標準號 |
中文名稱 |
英文名稱 |
| ISO 7388-1 ADD 1-1984 |
自動工具轉換器用帶7/24錐銷的工具柄.柄號40、45和50.尺寸.修改1 |
(Tool shanks with 7/24 taper for automatic tool changers; shanks nos. 40, 45 and 50; dimensions; addendum 1) |
| ISO 7388-1-1983 |
自動刀具更換器的7/24錐度刀柄.第1部分:刀柄型號40,45和50.尺寸 |
(Tool shanks with 7/24 taper for automatic tool changers; Part 1 : Shanks Nos. 40, 45 and 50; Dimensions) |
| ISO 7388-2-1984 |
自動刀具更換器的7/24錐度刀柄.第2部分:40,45和50號刀柄的緊固鈕.尺寸和機械特性 |
(Tool shanks with 7/24 taper for automatic tool changers; Part 2 : Retention knobs for shanks Nos. 40, 45 and 50; Dimensions and mechanical characteristics) |
| ISO 7389-2002 |
房屋建筑.連接件.密封膠回彈性的測定 |
(Building construction - Jointing products - Determination of elastic recovery of sealants) |
| ISO 7390-2002 |
房屋建筑.連接件.密封膠流動阻力的測定 |
(Building construction - Jointing products - Determination of resistance to flow of sealants) |
| ISO 7391-1-1996 |
塑料.聚碳酸酯模塑和擠塑材料.第1部分:命名體制和基本 |
(Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications) |
| ISO 7391-2-1996 |
塑料.聚碳酸酯模塑和擠塑材料.第2部分:試樣制備和特性測定 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
| ISO 7393-1 Technical Corrigendum 1-2001 |
水質.游離氯和總氯的測定.第1部分:使用N,N-二乙基-1,4-苯二胺的滴定法.技術勘誤1 |
Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamine; Technical Corrigendum 1 |
| ISO 7393-1-1985 |
水質.游離氯和氯的總含量測定.第1部分:利用N,N-二乙基-1,4-苯二胺的滴定法 |
Water quality; Determination of free chlorine and total chlorine; Part 1 : Titrimetric method using N,N-diethyl-1,4-phenylenediamine |
| ISO 7393-2-1985 |
水質.游離氯和氯的總含量測定.第2部分:為常規檢驗?zāi)康氖褂玫腘,N-二乙基-1,4-苯二胺比色法 |
Water quality; Determination of free chlorine and total chlorine; Part 2 : Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine control purposes |
| ISO 7393-3-1990 |
水質.游離氯和氯的總含量測定.第3部分:測定氯總含量的碘量滴定法 |
Water quality; determination of free chlorine and total chlorine; part 3: iodometric titration method for the determination of total chlorine |
| ISO 7396-1-2002 |
醫用燃?xì)夤艿老到y(tǒng).第1部分:醫用壓縮氣體和真空管道 |
Medical gas pipeline systems - Part 1: Pipelines for compressed medical gases and vacuum |
| ISO 7396-2-2000 |
醫用氣體導管系統.第2部分:麻醉氣體清除系統 |
Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems |
| ISO 7397-1-1993 |
客車.司機直接視野的驗證.第1部分:車輛靜態測量定位 |
Passenger cars; verification of driver`s direct field of view; part 1: vehicle positioning for static measurement |
| ISO 7397-2-1993 |
客車.司機直接視野的驗證.第2部分:試驗方法 |
Passenger cars; verification of driver`s direct field of view; part 2: test method |
| ISO 7398-1990 |
摩托車.直流閃光裝置 |
Motorcycles; direct current flasher units |
| ISO 7399-1990 |
摩托車.交流閃光裝置 |
Motorcycles; alternating current flasher units |
| ISO 74-1976 |
電影技術.在8mmR型電影膠片上由攝影片窗所形成的影象和可放映的最大影象.位置和尺寸 |
