標準號 |
中文名稱 |
英文名稱 |
| DIN ISO 3019-2-2004 |
液壓傳動.容積式泵和馬達的安裝法蘭和軸伸的尺寸及標注代號.第2部分:米制系列 |
|
| DIN ISO 3019-3-1984 |
液壓傳動.變?nèi)菡婵毡煤婉R達.裝配法蘭盤和軸端的尺寸及識別代碼.第3部分:多邊形法蘭盤(包括圓形法蘭盤) |
(Hydraulik fluid power; positive displacement pumps and motors; dimensions and identification code for mounting flanges and shaft ends; part 3: polygonal flanges (including circular flanges)) |
| DIN ISO 3039-1993 |
瓦愣纖維板.剝離后紙層重量的測定 |
(Corrugated fibreboard; determination of the grammage of the component papers after separation; identical with ISO 3039:1975) |
| DIN ISO 3040-1991 |
技術制圖.錐體尺寸和公差注法 |
(Technical drawings; dimensioning and tolerancing; cones; identical with ISO 3040:1990) |
| DIN ISO 3046-1-1998 |
往復式內燃機.性能.第1部分:功率.燃料消耗量和潤滑油消耗量的標準參比條件和說明 |
(Reciprocating internal combustion engines - Performance - Part 1: Standard reference conditions, declarations of power, fuel and lubricating oil consumption and test methods (ISO 3046-1:1995)) |
| DIN ISO 3046-3-1994 |
往復式內燃機.性能.第3部分:試驗測量 |
(Reciprocating internal combustion engines; performance - Part 3: Test measurements; identical with ISO 3046-3:1989) |
| DIN ISO 3046-4-2000 |
往復式內燃機.性能.第4部分:轉速調節 |
(Reciprocating internal combustion engines - Performance - Part 4: Speed governing (ISO 3046-4:1997)) |
| DIN ISO 3046-5-1982 |
往復式內燃機.性能.第5部分:扭轉振動 |
(Reciprocating internal combustion engines; performance; part V: torsional vibrations) |
| DIN ISO 3046-6-1996 |
往復式內燃機.性能.第6部分:超轉速防護裝置 |
(Reciprocating interal combustion engines - Performance - Part 6: Overspeed protection; identical with ISO 3046-6:1990) |
| DIN ISO 3046-7-1998 |
往復式內燃機性能.第7部分:發動機功率代碼 |
(Reciprocating internal combustion engines - Performance - Part 7: Codes for engine power (ISO 3046-7:1995)) |
| DIN ISO 3060-1994 |
棉纖維.平列纖維束斷裂強度的測定 |
Cotton fibres; determination of breaking tenacity of flat bundles (ISO 3060:1974) |
| DIN ISO 3070-2-2003 |
機床.臥式鏜銑床的試驗條件.精度試驗.第2部分:臺式機床 |
Machine tools - Test conditions for boring and milling machines with horizontal spindle; Testing of the accuracy - Part 2: Table-type machines (ISO 3070-2:1997) |
| DIN ISO 3070-3-2003 |
機床.臥式鏜銑床的試驗條件.精度試驗.第3部分:可拆卸、固定工件夾具平臺的板形機械 |
Machine tools - Test conditions for boring and milling machines with horizontal spindle; Testing of the accuracy - Part 3: Floor-type machines with detached, stationary work-holding table (ISO 3070-3:1997) |
| DIN ISO 3070-4-2003 |
機床.臥式鏜銑床的試驗條件.精度試驗.第4部分:可移動床身的多刀刨床 |
Machine tools - Test conditions for boring and milling machines with horizontal spindle; Test of the accuracy - Part 4: Planer type machines with movable column (ISO 3070-4:1998) |
| DIN ISO 3078-1988 |
造船.起貨絞車 |
Shipbuilding; cargo winches; identical with ISO 3078:1987 |
| DIN ISO 3166-2-2001 |
國家和他們的地區名的代碼表示法.第2部分:國家分區代碼 |
Codes for the representation of names of countries and their subdivisions - Part 2: Country subdivision code (ISO 3166-2:1998) |
