標準號 |
中文名稱 |
英文名稱 |
| ISO/TS 24348-2003 |
眼科光學.眼鏡架.從金屬包覆的和合成眼鏡架中釋放的鎳的探測和磨損模擬法 |
(Ophthalmic optics - Spectacle frames - Method for the simulation of wear and detection of nickel release from coated metal and combination spectacle frames) |
| ISO/TS 24348-2003 |
眼科光學.眼鏡架.從金屬包覆的和合成眼鏡架中釋放的鎳的探測和磨損模擬法 |
|
| ISO/TS 29001-2003 |
石油、化工和天然氣工業.部門專用質量管理系統.產品和服務機構的要求 |
(Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations) |
| ISO/TS 29001-2003 |
石油、化工和天然氣工業.部門專用質量管理系統.產品和服務機構的要求 |
|
| ISO/TS 3632-1-2003 |
藏紅花.第1部分:規范 |
(Saffron (Crocus sativus L.) - Part 1: Specification) |
| ISO/TS 3632-1-2003 |
藏紅花.第1部分:規范 |
|
| ISO/TS 3632-2-2003 |
藏紅花.第2部分:試驗方法 |
(Saffron (Crocus sativus L.) - Part 2: Test methods) |
| ISO/TS 3632-2-2003 |
藏紅花.第2部分:試驗方法 |
|
| ISO/TS 4949-2003 |
基于字母符號的鋼的名稱 |
(Steel names based on letter symbols) |
| ISO/TS 4949-2003 |
基于字母符號的鋼的名稱 |
|
| ISO/TS 6090-2004 |
奶和奶粉、酪乳和酪乳粉、乳清和乳清粉.磷酸酶活性的檢測 |
|
| ISO/TS 9250-1-2004 |
土工機械.同義術語的多語種列表.第1部分:通則 |
|
| ISO/TS 9250-2-2004 |
土工機械.同義術語的多語種列表.第2部分:性能和尺寸 |
|
| ISO/TS 9941-2003 |
牛奶和罐裝淡煉乳.錫含量的測定.分光光譜測定法 |
|
| ISO/TS 9941-2003 |
牛奶和罐裝淡煉乳.錫含量的測定.分光光譜測定法 |
|
| O) of water from fruit juices - Method using isotope ration mass spectrometry> |
O) of water from fruit juices - Method using isotope ration mass spectrometry> |
水果和蔬菜汁果汁中水的穩定氧同位素比測定18O/16O同位素比質譜分析法 |
| PD CR ISO 13434-1999 |
土工織物和土工織物相關產品耐久性指南 |
Guidelines on durability of geotextiles and geotextile-related products |
| PD CR ISO 17663-2001 |
焊接.與焊接和相關工藝有關的熱處理的質量要求導則 |
Welding. Guidelines for quality requirements for heat treatment in connection with welding and allied processes |
| PD ISO/IEC Guide 71-2001 |
滿足老年人和殘疾人需要的標準制定者導則 |
(Guidelines for standards developers to address the needs of older persons and persons with disabilities) |
| PD ISO/TR 10013-2001 |
質量管理系統文件導則 |
(Guidelines for quality management system documentation) |
| PD ISO/TR 11018-2001 |
香精油.閃點測定的一般指南 |
(Essential oils. General guidance on the determination of flashpoint) |
| PD ISO/TR 13570-2001 |
有關輪椅的ISO 7176系列標準的應用指南 |
(Guidelines for the application of the ISO 7176 series on wheelchairs) |
| PD ISO/TR 13881-2001 |
石油和天然氣工業.產品、加工和服務的分類和合格評定 |
(Petroleum and natural gas industries. Classification and conformity assessment of products, processes and services) |
| PD ISO/TR 14032-2000 |
環境管理.環境性能評定(EPE)的例證 |
(Environmental management. Examples of environmental performance evaluation (EPE)) |
| PD ISO/TR 14061-1999 |
使用環境管理系統標準ISO 14001和ISO 14004時的輔助林業組織信息 |
(Information to assist forestry organizations in the use of environmental management system standards ISO 14001 and ISO 14004) |
| PD ISO/TR 14672-2001 |
圖形技術.ISO 12640規定的普通SCID圖形統計 |
(Graphic technology. Statistics of the natural SCID images defined in ISO 12640) |
| PD ISO/TR 15489-2-2001 |
信息和文獻工作.記錄品管理.指南 |
(Information and documentation. Records management. Guidelines) |
| PD ISO/TR 17663-2001 |
焊接.與焊接和相關工藝有關的熱處理的質量要求導則 |
(Welding. Guidelines for quality requirements for heat treatment in connection with welding and allied processes) |
