標準號 |
中文名稱 |
英文名稱 |
| EN ISO 9771-1997 |
塑料酚醛樹脂在酸性條件處理時液體酚醛樹脂假絕熱溫升的測定 |
Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995) |
| EN ISO 9785-2002 |
造船技術可行駛內燃機車輛的貨艙的通風氣流總需量的理論計算 |
Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines may be driven - Calculation of theoretical total airflow required (ISO 9785:2002) |
| EN ISO 9787-1999 |
操作型工業機器人坐標系和運動術語 |
Manipulating industrial robots - Coordinate systems and motion nomenclatures (ISO 9787:1999) |
| EN ISO 9801-1999 |
眼科儀器測試箱鏡頭 |
Ophthalmic instruments - Trial case lenses (ISO 9801:1997) |
| EN ISO 9832-2003 |
動植物脂肪和油脂工業乙烷殘留量的測定 |
Animal and vegetable fats and oils - Determination of residual technical hexane content (ISO 9832:2002) |
| EN ISO 9856-1995 |
輸送帶彈性模量的測定 |
Conveyor belts - Determination of elastic modulus (ISO 9856:1989) |
| EN ISO 9863-2-1996 |
土工布及相關產品特定壓力下厚度的測定第2部分：多層制品中單層厚度測定程序 |
Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 2: Procedure for determination of thickness of single layers of multilayer products (ISO 9863-2:1996) |
| EN ISO 9875-2001 |
船舶與海上技術海上回聲設備 |
Ships and marine technology - Marine echo-sounding equipment (ISO 9875:2000) |
| EN ISO 9876-1998 |
船舶與海上技術船用氣象圖傳真接收機 |
Ships and marine technology - Marine facsimile receivers for meteorological charts (ISO 9876:1997) |
| EN ISO 9886-2001 |
熱疲勞的生理學測量評價 |
Evaluation of thermal strain by physiological measurements (ISO 9886:1992) |
| EN ISO 9886-2004 |
人類工效學.熱疲勞的生理學測量評價 |
|
| EN ISO 9887-1994 |
水質水介質中有機化合物有氧生物降解能力的評價半連續活性污泥法(SCAS) |
Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Semi-continuous activated sludge method (SCAS) (ISO 9887:1992) |
| EN ISO 9888-1999 |
水質水介質中有機化合物最終有氧生物降解能力的評價靜態試驗(察恩沃依恩斯方法) |
Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Static test (Zahn-Wellens method) (ISO 9888:1999) |
| EN ISO 9902-1-2001 |
紡織機械噪聲試驗規范第1部分：通用要求 |
Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001) |
| EN ISO 9902-2-2001 |
紡織機械噪聲試驗規范第2部分：紡紗準備機和紡紗機械 |
Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001) |
| EN ISO 9902-3-2001 |
紡織機械噪聲試驗規范第3部分：無紡機械 |
Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001) |
| EN ISO 9902-4-2001 |
紡織機械噪聲試驗規范第4部分：紗線加工機和制繩機 |
Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-3:2001) |
| EN ISO 9902-5-2001 |
紡織機械噪聲試驗規范第5部分：編織和針織準備機 |
Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001) |
| EN ISO 9902-6-2001 |
紡織機械噪聲試驗規范第6部分：織物制造機 |
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001) |
| EN ISO 9902-7-2001 |
紡織機械噪聲試驗規范第7部分：印染機及精整機 |
Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001) |
| EN ISO 9905-1997 |
離心泵技術條件I類 |
Technical specifications for centrifugal pumps - Class I (ISO 9905:1994) |
| EN ISO 9906-1999 |
回轉動力泵液壓性能驗收試驗等級1和2 |
Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 (ISO 9906:1999) |
| EN ISO 9908-1997 |
離心泵技術條件III類 |
Technical specifications for centrifugal pumps - Class III (ISO 9908:1993) |
| EN ISO 9913-1-1998 |
光學和光學儀器隱形眼鏡第1部分：用FATT法對氧滲透性和可透性的測定 |
Optics and optical instruments - Contact lenses - Part 1: Determination of oxygen permeability and transmissibility by the FATT method (ISO 9913-1:1996) |
| EN ISO 9914-1996 |
光學和光學儀器隱形眼鏡隱形眼鏡材料折射指數的測定 |
Optics and optical instruments - Contact lenses - Determination of refractive index of contact lens materials (ISO 9914:1995) |
| EN ISO 9917-2-1999 |
牙科用水基膠粘劑第2部分：光固化膠粘劑 |