| DIN ISO 3166-3-2001 |
信息和文獻.國家和他們的地區名的代碼表示法.第3部分:國家以前所用名的代碼 |
(Information and documentation - Codes for the representation of names of countries and their subdivisions - Part 3: Code for formerly used names of countries (ISO 3166-3:1999)) |
| DIN ISO 3206-1979 |
表面活性劑.鏈烷磺酸鹽的技術分析.鏈烷磺酸鹽含量的測定 |
(Surface active agents; analysis of technical alkane sulphonates, determination of alkane monosulphonates content) |
| DIN ISO 3208-1976 |
道路車輛.轎車內隆起部位的評定 |
(Road Vehicles; Evaluation of Protrusions inside Passenger Cars) |
| DIN ISO 3254-1994 |
造船和船舶結構.矩形舷窗用的鋼化玻璃 |
(Shipbuilding and marine structures; toughened safety glass panes for rectangular windows; identical with ISO 3254:1989) |
| DIN ISO 3260-1986 |
紙漿.氯耗量(除去木素程度)的測定 |
(Pulps; determiantion of chlorine consumption (degree of delignification); identical with ISO 3260, edition 1982) |
| DIN ISO 3285-1988 |
道路車輛.點火線圈安裝架 |
(Road vehicles; ignition coil mounting brackets; identical with ISO 3285, edition 1986) |
| DIN ISO 3297-2000 |
信息和文獻工作.國際標準連續出版物標準號(ISSN) |
(Information and documentation - International Standard Serial Number (ISSN) (ISO 3297:1998)) |
| DIN ISO 3302-1-1999 |
橡膠.產品公差.第1部分:尺寸公差 |
(Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:1996)) |
| DIN ISO 3302-2-1999 |
橡膠.產品公差.第2部分:幾何公差 |
(Rubber - Tolerances for products - Part 2: Geometrical tolerances (ISO 3302-2:1998)) |
| DIN ISO 3308-2000 |
卷煙煙霧常規分析器.定義和標準條件 |
(Routine analytical cigarette-smoking machine - Definitions and standard conditions (ISO 3308:2000)) |
| DIN ISO 3310-1-2001 |
試驗篩.技術要求和試驗.第1部分:金屬絲網布的試驗篩 |
(Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth (ISO 3310-1:2000)) |
| DIN ISO 3310-2-2001 |
試驗篩.技術要求和試驗.第2部分:穿孔金屬板的試驗篩 |
(Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated plates (ISO 3310-2:1999)) |
| DIN ISO 3310-3-1992 |
試驗用篩.技術要求和試驗.第3部分:電蝕孔板的試驗篩 |
(Test sieves; technical requirements and testing; test sieves of electroformed sheets; identical with ISO 3310-3:1990) |
| DIN ISO 3312-1990 |
燒結金屬材料和硬質合金.楊氏模量的測定 |
(Sintered metal materials and hardmetals; determination of young modulus; identical with ISO 3312:1987) |
| DIN ISO 3320-2001 |
流體動力系統和件.缸徑和活塞桿直徑.米制系列 |
(Fluid power systems and components - Cylinder bores and piston rod diameter - Metric series (ISO 3320:1987)) |
| DIN ISO 3322-2001 |
流體動力系統和件.油缸.公稱壓力 |
(Fluid power systems and components - Cylinders - Nominal pressures (ISO 3322:1985)) |
| DIN ISO 3323-1985 |
航空和航天.液壓件.表明已驗收的液流成分的標志 |
(Aircraft; hydraulic components; marking to indicate fluid for which component is approved) |
| DIN ISO 3326-1990 |
硬質合金.矯頑磁力(磁化)的測定 |
(Hardmetals; determination of (the magnetization) coercivity; identical with ISO 3326:1975) |
| DIN ISO 3327-1991 |
硬質合金.橫向斷裂強度的測定 |
(Hardmetals; determination of tranverse rupture strength; identical with ISO 3327:1982) |
