標準號 |
中文名稱 |
英文名稱 |
| ISO 209-1-1989 |
鍛鋁和鋁合金.化學成分和制品的形式.第1部分:化學成分 |
Wrought aluminium and aluminium alloys; chemical composition and forms of products; part 1: chemical composition |
| ISO 209-2-1989 |
鍛鋁和鋁合金.化學成分和產品的形式.第2部分:產品形式 |
Wrought aluminium and aluminium alloys; chemical composition and forms of products; part 2: forms of products |
| ISO 20905-2004 |
選煤.煤的灰塵/水分關系的測定 |
|
| ISO 2092-1981 |
輕金屬及其合金.化學符號表示牌號的規則 |
Light metals and their alloys; Code of designation based on chemical symbols |
| ISO 2093-1986 |
錫電鍍層.規范和試驗方法 |
Electroplated coatings of tin; Specification and test methods |
| ISO 2094-1999 |
鋪地織物.動態負載下厚度損失的測定 |
Textile floor coverings - Determination of thickness loss under dynamic loading |
| ISO 2096-1972 |
工業用甘油.取樣方法 |
Glycerols for industrial use; Methods of sampling |
| ISO 2097-1972 |
工業用甘油.水含量的測定.費歇爾(Karl Fischer)法 |
Glycerols for industrial use; Determination of water content; Karl Fischer method |
| ISO 2097-1972 |
工業用甘油.水含量的測定.費歇爾(Karl Fischer)法 |
Glycerols for industrial use; Determination of water content; Karl Fischer method |
| ISO 2098-1972 |
工業用甘油.灰分的測定.重量法 |
Glycerols for industrial use; Determination of ash; Gravimetric method |
| ISO 2099-1972 |
工業用純化甘油.在20℃時密度的測定 |
Purified glycerol for industrial use; Determination of density at 20 degrees C |
| ISO 21-1985 |
造船.內河航行.日字環錨鏈的鋼索起重機 |
Shipbuilding; Inland navigation; Cable-lifters for stud-link anchor chains |
| ISO 2100-1987 |
飛機.電線接線器.試驗 |
Aircraft; Electrical connectors; Tests |
| ISO 21005-2004 |
船舶和海上技術.窗戶和舷窗用熱鋼化安全玻璃 |
|
| ISO 21010-2004 |
低溫容器.氣體/材料相容性 |
|
| ISO 21028-1-2004 |
低溫容器.低溫下材料的韌性要求.第1部分:溫度低于-80 鳦 |
|
| ISO 21028-2-2004 |
低溫容器.低溫下材料的韌性要求.第2部分:溫度處于-80鳦到-20鳦之間 |
|
| ISO 21029-1-2004 |
低溫容器.不超過1000升容量的可運輸真空絕緣容器.第1部分:設計、制造、檢驗和試驗 |
|
| ISO 21029-2-2004 |
低溫容器.不超過1000升容量的可運輸真空絕緣容器.第2部分:操作要求 |
|
| ISO 2103-1986 |
住宅和公共建筑物內由于居住和使用而引起的荷載 |
Loads due to use and occupancy in residential and public buildings |
| ISO 21048-2004 |
塑料.環氧樹脂.1,2-乙二醇含量的測定 |
|
| ISO 21049-2004 |
泵.離心和旋轉泵用軸密封系統 |
|
| ISO 21049-2004 |
泵.離心和旋轉泵用軸密封系統 |
|
| ISO 2106 AMD 1-1983 |
修改件1 |
Anodizing of aluminium and its alloys; determination of surface density of anodic oxide coatings; gravimetric method; amendment 1 |
| ISO 2106-1982 |
鋁及其合金的陽極氧化.陽極氧化物鍍層單位面積質量(表面密度)的測定.重量法 |
Anodizing of aluminium and its alloys; Determination of mass per unit area (surface density) of anodic oxide coatings; Gravimetric method |
| ISO 21069-1-2004 |
道路車輛.使用輥式制動試驗器的最大容許總質量超過3.5 t的車輛上制動系統的試驗.第1部分:氣壓制動系 |
|
| ISO 2107-1983 |
鋁、鎂及其合金.回火名稱與符號 |
Aluminium, magnesium and their alloys; Temper designations |
| ISO 2107-2004 |
鋁和鋁合金.鍛造制品.狀態代號 |
|
| ISO 2108-1992 |
情報和文獻.國際標準圖書標準號(ISBN) |
Information and documentation; international standard book numbering (ISBN) |
| ISO 2109-1975 |
連續機械裝卸設備.松散物料用的輕型皮帶輸送機 |
Continuous mechanical handling equipment; Light duty belt conveyors for loose bulk materials |
