標準號 |
中文名稱 |
英文名稱 |
| ISO 4117-1993 |
空運和空運/地面運輸用貨盤.規范和試驗 |
(Air and air/land cargo pallets; specification and testing) |
| ISO 4118 Technical Corrigendum 1-1999 |
空中運輸用的未經認可的底艙集裝箱.規范和試驗.勘誤1 |
(Non-certified lower-deck containers for air transport - Specification and testing; Technical Corrigendum 1) |
| ISO 4118-1996 |
空中運輸用的未經認可的底艙集裝箱.規范和試驗 |
(Non-certified lower-deck containers for air transport - Specification and testing) |
| ISO 4119-1995 |
紙漿.漿料濃度的測定 |
(Pulps - Determination of stock concentration) |
| ISO 4120-1983 |
感官分析.方法學.三角試驗 |
(Sensory analysis; Methodology; Triangular test) |
| ISO 4120-2004 |
感官分析.方法學.三角試驗 |
|
| ISO 4121-1987 |
感官分析.方法學.用秤法評價食品 |
(Sensory analysis; Methodology; Evaluation of food products by methods using scales) |
| ISO 4121-2003 |
感官分析.定量反應尺度的使用指南 |
|
| ISO 4123-1979 |
皮帶輸送機.承載托輥緩沖環和托輥的反向輪盤.主要尺寸 |
Belt conveyors; Impact rings for carrying idlers and discs for return idlers; Main dimensions |
| ISO 4124-1994 |
液態烴類.動測量.容量計系統的統計控制 |
(Liquid hydrocarbons - Dynamic measurement - Statistical control of volumetric metering systems) |
| ISO 4125-1991 |
干果和果干.定義和術語 |
(Dry fruits and dried fruits; definitions and nomenclature) |
| ISO 4126-1-1991 |
安全閥.第1部分:通用要求 |
(Safety valves; part 1: general requirements) |
| ISO 4126-1-2004 |
過壓保護安全設備.第1部分:安全閥 |
|
| ISO 4126-2-2003 |
過壓保護安全設備.第2部分:防爆板安全設備 |
(Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices) |
| ISO 4126-2-2003 |
過壓保護安全設備.第2部分:防爆板安全設備 |
|
| ISO 4126-4-2004 |
過壓保護安全設備.第4部分:液壓控制安全閥 |
|
| ISO 4126-5-2004 |
過壓保護安全設備.第5部分:可控安全減壓系統(CSPRS) |
|
| ISO 4126-6-2003 |
過壓保護安全設備.第6部分:防爆板安全設備的應用、選擇和安裝 |
|
| ISO 4126-7-2004 |
過壓保護安全設備.第7部分:通用數據 |
|
| ISO 4127-1-1979 |
造船.內河航行.導纜器.第1部分:雙吊線夾板導纜器 |
(Shipbuilding; Inland navigation; Fairleads; Part 1 : Two-lip fairleads) |
| ISO 4127-2-1980 |
造船.內河船舶.導纜器.第2部分:滾筒式導纜器 |
(Shipbuilding; Inland vessels; Fairleads; Part 2 : Roller fairleads) |
| ISO 4128-1985 |
飛機.按空運標準型式制造的集裝箱 |
(Aircraft; Air mode modular containers) |
| ISO 4129-1990 |
機動腳踏兩用車.控制裝置、指示器和信號裝置的符號 |
(Mopeds; symbols for controls, indicators and tell-tales) |
| ISO 413-1974 |
飛機.潤滑油加油管嘴的頭 |
(Aircraft; Heads of lubricating nipples) |
| ISO 4130-1978 |
道路車輛.三維基準系統和基準符號.定義 |
(Road vehicles; Three-dimensional reference system and fiducial marks; Definitions) |
| ISO 4131-1979 |
道路車輛.轎車的尺寸代碼 |
(Road vehicles; Dimensional codes for passenger cars) |
| ISO 4132-1979 |
壓力管用未增塑聚氯乙烯(PVC)和金屬的接頭配件裝接長度和螺紋尺寸.米制系列 |
(Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure; Laying lengths and size of threads; Metric series) |
| ISO 4133-1979 |
肉和肉制品.葡萄酸-δ-內酯含量的測定(參考法) |
(Meat and meat products; Determination of glucono-delta-lactone content (Reference method)) |
| ISO 4134-1999 |
肉和肉制品.L-(+)-谷氨酸含量的測定.參比法 |
(Meat and meat products - Determination of L-(+)-glutamic acid content - Reference method) |
| ISO 4135-2001 |
麻醉和呼吸設備.詞匯 |
