標準號 |
中文名稱 |
英文名稱 |
| ISO 17699-2003 |
鞋靴.鞋幫及鞋襯的試驗方法.水蒸氣的滲透性和吸收性 |
(ootwear - Test methods for uppers and lining - Water vapour permeability and absorption) |
| ISO 17699-2003 |
鞋靴.鞋幫及鞋襯的試驗方法.水蒸氣的滲透性和吸收性 |
|
| ISO 177-1988 |
塑料.增塑劑擴散的測定 |
Plastics; determination of migration of plasticizers |
| ISO 1770 AMD 1-1983 |
第1次修改 |
Solid-stem general purpose thermometers; amendment 1 |
| ISO 1770-1981 |
一般用途固體桿式溫度計 |
Solid-stem general purpose thermometers |
| ISO 17700-2004 |
鞋靴.鞋幫、鞋襯和鞋內襯試驗方法.耐摩擦色牢度 |
|
| ISO 17700-2004 |
鞋靴.鞋幫、鞋襯和鞋內襯試驗方法.耐摩擦色牢度 |
|
| ISO 17700-2004 |
鞋靴.鞋幫、鞋襯和鞋內襯試驗方法.耐摩擦色牢度 |
|
| ISO 17701-2003 |
鞋靴.鞋幫、鞋襯和內墊的試驗方法.色移 |
(Footwear - Test methods for uppers, lining and insocks - Colour migration) |
| ISO 17701-2003 |
鞋靴.鞋幫、鞋襯和內墊的試驗方法.色移 |
|
| ISO 17702-2003 |
鞋靴.鞋幫的試驗方法.防水性 |
(Footwear - Test methods for uppers - Water resistance) |
| ISO 17702-2003 |
鞋靴.鞋幫的試驗方法.防水性 |
|
| ISO 17703-2003 |
鞋靴.鞋幫的試驗方法.高溫特性 |
(Footwear - Test methods for uppers - High temperature behaviour) |
| ISO 17703-2003 |
鞋靴.鞋幫的試驗方法.高溫特性 |
|
| ISO 17704-2004 |
鞋靴.鞋幫、鞋襯和鞋內襯試驗方法.耐磨性 |
|
| ISO 17705-2003 |
鞋靴.鞋幫、鞋襯和內墊的試驗方法.隔熱性 |
(Footwear - Test methods for uppers, lining and insocks - Thermal insulation) |
| ISO 17705-2003 |
鞋靴.鞋幫、鞋襯和內墊的試驗方法.隔熱性 |
|
| ISO 17706-2003 |
鞋靴.鞋幫的試驗方法.抗拉強度和伸長度 |
(Footwear - Test methods for uppers - Tensile strength and elongation) |
| ISO 17706-2003 |
鞋靴.鞋幫的試驗方法.抗拉強度和伸長度 |
|
| ISO 17708-2003 |
鞋靴.整鞋的試驗方法.外鞋底的附著力 |
(Footwear - Test methods for whole shoe - Upper sole adhesion) |
| ISO 17708-2003 |
鞋靴.整鞋的試驗方法.外鞋底的附著力 |
|
| ISO 17709-2004 |
鞋靴.樣品和試件的調節時間、取樣位置和制備 |
|
| ISO 1771 AMD 1-1983 |
第1次修改 |
Enclosed-scale general purpose thermometers; amendment 1 |
| ISO 1771-1981 |
一般用途封閉式標度溫度計 |
Enclosed-scale general purpose thermometers |
| ISO 17710-2002 |
塑料.用微量滴法對聚亞胺酯生產中用的多醇不飽和度的測定 |
Plastics - Polyols for use in the production of polyurethane - Determination of degree of unsaturation by microtitration |
| ISO 1772-1975 |
實驗室用瓷坩堝和二氧化硅坩堝 |
Laboratory crucibles in porcelain and silica |
| ISO 17724-2003 |
圖形符號.詞匯 |
(Graphical symbols - Vocabulary) |
| ISO 17724-2003 |
圖形符號.詞匯 |
|
| ISO 1773-1997 |
實驗室玻璃器皿.細頸燒瓶 |
Laboratory glassware - Narrow-necked boiling flasks |
| ISO 17733-2004 |
車間空氣.汞和無機汞化合物的測定.低溫蒸氣原子吸收分光光度測定法或原子熒光分光光度測定法 |
|
| ISO 17733-2004 |
車間空氣.汞和無機汞化合物的測定.低溫蒸氣原子吸收分光光度測定法或原子熒光分光光度測定法 |