| ISO 21093-2003 |
矮種松樹油 |
(Oil of dwarf pine (Pinus mugo Turra)) |
| ISO 21093-2003 |
矮種松樹油 |
|
| ISO 2110-1989 |
信息技術.數據通信.25插腳的數據終端設備/數據線路終端設備(DTE/DCE)的接 口連接件和插腳分配 |
Information technology; data communication; 25-pole DTE/DCE interface connector and contact number assignments |
| ISO 21107-2004 |
滾動軸承和球面滑動軸承.電子介質用查尋結構.用屬性詞匯標識的特性和性能標準 |
|
| ISO 2112-1990 |
塑料.氨基塑料模塑材料.規范 |
Plastics; aminoplastic moulding materials; specification |
| ISO 2113 Technical Corrigendum 1-2003 |
增強纖維.機織物.基本規范.技術勘誤1 |
Reinforcement fibres - Woven fabrics - Basis for a specification; Technical Corrigendum 1 |
| ISO 2113 Technical Corrigendum 1-2003 |
增強纖維.機織物.基本規范.技術勘誤1 |
|
| ISO 2113-1996 |
增強纖維.機織物.基本規范 |
Reinforcement fibres - Woven fabrics - Basis for a specification |
| ISO 2114-2000 |
塑料(聚脂樹脂)、涂料和清漆(膠粘劑).部分酸值和總酸值的測定 |
Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value |
| ISO 21147-2003 |
細切煙草及煙草制品.吸煙后所產生物質的檢查和分析 |
Fine-cut tobacco and smoking articles made from it - Survey and analysis of consumer-made articles |
| ISO 21147-2003 |
細切煙草及煙草制品.吸煙后所產生物質的檢查和分析 |
|
| ISO 2115-1996 |
塑料.高聚物散體.中和點溫度和最低成型溫度的測定 |
Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature |
| ISO 21187-2004 |
牛奶.細菌學質量的定量測定.建立和驗證常規法結果和固有法結果之間的轉換關系的指南 |
|
| ISO 21187-2004 |
牛奶.細菌學質量的定量測定.建立和驗證常規法結果和固有法結果之間的轉換關系的指南 |
|
| ISO 21187-2004 |
牛奶.細菌學質量的定量測定.建立和驗證常規法結果和固有法結果之間的轉換關系的指南 |
|
| ISO 212-1973 |
香精油.取樣 |
Essential oils; Sampling |
| ISO 2120-1972 |
工業用液態氯.蒸汽氯(體積)中氯含量的測定 |
Liquid chlorine for industrial use; Determination of the content of chlorine by volume in the vaporized product |
| ISO 21207-2004 |
人工氣候下的腐蝕試驗.包括交替暴露于腐蝕促進氣體、中性鹽霧和干燥中的加速腐蝕試驗 |
|
| ISO 2121-1972 |
工業用液態氯.水含量的測定.重量法 |
Liquid chlorine for industrial use; Determination of water content; Gravimetric method |
| ISO 2122-1972 |
工業用硅酸鈉和硅酸鉀.沸騰水難溶物的溶液制備和水不溶物的含量的測定 |
Sodium and potassium silicates for industrial use; Preparation of solution of products not easily soluble in boiling water and determination of matter insoluble in water |
| ISO 21227-1-2003 |
色漆和清漆.光成像法評定涂覆表面的缺陷.第1部分:通用指南 |
(Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance) |
| ISO 21227-1-2003 |
色漆和清漆.光成像法評定涂覆表面的缺陷.第1部分:通用指南 |
|
| ISO 2123-1972 |
工業用硅酸鈉和硅酸鉀.動態粘度的測定 |
Sodium and potassium silicates for industrial use; Determination of dynamic viscosity |
| ISO 2124-1972 |
工業用硅酸鈉和硅酸鉀.二氧化硅含量的測定.滴定法 |
Sodium and potassium silicates for industrial use; Determination of silica content; Titrimetric method |
| ISO 21270-2004 |
表面化學分析.X射線光電子和俄歇電子光譜儀.強度標的線性度 |
|
| ISO 2128-1976 |
鋁及其合金的陽極氧化.陽極氧化物鍍層厚度的測定.分光顯微鏡的無損測量 |
Anodizing of aluminium and its alloys; Determination of thickness of anodic oxide coatings; Non-destructive measurement by split-beam microscope |
| ISO 21287-2004 |
氣壓傳動.氣缸.1000 kPa (10 bar) 系列、缸徑從 20 mm 到 100 mm的小型缸 |
|
| ISO 21287-2004 |
氣壓傳動.氣缸.1000 kPa (10 bar) 系列、缸徑從 20 mm 到 100 mm的小型缸 |
|
| ISO 21287-2004 |
