質中有機化合物的生物降解和去除率的測定.活性污泥模擬試驗 |
|
| ISO 11733-2004 |
水質.水介質中有機化合物的生物降解和去除率的測定.活性污泥模擬試驗 |
|
| ISO 11734-1995 |
水質.消化污泥中有機化合物的`最終`厭氧生物降解能力評定.生物氣體制品的測量方法 |
(Water quality - Evaluation of the “ultimate“ anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production) |
| ISO 11737-1-1995 |
醫療器械的消毒.微生物法.產品的微生物群數的判斷 |
(Sterilization of medical devices - Microbiological methods - Part 1: Estimation of population of microorganisms on products) |
| ISO 11737-2-1998 |
醫療器械的消毒.微生物法.第2部分:滅菌證實過程的無菌檢驗 |
(Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the validation of a sterilization process) |
| ISO 11737-3-2004 |
醫療器械滅菌.微生物學方法.第3部分:生物負荷數據的評估和解釋指南 |
|
| ISO 11738-2000 |
農用灌溉設備.控制裝置 |
(Agricultural irrigation equipment - Control heads) |
| ISO 1174-1-1996 |
螺釘和螺母用裝配工具.驅動方頭.第1部分:手動套筒工具的驅動方頭 |
(Assembly tools for screws and nuts - Driving squares - Part 1: Driving squares for hand socket tools) |
| ISO 1174-2-1996 |
螺釘和螺母用裝配工具.驅動方頭.第2部分:機動套筒工具的驅動方頭 |
(Assembly tools for screws and nuts - Driving squares - Part 2: Driving squares for power socket tools) |
| ISO 11748-1-2001 |
道路車輛.電氣和電子系統的技術文件.第1部分:交換文獻的內容 |
(Road vehicles - Technical documentation of electrical and electronic systems - Part 1: Content of exchanged documents) |
| ISO 11748-2-2001 |
道路車輛.電氣和電子系統的技術文件.第2部分:文獻協議 |
(Road vehicles - Technical documentation of electrical and electronic systems - Part 2: Documentation agreement) |
| ISO 11748-3-2002 |
道路車輛.電氣和電子系統的技術文件.第3部分:應用實例 |
(Road vehicles - Technical documentation of electrical and electronic systems - Part 3: Application example) |
| ISO 11749 Technical Corrigendum 1-2003 |
皮帶傳送.自動化工業用三角皮帶.疲勞試驗.技術勘誤1 |
(Belt drive - V-ribbed belts for the automotive industry - Fatigue test; Technical Corrigendum 1) |
| ISO 11749 Technical Corrigendum 1-2003 |
皮帶傳送.自動化工業用三角皮帶.疲勞試驗.技術勘誤1 |
|
| ISO 11749-1995 |
皮帶驅動.用于汽車工業的V-羅紋皮帶.疲勞試驗 |
(Belt drive - V-ribbed belts for the automotive industry - Fatigue test) |
| ISO 11752-2000 |
柔性泡沫聚合材料.模塑和擠塑多孔或多孔橡膠制品.已完工部件的壓縮試驗 |
(Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts) |
| ISO 11754-2003 |
航空數據和信息發送系統.遙測通道編碼 |
(Space data and information transfer systems - Telemetry channel coding) |
| ISO 11754-2003 |
航空數據和信息發送系統.遙測通道編碼 |
|
| ISO 11755-1996 |
永久性的和可液化氣體用捆綁式儲氣瓶(乙炔除外).充氣時間的檢測 |
(Cylinders in bundles for permanent and liquefiable gases (excluding acetylene) - Inspection at time of filling) |
| ISO 11758 Technical Corrigendum 1-1998 |
橡膠與塑料軟管.在氙弧燈下顏色與外觀的穩定性試驗.技術勘誤1 |
(Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance; Technical Corrigendum 1) |
| ISO 11758-1995 |
橡膠和塑料軟管.暴露在氙弧燈下的試驗.顏色和外觀變化的測定 |
(Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance) |
| ISO 11759-1999 |
液化石油氣用橡膠軟管和軟管組件(LPGs).規范 |
(Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) - Specification) |
| ISO 1176-1990 |
道路車輛.重量.詞匯和代碼 |
(Road vehicles; masses; vocabulary and codes) |
| ISO 1177-1985 |
信息處理.定向傳輸?shù)钠鹬棺址屯阶址淖址Y構 |
(Information processing - Character structure for start/stop and synchronous character oriented transmission) |
| ISO 1178-1976 |
鎂合金.可溶性鋯的測定.茜素磺酸鹽光度法 |
(Magnesium alloys; Determination of soluble zirconium; Alizarin sulphonate photometric method) |
| ISO 11782-1-1998 |
金屬及合金的腐蝕.腐蝕疲勞試驗.第1部分:失效試驗周期 |
(Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing) |
