標準號 |
中文名稱 |
英文名稱 |
| ISO 6365-1-1988 |
鍛鋁和鋁合金冷拉線材.第1部分:檢查及交貨的技術條件 |
Wrought aluminium and aluminium alloy cold-drawn wire; part 1: technical conditions for inspection and delivery |
| ISO 6370-1-1991 |
釉瓷和搪瓷.耐磨性測定.第1部分:耐磨試驗器械 |
Vitreous and porcelain enamels; determination of the resistance to abrasion; part 1: abrasion testing apparatus |
| ISO 6370-2-1991 |
釉瓷和搪瓷.耐磨性測定.第2部分:表層耐磨后質量的損失 |
Vitreous and porcelain enamels; determination of the resistance to abrasion; part 2: loss in mass after sub-surface abrasion |
| ISO 6372-1-1989 |
鎳和鎳合金.術語和定義.第1部分:材料 |
Nickel and nickel alloys; terms and definitions; part 1: materials |
| ISO 6372-2-1989 |
鎳和鎳合金.術語和定義.第2部分:精制產品 |
Nickel and nickel alloys; terms and definitions; part 2: refinery products |
| ISO 6372-3-1989 |
鎳和鎳合金.術語和定義.第3部分:鍛造產品和鑄件 |
Nickel and nickel alloys; terms and definitions; part 3: wrought products and castings |
| ISO 6374-1981 |
工業用天然及人造冰晶石和氟化鋁.磷含量的測定.萃取后原子吸收分光譜法 |
Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of phosphorus content; Atomic absorption spectrometric method after extraction |
| ISO 6375-1980 |
煉鋁用碳素材料.電極用焦炭.取樣 |
Carbonaceous materials for the production of aluminium; Cokes for electrodes; Sampling |
| ISO 6376-1980 |
煉鋁用碳素材料.電極用瀝青.甲苯不溶物含量的測定 |
Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of content of toluene-insoluble material |
| ISO 6377-1981 |
工業用輕質烯烴.用氣相色譜法測定雜質.一般原則 |
Light olefins for industrial use; Determination of impurities by gas chromatography; General considerations |
| ISO 6378-1981 |
工業用丁二烯.烴類雜質的測定.氣相色譜法 |
Butadiene for industrial use; Determination of hydrocarbon impurities; gas chromatographic method |
| ISO 6379-1981 |
工業用乙烯.烴類雜質的測定.氣相色譜法 |
Ethylene for industrial use; Determination of hydrocarbon impurities; Gas chromatographic method |
| ISO 638-1978 |
紙漿.干物質含量的測定 |
Pulps; Determination of dry matter content |
| ISO 6380-1981 |
工業用丙烯.烴類雜質的測定.氣相色譜法 |
Propylene for industrial use; Determination of hydrocarbon impurities; Gas chromatographic method |
| ISO 6381-1981 |
工業用乙烯和丙烯.微量一氧化碳和二氧化碳的測定.氣相色譜法 |
Ethylene and propylene for industrial use; Determination of traces of carbon monoxide and carbon dioxide; Gas chromatographic method |
| ISO 6382-1981 |
測定硅含量的一般方法.還原鉬硅酸鹽的分光光度計法 |
General method for determination of silicon content; Reduced molybdosilicate spectrophotometric method |
| ISO 6383-1-1983 |
塑料.薄膜和薄板.耐撕裂性測定.第1部分:分岔褲型撕裂法 |
Plastics; Film and sheeting; Determination of tear resistance; Part 1 : Trouser tear method |
| ISO 6383-2-1983 |
塑料.薄膜和薄板.耐撕裂性測定.第2部分:埃爾曼多(ELMENDORF)法 |
Plastics; Film and sheeting; Determination of tear resistance; Part 2 : Elmendorf method |
| ISO 6384-1981 |
表面活性劑.工業用乙氧基脂肪胺.分析方法 |
Surface active agents; Technical ethoxylated fatty amines; Methods of analysis |
| ISO 6385-1981 |
設計工作系統的人類工效學原理 |
Ergonomic principles of the design of work systems |
| ISO 6385-2004 |
工作系統設計的人類工效學原則 |
|
| ISO 6387-1983 |
表面活性劑.鈣皂分散力的測定.酸量滴定法(改進的施彎費爾德(Schoenfeidt) |
Surface active agents; Determination of the power to disperse calcium soap; Acidimetric method (Modified Schoenfeldt method) |
| ISO 6388-1989 |
表面活性劑.使用旋轉粘度計測定流動特性 |
Surface active agents; determination of flow properties using a rotational viscometer |