氣壓傳動.氣缸.1000 kPa (10 bar) 系列、缸徑從 20 mm 到 100 mm的小型缸 |
|
| ISO 2131-1972 |
表面活性劑.簡化分類法 |
Surface active agents; Simplified classification |
| ISO 2132 AMD 1-1975 |
第1次修改 |
Offset duplicators; attachment features fo plates; amendment 1 |
| ISO 2132-1972 |
復印機.感光板附件特性 |
Offset duplicators; Attachment features of plates |
| ISO 21329-2004 |
石油和天然氣工業.管道運輸系統.機械連接器的試驗過程 |
|
| ISO 21329-2004 |
石油和天然氣工業.管道運輸系統.機械連接器的試驗過程 |
|
| ISO 2133-1976 |
復印機用的漏印板.最小復印面和附件特性 |
Stencils for duplicators; Minimum overprint and attachment features |
| ISO 2135-1984 |
鋁及其合金的陽極氧化.用人工光源的帶色陽極氧化物鍍層不褪色性的加速試驗 |
Anodizing of aluminium and its alloys; Accelerated test of light fastness of coloured anodic oxide coatings using artificial light |
| ISO 2137-1985 |
石油產品.潤滑脂和礦脂.錐入度的測定 |
Petroleum products; Lubricating grease and petrolatum; Determination of cone penetration |
| ISO 21389-2004 |
中國松節油 |
|
| ISO 2139-1975 |
松散物料的連續機械裝卸設備.有搖動式或往復式送料機的管型槽振動式輸送機 |
Continuous mechanical handling equipment for loose bulk materials; Oscillating conveyors and shaking or reciprocating feeders with tubular trough |
| ISO 214-1976 |
文獻工作.出版物和文獻的摘要 |
Documentation; Abstracts for publications and documentation |
| ISO 2140-1975 |
松散物料的連續機械裝卸設備.裙式輸送機 |
Continuous mechanical handling equipment for loose bulk materials; Apron conveyors |
| ISO 2142-1981 |
鍛鋁、鎂及其合金.機械性能試驗用樣品和試件的選擇 |
Wrought aluminium, magnesium and their alloys; Selection of specimens and test pieces for mechanical testing |
| ISO 2143-1981 |
鋁及其合金的陽極氧化.密封后的陽極氧化物鍍層吸收能力損失的估計.用預先酸處理的染色點試驗 |
Anodizing of aluminium and its alloys; Estimation of loss of absorptive power of anodic oxide coatings after sealing; Dye spot test with prior acid treatment |
| ISO 2144-1997 |
紙,紙板和紙漿.900℃燃燒殘留物(灰分)的測定 |
Paper,boards and pulps - Determination of residue (ash) on ignition at 900 C |
| ISO 2145-1978 |
文獻工作.書寫文獻的部分和細目標準號 |
Documentation; Numbering of divisions and subdivisions in written documents |
| ISO 21467-2004 |
土方機械.臥式定向鉆頭.術語和規范 |
|
| ISO 2148-1974 |
連續裝卸設備.術語.三種語言版 |
Continuous handling equipment; Nomenclature Bilingual edition |
| ISO 215-1986 |
文獻工作.期刊和其它連續書刊的介紹描述 |
Documentation; Presentation of contributions to periodicals and other serials |
| ISO 2151-1972 |
室外用壓縮機/原動機裝置發出的氣載噪音測量 |
Measurement of airborne noise emitted by compressor/primemover-units intended for outdoor use (To be replaced by future ISO 3989 of TC 43) |
| ISO 2151-2004 |
聲學.壓縮機和真空泵的噪聲試驗規范.工程方法(2級) |
|
| ISO 21528-1-2004 |
食品和動物飼料的微生物學.腸桿菌科檢測和計數的水平法.第1部分:通過預濃縮MPN技術進行計數和檢測 |
|
| ISO 21528-2-2004 |
食品和動物飼料的微生物學.腸桿菌科檢測和計數的水平法.第2部分:菌落計數法 |
|
| ISO 21530-2004 |
牙科學.牙科設備表面用材料.耐化學消毒劑的測定 |
|
| ISO 21533-2003 |
牙科.韌帶內注射用可重復使用的管式注射器 |
(Dentistry - Reusable cartridge syringes intended for intraligamentary injections) |
| ISO 21533-2003 |
牙科.韌帶內注射用可重復使用的管式注射器 |
|
| ISO 21534-2002 |
非活性外科植入物.關節替代用植入物.特殊要求 |
Non-active surgical implants - Joint replacement implants - Particular requirements |
