標準號 |
中文名稱 |
英文名稱 |
| EN ISO 17666-2003 |
航天裝置風險經營 |
Space systems - Risk management (ISO 17666:2003) |
| EN ISO 177-1999 |
塑料增塑劑分散性的測定 |
Plastics - Determination of migration of plasticizers (ISO 177:1988) |
| EN ISO 17708-2003 |
鞋整鞋的試驗方法上鞋底粘附力 |
Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2003) |
| EN ISO 17776-2002 |
石油和天然氣工業海上生產裝置危險識別和風險評定用工具和技術的指南 |
Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment (ISO 17776:2000) |
| EN ISO 178-2003 |
塑料彎曲性能測定 |
Plastics - Determination of flexural properties (ISO 178:2001) |
| EN ISO 17836-2004 |
熱噴涂.熱噴涂熔敷效率的測定 |
|
| EN ISO 179-1-2000 |
塑料擺錘式?jīng)_擊特性的測定第1部分：非儀器沖擊試驗 |
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000) |
| EN ISO 179-2-1999 |
塑料錘式?jīng)_擊特性的測定第2部分：儀器沖擊試驗 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997) |
| EN ISO 1797-2-1995 |
牙科旋轉器械柄第2部分：塑料柄 |
Dental rotary equipment - Shanks - Part 2: Shanks made of plastics (ISO 1797-2:1992) |
| EN ISO 1798-1999 |
軟質泡沫聚合材料拉伸強度和斷裂伸長的測定 |
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:1997) |
| EN ISO 17994-2004 |
水質.微生物方法之間的等效性建立標準 |
|
| EN ISO 180-2000 |
塑料伊兆特沖擊強度的測定 |
Plastics - Determination of Izod impact strength (ISO 180:2000) |
| EN ISO 1806-2002 |
漁網網目斷裂強力的測定 |
Fishing nets - Determination of mesh breaking force of netting (ISO 1806:2002) |
| EN ISO 18153-2003 |
體外診斷醫療裝置生物樣品的定量測量用已知校準器和控制材料確定酶中催化劑濃度值的計量可跟蹤性 |
In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003) |
| EN ISO 182-2-1999 |
塑料基于氯乙烯共聚物、均聚物的化合物及產物在高溫下析出氯化氫和其它酸性產物的趨勢測定第2部分：pH |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO 182-2:1990) |
| EN ISO 182-3-2000 |
塑料基于氯乙烯共聚物、均聚物的化合物及產物在高溫下析出氯化氫和其它酸性產物的趨勢測定第3部分：電 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993) |
| EN ISO 182-4-2000 |
塑料基于氯乙烯共聚物、均聚物的化合物及產物在高溫下析出氯化氫和其它酸性產物的趨勢測定第 4部分：電 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993) |
| EN ISO 18273-2004 |
焊接消耗品.鋁和鋁合金焊接用焊絲電極、焊絲和焊棒.分類 |
|
| EN ISO 18274-2004 |
焊接消耗品.鎳和鎳合金熔焊用實心焊絲、條和棒材.分類 |
|
| EN ISO 18278-1-2004 |
電阻焊.可焊性.第1部分:金屬材料的電阻點焊、縫焊和凸焊的可焊性評定 |
|
| EN ISO 18278-2-2004 |
電阻焊.可焊性.第2部分:點焊用薄鋼板評定用備用程序 |
|
| EN ISO 183-1999 |
塑料著色劑滲析的定性評估 |
Plastics - Qualitative evaluation of the bleeding of colorants (ISO 183:1976) |
| EN ISO 18330-2003 |
乳及乳制品抗生素殘留量檢查用免疫檢驗或受體檢驗的標準化描述指南 |
Milk and milk products - Guidelines for a standardized description of immunoassays or receptor assays for the detection of antimicrobial residues (ISO 18330:2003) |
| EN ISO 18513-2003 |
旅游服務飯店及其他旅游食宿種類術語 |
Tourism services - Hotels and other types of tourism accommodation - Terminology (ISO 18513:2003) |
| EN ISO 1854-1999 |
乳清干酪脂肪含量的測定重量分析法(參照法) |
Whey cheese - Determination of fat content - Gravimetric method (Reference method) (ISO 1854:1999) |
| EN ISO 1856-2000 |
可素纖維素聚合材料壓縮裝置測定 |
Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2000) |
| EN ISO 186-2002 |
紙和紙板測定平均質量的試樣的采取 |
Paper and board - Sampling to determine average quality (ISO 186:2002) |
| EN ISO 18609-2001 |
動物和植物脂肪和油不可皂化物質的測定乙烷提取法 |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using hexane extraction (ISO 18609:2000) |