(Anaesthetic and respiratory equipment - Vocabulary) |
| ISO 4136-2001 |
金屬材料焊接的破壞試驗.橫向抗拉試驗 |
(Destructive tests of welds in metallic materials - Traverse tensile test) |
| ISO 4138-1996 |
客車.穩態環行驅動.開式環行試驗程序 |
(Passenger cars - Steady-state circular driving behaviour - Open-loop test procedure) |
| ISO 4138-2004 |
乘用車.穩態環行駕駛.開環試驗程序 |
|
| ISO 4139-1979 |
硅鐵合金.鋁含量的測定.火焰原子吸收光譜測定法 |
(Ferrosilicon; determination of aluminium content; Flame atomic absorption spectrometric method) |
| ISO 4140-1979 |
鉻鐵和硅鉻鐵.鉻含量的測定.電位滴定法 |
(Ferrochromium and ferrosilicochromium; Determination of chromium content; Potentiometric method) |
| ISO 4141-1-1998 |
道路車輛.多芯連接電纜.第1部分:基本性能護套電纜的要求和試驗方法 |
(Road vehicles - Multicore connecting cables - Part 1: Test methods and requirements for basic performance sheathed cables) |
| ISO 4141-2-1998 |
道路車輛.多芯連接電纜.第2部分:基本性能護套電纜的要求和試驗方法 |
(Road vehicles - Multicore connecting cables - Part 2: Test methods and requirements for high performance sheathed cables) |
| ISO 4141-3 Technical Corrigendum 1-1999 |
道路 車輛.多芯連接電纜.第3部分:非屏蔽的護套低壓電纜的結構、尺寸和標記.技術勘誤1 |
Road vehicles - Multicore connecting cables - Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables; Technical Corrigendum 1 |
| ISO 4141-3-1998 |
道路車輛.多芯連接電纜. 第3部分:非屏蔽的護套低壓電纜的制造、尺寸和標記 |
Road vehicles - Multicore connecting cables - Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables |
| ISO 4141-4-2001 |
道路車輛.多芯連接電纜.第4部分:裝芯電纜組件聯接試驗方法和要求 |
Road vehicles - Multi-core connecting cables - Part 4: Articulation test methods and requirements for coiled cable assemblies |
| ISO 4142-2002 |
實驗室玻璃器皿.試管 |
Laboratory glassware - Test tubes |
| ISO 4143-1981 |
造船.內河船舶.敞蓬式劃槳救生艇 |
Shipbuilding; Inland vessels; Open rowing lifeboats |
| ISO 4144-2003 |
管道系統.符合ISO 7/1螺紋標準的不銹鋼配件 |
(Pipework - Stainless steel fittings threaded in accordance with ISO 7-1 ) |
| ISO 4144-2003 |
管道系統.符合ISO 7/1螺紋標準的不銹鋼配件 |
|
| ISO 4145-1986 |
符合ISO 7/1螺紋標準的非合金鋼配件 |
Non-alloy steel fittings threaded to ISO 7/1 |
| ISO 4147-1997 |
航空航天.六角開槽(槽頂),標定高度,標定交叉平面,帶MJ 螺紋的螺母.強度類別1100MPa,最高工作溫度 120℃;600MPa,最高工作溫度 235℃;900MPa,最高工作溫度 425℃;1100MPa,最高工作溫度 235℃;1100MPa,最高工作溫度 315℃;1100MPa,最高工作溫度 650℃;1210MPa,最高工作溫度 730℃ |
Aerospace - Nuts, hexagonal, slotted (castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 C,600 MPa (at ambient temperature)/235 C, 900 MPa (at ambient temperature)/425 C, 1100 MPa (at a |
| ISO 4148-1998 |
道路車輛.專用警告信號燈.尺寸 |
Road vehicles - Special warning lamps - Dimensions |
| ISO 4148-2004 |
道路車輛.專用警示信號燈.尺寸 |
|
| ISO 4149-1980 |
生咖啡.用嗅覺和視覺檢驗和測定雜質和缺陷 |
Green coffee; Olfactory and visual examination and determination of foreign matter and defects |
| ISO 415-1975 |
信封、明信片和類似制品.蓋郵戳區 |
Envelopes, postcards and similar articles; Cancellation area |
| ISO 4150-1991 |
生咖啡.粒度分析.人工篩分 |
(Green coffee; size analysis; manual sieving) |
| ISO 4151-1987 |
道路車輛.輕便摩托車.控制器的型號、定位和功能 |