| ISO 21535-2002 |
非活性外科植入物.關節替代用植入物.髖關節替代用植入物的特殊要求 |
Non-active surgical implants - Joint replacement implants - Specific requirements for hip-joint replacement implants |
| ISO 21536-2002 |
非活性外科植入物.關節替代用植入物.膝關節替代用植入物的特殊要求 |
Non-active surgical implants - Joint replacement implants - Specific requirements for knee-joint replacement implants |
| ISO 21537-1-2004 |
超磨料切割砂輪用夾具法蘭.第1部分:天然石料 |
|
| ISO 21537-1-2004 |
超磨料切割砂輪用夾具法蘭.第1部分:天然石料 |
|
| ISO 21537-1-2004 |
超磨料切割砂輪用夾具法蘭.第1部分:天然石料 |
|
| ISO 21537-2-2004 |
超磨料切割砂輪用夾具法蘭.第2部分:建筑和施工 |
|
| ISO 21537-2-2004 |
超磨料切割砂輪用夾具法蘭.第2部分:建筑和施工 |
|
| ISO 21537-2-2004 |
超磨料切割砂輪用夾具法蘭.第2部分:建筑和施工 |
|
| ISO 21538-2004 |
超磨料切割砂輪用坯件.安裝和固定孔.建筑施工和土木工程 |
|
| ISO 21549-1-2004 |
健康信息.病人健康卡數據.第1部分:一般結構 |
|
| ISO 21549-2-2004 |
健康信息學.病人健康卡數據.第2部分:通用對象 |
|
| ISO 21549-3-2004 |
健康信息學.病人健康卡數據.第3部分:受限的臨床數據 |
|
| ISO 2155-1974 |
飛機.耐火電纜.性能要求 |
Aircraft; Fire-resisting electrical cables; Performance requirements |
| ISO 21550-2004 |
攝影.攝影圖片用電子掃描器.動態范圍測量 |
|
| ISO 2156-1974 |
飛機.耐火電纜.試驗方法 |
Aircraft; Fire-resisting electrical cables; Methods of test |
| ISO 21567-2004 |
食品和動物飼料的微生物學.志賀氏桿菌檢測的水平法 |
|
| ISO 2157-1992 |
牙科用旋轉器械.公稱直徑和命名代碼 |
Dental rotary instruments; nominal diameters and designation code number |
| ISO 21572-2004 |
食品.基因改良有機物及衍生產品的檢測方法.基于蛋白質的方法 |
|
| ISO 21572-2004 |
食品.基因改良有機物及衍生產品的檢測方法.基于蛋白質的方法 |
|
| ISO 216-1975 |
書寫紙和某些印刷紙.裁切后尺寸.A和B系列 |
Writing paper and certain classes of printed matter; Trimmed sizes; A and B series |
| ISO 2160-1998 |
石油產品.對銅的腐蝕性.銅片試驗 |
Petroleum products - Corrosiveness to copper - Copper strip test |
| ISO 2162-1-1993 |
技術產品文獻.彈簧.第1部分:簡圖 |
Technical product documentation; springs; part 1: simplified representation |
| ISO 2162-2-1993 |
技術產品文獻.彈簧.第2部分:圓柱形螺旋壓縮彈簧的數據表示 |
(Technical product documentation; springs; part 2: presentation of data for cylindrical helical compression springs) |
| ISO 21627-1-2002 |
塑料.環氧樹脂.氯含量的測定.第1部分:無機氯 |
(Plastics; Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine) |
| ISO 21627-2-2002 |
塑料.環氧樹脂.氯含量的測定.第2部分:易皂化氯 |
(Plastics; Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine) |
| ISO 21627-3-2002 |
塑料.環氧樹脂.氯含量的測定.第3部分:總氯 |
(Plastics; Epoxy resins - Determination of chlorine content - Part 3: Total chlorine) |
| ISO 2163-1975 |
工業用運貨車.車輪和腳輪.詞匯.兩種語言版 |
(Industrial trucks; Wheels and castors; Vocabulary Bilingual edition) |
| ISO 2164-1975 |
豆科作物.苷氫氰酸的測定 |
Pulses; Determination of glycosidic hydrocyanic acid |
| ISO 21647-2004 |
醫療電氣設備.呼吸氣監測器的基本安全和主要性能的特殊要求 |
|
| ISO 21647-2004 |
醫療電氣設備.呼吸氣監測器的基本安全和主要性能的特殊要求 |
|
| ISO 2165-1974 |
商品馬鈴薯.貯存指南 |
Ware potatoes; Guide to storage |
| ISO 2166-1981 |
胡蘿卜.貯存指南 |
Carrots; Guide to storage |
| ISO 2167-1991 |
圓頭卷心菜.冷藏和冷凍運輸指南 |
Round-headed cabbage; guide to cold storage and refrigerated transport |
| ISO 21670-2003 |
帶法蘭的六角焊接螺母 |
(Hexagon weld nuts with flange) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com