| DIN ISO 3366-2000 |
涂敷磨料.磨料輥筒 |
(Coated abrasives - Abrasive rolls (ISO 3366:1999)) |
| DIN ISO 3369-1990 |
不滲透性燒結金屬材料和硬質合金.密度的測定 |
(Impermeable sintered metal materials and hardmetals; determination of density; identical with ISO 3369:1975) |
| DIN ISO 3384-2004 |
硫化或熱塑性橡膠.常溫和高溫下壓縮應力松弛的測定 |
|
| DIN ISO 34-1 Berichtigung 1-2005 |
硫化橡膠或熱塑性橡膠.撕裂強度的測定.第1部分:褲形、直角形和新月形試片 |
|
| DIN ISO 34-1 Berichtigung 1-2005 |
硫化橡膠或熱塑性橡膠.撕裂強度的測定.第1部分:褲形、直角形和新月形試片 |
|
| DIN ISO 34-1-2004 |
硫化橡膠或熱塑性橡膠.撕裂強度的測定.第1部分:褲形、直角形和新月形試片 |
|
| DIN ISO 3400-1998 |
卷煙.煙霧凝聚物中生物堿的測定.光譜測定法 |
(Cigarettes - Determination of alkaloids in smoke condensates - Spectrometric method (ISO 3400:1997)) |
| DIN ISO 3401-1998 |
卷煙.過濾嘴中生物堿滯留量的測定.光譜法 |
(Cigarettes - Determination of alkaloid retention by the filters - Spectrometric method (ISO 3401:1991)) |
| DIN ISO 3402-2000 |
煙草和煙草制品.狀態調節和試驗的大氣環境 |
(Tobacco and tobacco products - Atmosphere for conditioning and testing (ISO 3402:1999)) |
| DIN ISO 3412-1981 |
道路車輛.屏蔽和防水的火花塞及其連接.1型 |
(Screened and waterproof spark plug and its connection, type 1) |
| DIN ISO 3435-1979 |
連續機械裝卸設備.松散物料的分類和符號 |
(Continuous Mechanical Handling Equipment; Classification and Symbolization of Bulk Materials) |
| DIN ISO 3437-1977 |
道路車輛.碰撞事件中燃料泄漏的測定 |
(Road Vehicles; Determination of Fuel Leakage in the Event of a Collision) |
| DIN ISO 344-1982 |
紡織機械和輔助裝置.紡紗機.粗紗管 |
(Textile machinery and accessories; spinning machines; flyer bobbins) |
| DIN ISO 3451-2-1992 |
塑料.灰分的測定.第2部分:聚亞烷基對苯二酸酯(POLYALKYLENETEREPHTHALATES) |
(Plastics; determination of ash; polyalkylene terephthalates; identical with ISO 3451-2:1984) |
| DIN ISO 3451-3-1991 |
塑料.灰分的測定.第3部分:未增塑的醋酸纖維素 |
(Plastics; determination of ash; unplasticized cellulose acetate; identical with ISO 3451-3:1984) |
| DIN ISO 35-1997 |
天然橡膠膠乳濃縮物.機械穩定性測定 |
(Natural rubber latex concentrate - Determination of mechanical stability (ISO 35:1995)) |
| DIN ISO 3507-2002 |
實驗室玻璃器皿.比重瓶 |
(Laboratory glassware - Pyknometers (ISO 3507:1999)) |
| DIN ISO 3536-2001 |
道路車輛.玻璃材料的安全.詞匯 |
(Road vehicles - Safety glazing materials - Vocabulary (ISO 3536:1999)) |
| DIN ISO 3538-2003 |
道路車輛.安全玻璃窗材料.光學性能試驗方法 |
(Road vehicles - Safety glazing materials - Test methods for optical properties (ISO 3538:1997)) |
| DIN ISO 3539-1981 |
道路車輛.8型和10型有支柱的噴油咀架及9型和11型有固定平面的噴油嘴架 |
(Road vehicles; injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11) |
| DIN ISO 3547-1-2000 |
水平軸承.外襯套.第1部分:尺寸 |
(Plain bearings - Wrapped bushes - Part 1: Dimensions (ISO 3547-1:1999)) |
| DIN ISO 3547-2-2000 |
水平軸承.外襯套.第2部分:外徑和內徑試驗數據 |
(Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameter (ISO 3547-2:1999)) |
| DIN ISO 3547-3-2000 |
水平軸承.外襯套.第3部分:潤滑孔、潤滑槽和潤滑凹口 |
(Plain bearings - Wrapped bushes - Part 3: Lubrication holes, lubrication grooves and lubrication indentations (ISO 3547-3:1999)) |