|
| ISO 17744-2004 |
塑料.作為溫度和壓力函數的比容的測定(pvT圖).活塞裝置法 |
|
| ISO 1775-1975 |
實驗室瓷制器具.要求和試驗方法 |
Porcelain laboratory apparatus; Requirements and methods of test |
| ISO 1776-1985 |
玻璃.在100 ℃耐鹽酸腐蝕性.火焰反射或火焰原子吸收光譜測定法 |
Glass; Resistance to attack by hydrochloric acid at 100 degrees C; Flame emission or flame atomic absorption spectrometric method |
| ISO 17771-2003 |
塑料.熱固性模塑料.片狀成型料(SMC)中玻璃纖維浸潤度的測定 |
(Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC) |
| ISO 17771-2003 |
塑料.熱固性模塑料.片狀成型料(SMC)中玻璃纖維浸潤度的測定 |
|
| ISO 17776-2000 |
石油和天然氣工業.海上生產裝置.危險識別和風險評定用工具和技術的指南 |
Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment |
| ISO 178 AMD 1-2004 |
塑料.彎曲性能測定.修改件1:精密度說明 |
|
| ISO 178 AMD 1-2004 |
塑料.彎曲性能測定.修改件1:精密度說明 |
|
| ISO 178 AMD 1-2004 |
塑料.彎曲性能測定.修改件1:精密度說明 |
|
| ISO 178-2001 |
塑料.彎曲性能測定 |
Plastics - Determination of flexural properties |
| ISO 1780-1984 |
電影攝影.8mm S-1型電影攝影機膠片盒.片窗、攝影機片窗形式、膠片位置和壓板及壓板平直度.尺寸和規范 |
Cinematography; Motion-picture camera cartridge, 8 mm Type S Model I; Aperture, camera aperture profile, film position, pressure pad and pressure pad flatness; Dimensions and specifications |
| ISO 1781-1983 |
電影攝影.直接正面放映的8mmS型電影膠片放映機的用法 |
Cinematography; Projector usage of 8 mm Type S motion-picture film for direct front projection |
| ISO 1783-1973 |
鎂合金.鋅的測定.容量法 |
Magnesium alloys; Determination of zinc; Volumetric method |
| ISO 17834-2003 |
熱噴涂.高溫下抗腐蝕耐氧化保護涂層 |
|
| ISO 17836-2004 |
熱噴涂.熱噴涂熔敷效率的測定 |
|
| ISO 1784-1976 |
鋁合金.鋅含量的測定.乙二胺四乙酸滴定法 |
Aluminium alloys; Determination of zinc; EDTA titrimetric method |
| ISO 17846-2004 |
焊接及相關工藝.健康和安全.電弧焊接和切割用設備和消耗品的無字預警標簽 |
|
| ISO 1785-1983 |
電影技術.在穿孔8mm S(1-4)型的16mm電影膠片上拷貝的8mm,S型影象區.位置和尺寸 |
Cinematography; Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4); Position and dimensions |
| ISO 17853 Technical Corrigendum 1-2004 |
植入物材料的磨損.聚酯和金屬磨損粒子.離析、表征和量化.技術勘誤1 |
|
| ISO 17853-2003 |
植入材料的磨損.聚酯和金屬磨損粒子.離析、表征和量化 |
(Wear of implant materials - Polymer and metal wear particles - Isolation, chacterization and quantification) |
| ISO 17853-2003 |
植入材料的磨損.聚酯和金屬磨損粒子.離析、表征和量化 |
|
| ISO 1787-1984 |
電影技術.8mm S型電影膠片電影攝影機的用法.規范 |
Cinematography; Camera usage of 8 mm Type S motion-picture film; Specifications |
| ISO 17873-2004 |
核設施.除核反應堆之外的核裝置用通風系統的設計和運行標準 |
|
| ISO 17874-1-2004 |
放射性物質用遙控裝卸設備.第1部分:一般要求 |
|
| ISO 17874-2-2004 |