| EN ISO 18613-2003 |
平木托盤的修理 |
Repair of flat wooden pallets (ISO 18613:2003) |
| EN ISO 1872-2-1997 |
塑料聚乙烯(PE)模塑和擠塑材料第2部分：試樣制備和性能測定 |
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:1997) |
| EN ISO 1873-1-1995 |
塑料聚丙烯(PP)模塑和擠塑材料第1部分：標識系統和基本規范 |
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995) |
| EN ISO 1874-1-2000 |
塑料聚酰胺(PA)模塑和擠塑材料第1部分：命名 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation (ISO 1874-1:1992) |
| EN ISO 1874-2-1995 |
塑料聚酰胺(PA)模塑和擠塑材料第2部分：試樣制備和性能測定 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:1995) |
| EN ISO 18812-2003 |
健康信息學 臨床分析儀與實驗室信息系統之間的接口 使用情形 |
Health informatics - Clinical analyser interfaces to laboratory information systems - Use profiles (ISO 18812:2003) |
| EN ISO 1886-1994 |
增強纖維適用于接收批料的抽樣方案 |
Reinforcement fibres - Sampling plans applicable to received batches (ISO 1886:1990) |
| EN ISO 1889-1997 |
增強紗線密度的測定 |
Reinforcement yarns - Determination of linear density (ISO 1889:1997) |
| EN ISO 1890-1997 |
增強紗捻度的測定 |
Reinforcement yarns - Determination of twist (ISO 1890:1997) |
| EN ISO 19011-2002 |
質量和/或環境管理體系審核指南 |
Guidelines for quality and/or environmental management systems auditing (ISO 19011:2002) |
| EN ISO 1923-1995 |
泡沫塑料和橡膠線性尺寸的測定 |
Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981) |
| EN ISO 1924-2-1995 |
紙和紙板拉伸性能的測定第2部分：恒速拉伸法 |
Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (ISO 1924-2:1994) |
| EN ISO 1942-5-1994 |
牙醫詞匯第5部分：與測試有關的術語 |
Dental vocabulary - Part 5: Terms associated with testing (ISO 1942-5:1989) |
| EN ISO 196-1995 |
鍛銅和銅合金殘余應力的檢測硝酸亞汞試驗 |
Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test (ISO 196:1978) |
| EN ISO 1969-2004 |
纖維繩索.聚乙烯繩索.3和4股繩索 |
|
| EN ISO 1973-1995 |
紡織纖維線密度的測定稱重和振動法 |
Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:1995) |
| EN ISO 19900-2002 |
石油和天然氣工業海上結構的一般要求 |
Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2002) |
| EN ISO 19901-4-2003 |
石油和天然氣工業海上結構的特殊要求 第4部分：土工技術和基礎設計的考慮內容 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2003) |
| EN ISO 19901-5-2003 |
石油和天然氣工業海上結構的特殊要求 第5部分：設計和施工中的重量控制 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2003) |
| EN ISO 19953-2004 |
鞋靴.鞋跟的試驗方法.耐側面沖擊 |
|
| EN ISO 19954-2003 |
鞋整鞋的試驗方法在家用洗衣機中的可洗性 |
Footwear - Test methods for whole shoe - Washability in a domestic washing machine (ISO 19954:2003) |
| EN ISO 19956-2004 |
鞋靴.鞋跟的試驗方法.耐疲勞性 |
|
| EN ISO 19957-2004 |
鞋靴.鞋跟的試驗方法.鞋跟釘?shù)谋３至?/td>
| |
| EN ISO 19958-2004 |
鞋靴.鞋跟和頂部的試驗方法.頂部保持力 |
|
| EN ISO 2009-1994 |
開槽沉頭螺釘(通用頭型)產品等級A |
Slotted countersunk flat head screws (common head style) - Product grade A (ISO 2009:1994) |
| EN ISO 2010-1994 |
開槽半沉頭螺釘(通用頭型)產品等級A |
Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994) |
| EN ISO 20344-2004 |
個人防護設備.鞋靴的試驗方法 |
|
| EN ISO 20345-2004 |
個人防護設備.安全鞋靴 |
|
| EN ISO 20346-2004 |
個人防護設備.防護鞋 |
|
| EN ISO 20347-2004 |
個人防護設備.專業鞋 |
|
| EN ISO 2039-1-2003 |
塑料硬度測定第1部分：壓球法 |
Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001) |
| EN ISO 2039-2-1999 |