| ISO 639-1-2002 |
語種名稱代碼.第1部分:α-2代碼 |
Codes for the representation of names of languages - Part 1: Alpha-2 code |
| ISO 639-2-1998 |
語種名稱代碼.第2部分:字母3代碼 |
Codes for the representation of names of languages - Part 2: Alpha-3 code |
| ISO 6391-1997 |
肉和肉制品.大腸桿菌的計數.在44℃用膜材料的計群法 |
Meat and meat products - Enumeration of Escherichia coli - Colony-count technique at 44 C using membranes |
| ISO 6392-1-1996 |
土方機械.潤滑件.第1部分:乳頭型 |
Earth-moving machinery - Lubrication fittings - Part 1: Nipple type |
| ISO 6392-2-1996 |
土方機械.潤滑件.第2部分:黃油槍噴嘴 |
Earth-moving machinery - Lubrication fittings - Part 2: Grease-gun nozzles |
| ISO 6393-1998 |
聲學.土方機械發出的外部噪音的測定.靜態試驗條件 |
Acoustics - Measurement of exterior noise emitted by earth-moving machinery - Stationary test conditions |
| ISO 6394-1998 |
聲學.在操作者位置測定土方機械發出的噪音.靜態試驗條件 |
Acoustics - Measurement at the operator`s position of noise emitted by earth-moving machinery - Stationary test conditions |
| ISO 6395 AMD 1-1996 |
聲學.土方機械發出的外部噪聲測量.動力學試驗條件 |
Acoustics - Measurement of exterior noise emitted by earth-moving machinery - Dynamic test conditions; Amendment 1 |
| ISO 6395-1988 |
聲學.推土機發出的外部噪聲測量.動力學試驗條件 |
Acoustics; measurement of exterior noise emitted by earth-moving machinery; dynamic test conditions |
| ISO 6396-1992 |
聲學.土方機械發出噪聲的操作員位置測量.動態試驗條件 |
Acoustics; measurement at the operator`s position of noise emitted by earth-moving machinery; dynamic test conditions |
| ISO 6401-1985 |
塑料.氯乙烯均聚物和共聚物樹脂.剩余的氯乙烯單體的測定.氣相色譜法 |
Plastics; Homopolymer and copolymer resins of vinyl chloride; Determination of residual vinyl chloride monomer; Gas chromatographic method |
| ISO 6402-1-2002 |
塑料.丙烯腈-苯乙烯-丙烯酸酯、丙烯腈-(乙烯-丙烯-二烯烴)-苯乙烯和丙烯腈-(氯化聚乙烯)-苯乙烯模制和擠壓材料.第1部分:命名系統和基本規范 |
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
| ISO 6402-2-1994 |
塑料.耐沖擊丙烯腈/苯乙烯模制和擠壓材料(ASA,AES,ACS),丁二烯改型材料除外.第2部分:試驗試樣的制備和特性的測定 |
Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 2: Preparation of test specimens and determination of properties |
| ISO 6402-2-2003 |
塑料.丙烯腈-苯乙烯-丙烯酸酯、丙烯腈-(乙烯-丙烯-二烯烴)-苯乙烯和丙烯腈-(氯化聚乙烯)-苯乙烯模制和擠壓材料.第2部分:試樣制備和性能測定 |
|
| ISO 6403-1988 |
液壓傳動.控制流量及壓力的閥.試驗方法 |
Hydraulic fluid power; valves controlling flow and pressure; test methods |
| ISO 6405-1 AMD 1-1997 |
土方機械.操作員控制鈕和其它顯示鈕符號.第1部分:通用符號.補充件1:附加符號 |
Earth-moving machinery - Symbols for operator controls and other displays - Part 1: Common symbols; Amendement 1: Additional symbols |
| ISO 6405-1 AMD 2-1999 |
土方機械.操作員控制鈕和其它顯示鈕符號.第1部分:通用符號.補充件2:附加符號 |
Earth-moving machinery - Symbols for operator controls and other displays - Part 1: Common symbols; Amendment 2: Additional symbols |
| ISO 6405-1-1991 |
土方機械.操作員控制鈕和其它顯示鈕符號.第1部分:通用符號 |
Earth-moving machinery - Symbols for operator controls and other displays - Part 1: Common symbols |
| ISO 6405-1-2004 |
土方機械.司機操縱裝置和其他顯示裝置用符號.第1部分:通用符號 |
|
| ISO 6405-2 AMD 1-1997 |
土方機械.操作員控制鈕和其它顯示鈕符號.第2部分:機器.設備和附件的專用符號.修改件1 |
Earth-moving machinery - Symbols for operator controls and other displays - Part 2: Specific symbols for machines, equipment and accessories; Amendment 1: Additional symbols |
| ISO 6405-2-1993 |
土方機械.操作員控制鈕和其它顯示鈕符號.第2部分:機器.設備和附件的專用符號 |