Cinematography; Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film; Positions and dimensions |
| ISO 740-1976 |
工業用碳酸鈉.總可溶性堿度的測定.滴定法 |
Sodium carbonate for industrial use; Determination of total soluble alkalinity; Titrimetric method |
| ISO 7400-1990 |
輕便摩托車.交流閃光裝置 |
Mopeds; alternating current flasher units |
| ISO 7401-2003 |
道路車輛.橫向瞬態響應的試驗方法.開路試驗方法 |
Road vehicles - Lateral transient response tests methods - Open-loop test methods |
| ISO 7401-2003 |
道路車輛.橫向瞬態響應的試驗方法.開路試驗方法 |
|
| ISO 7402-1993 |
微生物學.未復活腸桿菌計數通用指南.MPN技術和計群技術 |
Microbiology; general guidance for the enumeration of Enterobacteriaceae without resuscitation; MPN technique and colony-count technique |
| ISO 7403-1998 |
航空航天.花鍵傳動.板手形狀.米制系列 |
Aerospace - Spline drives - Wrenching configuration - Metric series |
| ISO 7404-1-1994 |
煙煤和無煙煤的巖相分析法.第1部分:詞匯 |
Methods for the petrographic analysis of bituminous coal and anthracite - Part 1: Vocabulary |
| ISO 7404-2-1985 |
煙煤和無煙煤的巖相分析法.第2部分:煤的試樣制備法 |
Methods for the petrographic analysis of bituminous coal and anthracite; Part 2 : Method of preparing coal samples |
| ISO 7404-3-1994 |
煙煤和無煙煤的巖相分析法.第3部分:煤素質組成的測定方法 |
Methods for the petrographic analysis of bituminous coal and anthracite - Part 3: Method of determining maceral group composition |
| ISO 7404-4-1988 |
煙煤和無煙煤的巖相分析法.第4部分:測定煤巖顯微類型、碳礦石及礦石組成的方法 |
Methods for the petrographic analysis of bituminous coal and anthracite; part 4: method of determining microlithotype, carbominerite and minerite composition |
| ISO 7404-5-1994 |
煙煤和無煙煤的巖相分析法.第5部分:鏡煤素質反射的顯微測定方法 |
Methods for the petrographic analysis of bituminous coal and anthracite - Part 5: Method of determining microscopically the reflectance of vitrinite |
| ISO 7405-1997 |
牙科學.牙科醫療設備生物分解性的疾病前評定.牙科材料的試驗方法 |
Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials |
| ISO 7407-1983 |
肥料.酸可溶性鉀含量的測定.試驗溶液的制備 |
Fertilizers; Determination of acid-soluble potassium content; Preparation of the test solution |
| ISO 7408-1983 |
肥料.用氫氧化鈉處理時,有釋放氨的其他物質存在的情況下氨型氮含量的測定.滴定法 |
Fertilizers; Determination of ammoniacal nitrogen content in the presence of other substances which release ammonia when treated with sodium hydroxide; Titrimetric method |
| ISO 7409-1984 |
肥料.標志.格式和說明 |
Fertilizers; Marking; Presentation and declarations |
| ISO 7410-1983 |
肥料和土壤改良劑.最終樣品.實用準備方案 |
Fertilizers and soil conditioners; Final samples; Practical arrangements |
| ISO 7411-1984 |
高強度結構栓接用寬對邊六角螺母(符合 ISO 888螺紋長度).產品等級C.性能類別8.8 和10.9 |
Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888); Product grade C; Property classes 8.8 and 10.9 |
| ISO 7412-1984 |
高強度結構栓接用寬對邊六角螺母(短螺紋).產品等級C.性能類別8.8 和10.9 |