塑料硬度測定第2部分：洛氏硬度 |
Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987) |
| EN ISO 20482-2003 |
金屬材料板材及帶材伊利森(Erichsen)壓杯試驗 |
Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2003) |
| EN ISO 2060-1995 |
紡織品卷裝紗用絞紗法測定線密度(單位長度的質量) |
Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method (ISO 2060:1994) |
| EN ISO 2061-1995 |
紡織品紗線捻度的測定直接計數法 |
Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:1995) |
| EN ISO 2062-1995 |
紡織品從包裝抽取紗線單端斷裂力和斷裂伸長的測定 |
Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break (ISO 2062:1993) |
| EN ISO 2064-2000 |
金屬和其他無機覆蓋層厚度測量的定義和一般要求 |
Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| EN ISO 20645-2004 |
紡織織物.抗菌活性的測定.瓊脂擴散木片試驗 |
|
| EN ISO 20763-2004 |
石油和相關產品.液壓液耐磨性能的測定.葉片泵法 |
|
| EN ISO 20823-2003 |
石油和石油產品 與熱表面接觸時流體的易燃特性的測定 多種形式的點燃試驗 |
Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surface (ISO 20823-2003) |
| EN ISO 20843-2003 |
石油及石油產品HFA(六氟丙酮)HFAS和HFC流體中阻燃液PH值的測定 |
Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2003) |
| EN ISO 20844-2004 |
石油及其相關產品.利用柴油噴射器嘴測定含聚合物油的剪切穩定性 |
|
| EN ISO 20846-2004 |
石油產品.機動車燃料中硫含量的測定.紫外線熒光法 |
|
| EN ISO 20847-2004 |
石油產品.機動車燃料中硫含量的測定.能量分散X射線熒光光譜法 |
|
| EN ISO 20884-2004 |
石油產品.機動車燃料中硫含量的測定.波長分散X射線熒光光譜法 |
|
| EN ISO 21049-2004 |
泵.離心和旋轉泵用軸密封系統 |
|
| EN ISO 2114-2000 |
塑料（聚酯樹脂）、色漆和清漆（膠粘合劑）部分酸值和總酸值的測定 |
Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000) |
| EN ISO 21227-1-2003 |
油漆和清漆用光學成像法評價涂漆表面的缺陷第1部分：一般指南 |
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003) |
| EN ISO 21269-2004 |
帶米制精細齒距螺紋的六角凹頭螺釘 |
|
| EN ISO 21329-2004 |
石油和天然氣工業.管道運輸系統.機械連接器的試驗過程 |
|
| EN ISO 2151-2004 |
聲學.壓縮機和真空泵用噪音試驗規程.工程法(2級) |
|
| EN ISO 21530-2004 |
牙科學.牙科器械表面用材料.耐化學消毒劑的測定 |
|
| EN ISO 21533-2003 |
牙科學可反復使用的牙韌帶注射 器 |
Dentistry - Reusable cartridge syringes intended for intraligamentary injections (ISO 21533:2003) |
| EN ISO 21549-1-2004 |
醫療信息學.病人健康卡數據.第1部分:通用結構 |
|
| EN ISO 21549-2-2004 |
醫療信息學.病人健康卡數據.第2部分:通用對象 |
|
| EN ISO 21549-3-2004 |
醫療信息學.病人健康卡數據.第3部分:受限的臨床數據 |
|
| EN ISO 21567-2004 |
食品和動物飼料的微生物學.志賀氏桿菌檢測的水平法 |
|
| EN ISO 2157-1995 |
牙科旋轉器械公稱直徑和命名代碼 |
Dental rotary instruments - Nominal diameters and designation code number (ISO 2157:1992) |
| EN ISO 21572-2004 |
食品.轉基因有機物和衍生產品的檢測方法.基于蛋白質的方法 |
|
| EN ISO 216-2001 |
書寫紙和某些印刷紙裁切后尺寸A和B系列 |
Writing paper and certain classes of printed matter - Trimmed sizes - A and B series (ISO 216:1975) |
| EN ISO 2160-1998 |
石油產品對銅的腐蝕性銅片腐蝕試驗 |
Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998) |
| EN ISO 2162-1-1996 |
技術產品文件彈簧第1部分：簡化表示法 |
Technical product documentation - Springs - Part 1: Simplified representation (ISO 2162-1:1993) |
| EN ISO 2162-2-1996 |
技術產品文件彈簧第2部分：圓柱螺旋形壓力彈簧數據的表示 |
Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs (ISO 2162-2:1993) |
| EN ISO 2162-3-1996 |
技術產品文件彈簧第3部分：詞匯 |
Technical product documentation - Springs - Part 3: Vocabulary (ISO 2162-3:1993) |
| EN ISO 21647-2004 |
醫用電氣設備.呼吸氣監測器的基本安全和性能的特殊要求 |
|
| EN ISO 21670-2003 |
帶凸緣的六角焊接螺母 |
Hexagon weld nuts with flange (ISO 21670:2003) |