Dental water-based cements - Part 2: Light-activated cements (ISO 9917-2:1998) |
| EN ISO 9920-2003 |
熱環境的人類工效學 連體衣隔熱性和抗蒸發性評定 |
Ergonomics of the thermal environment - Estimation of the thermal insulation and evaporative resistance of a clothing ensemble (ISO 9920:1995) |
| EN ISO 9934-1-2001 |
無損檢驗磁粉檢驗第1部分：一般原則 |
Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2001) |
| EN ISO 9934-2-2002 |
無損檢驗磁粉檢驗第2部分：檢查介質 |
Non destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2002) |
| EN ISO 9934-3-2002 |
無損檢驗磁粉檢驗第3部分：設備 |
Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2002) |
| EN ISO 9944-1995 |
塑料酚醛樹脂樹脂萃取物電導率的測定 |
Plastics - Phenolic resins - Determination of electrical conductivity of resin extracts (ISO 9944:1990) |
| EN ISO 9946-1999 |
操作型工業機器人特性表示 |
Manipulating industrial robots - Presentation of characteristics (ISO 9946:1999) |
| EN ISO 9956-10-1996 |
金屬材料焊接工藝規程及認可第10部分：電子束焊接工藝規程 |
Specification and approval of welding procedures for metallic materials - Part 10: Welding procedure specification for electron beam welding (ISO 9956-10:1996) |
| EN ISO 9956-11-1996 |
金屬材料焊接工藝規程及認可第11部分：激光束焊接工藝規程 |
Specification and approval of welding procedures for metallic materials - Part 11: Welding procedure specification for laser beam welding (ISO 9956-11:1996) |
| EN ISO 9963-1-1995 |
水質堿度的測定第1部分：總堿度和合成堿度的測定 |
Water quality - Determination of alkalinity - Part 1: Determination of total and composite alkalinity (ISO 9963-1:1994) |
| EN ISO 9963-2-1995 |
水質堿度的測定第2部分：碳酸鹽堿度的測定 |
Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity (ISO 9963-2:1994) |
| EN ISO 9967-1995 |
塑料管蠕變系數的測定 |
Plastics pipes - Determination of creep ratio (ISO 9967:1994) |
| EN ISO 9969-1995 |
熱塑性塑料管環型硬度的測定 |
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:1994) |
| EN ISO 9974-1-2000 |
通用和液壓傳動用聯接件帶ISO 261 彈性螺紋或金屬金屬密封的氣門和雙頭螺栓端頭第1部分：螺紋氣門 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996) |
| EN ISO 9974-2-2000 |
通用和液壓傳動用聯接件帶ISO 261 彈性螺紋或金屬金屬密封的氣門和雙頭螺栓端頭第2部分：彈性密封的 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996) |
| EN ISO 9974-3-2000 |
通用和液壓傳動用聯接件帶ISO 261 彈性螺紋或金屬金屬密封的氣門和雙頭螺栓端頭第3部分：金屬金屬 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996) |
| EN ISO 9994-2002 |
打火機安全規范 |
Lighters - Safety specification (ISO 9994:2002) |
| EN ISO 9997-1999 |
牙科卡式注射器 |
Dental cartridge syringes (ISO 9997:1999) |
| EN ISO 9999-2002 |
殘疾人專用裝備分類 |
Technical aids for persons with disabilities - Classification and terminology (ISO 9999:2002) |
| EN ISO/IEC 11172-4-1996 |
信息技術具有1、5Mbit/s的數字存儲媒體運動圖像及其伴音的編碼第4部分：一致性測試 |
Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 4: Compliance testing (ISO/IEC 11172-4:1995) |
| EN ISO/IEC 11544-1995 |
信息技術圖片和聲音信息的編碼表示遞增二值圖像壓縮 |
Information technology - Coded representation of picture and audio information - Progressive bi-level image compression (ISO/IEC 11544:1993) |
| EN ISO/IEC 13818-1-1997 |
信息技術運動圖像及其伴音信息的通用編碼第1部分：系統 |
Information technology - Generic coding of moving pictures and associated audio information - Part 1: Systems (ISO/IEC 13818-1:1996) |
| EN ISO/IEC 13818-9-2000 |
信息技術運動圖像及其伴音信息的通用編碼第9部分：系統解碼器的實時接口擴展 |
Information technology - Generic coding of moving pictures and associated audio information - Part 9: Extension for real time interface for systems decoders (ISO/IEC 13818-9:1996) |
| EN ISO/IEC 15416-2001 |
信息技術自動識別和數據收集技術條形碼打印質量測試規范線型符號 |