| PD ISO/TR 18930-2001 |
成像材料.戶外風化試驗協議 |
(Imaging materials. Protocols for outdoor weathering experiments) |
| PD ISO/TR 18931-2001 |
成像材料.濕度測量和控制的推薦方法 |
(Imaging materials. Recommendations for humidity measurement and control) |
| PD ISO/TR 19033-2000 |
技術產品文獻.建筑文獻用數據 |
(Technical product documentation. Metadata for construction documentation) |
| PD ISO/TR 20461-2001 |
用重量分析法測定容積測量的不確定度 |
(Determination of uncertainty for volume measurements made using the gravimetric method) |
| PD ISO/TR 210-2000 |
香精油.包裝、狀態調節和儲存的一般規則 |
(Essential oils. General rules for packaging, conditioning and storage) |
| PD ISO/TR 211-2000 |
香精油.容器加標簽和作標記的一般規則 |
(Essential oils. General rules for labelling and marking of containers) |
| prEN ISO 10052-2000 |
聲學空中噪聲和碰撞聲隔音及設備噪聲的現場測量測量法 |
Acoustics - Field measurements of airborne and impact sound insulation and of equipment sound - Survey method (ISO/DIS 10052:2000) |
| prEN ISO 10085-2000 |
消防車和消防設備操作控制及其他顯示符號 |
Fire fighting vehicles and equipment - Symbols for operator controls and other displays (ISO/DIS 10085:2000) |
| prEN ISO 10240-2002 |
小艇艇主手冊 |
Small craft - Owners manual (ISO/DIS 10240:2002) |
| prEN ISO 10297-2002 |
可運輸?shù)臍馄块y門規范及定型試驗 |
Transportable gas cylinders - Cylinder valves - Specification and type testing (ISO/DIS 10297:2002) |
| prEN ISO 10318-2000 |
土工合成材料土工布及相關產品、土工膜及土工合成粘土襯術語及其定義 |
Geosynthetics - Geotextiles, geotextile-related products, geomembranes and geosynthetic clay liners - Terms and theirdefinitions (ISO/DIS 10318:2000) |
| prEN ISO 10351-1996 |
塑料用125mm火焰測定樣品可燃性 |
Plastics - Determination of the combustibility of specimens using a 125 mm flame source (ISO/DIS 10351:1996) |
| prEN ISO 10354-2000 |
粘合劑結構粘合劑膠接組件間耐久特性楔形破裂試驗 |
Adhesives - Caracterization of durability of structural-adhesive-bonded assemblies - Wedge rupture test (ISO 10354:1992) |
| prEN ISO 10366-2-2003 |
塑料甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯(MABS)模塑和擠塑材料第2部分：試樣的制備和性能的測定 |
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/FDIS 10366-2:2003) / Note: Intended as replacement for EN ISO 10366-2 (199 |
| prEN ISO 10434-2002 |
石油和天然氣工業用螺栓帽狀鋼閘閥 |
Bolted bonnet steel gate valves for petroleum and natural gas industries (ISO/DIS 10434:2002) |
| prEN ISO 10468-1999 |
塑料管玻璃纖維增增強熱固塑料管 在濕環境中長期特殊環形蠕變勁度的測定及濕蠕變因子的計算 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor (ISO/DIS 10468:1999) |
| prEN ISO 10497-2002 |
閥門試驗閥門耐火試驗要求 |
Testing of valves - Fire type-testing requirements (ISO/DIS 10497:2002) |
| prEN ISO 105-B06-2003 |
紡織品色牢度試驗第B06部分：耐高溫人造光色牢度：氙弧燈試驗 |
Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (ISO 105-B06:1998, including Amendment 1:2002) |
| prEN ISO 105-E01-1995 |
紡織品色牢度試驗第E01部分：耐水色牢度 |
Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:1994) |
| prEN ISO 105-E04-1995 |
紡織品色牢度試驗第E04部分：耐汗?jié)n色牢度 |
Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:1994) |
| prEN ISO 10618-2002 |
碳纖維樹脂浸漬紗拉伸性能的測定 |
Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO/DIS 10618:2002) |
| prEN ISO 10806-2003 |
管道工程皺紋軟金屬管用非合金及不銹鋼配件 |
Pipework - Fittings for corrugated metallic hoses (ISO/FDIS 10806:2003) |
| prEN ISO 10821-1998 |
工業縫紉機縫紉機、裝置和系統的安全要求 |
Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO/DIS 10821:1998) |
| prEN ISO 10848-1-1999 |
聲學毗連房間之間沖擊噪聲和空氣中噪聲沿側面?zhèn)鬟f的實驗測量第1部分：框架文件 |
Acoustics - Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms - Part 1: Frame document |
| prEN ISO 10848-2-2001 |
聲學毗連房間之間沖擊噪聲和空氣中噪聲沿側面?zhèn)鬟f的實驗測量第2部分：接合處有小影響的輕質件的應用 |
Acoustics - Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms - Part 2: Application to light elements when the junction has a small influence (ISO/DIS 10848-2:2001) |
| prEN ISO 10848-3-2001 |
聲學毗連房間之間沖擊噪聲和空氣中噪聲沿側面?zhèn)鬟f的實驗測量第3部分：接合處有實質性影響的輕質件的 |
Acoustics - Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms - Part 3: Application to light elements when the junction has a substantial influence (ISO/DIS 10848-3:2001) |
| prEN ISO 10993-3-2003 |
醫療器械的生物學評價第3部分：遺傳毒性、致癌性和生殖毒性試驗 |
Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO/FDIS 10993-3:2003) / Note: Intended as replacement for EN 30993-3 (1993-12). |
| prEN ISO 11111-1-2002 |
紡織機械安全要求第1部分：一般要求 |
Textile machinery - Safety requirements - Part 1: Common requirements (ISO/DIS 11111-1:2002) |
| prEN ISO 11111-2-2002 |
紡織機械安全要求第2部分：紡紗準備機和紡紗機 |
Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO/DIS 11111-2:2002) |
| prEN ISO 11111-3-2002 |
紡織機械安全要求第3部分：無紡紗機 |
Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO/DIS 11111-3:2002) |
| prEN ISO 11111-4-2002 |
紡織機械安全要求第4部分：紗線加工機及制繩機 |
Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO/DIS 11111-4:2002) |
| prEN ISO 11111-5-2002 |
紡織機械安全要求第5部分：編織和針織準備機 |
Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO/DIS 11111-5:2002) |
| prEN ISO 11111-6-2002 |
紡織機械安全要求第6部分：織物制造機 |
Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO/DIS 11111-6:2002) |
| prEN ISO 11111-7-2002 |
紡織機械安全要求第7部分：印染機和精整機 |
Textile machinery - Safety requirements - Part 7: Dyeing and finishing machines (ISO/DIS 11111-7:2002) |
| prEN ISO 11197-2002 |
醫用供電裝置/注：僅僅適合于與EN 60601-(1990-08)一起使用 |
Medical supply units (ISO/DIS 11197:2002) / Note: Applies only in conjunction with EN 60601-1 (1990-08) |
| prEN ISO 11205-2003 |
聲學機器和設備發出的噪聲用聲強法測定工作現場和其它特定位置發出的噪聲聲壓級用 工程法 |
Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO/FDIS 11205:2003) |
| prEN ISO 11219-1996 |
氣瓶氣瓶與瓶閥連接用17E錐螺紋檢驗量規 |
Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Inspection gauges (ISO/DIS 11219:1996) |
| prEN ISO 1133-2003 |
塑料 熔體質量流動速率(MFR)和熔體體積流動速率(MFR)的測定 |
Plastics - Determination of the melt-mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO/DIS 1133:2003) / Note: Intended as replacement for EN ISO 1133 (1999-05). |
| prEN ISO 11337-2001 |
塑料酰胺用氣相色譜法測定e-已內酰胺和w-月桂內酰胺 |
Plastics - Polyamides - Determination of e-caprolactam and w-laurolactam by gas chromatography (ISO/DIS 11337:2001) |
| prEN ISO 11403-2-2002 |