| EN ISO 2177-1994 |
金屬覆蓋層覆蓋層厚度測量陽極溶解庫侖法 |
Metallic coatings - Measurement of coating thickness - Coulometer method by anodic dissolution (ISO 2177:1985) |
| EN ISO 2177-2004 |
金屬鍍層.鍍層厚度的測量.陽極分解的電量計法 |
|
| EN ISO 2178-1995 |
磁性機體上的非磁性覆蓋層覆蓋層厚度的測量磁性法 |
Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:1982) |
| EN ISO 2203-1997 |
技術制圖齒輪的習慣畫法 |
Technical drawings - Conventional representation of gears (ISO 2203:1973) |
| EN ISO 2231-1995 |
橡膠或塑料涂覆織物狀態調節和試驗的標準環境 |
Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing (ISO 2231:1989) |
| EN ISO 2233-2001 |
包裝滿裝的運輸包裝和單貨物試驗條件 |
Packaging - Complete, filled transport packages and unit loads - Conditioning for testing (ISO 2233:2000) |
| EN ISO 2234-2002 |
包裝 滿裝運輸包裝和單件貨物 靜載荷法堆積試驗 |
Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load (ISO 2234:2000) |
| EN ISO 2244-2002 |
包裝 滿裝運輸包裝和單件貨物 水平?jīng)_擊試驗 |
Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000) |
| EN ISO 2247-2002 |
包裝 滿裝運輸包裝和單件貨物 固定低頻振動試驗 |
Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency (ISO 2247:2000) |
| EN ISO 228-1-2003 |
非螺紋密封的管螺紋第1部分：標記、尺寸和公差 |
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN ISO 228-2-2003 |
非螺紋密封的管螺紋第2部分：用極限量規檢驗 |
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987) |
| EN ISO 2286-1-1998 |
橡膠或塑料涂覆織物整卷特性測定第1部分：長度、寬度和凈重的測定方法 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:1998) |
| EN ISO 2286-2-1998 |
橡膠或塑料涂覆織物整卷特性測定第2部分：單位面積總質量、單位面積涂膠量和襯底單位面積質量的測定方 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998) |
| EN ISO 2286-3-1998 |
橡膠或塑料涂覆織物整卷特性測定第3部分：厚度測定方法 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998) |
| EN ISO 2320-1997 |
有效力矩型鋼六角鎖緊螺母機械和工作性能 |
Prevailing torque type steel hexagon nuts - Mechanical and performance requirements (ISO 2320:1997) |
| EN ISO 2338-1997 |
不淬硬鋼和奧氏體不銹鋼圓錐銷 |
Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997) |
| EN ISO 23429-2004 |
六角凹頭量規 |
|
| EN ISO 2360-1995 |
非磁性基金屬上非導電涂層鍍層厚度的測量渦流法 |
Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method (ISO 2360:1982) |
| EN ISO 2361-1995 |
磁性和非磁性基體上的鎳電度層鍍層厚度的測量磁性法 |
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:1982) |
| EN ISO 2398-1997 |
織物增強的壓縮空氣用橡膠軟管規范 |
Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995) |
| EN ISO 2409-1994 |
色漆和清漆劃格試驗 |
Paints and varnishes - Cross-cut test (ISO 2409:1992) |
| EN ISO 2411-2000 |
橡膠或塑料涂覆織物涂層粘合強度的測定 |
Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000) |
| EN ISO 2417-2002 |
皮革物理與機械性的試驗靜態吸水性的測定 |
Leather - Physical and mechanical tests - Determination of the static absorption of water (ISO 2417:2002) |
| EN ISO 2418-2002 |
皮革化學、物理和機械性與色牢度的測試取樣部位 |
Leather - Chemical, physical and mechanical and fastness tests - Sampling location (ISO 2418:2002) |
| EN ISO 2419-2002 |
皮革物理與機械性的試驗樣品準備和調節 |
Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2002) |
| EN ISO 2420-2002 |
皮革物理與機械性的試驗視密度的測定 |
Leather - Physical and mechanical tests - Determination of apparent density (ISO 2420:2002) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com