| DIN ISO 3547-4-2000 |
水平軸承.外襯套.第4部分:材料 |
(Plain bearings - Wrapped bushes - Part 4: Materials (ISO 3547-4:1999)) |
| DIN ISO 3548-2001 |
滑動軸承.薄壁軸瓦.尺寸,公差和檢驗方法 |
(Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test (ISO 3548:1999)) |
| DIN ISO 355-1978 |
第1次補充 |
(Rolling Bearings; Metric Tapered Roller Bearings, Boundary Dimensions and Series Designations) |
| DIN ISO 3550-1-2005 |
卷煙.從端點測定煙草損失.第1部分:使用旋轉圓柱籠法 |
|
| DIN ISO 3553-2-1999 |
道路車輛.點火線圈和配電器的高電壓連接.第2部分:插頭型 |
(Road vehicles - High-tension connectors for ignition coils and distributors - Part 2: Plug-types (ISO 3553-2:1997)) |
| DIN ISO 3560-1976 |
道路車輛.正面固定障礙物碰撞檢驗方法 |
(Road Vehicles; Frontal Fixed Barrier Collision Test Method) |
| DIN ISO 3569-1978 |
連續機械裝卸設備.成組貨件的分類 |
(Continuous Mechanical Handling Equipment; Classification of Unit Loads) |
| DIN ISO 3583-1987 |
道路車輛.氣壓制動設備的壓力試驗連接件 |
(Road vehicles; pressure test connection for compressed-air pneumatic braking equipment; identical with ISO 3583, edition 1984) |
| DIN ISO 3585-1999 |
3.3硼硅酸鹽玻璃.特性 |
(Borosilicate glass 3.3 - Properties (ISO 3585:1998)) |
| DIN ISO 3586-1976 |
儀器.玻璃管和管件.檢驗.管理和使用的一般規則 |
(Glass plant, pipeline and fittings; general rules for testing, handling and use) |
| DIN ISO 362-2003 |
聲學.加速行駛的車輛發出的噪聲測量.工程法 |
(Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method (ISO 362:1998)) |
| DIN ISO 363-1994 |
紡織機械和附件.帶閉口環式鋼片綜的尺寸 |
(Textile machinery and accessories; flat steel healds with closed end loops; dimensions; identical with ISO 363:1992) |
| DIN ISO 364-1984 |
紡織機械和輔助裝置.帶綜框的織機用的雙鋼絲綜 |
(Textile machinery and accessories; twin wire healds for weaving machines with heald frames) |
| DIN ISO 365-1983 |
紡織機械和輔助裝置.提花織造用帶嵌入綜眼的雙鋼絲綜 |
(Textile machinery and accessories; twin wire healds with inset mail for Jacquard weaving) |
| DIN ISO 366-1-1990 |
紡織機械和附件.簧片 |
(Textile machinery and accessories; reeds; pitch bound reeds; dimensions; identical with ISO 366-1:1988) |
| DIN ISO 366-2-1990 |
紡織機械和附件.鋼筘.第2部分:具有扳式搖動桿的金屬筘.尺寸和標識 |
(Textile machinery and accessories; reeds; metal reeds with plate baulk; dimensions and designation; identical with ISO 366-2:1988) |
| DIN ISO 366-3-1990 |
紡織機械和附件.鋼筘.第3部分:具有雙彈簧的搖動桿金屬筘.尺寸和標識 |
(Textile machinery and accessories; reeds; metal reeds with double-spring baulk; dimensions and designation; identical with ISO 366-3:1988) |
| DIN ISO 366-4-1997 |
紡織機械和附件.織筘.第4部分:塑料織筘.尺寸和標識 |
(Textile machinery and accessories - Reeds - Part 4: Plastic bound metal reeds; dimensions and designation (ISO 366-4:1992)) |
| DIN ISO 368-1995 |
紡紗制備、紡紗和并紗(捻線)機械.錐度為1:38和1:64的環錠紡紗,并線和捻線錠子用沙管 |
(Spinning preparatory, spinning and doubling (twisting) machinery - Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64; identical with ISO 368:1991) |
| DIN ISO 3689-1994 |