Earth-moving machinery - Symbols for operator controls and other displays - Part 2: Specific symbols for machines, equipment and accessories |
| ISO 6406-1992 |
無縫鋼氣瓶的定期檢驗和試驗 |
Periodic inspection and testing of seamless steel gas cylinders |
| ISO 641-1975 |
實驗室玻璃器皿.可互換的球面磨口 |
Laboratory glassware; Interchangeable spherical ground joints |
| ISO 6410-1-1993 |
技術制圖.螺釘和螺紋部件.第1部分:通用規范 |
Technical drawings; screw threads and threaded parts; part 1: general conventions |
| ISO 6410-2-1993 |
技術制圖.螺釘和螺紋部件.第2部分:螺紋嵌鑲件 |
Technical drawings; screw threads and threaded parts; part 2: screw thread inserts |
| ISO 6410-3-1993 |
技術制圖.螺釘和螺紋部件.第3部分:簡化表示 |
Technical drawings; screw threads and threaded parts; part 3: simplified representation |
| ISO 6411-1982 |
技術制圖.中心孔的簡化畫法 |
Technical drawings; Simplified representation of centre holes |
| ISO 6412-1-1989 |
技術制圖.管道的簡化表示法.第1部分:通則和正交表示法 |
Technical drawings; simplified representation of pipelines; part 1: general rules and orthogonal representation |
| ISO 6412-2-1989 |
技術制圖.管道的簡化表示法.第2部分:等角投影 |
Technical drawings; simplified representation of pipelines; part 2: isometric projection |
| ISO 6412-3-1993 |
技術制圖.管道的簡化表示法.第3部分:通風和排放系統終端部件 |
Technical drawings; simplified representation of pipelines; part 3: terminal features of ventilation and drainage systems |
| ISO 6413-1988 |
技術制圖.花鍵和鋸齒形花鍵的表示方法 |
Technical drawings; representation of splines and serrations |
| ISO 6414-1982 |
玻璃器皿的技術制圖 |
Technical drawings for glassware |
| ISO 6415-1990 |
內燃機.離心式潤滑油濾清器.尺寸 |
Internal combustion engines; spin-on filters for lubricating oil; dimensions |
| ISO 6416-1992 |
明渠液體流量測量.用超聲波(聲學)法測量排水量 |
Measurement of liquid flow in open channels; measurement of discharge by the ultrasonic (acoustic) method |
| ISO 6416-2004 |
水文測量.超聲波(聲波)法測量流量 |
|
| ISO 6416-2004 |
水文測量.超聲波(聲波)法測量流量 |
|
| ISO 642-1999 |
鋼.端頭淬硬性試驗(喬米尼(Jominy)試驗) |
Steel - Hardenability test by end quenching (Jominy test) |
| ISO 6420-1984 |
明渠液體流量測量.水文測量船的位置固定設備 |
Liquid flow measurement in open channels; Position fixing equipment for hydrometric boats |
| ISO 6422-1985 |
貿易文件的編排檢索 |
Layout key for trade documents |
| ISO 6425-1996 |
潛水表 |
Divers` watches |
| ISO 6426-1-1982 |
鐘表詞匯.第1部分:技術的和科學的定義 |
Horological vocabulary; Part 1 : Technical and scientific definitions |
| ISO 6426-2 Technical Corrigendum 1-2003 |
鐘表詞匯.第2部分:商業和技術定義.技術勘誤1 |
(Horological vocabulary - Part 2: Technical and commercial definitions; Technical Corrigendum 1) |
| ISO 6426-2 Technical Corrigendum 1-2003 |
鐘表詞匯.第2部分:商業和技術定義.技術勘誤1 |
|
| ISO 6426-2-2002 |
鐘表詞匯.第2部分:商業技術定義 |
Horological vocabulary - Part 2: Technical and commercial definitions |
| ISO 6427-1992 |
塑料.有機溶劑可萃取物的測定(常規法) |
Plastics; determination of matter extractable by organic solvents (conventional methods) |
| ISO 6428-1982 |
技術制圖.縮微復制的要求 |
(Technical drawings; Requirements for microcopying) |
| ISO 643-2003 |
鋼.表面粒度的縮微照相測定 |
Steels - Micrographic determination of the apparent grain size |
| ISO 643-2003 |
鋼.表面粒度的縮微照相測定 |
|
| ISO 6430-1992 |
氣壓傳動.有整體裝配架.32-250mm缸筒的1000KPa(10bar)系列單桿液壓缸.裝配尺寸 |
Pneumatic fluid power; single rod cylinders, 1000 kPa (10 bar) series, with integral mountings, bores from 32 mm to 250 mm; mounting dimensions |