Hexagon bolts for high-strength structural bolting with large width across flats (short thread length); Product grade C; Property classes 8.8 and 10.9 |
| ISO 7413-1984 |
熱鍍鋅1 型(超尺寸攻絲)結構栓接用六角螺母.產品等級A 和B.性能類別5,6 和8 |
Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped); Product grades A and B; Property classes 5, 6 and 8 |
| ISO 7414-1984 |
1 型大寬對邊結構栓接用寬對邊六角螺母.產品等級B.性能類別10 |
Hexagon nuts for structural bolting with large width across flats, style 1; Product grade B; Property class 10 |
| ISO 7415-1984 |
淬硬和回火的高強度結構栓接用平墊圈 |
Plain washers for high-strength structural bolting, hardened and tempered |
| ISO 7416-1984 |
高強度結構栓接用淬硬和回火的倒角平墊圈 |
Plain washers, chamfered, hardened and tempered for high-strength structural bolting |
| ISO 7417-1984 |
結構栓接用六角螺母.熱鍍鋅 2型(超尺寸攻絲).產品等級A.性能類別9 |
Hexagon nuts for structural bolting; Style 2, hot-dip galvanized (oversize tapped); Product grade A; Property class 9 |
| ISO 7418-1989 |
旅游居住車.詞匯 |
Leisure accommodation vehicles; vocabulary |
| ISO 7419-1991 |
旅游居住車.通風要求 |
Leisure accommodation vehicles; ventilation requirements |
| ISO 742-1973 |
工業用碳酸鈉.氯化物含量的測定.汞量法 |
Sodium carbonate for industrial use; Determination of chloride content; Mercurimetric method |
| ISO 7420-1987 |
旅居車.燃油的加熱裝置 |
Leisure accommodation vehicles; Oil-fired heating systems |
| ISO 7421-1991 |
娛樂旅居車.液化石油裝置 |
Leisure accomodation vehicles; liquefied petroleum gas systems |
| ISO 7422-1991 |
旅游居住車.敞篷汽車.居住要求 |
Leisure accommodation vehicles; caravans; habitation requirements |
| ISO 7425-1-1988 |
液壓傳動.彈性體塑料表面密封件的腔.尺寸和公差.第1部分:活塞密封腔 |
Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 1: piston seal housings |
| ISO 7425-2-1989 |
液壓傳動.彈性體塑料表面密封件的腔.尺寸和公差.第2部分:活塞桿密封腔 |
Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 2: rod seal housings |
| ISO 7432-2002 |
玻璃纖維增強熱固性塑料管道和管配件.檢驗設計帶彈性體密封件的鎖緊套筒連接件,包括雙插孔連接件的試驗方法 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals |
| ISO 7434-1983 |
一字槽錐端緊定螺釘 |
Slotted set screws with cone point |
| ISO 7435-1983 |
一字槽長圓柱端緊定螺釘 |
Slotted set screws with long dog point |
| ISO 7436-1983 |
一字槽凹端緊定螺釘 |
Slotted set screws with cup point |
| ISO 7437-1990 |
技術制圖.建筑制圖.預制結構件的生產圖紙的一般規則 |
Technical drawings; construction drawings; general rules for execution of production drawings for prefabricated structural components |
| ISO 7438-1985 |
金屬材料.彎曲試驗 |
Metallic materials; Bend test |
| ISO 7439-2002 |
含銅的宮內節育避孕器具.要求、試驗 |
Copper-bearing intra-uterine contraceptive devices - Requirements, tests |
| ISO 7440-1-1991 |
道路車輛.燃油噴射設備試驗.第1部分:標準的噴嘴和支架設備 |
Road vehicles; fuel injection equipment testing; part 1: calibration nozzle and holder assemblies |
| ISO 7440-2-1991 |
道路車輛.燃油噴射設備試驗.第2部分:孔板流量測量 |