| ISO 11782-2-1998 |
金屬及合金的腐蝕.腐蝕疲勞試驗.第2部分:使用裂縫前的裂紋擴展試驗 |
(Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens) |
| ISO 11783-2 Technical Corrigendum 1-2003 |
農林業用拖拉機及機械設備.系列控制和通信數據網.第2部分:物理層.技術勘誤1 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 2: Physical layer; Technical Corrigendum 1) |
| ISO 11783-2 Technical Corrigendum 1-2003 |
農林業用拖拉機及機械設備.系列控制和通信數據網.第2部分:物理層.技術勘誤1 |
|
| ISO 11783-2-2002 |
農業和林業用拖拉機及機械設備.系列控制和通信數據網.第2部分:物理層 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 2: Physical layer) |
| ISO 11783-3-1998 |
農業和林業用拖拉機及機械.系列控制和通信數據網.第3部分:數據鏈路層 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 3: Data link layer) |
| ISO 11783-4-2001 |
農業和林業用拖拉機及機械.系列控制和通信數據網.第4部分:網絡層 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 4: Network layer) |
| ISO 11783-5 Technical Corrigendum 1-2002 |
農林業用拖拉機及機械設備.系列控制和通信數據網.第5部分:網絡管理.技術勘誤1 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 5: Network management; Technical Corrigendum 1) |
| ISO 11783-5-2001 |
農業和林業用拖拉機及機械.系列控制和通信數據網.第5部分:網絡管理 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 5: Network management) |
| ISO 11783-6-2004 |
農林業用拖拉機及機械設備.串行控制和通信數據網.第6部分:虛擬終端 |
|
| ISO 11783-7 Technical Corrigendum 1-2004 |
農林用拖拉機和機械.系列控制和通信數據網.第7部分:實施信息應用層.技術勘誤1 |
|
| ISO 11783-7-2002 |
農林用拖拉機和機械.系列控制和通信數據網.第7部分:實施信息應用層 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 7: Implement messages application layer) |
| ISO 11783-9-2002 |
農林用拖拉機及機械.系列控制和通信數據網.第9部分:ECU 拖拉機 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 9: Tractor ECU) |
| ISO 11784 AMD 1-2004 |
動物的射頻信號識別.代碼結構.修改件1 |
|
| ISO 11785-1996 |
動物對無線電頻率識別的技術概念 |
(Radio frequency identification of animals - Technical concept) |
| ISO 11786-1995 |
農用拖拉機和農業機械.拖拉機上裝的測頭界面規范 |
(Agricultural tractors and machinery - Tractor-mounted sensor interface - Specifications) |
| ISO 11787-1995 |
農業和林業機械.管理計算機和過程控制計算機之間的數據交換 |
(Machinery for agriculture and forestry - Data interchange between management computer and process computers - Data interchange syntax) |
| ISO 11788-1-1997 |
農業信息系統間的電子數據交換.農業電子數據辭典.第1部分:一般描述 |
(Electronic data interchange between information systems in agriculture - Agricultural data element dictionary - Part 1: General description) |
| ISO 11788-2-2000 |
農業信息系統間的電子數據交換.農用數據辭典.第2部分:奶牛飼養業 |
(Electronic data interchange between information systems in agriculture - Agricultural data element dictionary - Part 2: Dairy farming) |
| ISO 11788-3-2000 |
農業信息系統間的電子數據交換.農業電子數據辭典.第3部分:豬飼養業 |
(Electronic data interchange between information systems in agriculture - Agricultural data element dictionary - Part 3: Pig farming) |
| ISO 11789-1999 |
剛性切割工具的機動邊緣.定義,安全要求和試驗過程 |
(Powered edgers with rigid cutting means - Definitions, safety requirements and test procedures) |
| ISO 1179-1981 |
符合ISO 228/1螺紋標準的工業用平口鋼管和其它金屬管接頭 |
(Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications) |
| ISO 11795-1997 |
農業拖拉機用驅動輪胎.測量輪胎滾動圓周的方法 |
(Agricultural tractor drive wheel tyres - Method of measuring tyre rolling circumference) |
| ISO 11798-1999 |
信息和文獻工作.紙上書寫、印刷和復制的永久性和持久性.要求和試驗方法 |
(Information and documentation - Permanence and durability of writing, printing and copying on paper - Requirements and test methods) |
| ISO 11799-2003 |
信息和文獻.歸檔和圖書館資料的文獻存儲要求 |