| ISO 6431-1992 |
氣液傳動.有可拆式裝配架.32-320mm缸筒的1000KPa(10bar)系列單桿液壓缸.裝配尺寸 |
Pneumatic fluid power; single rod cylinders, 1000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm; mounting dimensions |
| ISO 6432-1985 |
氣壓傳動.單桿氣缸.10巴(1100kPa)系列.8-25mm的氣缸筒.裝配尺寸 |
Pneumatic fluid power; Single rod cylinders; 10 bar (1 100 kPa) series; Bores from 8 to 25 mm; Mounting dimensions |
| ISO 6433-1981 |
技術制圖.零件標引 |
Technical drawings; Item references |
| ISO 6437-1984 |
銅合金.鉻含量的測定.滴定法 |
Copper alloys; Determination of chromium content; Titrimetric method |
| ISO 6438-1983 |
文獻工作.書目情報交換用非洲編碼字符組 |
Documentation; African coded character set for bibliographic information interchange |
| ISO 6439-1990 |
水質.酚指數的測定.蒸餾后的4-氨基安替比林光譜測定法 |
Water quality; determination of phenol index; 4-aminoantipyrine spectrometric methods after distillation |
| ISO 6440-1985 |
輪椅.專用語、術語和定義 |
Wheelchairs; Nomenclature, terms and definitions |
| ISO 6441-1-1999 |
涂料和清漆.顯微壓痕硬度的測定.第1部分:通過壓痕長度的測量測定努氏硬度 |
Paints and varnishes - Determination of micro-indentation hardness - Part 1: Knoop hardness by measurement of indentation length |
| ISO 6441-2-1999 |
涂料和清漆.顯微壓痕硬度的測定.第2部分:通過載荷下壓痕深度的測量測定努氏硬度 |
Paints and varnishes - Determination of micro-indentation hardness - Part 2: Knoop hardness by measurement of indentation depth under load |
| ISO 6442-1981 |
門扇.一般平直度缺陷的測量 |
Door leaves; Measurement of defects of general flatness |
| ISO 6443-1980 |
門扇.尺寸和垂直度缺陷的測量 |
Door leaves; Measurement of dimensions and of defects of squareness |
| ISO 6444-1980 |
門扇.濕度變化下的性能試驗(氣候持續不變) |
Door leaves; Test of behaviour under humidity variations (successive uniform climates) |
| ISO 6445-1989 |
門和門組件.在兩種不同氣候條件之間的試驗 |
Doors and doorsets; test of behaviour between two different climates |
| ISO 6446-1994 |
橡膠制品.橋承支架.橡膠材料規范 |
Rubber products - Bridge bearings - Specification for rubber materials |
| ISO 6447-1983 |
橡膠密封.供氣管和配件用密封環.材料規范 |
Rubber seals; Joint rings used for gas supply pipes and fittings; Specification for material |
| ISO 6448-1985 |
橡膠密封.提供石油產品管道和配件用密封圈.材料規范 |
Rubber seals; Joint rings used for petroleum product supply pipes and fittings; Specification for material |
| ISO 6451-1982 |
塑料涂敷的織物.聚氯乙烯涂層.熔合的快速檢驗法 |
Plastics coated fabrics; Polyvinyl chloride coatings; Rapid method for checking fusion |
| ISO 6452-2000 |
橡膠或塑料涂覆織物.汽車內部裝飾物的霧氣凝結性能的測定 |
Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles |
| ISO 6453-1985 |
泡沫柔性聚合材料.聚氯乙烯泡沫??規范 |
Polymeric materials, cellular flexible; Polyvinylchloride foam sheeting; Specification |
| ISO 6454-1984 |
造船.吸入式濾網箱 |
Shipbuilding; Strum boxes |
| ISO 6455-1983 |
壓力管用有彈性密封圈型接頭的非增塑聚氯乙烯(PVC)配件.裝接長度的測定.米制系列 |
Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure; Dimensions of laying lengths; Metric series |
| ISO 6460-1981 |
道路車輛.裝有可控火花發動機的摩托車發出的氣體污染物的測量法 |
Road vehicles; Measurement method of gaseous pollutants emitted by motorcycles equipped with a controlled ignition engine |
| ISO 6461-1-1986 |
水質.還原亞硫酸鹽的厭氧菌芽胞(梭狀芽胞桿菌)的探測和計數.第1部分:液態介質增菌法 |
Water quality; Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia); Part 1 : Method by enrichment in a liquid medium |