Information technology - Automatic identification and data capture techniques - Bar code print quality test specification; Linear symbols (ISO/IEC 15416:2000) |
| EN ISO/IEC 15419-2002 |
信息技術自動識別和數據收集技術條形碼數字成像及印刷性能試驗 |
Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing (ISO/IEC 15419:2001) |
| EN ISO/IEC 15421-2001 |
信息技術自動識別和數據收集技術條形碼主要測試規范 |
Information technology - Automatic identification and data capture techniques - Bar code master test specifications (ISO/IEC 15421:2000) |
| EN ISO/IEC 15438-2003 |
信息技術 自動識別和數據收集技術 條碼符號規范 PDF417 |
Information technology - Automatic identification and data capture techniques - Bar code symbology specifications; PDF417 (ISO/IEC 15438:2001) |
| EN ISO/IEC 17011-2004 |
合格評定.認可合格評定機構的認可組織的一般要求 |
|
| EN ISO/IEC 17020-2004 |
各類檢查機構運行的一般準則 |
|
| EN ISO/IEC 17024-2003 |
一致性評定 認證機構作業人員認證的通用準則 |
Conformity assessment - General requirements for bodies operating certification for persons (ISO/IEC 17024:2003) |
| EN ISO/IEC 17025-2000 |
檢測和校準實驗室能力的一般要求 |
General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:1999) |
| EN ISO/IEC 17050-1-2004 |
合格評定.供貨商的合格聲明.第1部分:一般要求 |
|
| EN ISO/IEC 17050-2-2004 |
合格評定.供貨商的合格聲明.第2部分:配套文獻 |
|
| EN ISO/IEC 7810-1996 |
識別卡物理特性 |
Identification cards - Physical characteristics (ISO/IEC 7810:1995) |
| EN ISO/IEC 7811-1-1996 |
識別卡記錄技術第1部分：凸印 |
Identification cards - Recording technique - Part 1: Embossing (ISO/IEC 7811-1:1995) |
| EN ISO/IEC 7811-2-1996 |
識別卡記錄技術第2部分：磁條 |
Identification cards - Recording technique - Part 2: Magnetic stripe (ISO/IEC 7811-2:1995) |
| EN ISO/IEC 7811-3-1996 |
識別卡記錄技術第3部分：在ID-1卡上凸印字符定位 |
Identification cards - Recording technique - Part 3: Location of embossed characters on ID-1 cards (ISO/IEC 7811-3:1995) |
| EN ISO/IEC 7811-4-1996 |
識別卡記錄技術第4部分：只讀磁道定位磁道1和2 |
Identification cards - Recording technique - Part 4: Location of read-only magnetic tracks - Tracks 1 and 2 (ISO/IEC 7811-4:1995) |
| EN ISO/IEC 7811-5-1996 |
識別卡記錄技術第5部分：只讀磁道定位磁道3 |
Identification cards - Recording technique - Part 5: Location of read-write magnetic track - Tracks 3 (ISO/IEC 7811-5:1995) |
| EN ISO/IEC 7812-1-1995 |
識別卡發行者標識第1部分：標準號系統 |
Identification cards - Identification of issuers - Part 1: Numbering system (ISO/IEC 7812-1-1993) |
| EN ISO/IEC 7812-2-1995 |
識別卡發行者標識第2部分：申請和登記規程 |
Identification cards - Identification of issuers - Part 2: Application and registration procedures (ISO/IEC 7812-2:1993) |
| ENV ISO 10722-1-1998 |
土工布及相關產品安裝過程中的模擬損害程序第1部分：粒狀材料的安裝 |
Geotextiles and geotextile-related products - Procedure for simulating damage during installation - Part 1: Installation in granular materials (ISO 10722-1:1998) |
| ENV ISO 11079-1998 |
冷環境評價必備隔熱服裝(IREQ)的測定 |
Evaluation of cold environments - Determination of required clothing insulation (IREQ) (ISO/TR 11079:1993) |
| ENV ISO 11133-1-2000 |
食品和動物飼料的微生物學培養基制備和生產指南第1部分：實驗室培養基制備的質量保證通用指南 |
Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory (ISO/TS 11133-1:2000) |
| ENV ISO 13438-1999 |
土工布及相關產品抗氧化性測定用篩選試驗方法 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO/TR 13438:1999) |
| ENV ISO 13530-1998 |
水質水質分析的質量控制指南 |
Water quality - Guide to analytical quality control for water analysis (ISO/TR 13530:1997) |
| ENV ISO 13843-2001 |
水質微生物法的有效使用指南 |
Water quality - Guidance on validation of microbiological methods (ISO/TR 13843:2000) |