放射性物質用遙控裝卸設備.第2部分:仿效機械手 |
|
| ISO 17884-2004 |
船舶和海上技術.快艇用探照燈 |
|
| ISO 17893-2004 |
鋼絲繩.詞匯、名稱與符號及分類 |
|
| ISO 17899-2004 |
船舶和海上技術.船用電擋風玻璃刮水器 |
|
| ISO 179-1-2000 |
塑料.擺式?jīng)_擊性能的測定.第1部分:無損沖擊試驗 |
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test |
| ISO 179-2 Technical Corrigendum 1-1998 |
塑料.擺錘式?jīng)_擊特性的測定.第2部分:儀器沖擊試驗.技術勘誤1 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test; Technical Corrigendum 1 |
| ISO 179-2-1997 |
塑料.擺錘式?jīng)_擊特性的測定.第2部分:儀器沖擊試驗 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test |
| ISO 17900-2002 |
農用掛車.帶平衡裝置的半懸掛式掛車.有效負載,垂直靜止負載及軸載的測定 |
Agricultural trailers - Balanced and semi-mounted trailers - Determination of payload, vertical static load and axle load |
| ISO 1791-1983 |
建筑結構.模數協調.詞匯.兩種語言版 |
Building construction; Modular co-ordination; Vocabulary Bilingual edition |
| ISO 17925-2004 |
鋼上鋅和/或鋁基涂層.單位面積涂層質量和化學組分的測定.重量分析法、感應耦合等離子體原子輻射光譜測定法和火焰原子吸收光譜測定法 |
|
| ISO 1793-1975 |
電影技術.16mm電影放映機用片盒(容量可達120m:尺寸18cm).尺寸 |
Cinematography; Reels for 16 mm motion-picture projectors (up to and including 120 m capacity : 18 cm size); Dimensions |
| ISO 17933-2000 |
GEDI.通用電子文件交換 |
GEDI - Generic Electronic Document Interchange |
| ISO 1795-2000 |
生橡膠、天然橡膠和合成橡膠.取樣和樣品制備規程 |
Rubber, raw natural and raw synthetic - Sampling and further preparative procedures |
| ISO 1795-2000 |
生橡膠、天然橡膠和合成橡膠.取樣和樣品制備規程 |
Rubber, raw natural and raw synthetic - Sampling and further preparative procedures |
| ISO 1797-1 AMD 1-1997 |
牙科用旋轉器械.柄.第1部分:金屬柄.補充件1 |
Dental rotary instruments - Shanks - Part 1: Shanks made of metals; Amendment 1 |
| ISO 1797-1-1992 |
牙科用旋轉器械.柄.第1部分:金屬柄 |
Dental rotary instruments; shanks; part 1: shanks made of metals |
| ISO 1797-2-1992 |
牙科用旋轉器械.柄.第2部分:塑料柄 |
Dental rotary instruments; shanks; part 2: shanks made of plastics |
| ISO 17973-2002 |
表面化學分析.中分辨率螺旋電子光譜儀.素分析用能量標度的校準 |
Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis |
| ISO 17974-2002 |
表面化學分析.高分辨率螺旋電子光譜儀.素和化學狀態分析用能量標度的校準 |
Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis |
| ISO 1798 Technical Corrigendum 1-2003 |
軟質泡沫聚合材料.拉伸強度和斷裂伸長率的測定 術勘誤1 |
(Flexible cellular polymeric materials - Determination of tensile strength and elongation at break; Technical Corrigendum 1 ) |
| ISO 1798 Technical Corrigendum 1-2003 |
軟質泡沫聚合材料.拉伸強度和斷裂伸長率的測定 術勘誤1 |
|
| ISO 1798-1997 |