(Road vehicles; Mopeds; Type, location and functions of controls) |
| ISO 4153-1981 |
飛機.壓力燃料的分配系統.關閉脈動壓力的試驗程序和極限值 |
(Aircraft; Pressure fuel dispensing system; Test procedure and limit value for shut-off surge pressure) |
| ISO 4156 AMD 1-1992 |
圓柱漸開線花鍵.米制模數.側面配合.概述.尺寸和檢驗.修改1,第3節:檢驗 |
(Straight cylindrical involute splines; metric module, side fit; generalities, dimensions and inspection; amendment 1; section 3: inspection) |
| ISO 4156-1981 |
圓柱漸開線花鍵.側面配合的米制模數.概述,尺寸和檢驗 |
(Straight cylindrical involute splines; Metric module, side fit; Generalities, dimensions and inspection) |
| ISO 4157-1-1998 |
建筑制圖.命名體制.第1部分:建筑物和建筑物各部分 |
(Construction drawings - Designation systems - Part 1: Buildings and parts of buildings) |
| ISO 4157-2-1998 |
建筑制圖.命名體制.第2部分:房間名稱與號碼 |
(Construction drawings - Designation systems - Part 2: Room names and numbers) |
| ISO 4157-3-1998 |
建筑制圖.命名體制.第3部分:房間識別 |
(Construction drawings - Designation systems - Part 3: Room identifiers) |
| ISO 4158-1978 |
硅鐵合金、硅錳鐵和硅鉻鐵.硅含量的測定.重量分析法 |
(Ferrosilicon, ferrosilicomanganese and ferrosilicochromium; Determination of silicon content; Gravimetric method) |
| ISO 4159-1978 |
錳鐵和硅錳鐵.錳含量的測定.電位滴定法 |
(Ferromanganese and ferrosilicomanganese; Determination of manganese content; Potentiometric method) |
| ISO 416-1974 |
風景明信片.通訊地址專用區 |
(Picture postcards; Area reserved for the address) |
| ISO 4161-1999 |
帶法蘭的六角螺母.粗螺紋 |
(Hexagon nuts with flange - Coarse thread) |
| ISO 4162-1990 |
法蘭六角螺栓.小型系列 |
(Hexagon flange bolts; small series) |
| ISO 4164-1978 |
道路車輛.輕便摩托車.發動機試驗規程.凈功率 |
(Road vehicles; Mopeds; Engine test code; Net power) |
| ISO 4165-2001 |
道路車輛.電氣連接裝置.雙極連接 |
(Road vehicles - Electrical connections - Double-pole connection) |
| ISO 4167-1979 |
繩索和繩索制品.聚烯烴農用細繩 |
(Ropes and cordage; Polyolefin agricultural twines) |
| ISO 4168-2002 |
時間測量儀表.輻射發光鍍層檢驗的條件 |
(Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits) |
| ISO 4170-1995 |
空中貨運設備.空運托盤網 |
(Air cargo equipment - Interline pallet nets) |
| ISO 4171-1993 |
空中貨運設備.聯運托盤 |
(Air cargo equipment; interline pallets) |
| ISO 4172-1991 |
技術制圖.建筑制圖.預制結構組裝件制圖 |
(Technical drawings; construction drawings; drawings for the assembly of prefabricated structures) |
| ISO 4173-1980 |
鉬鐵.鉬含量的測定.重量分析法 |
(Ferromolybdenum; Determination of molybdenum content; Gravimetric method) |
| ISO 4174-1998 |
谷類,含油種子和豆類.單向氣流通過批量谷物而引起的單位壓力損失的測定 |
(Cereals, oilseeds and pulses - Measurement of unit pressure loss in one-dimensional air flow through bulk grain) |
| ISO 4175-1979 |
造船.船載駁船,第1系列.主要尺寸 |
(Shipbuilding; Shipborne barges, series 1; Main dimensions) |
| ISO 4176-1981 |
肥料.硝酸氮含量的測定.硝酸試劑重量分析法 |
(Fertilizers; Determination of nitrate nitrogen content; Nitron gravimetric method) |
| ISO 4178-1980 |
滿裝的運輸包裝.分類檢驗.要記錄的信息 |
(Complete, filled transport packages; Distribution trials; Information to be recorded) |