| ENV ISO 14253-2-2001 |
產品幾何量技術規范(GPS)工作的測量檢驗和測量設備第2部分：GPS測量中不確定度評估指南和在產品檢驗中 |
Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 1425 |
| ENV ISO 14815-2000 |
公路運輸和公路交通通信信息處理技術（RTTT） 自動車輛和設備識別系統規范 |
Road transport and traffic telematics - Automatic vehicle and equipment identification - System specification (ISO/TR 14815:2000) |
| ENV ISO 14816-2000 |
公路運輸和公路交通通信信息處理技術（RTTT） 自動車輛和設備識別編碼和數據結構 |
Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structures (ISO/TR 14816:2000) |
| ENV ISO 14819-3-2000 |
交通及旅客信息(TTI)經過交通電文編碼的 TTI 電文第3部分：ALERT-C的定位 |
Traffic and Travel Information (TTI) - TTI Messages via traffic message coding - Part 3: Location referencing for ALERT-C (ISO/TS 14819-3:2000) |
| ENV ISO 14825-1996 |
地理數據文件 |
Geographic data files (ISO 14825:1996) |
| ENV ISO 14904-2002 |
公路運輸和公路交通通信信息處理技術（RTTT）電子收費系統(EFC)操作員之間票據結算接口的規范 |
Road transport and traffic telematics - Electronic fee collection (EFC) - Interface specification for clearing between operators (ISO/TS 14904:2002) |
| ENV ISO 14906-1998 |
公路運輸和公路交通通信信息處理技術（RTTT）電子自動收費系統(EFC)短程通信應用接口定義 |
Road Transport and Traffic Telematics (RTTT) - Electronic Fee Collection (EFC) - Application interface definition for dedicated short range communications (ISO/TR 14906:1998) |
| ENV ISO 14907-1-2000 |
道路運輸與交通信息通訊業務電子收費系統操作員及固定設備的試驗方法第1部分：試驗方法的描述 |
Road Transport and Traffic Telematics (RTTT) - Electronic Fee Collection (EFC) - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TR 14907-1:2000) |
| ENV ISO 8502-1-1999 |
涂裝油漆和有關產品前鋼材預處理表面清潔度的評定試驗第1部分：可溶性鐵銹現場試驗 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 1: Field test for soluble iron corrosion products (ISO/TR 8502-1:1991) |
| H) of water from fruit juices - Method using isotope ratio mass spectrometry> |
H) of water from fruit juices - Method using isotope ratio mass spectrometry> |
水果和蔬菜汁果汁中水的穩定氫同位素比測定2H/1H同位素比質譜分析法 |
| IEC 60417/ISO 7000-DB-2004 |
設備上用的圖形符號 |
|
| ISO 1-2002 |
產品幾何量技術規范(GPS).產品幾何量技術規范和驗證的標準基準溫度 |
(Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specification and verification) |
| ISO 1000 AMD 1-1998 |
SI單位及其倍數的使用和其它特定單位的推薦規范 |
(SI units and recommendations for the use of their multiples and of certain other units; Amendment 1) |
| ISO 1000-1992 |
國際單位制(SI)和國際單位制多功能與某些其它單位的使用推薦規程 |
(SI units and recommendations for the use of their multiples and of certain other units) |
| ISO 10002-2004 |
質量管理.顧客滿意度.組織中對投訴處理的指南 |
|
| ISO 10002-2004 |
質量管理.顧客滿意度.組織中對投訴處理的指南 |
|
| ISO 10002-2004 |
質量管理.顧客滿意度.組織中對投訴處理的指南 |
|
| ISO 10005-1995 |
質量管理.質量計劃導則 |
(Quality management - Guidelines for quality plans) |
| ISO 10006-2003 |
質量管理體系.項目質量管理指南 |
(Quality management systems - Guidelines for quality management in projects) |
| ISO 10006-2003 |
質量管理體系.項目質量管理指南 |
|
| ISO 10007-2003 |
質量管理體系.技術狀態管理指南 |
(Quality management systems - Guidelines for configuration management) |
| ISO 10007-2003 |
質量管理體系.技術狀態管理指南 |
|
| ISO 10007-2003 |
質量管理體系.技術狀態管理指南 |
|
| ISO 1001-1986 |
信息處理.信息交換用磁帶的文件結構和標號 |
(Information processing; File structure and labelling of magnetic tapes for information interchange) |
| ISO 10012-1-1992 |
測量設備質量保證要求.第1部分:測量設備的計量確認系統 |
(Quality assurance requirements for measuring equipment; part 1: metrological confirmation system for measuring equipment) |
| ISO 10012-2-1997 |
測量設備質量保證要求.第2部分:測量制造人控制導則 |