| ISO 6461-2-1986 |
水質.還原亞硫酸鹽的厭氧菌芽胞(梭狀芽胞桿菌)的探測和計數.第2部分:薄膜過濾法 |
Water quality; Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia); Part 2 : Method by membrane filtration |
| ISO 6462-1983 |
有轉位刀片的面銑刀.尺寸 |
Face milling cutters with indexable inserts; Dimensions |
| ISO 6463-1982 |
動植物脂肪和油.丁基羥基茴香醚和丁基羥基甲苯的測定.氣一液色譜法 |
Animal and vegetable fats and oils; Determination of butylhydroxyanisole (BHA) and butylhydroxytoluene (BHT); Gas-liquid chromatographic method |
| ISO 6464-1983 |
動植物脂肪和油.鎵酸鹽含量的測定.分子吸收光譜測定法 |
Animal and vegetable fats and oils; Determination of gallates content; Molecular absorption spectrometric method |
| ISO 6465-1984 |
整粒枯茗(Cuminum cyminum Linnaeus)規范 |
Whole cumin (Cuminum cyminum Linnaeus); Specification |
| ISO 6466-1983 |
煙草和煙草制品.二硫代氨基甲酸鹽農藥殘留量的測定.分子吸收光譜測定法 |
Tobacco and tobacco products; Determination of dithiocarbamate pesticides residues; Molecular absorption spectrometric method |
| ISO 6467-1980 |
釩鐵.釩含量的測定.電位滴定法 |
Ferrovanadium; Determination of vanadium content; Potentiometric method |
| ISO 6468-1996 |
水質.在液-液萃取后再用氣相法對有機氯殺蟲劑、多氯聯苯和氯苯的測定 |
Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction |
| ISO 6469-1-2001 |
電動道路車輛.安全性規范.第1部分:車輛蓄能器 |
Electric road vehicles - Safety specifications - Part 1: On-board electrical energy storage |
| ISO 6469-2-2001 |
電動道路車輛.安全性規范.第2部分:功能安全裝置和防故障 |
Electric road vehicles - Safety specifications - Part 2: Functional safety means and protection against failures |
| ISO 6469-3 Technical Corrigendum 1-2003 |
電動道路車輛.安全性規范.第3部分:人員的電危險防護.技術勘誤1 |
(Electric road vehicles - Safety specifications - Part 3: Protection of persons against electric hazards; Technical Corrigendum 1) |
| ISO 6469-3 Technical Corrigendum 1-2003 |
電動道路車輛.安全性規范.第3部分:人員的電危險防護.技術勘誤1 |
|
| ISO 6469-3-2001 |
電動道路車輛.安全性規范.第3部分:人員的電危險防護 |
Electric road vehicles - Safety specifications - Part 3: Protection of persons against electric hazards |
| ISO 647-1974 |
褐煤.用低溫蒸溜法測定焦油、水、煤氣和焦渣的產率 |
Brown coals and lignites; Determination of the yields of tar, water, gas and coke residue by low temperature distillation |
| ISO 6471-1994 |
硫化橡膠.壓縮下的結晶效應的測定 |
Rubber, vulcanized; determination of crystallization effects under compression |
| ISO 6472 AMD 1-1999 |
橡膠復合物配方.縮略語.補充件1:新材料 |
Rubber compounding ingredients - Abbreviations; Amendment 1: New materials |
| ISO 6472-1994 |
橡膠復合物配方.縮略語 |
Rubber compounding ingredients - Abbreviations |
| ISO 6472-2004 |
橡膠配合劑.縮略語 |
|
| ISO 6472-2004 |
橡膠配合劑.縮略語 |
|
| ISO 6474-1994 |
外科植入物.高純度礬土基陶瓷材料 |
Implants for surgery; ceramic materials based on high purity alumina |
| ISO 6475-1989 |
外科植入物.帶有不對稱螺紋和球形下表面的金屬接骨螺釘.機械要求和試驗方法 |
Implants for surgery; metal bone screws with asymmetrical thread and spherical under-surface; mechanical requirements and test methods |
| ISO 6477-1988 |
腰果仁.規范 |
Cashew kernels; specification |
| ISO 6478-1990 |
花生.規范 |
Peanuts; specification |
| ISO 6479 Technical Corrigendum 1-1999 |
脫皮甜杏仁.規范.技術勘誤1 |
Shelled sweet kernels of apricots - Specification; Technical Corrigendum 1 |
| ISO 6479-1984 |
脫皮甜杏仁.規范 |
Shelled sweet kernels of apricots; Specification |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com