| ISO 4179-1985 |
耐壓球墨鑄鐵管和常壓管路.水泥砂漿離心襯里.一般要求 |
(Ductile iron pipes for pressure and non-pressure pipelines; Centrifugal cement mortar lining; General requirements) |
| ISO 418-2001 |
攝影.沖洗用藥液.無水亞硫酸鈉規范 |
(Photography - Processing chemicals - Specifications for anhydrous sodium sulfite) |
| ISO 4180-1-1980 |
滿裝的運輸包裝.性能試驗計劃編制的一般規則.第1部分:一般原則 |
(Complete, filled transport packages; General rules for the compilation of performance test schedules; Part 1 : General principles) |
| ISO 4180-2-1980 |
滿裝的運輸包裝.性能試驗計劃表編制的一般規則.第2部分:定量的數據 |
(Complete, filled transport packages; General rules for the compilation of performance test schedules; Part 2 : Quantitative data) |
| ISO 4182-1999 |
汽車.前照燈光束角度隨載荷變化的測量 |
(Motor vehicles - Measurement of variations in dipped-beam headlamp angle as a function of load) |
| ISO 4183-1995 |
皮帶傳動.標準的和窄型三角皮帶.皮帶輪 |
(Belt drives - Classical and narrow V-belts - Grooved pulleys (system based on datum width)) |
| ISO 4184-1992 |
皮帶傳動.標準和窄三角皮帶.標準長度 |
(Belt drives; classical and narrow V-belts; lengths in datum system) |
| ISO 4185 Technical Corrigendum 1-1993 |
封閉管道內液體流量的測量.重量法.技術勘誤1 |
(Measurement of liquid flow in closed conduits; weighing method; technical corrigendum 1) |
| ISO 4185-1980 |
封閉管道內液體流量的測量.稱重法 |
(Measurement of liquid flow in closed conduits; Weighing method) |
| ISO 4186-1980 |
蘆筍.貯存指南 |
(Asparagus; Guide to storage) |
| ISO 4187-1980 |
辣根.貯存指南 |
(Horse-radish; Guide to storage) |
| ISO 4190-1-1999 |
電梯安裝.第1部分:I,II,III和VI類電梯 |
(Lift (US: Elevator) installation - Part 1: Class I, II, III and VI lifts) |
| ISO 4190-2-2001 |
電梯安裝.第2部分:Ⅳ類電梯 |
(Lift (US: Elevator) installation - Part 2: Class IV lifts) |
| ISO 4190-3-1982 |
載客電梯設施.第3部分:Ⅴ級服務電梯 |
(Passenger lift installations; Part 3 : Service lifts class V) |
| ISO 4190-5-1987 |
電梯和服務電梯(美國:電梯和小型送貨電梯).第5部分:控制裝置、信號和附屬裝備 |
(Lifts and service lifts (USA: Elevators and dumbwaiters); Part 5 : Control devices, signals and additional fittings) |
| ISO 4190-6-1984 |
電梯和服務電梯(美國:電梯和小型送貨電梯).第6部分:安裝在住宅樓內的載客電梯.計劃和選用 |
(Lifts and service lifts (USA : elevators and dumbwaiters); Part 6 : Passenger lifts to be installed in residential buildings; Planning and selection) |
| ISO 4192-1981 |
鋁和鋁合金.鉛含量的測定.火焰原子吸收光譜測定法 |
(Aluminium and aluminium alloys; Determination of lead content; Flame atomic absorption spectrometric method) |
| ISO 4193-1981 |
鋁和鋁合金.鉻含量的測定.火焰原子吸收光譜測定法 |
(Aluminium and aluminium alloys; Determination of chromium content; Flame atomic absorption spectrometric method) |
| ISO 4194-1981 |
鎂合金.鋅合量的測定.火焰原子吸收光譜測定法 |
(Magnesium alloys; Determination of zinc content; Flame atomic absorption spectrometric method) |
| ISO 4195-1-1987 |
輸送帶.耐熱性.第1部分:試驗方法 |
(Conveyor belts; Heat resistance; Part 1 : Test method) |
| ISO 4195-2-1988 |
輸送帶.耐熱性.第2部分:規范 |
(Conveyor belts; heat resistance; part 2: specifications) |
| ISO 4197-1989 |
土壤耕作設備.推土鏟.固定尺寸 |