(Quality assurance for measuring equipment - Part 2: Guidelines for control of measurement processes) |
| ISO 10012-2003 |
測量管理系統.測量方法和測量設備的要求 |
(Measurement management systems - Requirements for measurement processes and measuring equipment) |
| ISO 10012-2003 |
測量管理系統.測量方法和測量設備的要求 |
|
| ISO 10015-1999 |
質量管理.培訓導則 |
(Quality management - Guidelines for training) |
| ISO 1002-1983 |
滾動軸承.飛機構架軸承.特性,外形尺寸,公差,額定靜負荷 |
(Rolling bearings; Airframe bearings; Characteristics, boundary dimensions, tolerances, static load ratings) |
| ISO 1003-1980 |
香料和調味品.姜,姜片或姜粉.規范 |
(Spices and condiments; Ginger, whole, in pieces, or ground; Specification) |
| ISO 1004-1995 |
信息處理.磁性墨水字符識別.打印規范 |
(Information processing - Magnetic ink character recognition - Print specifications) |
| ISO 10042-1992 |
鋁及其可焊合金電弧焊接頭.質量缺陷等級導則 |
(Arc-welded joints in aluminium and its weldable alloys; guidance on quality levels for imperfections) |
| ISO 10043 Technical Corrigendum 1-1999 |
銀行業務及有關金融服務.信息交換.托收委托書格式.技術勘誤1 |
(Banking and related financial services - Information interchange - Collection order form; Technical Corrigendum 1) |
| ISO 10043-1994 |
銀行業務及有關金融服務.信息交換.托收委托書格式 |
(Banking and related financial services - Information interchange - Collection order form) |
| ISO 10044 Technical Corrigendum 1-1999 |
銀行和有關的金融服務設施.信息交流.押匯信用證形式.技術勘誤1 |
(Banking and related financial services - Information interchange - Documentary credit form; Technical Corrigendum 1) |
| ISO 10044-1995 |
銀行和有關的金融服務設施.信息交流.押匯信用證形式 |
(Banking and related financial services - Information interchange - Documentary credit form) |
| ISO 10045-1991 |
高山雪橇.緊固部位.試驗螺釘?shù)囊?/td>
| (Alpine skis; binding mounting area; requirements for test screws) |
| ISO 10046-1996 |
飛行器.貨艙體積的計算方法 |
(Aircraft - Methodology of calculating cargo compartment volumes) |
| ISO 10047-1993 |
紡織品.織物表面燃燒時間的測定 |
(Textiles; determination of surface burning time of fabrics) |
| ISO 10049-1992 |
鋁合金鑄件.用目視法評定多孔性 |
(Aluminium alloy castings; visual method for assessing the porosity) |
| ISO 1005-1-1994 |
鐵路車輛材料.第1部分:牽引和拖動的粗軋車輪.質量要求 |
(Railway rolling stock material - Part 1: Rough-rolled tyres for tractive and trailing stock; technical delivery conditions) |
| ISO 1005-2-1986 |
鐵路車輛材料.第2部分:牽引和拖動的車輪,輪體輪箍.尺寸、平衡和組裝要求 |
(Railway rolling stock material; Part 2 : Tyres, wheel centres and tyred wheels for tractive and trailing stock; Dimensional, balancing and assembly requirements) |
| ISO 1005-3-1982 |
鐵路車輛材料.第3部分:牽引和拖動的輪軸.質量要求 |
(Railway rolling stock material; Part 3 : Axles for tractive and trailing stock; Quality requirements) |
| ISO 1005-4-1986 |
鐵路車輛材料.第4部分:牽引和拖動的車輪.軋制或鍛造的輪體.質量要求 |
(Railway rolling stock material; Part 4 : Rolled or forged wheel centres for tyred wheels for tractive and trailing stock; Quality requirements) |
| ISO 1005-6-1994 |
鐵路車輛材料.第6部分:牽引和拖動車輪實心輪.質量要求 |
(Railway rolling stock material - Part 6: Solid wheels for tractive and trailing stock; technical delivery conditions) |
| ISO 1005-7-1982 |
鐵路車輛材料.第7部分:牽引和拖動的輪副.質量要求 |
(Railway rolling stock material; Part 7 : Wheelsets for tractive and trailing stock; Quality requirements) |
| ISO 1005-8-1986 |
鐵路車輛材料.第8部分:牽引和拖動的車輪實心輪.尺寸和平衡要求 |
(Railway rolling stock material; Part 8 : Solid wheels for tractive and trailing stock; Dimensional and balancing requirements) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com