Road vehicles; fuel injection equipment testing; part 2 orifice plate flow-measurement |
| ISO 7441-1984 |
金屬和合金的耐腐蝕性.雙金屬在露天暴露腐蝕試驗中腐蝕的測定 |
Corrosion of metals and alloys; Determination of bimetallic corrosion in outdoor exposure corrosion tests |
| ISO 7442-1982 |
輪胎氣門嘴.ISO芯腔NO·1 |
Tyre valves; ISO core chamber No. 1 |
| ISO 745-1976 |
工業用碳酸鈉.在250℃時,質量損失和不揮發物的測定 |
Sodium carbonate for industrial use; Determination of loss of mass and of non-volatile matter at 250 degrees C |
| ISO 7451 Technical Corrigendum 1-1998 |
土方機械.液壓挖掘機挖斗和主裝載機鏟斗的額定容量.技術勘誤1 |
Earth-moving machinery - Volumetric ratings for hydraulic excavator buckets and backhoe loader buckets; Technical Corrigendum 1 |
| ISO 7451-1997 |
土方機械.液壓挖掘機鏟斗和反向鏟裝載鏟斗的額定容積 |
Earth-moving machinery - Volumetric ratings for hydraulic excavator buckets and backhoe loader buckets |
| ISO 7452-2002 |
熱軋結構鋼板.尺寸和形狀公差 |
Hot-rolled structural steel plates - Tolerances on dimensions and shape |
| ISO 7453-1984 |
電影技術.8mmS-11型有聲電影攝影機膠片盒.膠片盒--攝影機接頭和片芯軸驅動裝置,尺寸和規范 |
Cinematography; Sound motion-picture camera cartridge, 8 mm Type S Model II; Cartridge-camera fit and take-up core drive; Dimensions and specifications |
| ISO 7454-1984 |
電影技術.8mm S-11型有聲電影攝影機膠片盒.攝影機膠片的運行長度和片尾缺口.尺寸和規范 |
Cinematography; Sound motion-picture camera cartridge, 8 mm Type S Model Ii; Camera run length and end notches in film; Dimensions and specifications |
| ISO 7455-1984 |
電影技術.8mm S-11型有聲電影攝影機膠片盒.膠片放映速度和狹縫.膠片盒的放映孔和膠片設別孔及彩色平衡濾光孔.尺寸和位置 |
Cinematography; Sound motion-picture camera cartridge, 8 mm Type S Model II; Slots and projection for film speed, cartridge hole and projection for film identification and colour-balancing filter; Dimensions and positions |
| ISO 7456-1984 |
電影技術.8mm S-11型有聲電影攝機膠片盒.裝片位置 |
Cinematography; Sound motion-picture camera cartridge, 8 mm Type S Model II; Film load position |
| ISO 7457-1997 |
土方機械.輪式機械轉彎尺寸的測定 |
Earth-moving machinery - Determination of turning dimensions of wheeled machines |
| ISO 7458-1984 |
玻璃容器.抗內壓性.試驗方法 |
Glass containers; Internal pressure resistance; Test methods |
| ISO 7458-2004 |
玻璃容器.耐內壓力.試驗方法 |
|
| ISO 7459-1984 |
玻璃容器.抗熱沖擊和熱沖擊耐久性.試驗方法 |
Glass containers; Thermal shock resistance and thermal shock endurance; Test methods |
| ISO 7459-2004 |
玻璃容器.抗熱震性和熱震耐久性.試驗方法 |
|
| ISO 746-1976 |
工業用碳酸鈉.在50℃時水不溶物的測定 |
Sodium carbonate for industrial use; Determination of matter insoluble in water at 50 degrees C |
| ISO 7460-1983 |
造船.船體型線.數據的識別 |
Shipbuilding; Shiplines; Identification of geometric data |
| ISO 7461-1984 |
造船.船體型線,船身各單幾何形狀數字表示法 |
Shipbuilding; Shiplines; Numerical representation of elements of the hull geometry |