(Equipment for working the soil; hoe blades; fixing dimensions) |
| ISO 4198-1984 |
表面活性劑.器皿人工洗滌劑.性能比較試驗指南 |
(Surface active agents; Detergents for hand dishwashing; Guide for comparative testing of performance) |
| ISO 420-1994 |
攝影.照相用化學藥品.溴化鉀規范 |
(Photography - Processing chemicals - Specifications for potassium bromide) |
| ISO 4200-1991 |
焊接和無縫平端鋼管.管的尺寸和單位長度重量的一覽表 |
(Plain end steel tubes, welded and seamless; general tables of dimensions and masses per unit length) |
| ISO 4202-1978 |
莫氏錐柄刀具用的外錐度為7/24的縮徑套筒 |
(Reduction sleeves with external 7/24 taper for tools with Morse taper shanks) |
| ISO 4203-1978 |
直柄刀具.傳動榫和插孔.尺寸 |
(Parallel shank tools; Driving tenons and sockets; Dimensions) |
| ISO 4204-1977 |
有莫氏錐柄和可拆式導銷90°尖底锪鉆 |
(Countersinks, 90 degrees, with Morse taper shanks and detachable pilots) |
| ISO 4205-1991 |
直柄實心導桿90°埋頭鉆 |
(Countersinks 90? with parallel shanks and solid pilots) |
| ISO 4206-1991 |
直柄實心導桿平頭鉆 |
(Counterbores with parallel shanks and solid pilots) |
| ISO 4207-1977 |
莫氏錐柄和可拆導銷的平底锪鉆 |
(Counterbores with Morse taper shanks and detachable pilots) |
| ISO 4208-1977 |
平底锪鉆和90°尖底锪鉆共用的可拆導銷.尺寸 |
(Detachable pilots for use with counterbores and 90 degrees countersinks; Dimensions) |
| ISO 4209-1-2001 |
載重汽車和公共汽車輪胎和輪輞(米制系列).第1部分:輪胎 |
(Truck and bus tyres and rims (metric series) - Part 1: Tyres) |
| ISO 4209-2-2001 |
載重汽車和客車的輪胎和輪輞(米制系列).第2部分:輪輞 |
(Truck and bus tyres and rims (metric series) - Part 2: Rims) |
| ISO 4210-1996 |
自行車.自行車的安全要求 |
(Cycles - Safety requirements for bicycles) |
| ISO 4211-1979 |
家具.表面抗冷液體性能的評定 |
(Furniture; Assessment of surface resistance to cold liquids) |
| ISO 4211-2-1993 |
家具.表面試驗.第2部分:耐濕熱性能的評定 |
(Furniture; tests for surfaces; part 2: assessment of resistance to wet heat) |
| ISO 4211-4-1988 |
家具.表面試驗.第4部分:耐沖擊性評估 |
(Furniture; Tests for surfaces; part 4: assessment of resistance to impact) |
| ISO 4217 Technical Corrigendum 1-2004 |
貨幣和資金的表示代碼.技術勘誤1 |
|
| ISO 4217-2001 |
貨幣和資金的表示代碼 |
(Codes for the representation of currencies and funds) |
| ISO 4219-1979 |
空氣質量.環境空氣中氣體硫化混合物的測定.取樣設備 |
(Air quality; Determination of gaseous sulphur compounds in ambient air; Sampling equipment) |
| ISO 422-1994 |
攝影.照相用化學藥品.硫酸對甲基氨苯酚酯規范 |
(Photography - Processing chemicals - Specifications for p-methylaminophenol sulfate) |
| ISO 4220-1983 |
環境空氣.氣態酸性空氣污染指標的測定.用指示器或端點電勢探測的滴定法 |
(Ambient air; Determination of a gaseous acid air pollution index; Titrimetric method with indicator or potentiometric end-point detection) |
| ISO 4221-1980 |
空氣質量.環境空氣中二氧化硫質量濃度的測定.釷試劑分光光度測定法 |
(Air quality; Determination of mass concentration of sulphur dioxide in ambient air; Thorin spectrophotometric method) |
| ISO 4223-1-2002 |
輪胎工業用一些術語的定義.第1部分:充氣輪胎 |
(Definitions of some terms used in the tyre industry - Part 1: Pneumatic tyres) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com