(Information and documentation - Document storage requirements for archive and library materials) |
| ISO 11799-2003 |
信息和文獻.歸檔和圖書館資料的文獻存儲要求 |
|
| ISO 1180 ADD 1-1985 |
第1次補充 |
(Shanks for pneumatic tools and fitting dimensions of chuck bushings; addendum 1) |
| ISO 1180-1983 |
風動工具的手柄和夾緊軸套的安裝尺寸 |
(Shanks for pneumatic tools and fitting dimensions of chuck bushings) |
| ISO 11800-1998 |
信息和文獻工作.圖書生產中使用的裝訂方法和裝訂材料的要求 |
(Information and documentation - Requirements for binding materials and methods used in the manufacture of books) |
| ISO 11806-1997 |
農林機械.內燃機驅動的輕型手持灌木鏟除機和草地割草機.安全 |
(Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety) |
| ISO 11807-1-2001 |
集成光學.詞匯.第1部分:基本術語和符號 |
(Integrated optics - Vocabulary - Part 1: Basic terms and symbols) |
| ISO 11807-2-2001 |
集成光學.詞匯.第2部分:用于分類的術語 |
(Integrated optics - Vocabulary - Part 2: Terms used in classification) |
| ISO 1181-1990 |
馬尼拉麻和波羅麻繩索.規范 |
(Ropes; manila and sisal; specification) |
| ISO 1181-2004 |
纖維繩索.馬尼拉麻和西沙爾麻繩索.3、4和8股繩 |
|
| ISO 1181-2004 |
纖維繩索.馬尼拉麻和西沙爾麻繩索.3、4和8股繩 |
|
| ISO 11810-2002 |
光學和光學儀器.激光和激光有關設備.手術布單和/或病人防護覆蓋層耐激光的試驗方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test method for the laser-resistance of surgical drapes and/or patient-protective covers) |
| ISO 11812-2001 |
小艇.防滲水座艙和快速排干座艙 |
(Small craft - Watertight cockpits and quick-draining cockpits) |
| ISO 11813-1998 |
牛奶和牛奶制品.鋅含量的測定.火焰原子吸收光譜法 |
(Milk and milk products - Determination of zinc content - Flame atomic absorption spectrometric method) |
| ISO 11814-2002 |
奶粉.熱處理度的評定.高效液相色譜法 |
(Dried milk - Assessment of heat treatment intensity - Method using high-performance liquid chromatography) |
| ISO 11816-1-1997 |
牛奶和奶制品.熒光計法測定堿性磷酸酶的活性.第1部分:牛奶和牛奶飲料 |
(Milk and milk products - Determination of alkaline phosphatase activity using a fluorimetric method - Part 1: Milk and milk-based drinks) |
| ISO 11816-2-2003 |
牛奶和奶制品.堿性磷酸酶的活性測定.第2部分:乳酪的熒光計法 |
(Milk and milk products - Determination of alkaline phosphatase activity - Part 2: Fluorometric method of cheese) |
| ISO 11816-2-2003 |
牛奶和奶制品.堿性磷酸酶的活性測定.第2部分:乳酪的熒光計法 |
|
| ISO 11817-1994 |
烘烤后的磨碎的咖啡.水分含量的測定.Karl Fischer方法 |
(Roasted ground coffee - Determination of moisture content - Karl Fischer method (Reference method)) |
| ISO 11819-1-1997 |
聲學.路面對交通噪聲的影響測量.第1部分:旁路統計法 |
(Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical pass-by method) |
| ISO 1182-2002 |
建筑材料的對火反應試驗.不可燃性試驗 |
(Reaction to fire tests for building products - Non-combustibility test) |
| ISO 11820-1996 |
聲學.現場用消聲器的測量 |
(Acoustics - Measurements on silencers in situ) |
| ISO 11821-1997 |
聲學.可移遮板現場聲音降低的測量 |
(Acoustics - Measurement of the in situ sound attenuation of a removable screen) |
| ISO 11822-1996 |
信息和文獻工作.目錄信息交換用阿拉伯字母代碼字符集的擴展 |
(Information and documentation - Extension of the Arabic alphabet coded character set for bibliographic information interchange) |
| ISO 11825-1995 |
紡織機械及其配件.針織機用舌型針.針桿寬度和提花機豎鉤高度的調理 |
(Textile machinery and accessories - Latch-type needles for knitting machines - Coordination of shank widths and hook heights) |
| ISO 1183-1-2004 |
塑料.非泡沫塑料的密度測定方法.第1部分:浸漬法、液體比重瓶法和滴定法 |
|
| ISO 1183-2-2004 |
塑料.非泡沫塑料的密度測定方法.第2部分:密度梯度管法 |
|
| ISO 1183-2-2004 |
塑料.非泡沫塑料的密度測定方法.第2部分:密度梯度管法 |
|
| ISO 1183-2-2004 |
塑料.非泡沫塑料的密度測定方法.第2部分:密度梯度管法 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com