塑料可比多點數據的采集和表示第2部分：熱和加工性能 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO/DIS 11403-2:2002) |
| prEN ISO 11553-1-2002 |
機械安全激光加工機械安全要求 |
Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO/DIS 11553-1:2002) / Note: Intended as replacement for EN 12626 (1997-02). |
| prEN ISO 11611-2003 |
焊接及相關工藝用防護服 |
Protective clothing for use in welding and allied processes (ISO/DIS 11611:2003) |
| prEN ISO 11612-2001 |
防護服防熱及防火焰用防護服 |
Protective clothing - Clothing to protect against heat and flame (ISO/DIS 11612:2001) |
| prEN ISO 11681-1-2002 |
林業機械便攜式鏈鋸的安全要求和試驗第1部分：林業專用鏈鋸 |
Machinery for forestry - Portable chain-saws; Safety requirements and testing - Part 1: Chain-saws for nomal forest work (ISO/DIS 11681-1:2002) |
| prEN ISO 11715-1994 |
光學鏡片加工用數據載體的數字?jǐn)?shù)據記錄 |
Digital data record for data carriers for the processing of spectacle lenses (ISO/DIS 11715:1994) |
| prEN ISO 1183-1-2003 |
塑料非泡沫塑料的密度測定方法第1部分：浸液方法液體比重瓶法和滴定法 |
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO/FDIS 1183-1:2003) |
| prEN ISO 1183-4-1998 |
塑料非泡沫塑料的密度測定方法第4部分：氣體比重瓶法 |
Plastics - Methods for determining the density of non-cellular plastics - Part 4: Gas pyknometer method (ISO/DIS 1183-4:1998) |
| prEN ISO 11904-2-2001 |
聲學耳朵接收到的來自封閉噪聲源的噪聲量的測定第2部分：使用人體模型技術(人體模型技術) |
Acoustics - Determination of sound immissions from sound sources placed closed to the ear - Part 2: Technique using a manikin (manikin-technique) (ISO/DIS 11904-2:2001) |
| prEN ISO 12009-1994 |
紡織品及紡織制品燃燒性工業用紡織品測定空氣過濾器燃燒性的詳細工藝可燃性 |
Textiles and textile products - Burning bevaviour - Industrial and technical textiles - Detailed procedure to determine the burning behaviour of air filters - Ignitability (ISO/DIS 12009:1994) |
| prEN ISO 1210-1996 |
塑料在與小火源接觸中水平與垂直樣品燃燒性能的測定 |
Plastics - Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source (ISO/DIS 1210:1996) |
| prEN ISO 12100-1-2003 |
機械安全 設計用的基本概念、一般原則 第1部分：基本術語、方法論 |
Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO/FDIS 12100-1:2003) |
| prEN ISO 12100-2-2003 |
機械安全 設計用的基本概念、一般原則 第2部分：技術原則 |
Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO/FDIS 12100-2:2003) |
| prEN ISO 12180-1-1999 |
產品幾何量技術規范(GPS)圓柱度第1部分：詞匯 |
Geometrical Product Specifications (GPS) - Cylindricity - Part 1: Vocabulary (ISO/DIS 12180-1:1999) |
| prEN ISO 12180-2-1999 |
產品幾何量技術規范(GPS)圓柱度第2部分：操作員規范 |
Geometrical Product Specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO/DIS 12180-2:1999) |
| prEN ISO 12181-1-1999 |
產品幾何量技術規范(GPS)圓度第1部分：詞匯 |
Geometrical Product Specifications (GPS) - Roundness - Part 1: Vocabulary (ISO/DIS 12181-1:1999) |
| prEN ISO 12181-2-1999 |
產品幾何量技術規范(GPS)圓度第2部分：操作員規范 |
Geometrical Product Specifications (GPS) - Roundness - Part 2: Specification operators (ISO/DIS 12181-2:1999) |
| prEN ISO 12226-1-1997 |
焊藥第1部分：分類及試驗方法 |
Solder pastes - Part 1: Classification and test methods (ISO/DIS 12226-1:1997) |
| prEN ISO 12402-1-2003 |
個人救生裝置第1部分：A級(SOLAS救生衣)的安全要求 |
Personal flotation devices - Part 1: Lifejackets for seagoing ships; Safety requirements (ISO/DIS 12402-1:2003) |