柔性泡沫聚合材料.拉力強度和斷裂時延伸率的測定 |
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break |
| ISO 17993-2002 |
水質.液體萃取后通過用熒光檢測的高效液體光譜分析法(HPLC)測定15種多環芳香碳氫化合物(PAK)(F18) |
Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction |
| ISO 17994-2004 |
水質.微生物方法之間的等效性建立規則 |
|
| ISO 17997-1-2004 |
牛奶.酪蛋白-氮含量的測定.第1部分:間接法(參照法) |
|
| ISO 17997-2-2004 |
牛奶.酪蛋白-氮含量的測定.第2部分:直接法 |
|
| ISO 18-1981 |
文獻工作.期刊目次表 |
Documentation; Contents list of periodicals |
| ISO 180-2000 |
塑料.伊兆特(Izod)沖擊強度的測定 |
Plastics - Determination of Izod impact strength |
| ISO 1802-1992 |
天然橡膠膠乳濃縮物.硼酸含量的測定 |
Natural rubber latex concentrate; determination of boric acid content |
| ISO 1803-1997 |
建筑結構.公差.尺寸精度的表示法.原則和術語 |
Building construction - Tolerances - Expression of dimensional accuracy - Principles and terminology |
| ISO 1804-1972 |
門.術語 |
Doors; Terminology |
| ISO 1805-1973 |
網漁具.網衣線斷裂負荷和打結斷裂負荷的測定 |
Fishing nets; Determination of breaking load and knot breaking load of netting yarns |
| ISO 18054-2004 |
鳶尾根莖油.鐵含量的測定.毛細管柱氣體色譜法 |
|
| ISO 18055-1-2004 |
攝影和成像.噴墨介質:分類、命名和尺寸.第1部分:攝影級介質(相紙和膠片) |
|
| ISO 1806-2002 |
漁網.網眼斷裂力的測定 |
Fishing nets - Determination of mesh breaking force of netting |
| ISO 18064-2003 |
熱塑彈性體.命名和縮略語 |
(Thermoplastic elastomers - Nomenclature and abbreviated terms) |
| ISO 18064-2003 |
熱塑彈性體.命名和縮略語 |
|
| ISO 18064-2003 |
熱塑彈性體.命名和縮略語 |
|
| ISO 18064-2003 |
熱塑彈性體.命名和縮略語 |
|
| ISO 1807-1975 |
松散物料的連續機械裝卸設備.有搖動式或往復式送料機的矩形或梯形槽的振動式輸送機 |
Continuous mechanical handling equipment for loose bulk materials; Oscillating conveyors and shaking or reciprocating feeders with rectangular or trapezoidal trough |
| ISO 18073-2004 |
水質.三氯至八氯二氧雜環乙烯和呋喃的測定.同位素稀釋HRGC/HRMS法 |
|
| ISO 1809-1977 |
紡織機械和附件.紗筒管的模型的型式.名稱.三種語言版 |
Textile machinery and accessories; Types of formers for yarn packages; Nomenclature Trilingual edition |
| ISO 181-1981 |
塑料.與熾熱棒相接觸的呈小試樣狀硬質塑料易燃特性的測定 |
Plastics; Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod |
| ISO 1810-1976 |
銅合金.鎳含量(低含量)的測定.丁二酮肟分光光度法 |
Copper alloys; Determination of nickel (low contents); Dimethylglyoxime spectrophotometric method |
| ISO 18104-2003 |
醫療信息.護理用參考術語模式的綜合 |
|
| ISO 1811-1-1988 |
銅和銅合金.化學分析試樣的選擇和制備.第1部分:鑄造產品的取樣 |
Copper and copper alloys; selection and preparation of samples for chemical analysis; part 1: sampling of cast unwrought products |
| ISO 1811-2-1988 |