| ISO 7462-1985 |
造船.船舶的基本尺寸.計算機應用的術語和定義 |
Shipbuilding; Principal ship dimensions; Terminology and definitions for computer applications Bilingual edition |
| ISO 7463-1990 |
造船和海上建筑物.計算機應用符號 |
Shipbuilding and marine structures; symbols for computer applications |
| ISO 7464-1983 |
土方機械.拉桿拉力的測試方法 |
Earth-moving machinery; Method of test for the measurement of drawbar pull |
| ISO 7465-2001 |
乘客電梯和服務電梯.電梯和平衡塊的導軌.T型 |
Passenger lifts and service lifts - Guide rails for lift cars and counterweights - T-type |
| ISO 7466-1986 |
水果、蔬菜制品.5-羥甲基糖醛含量的測定 |
Fruit and vegetable products; Determination of 5-hydroxymethylfurfural (5-HMF) content |
| ISO 7475-2002 |
機械振動.平衡試驗機.計量站用機罩和其他安全措施 |
Mechanical vibration - Balancing machines - Enclosures and other protective measures for the measuring station |
| ISO 7476-1990 |
核純級質量的硝酸雙氧鈾溶液中鈾的測定.重量法 |
Determination of uranium in uranyl nitrate solutions of nuclear grade quality; gravimetric method |
| ISO 7476-2003 |
核燃料技術.核級硝酸鈾酰溶液中鈾的測定.重量法 |
(Nuclear fuel technology - Determination of uranium in uranyl nitrate solutions of nuclear grade quality - Gravimetric method ) |
| ISO 7476-2003 |
核燃料技術.核級硝酸鈾酰溶液中鈾的測定.重量法 |
|
| ISO 7478 Technical Corrigendum 1-1989 |
信息處理系統.數據通信.多鏈路程序.技術勘誤表1 |
Information processing systems; data communication; multilink procedures; technical corrigendum 1 |
| ISO 7478-1987 |
信息處理系統.數據通信.多鏈路過程 |
Information processing systems; Data communication; Multilink procedures |
| ISO 748-1997 |
明渠液體流量測量.速度面積法 |
Measurement of liquid flow in open channels - Velocity-area methods |
| ISO 7481-2000 |
航空航天.螺母.最高工作溫度小于或等于425℃的自鎖螺母.試驗方法 |
Aerospace - Nuts, self-locking, with maximum operating temperature less than or equal to 425 鳦 - Test methods |
| ISO 7482-1-1998 |
山羊原皮.第1部分:缺陷的描述 |
Raw goat skins - Part 1: Descriptions of defects |
| ISO 7482-2-1999 |
山羊原皮.第2部分:根據質量和規格分級的導則 |
Raw goat skins - Part 2: Guidelines for grading on the basis of mass and size |
| ISO 7483 Technical Corrigendum 1-1995 |
符合ISO 7005標準的法蘭密封墊圈的尺寸.技術勘誤表1 |
Dimensions for gaskets for use with flanges to ISO 7005; Technical Corrigendum 1 |
| ISO 7483-1991 |
符合ISO 7005標準的法蘭密封墊圈的尺寸 |
Dimensions of gaskets for use with flanges to ISO 7005 |
| ISO 7485-2000 |
動物飼料.鉀和鈉含量的測定.火焰發射分光光度測定法 |
Animal feeding stuffs - Determination of potassium and sodium contents - Methods using flame-emission spectrometry |
| ISO 7487-2-1985 |
信息處理.以限定的頻率7958次磁通變換/弧度和1.9次變換/mm(48次變換/in)在兩側調制錄制的130mm(5.25in)盒式軟磁盤的數據交換.第2部分:磁道排列格式A |
Information processing; Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides; Part 2 : Track format A |
| ISO 7487-3 Technical Corrigendum 1-1991 |