| prEN ISO 12402-2-2003 |
個人救生裝置第2部分：B級(海邊救生衣、極限條件275牛頓)的安全要求 |
Personal flotation devices - Part 2: Lifejackets for extreme offshore conditions (level 275); Safety requirements (ISO/DIS 12402-2:2003) |
| prEN ISO 12402-3-2003 |
個人救生裝置第3部分：C級(近海救生衣、150牛頓)的安全要求 |
Personal flotation devices - Part 3: Lifejackets for offshore conditions (level 150); Safety requirements (ISO/DIS 12402-3:2003) |
| prEN ISO 12402-4-2003 |
個人救生裝置第4部分：D級(內陸/海邊救生衣、100牛頓)的安全要求 |
Personal flotation devices - Part 4: Lifejackets for inland/close to shore conditions (level 100); Safety requirements (ISO/DIS 12402-4:2003) |
| prEN ISO 12402-5-2003 |
個人救生裝置第5部分：E級(飄浮裝置、50牛頓)的安全要求 |
Personal flotation devices - Part 5: Buoyancy aids (level 50); Safety requirements (ISO/DIS 12402-5:2003) |
| prEN ISO 12402-8-2003 |
個人救生裝置第8部分：附屬裝置的安全要求及試驗方法 |
Personal flotation devices - Part 8: Accessories; Safety requirements and test methods (ISO/DIS 12402-8:2003) |
| prEN ISO 12402-9-2003 |
個人救生裝置第9部分：A至F級救生裝置的試驗方法 |
Personal flotation devices - Part 9: Test methods (ISO/DIS 12402-9:2003) |
| prEN ISO 12567-2-2000 |
門、窗熱性能熱箱法測定傳熱系數第2部分：天窗和其他窗 |
Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projection windows (ISO/DIS 12567-2:2000) |
| prEN ISO 12707-2000 |
無損檢測術語磁粉檢測用術語 |
Non destructive testing - Terminology - Terms used in magnetic particle testing (ISO/DIS 12707:2000) |
| prEN ISO 12780-1-1999 |
產品幾何量技術規范(GPS)平面性第1部分：詞匯 |
Geometrical Product Specifications (GPS) - Flatness - Part 1: Vocabulary (ISO/DIS 12780-1:1999) |
| prEN ISO 12780-2-2001 |
產品幾何量技術規范(GPS)直線性第1部分：操作員規范 |
Geometrical Product Specifications (GPS) - Straightness - Part 2: Specification operators (ISO/DIS 12780-2:2001) |
| prEN ISO 12781-1-1999 |
產品幾何量技術規范(GPS)平面性第1部分：詞匯 |
Geometrical Product Specifications (GPS) - Flatness - Part 1: Vocabulary (ISO/DIS 12781-1:1999) |
| prEN ISO 12781-2-1999 |
產品幾何量技術規范(GPS)平面性第1部分：操作員規范 |
Geometrical Product Specifications (GPS) - Flatness - Part 2: Specification operators (ISO/DIS 12781-2:1999) |
| prEN ISO 12870-2002 |
眼科光學眼鏡鏡框要求和試驗方法 |
Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO/DIS 12870:2002) |
| prEN ISO 12957-1-1997 |
土工布及相關產品摩擦特性的測定第1部分：直接剪切試驗 |
Geotextiles and geotextile-related products - Determination of the friction characteristics - Part 1: Direct shear test (ISO/DIS 12957-1:1997) |
| prEN ISO 12957-2-1997 |
土工布及相關產品摩擦特性的測定第2部分：斜面試驗 |
Geotextiles and geotextile-related products - Determination of the friction characteristics - Part 2: Inclined plane test (ISO/DIS 12957-2:1997) |
| prEN ISO 13385-1996 |
產品幾何量技術規范(GPS)尺寸測量?jī)x：卡尺及測深規設計及計量要求 |
Geometrical product specification (GPS) - Dimensional measuring instruments: Callipers and depth gauges - Design and metrological requirements (ISO/DIS 13385:1996) |
| prEN ISO 13426-2-2002 |
土工布及相關產品結構功能強度第2部分：土壤化合物(Geocomposites) |
Geotextiles and geotextile related products - Strength of the structural junctions - Part 2: Geocomposites (ISO/DIS 13426-2:2002) |