銅和銅合金.化學分析試樣的選擇和制備.第2部分:鍛造及鑄造產品的取樣 |
Copper and copper alloys; selection and preparation of samples for chemical analysis; part 2: sampling of wrought products and castings |
| ISO 18114-2003 |
表面化學分析.次級離子質譜法.測定離子注入標樣中的相對靈敏度系數 |
(Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials) |
| ISO 18114-2003 |
表面化學分析.次級離子質譜法.測定離子注入標樣中的相對靈敏度系數 |
|
| ISO 18115-2001 |
表面化學分析.詞匯 |
Surface chemical analysis - Vocabulary |
| ISO 18118-2004 |
表面化學分析.俄歇電子光譜法和X射線光電子光譜法.同質材料定量分析用實驗室測定相對敏感性因子的使用指南 |
|
| ISO 1812-1976 |
銅合金.鐵含量的測定.1,10-菲羅啉分光光度法 |
Copper alloys; Determination of iron content; 1,10- Phenanthroline spectrophotometric method |
| ISO 1813-1998 |
皮帶驅動.加肋V帶、有接頭V帶和包括寬截面皮帶及六角皮帶在內的V帶.抗靜電皮帶的導電率.特性和試驗方法 |
Belt drives - V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts - Electrical conductivity of antistatic belts: Characteristics and methods of test |
| ISO 18144-2003 |
環境中的煙草煙霧.可吸入的懸浮粒子的估算.基于茄呢醇的方法 |
(Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Method based on solanesol) |
| ISO 18144-2003 |
環境中的煙草煙霧.可吸入的懸浮粒子的估算.基于茄呢醇的方法 |
|
| ISO 18145-2003 |
環境中的煙草煙霧.空氣中蒸氣態煙堿和3-乙烯基吡啶的測定.氣相色譜法 |
(Environmental tobacco smoke - Determination of vapour phase nicotine and 3-ethenylpyridine in air - Gas chromatographic method) |
| ISO 18145-2003 |
環境中的煙草煙霧.空氣中蒸氣態煙堿和3-乙烯基吡啶的測定.氣相色譜法 |
|
| ISO 1815-1975 |
松散物料的連續機械裝卸設備.管型槽的振動式送料機和輸送機 |
Continuous mechanical handling equipment for loose bulk materials; Vibrating feeders and conveyors with tubular trough |
| ISO 18153-2003 |
體外診斷醫療裝置.生物樣品的定量測量.校準儀和控制材料所賦酶的催化濃度值的計量溯源性 |
(In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials ) |
| ISO 18153-2003 |
體外診斷醫療裝置.生物樣品的定量測量.校準儀和控制材料所賦酶的催化濃度值的計量溯源性 |
|
| ISO 1816-1975 |
松散物料和整裝裝載的連續機械裝卸設備.皮帶輸送機.機動傳動皮帶輪的基本特性 |
Continuous mechanical handling equipment for loose bulk materials and unit loads; Belt conveyors; Basic characteristics of motorized driving pulleys |
| ISO 18165-2001 |
石油和天然氣工業.水泥漂浮設備的性能試驗 |
Petroleum and natural gas industries - Performance testing of cementing float equipment |
| ISO 1817-1999 |
硫化橡膠.對液體影響的測定 |
Rubber, vulcanized - Determination of the effect of liquids |
| ISO 18175-2004 |
無損檢驗.不使用電子測量儀器評價超聲脈沖回波檢驗系統的性能特征 |
|
| ISO 1819-1977 |
連續機械裝卸設備.安全規范.一般規則 |
Continuous mechanical handling equipment; Safety code; General rules |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com