信息處理.在130mm(5.25in)軟磁盤上利用修正頻率,以7985ftprad,1.9tpmm(48tpi)雙面調制錄制數據交換.第3部分:磁跡格式B.技術勘誤表1 |
Information processing; data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1,9 tpmm (48 tpi), on both sides; part 3: track format B; technical corrigendum 1 |
| ISO 7487-3-1986 |
信息處理.以限定的頻率7958ftprad和1.9tpmm(48次變換/in)在兩側調制錄制的130毫米(5.25in)盒式軟磁盤的數據交換.第3部分:磁道格式B |
Information processing; Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides; Part 3 : Track format B |
| ISO 7488-1991 |
牙科用混汞器 |
Dental amalgamators |
| ISO 749-1977 |
油料種子殘渣.總灰分的測定 |
Oilseed residues; Determination of total ash |
| ISO 7490-2000 |
牙科用石膏粘接鑄造包埋料 |
Dental gypsum-bonded casting investments |
| ISO 7491-2000 |
牙科材料.顏色穩定性的測定 |
Dental materials - Determination of colour stability |
| ISO 7492-1997 |
牙科用探針 |
Dental explorers |
| ISO 7493 Technical Corrigendum 1-1999 |
牙科醫生凳.技術勘誤1 |
Dental operator`s stool; Technical Corrigendum 1 |
| ISO 7493-1997 |
牙科醫生凳 |
Dental operator`s stool |
| ISO 7494-1-2004 |
牙科學.牙科裝置.第1部分:一般要求和試驗方法 |
|
| ISO 7494-2-2003 |
牙科學.牙科綜合治療設備.第2部分:供水和供氣 |
Dentistry - Dental units - Part 2: Water and air supply |
| ISO 7494-2-2003 |
牙科學.牙科綜合治療設備.第2部分:供水和供氣 |
|
| ISO 7495-1990 |
小麥面粉.用機械設備測定濕式谷蛋白的含量 |
Wheat flour; determination of wet gluten content by mechanical means |
| ISO 7497-1984 |
肥料.無機酸可溶性磷酸鹽的萃取 |
Fertilizers; Extraction of phosphates soluble in mineral acids |
| ISO 7498-2-1989 |
信息處理系統.開放系統互連.基本參考模型.第2部分:安全結構 |
Information processing systems; Open Systems Interconnection; basis reference model; Part 2: Security architecture |
| ISO 75-1-1993 |
塑料.載荷下偏轉溫度的測定.第1部分:一般試驗方法 |
Plastics; determination of temperature of deflection under load; part 1: general test method |
| ISO 75-1-2004 |
塑料.載荷下?lián)锨鷾囟鹊臏y定.第1部分:一般試驗方法 |
|
| ISO 75-2-1993 |
塑料.載荷下偏轉溫度的測定.第2部分:塑料和橡木 |
Plastics; determination of temperature of deflection under load; part 2: plastics and ebonite |
| ISO 75-2-2004 |
塑料.載荷下?lián)锨鷾囟鹊臏y定.第2部分:塑料和硬橡膠 |
|
| ISO 75-3-1993 |
塑料.載荷下偏轉溫度的測定.第3部分:高強度熱固性疊層板和長纖維增強塑料 |
Plastics; determination of temperature of deflection under load; part 3: high-strength thermosetting laminates and long-fibre-reinforced plastics |
| ISO 75-3-2004 |
塑料.載荷下?lián)锨鷾囟鹊臏y定.第3部分:高強度熱固性疊層板和長纖維增強塑料 |
|
| ISO 750-1998 |
水果和蔬菜制品.可滴定酸度的測定 |
Fruit and vegetable products - Determination of titratable acidity |
| ISO 7500-1-1999 |
金屬材料.靜態單軸向試驗機的校正.第1部分:拉伸/壓縮試驗機.力測量系統的檢驗和校正 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system |
| ISO 7500-1-2004 |
金屬材料.靜態單軸向試驗機的驗證.第1部分:拉伸/壓縮試驗機.力測量系統的驗證和校正 |
|
| ISO 7500-2-1996 |
金屬材料.靜態單軸向試驗機的校正.第2部分:拉伸蠕變試驗機對作用負載力的校驗 |
Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied load |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com