| prEN ISO 13438-2002 |
土工布及相關產品在提高氧壓時抗氧化性測定用篩選試驗方法 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation at elevated oxygen pressure (ISO/DIS 13438:2002) |
| prEN ISO 13506-1998 |
耐熱及火焰防護服連體服裝的試驗方法用儀器化人體模型預測燃燒損失 |
Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin (ISO/DIS 13506:1998) |
| prEN ISO 13564-1996 |
測量自行式卡車視野的試驗方法 |
Test method for measuring visibility from self-propelled trucks (ISO/DIS 13564:1996) |
| prEN ISO 13590-2003 |
小艇個人艇建造及系統安裝要求 |
Small craft - Personal watercraft - Construction and system installation requirements (ISO/FDIS 13590:2003) |
| prEN ISO 13707-2000 |
石油和天然氣工業往復式壓縮機 |
Petroleum and natural gas industries - Reciprocating compressors (ISO/FDIS 13707:2000) |
| prEN ISO 13732-3-2002 |
熱環境的人類工效學冷表面的阻觸摩第3部分：人類工效學數據及應用指南 |
Ergonomics of the thermal environment - Touching of cold surfaces - Part 3: Ergonomics data and guidance for application (ISO/DIS 13732-3:2002) |
| prEN ISO 13790-2003 |
建筑物熱性能加熱用能量的計算 |
Thermal performance of buildings - Calculation of energy use for heating (ISO/FDIS 13790:2003) |
| prEN ISO 13791-1995 |
建筑物熱性能無機械冷卻通風時夏季室內溫度一般準則及計算方法 |
Thermal performance of buildings - Internal temperatures in summer of a room without mechanical cooling - General criteria and calculation procedures (ISO/DIS 13791:1995) |
| prEN ISO 13792-1997 |
建筑物熱性能無機械冷卻通風時夏季室內溫度簡化計算方法的一般準則 |
Thermal performance of buildings - Internal temperatures of a room in summer without mechanical cooling - General criteria for a simplified calculation method (ISO/DIS 13792:1997) |
| prEN ISO 13903-1999 |
動物飼料氨基酸含量的測定離子交換色譜法 |
Animal feeding stuffs - Determination of amino acids content - Ion-exchanging chromatographic method (ISO/DIS 13903:1999) |
| prEN ISO 13936-1-2002 |
紡織品機織物接縫處紗缐防滑力的測定第1部分：固定縫開口法 |
Textiles - Determination of slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method (ISO/DIS 13936-1:2002) |
| prEN ISO 13936-2-2002 |
紡織品機織物接縫處紗缐防滑力的測定第2部分：固定荷載法 |
Textiles - Determination of slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method (ISO/DIS 13936-2:2002) |
| prEN ISO 13969-2003 |
乳和乳制品微生物抑制劑試驗的標準化描述指南 |
Milk and milk products - Guidelines for a standardized description of microbial inhibitor tests (ISO/FDIS 13969:2003) |
| prEN ISO 13982-1-2000 |
防粒狀化學品用防護服第1部分：提供全身防粒狀化學品的化學防護服的性能的要求(5型防護服) |
Protective clothing for use against solid particulate chemicals - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against solid particulate chemicals (type 5 clothing) (ISO/DIS 13982-1:2000) |
| prEN ISO 13982-2-1999 |
防粒狀化學品用防護服第2部分：懸浮細微粒向服裝內滲透性的測試方法 |
Protective clothing for use against solid particulate chemicals - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO/DIS 13982-2:1999) |
| prEN ISO 14122-4-2002 |
機器安全接近機器的固定方式第4部分：固定梯子 |
Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO/FDIS 14122-4:2002) |
| prEN ISO 14172-2003 |
焊接消耗材料鎳及鎳合金手工金屬電弧焊用涂劑焊條分類 |
Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO/FDIS 14172:2003) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com