紙和紙板.浸水后耐破裂強度的測定(ISO3689-1976修正) |
(Paper and board; determination of bursting strength after immersion in water; identical with ISO 3689:1983) |
| DIN ISO 3696-1991 |
實驗室分析用水.要求和檢驗 |
(Water for analytical laboratory use; specification and test methods; identical with ISO 3696:1987) |
| DIN ISO 3711-1996 |
色漆用鉻酸鉛顏料和鉻酸-鉬酸鉛顏料 |
(Lead chromate pigments and lead chromate-molybdate pigments - Specifications and methods of test (ISO 3711:1990)) |
| DIN ISO 3723-1987 |
液壓傳動.濾芯件.端向負荷試驗方法 |
(Hydraulic fluid power; filter elements; method for end load test; identical with ISO 3723, edition 1976) |
| DIN ISO 3724-1990 |
液壓傳動.濾芯件.流動疲勞特性的驗證 |
(Hydraulic fluid power; filter elements; verification of flow fatigue characteristics; identical with ISO 3724:1976) |
| DIN ISO 3730-1990 |
造船.錨泊絞盤 |
(Shipbuilding; mooring winches; identical with ISO 3730:1988) |
| DIN ISO 3731-2002 |
道路車輛.24V電氣系統的牽引車輛和掛車之間的電氣連接裝置.24S(增補)型7極連接器 |
(Road vehicles - Electrical connections between towing and towed vehicles with 12 V systems - 7 pole connector type 24 S (supplementary) (ISO 3731:1997)) |
| DIN ISO 3732-2002 |
道路車輛.24V電氣系統的牽引車輛和掛車之間的電氣連接裝置.12S(增補)型7極連接器 |
(Road vehicles - Electrical connections between towing and towed vehicles with 12 V systems - 7 pole connector type 12 S (supplementary) (ISO 3732:1997)) |
| DIN ISO 3733-2003 |
石油產品和瀝青材料.水含量的測定.蒸餾法 |
(Petroleum products and bituminous materials - Determination of water - Distillation method (ISO 3733:1999)) |
| DIN ISO 3738-1-1991 |
硬質合金.洛氏硬度試驗(A級).第1部分:試驗方法 |
(Hardmetals; Rockwell hardness test (scale A); test method; identical with ISO 3738-1:1982) |
| DIN ISO 3766-1996 |
建筑和土木工程制圖.鋼筋混凝土的加筋表示法 |
(Construction drawings - Simplified, representation of concrete reinforcement (ISO 3766:1995)) |
| DIN ISO 3771-1985 |
石油產品.堿總值的測定.高氯酸電位滴定法 |
(Petroleum products; total base number; perchloric acid potentiometric titration method) |
| DIN ISO 3779-1985 |
道路車輛.車輛識別號碼(VIN) |
(Road vehicles; vehicle identification number (VIN)) |
| DIN ISO 3780-1985 |
道路車輛.各國制造廠家標志符號(WMI)代碼 |
(Road vehicles; world manufacturer identifier (WMI) code) |
| DIN ISO 3781-1994 |
紙和紙板.浸水后抗張強度的測定 |
(Paper and board - Determination of tensile strength after immersion in water; identical with ISO 3781:1983) |
| DIN ISO 3803-1990 |
道路車輛.制動設備的液壓試驗連接件 |
(Road vehicles hydraulic pressure test connection for braking equipment; identical with ISO 3803:1984) |
| DIN ISO 3808-1-1981 |
無屏蔽高電壓點火電纜.第1部分:尺寸、一般要求和試驗方法 |
(Unscreened high-tension ignition cables - Part 1: Dimensions, general requirements and test methods) |
| DIN ISO 3808-2-1986 |
道路車輛.無屏蔽高壓點火電纜.電纜的分類、類型、應用試驗和特殊要求 |
(Road vehicles - Unscreened high-tension ignition cables - Cable classes, types, applicable tests and special requirements; Identical with ISO 3808/2, edition 1980 (as per 1985)) |
| DIN ISO 3826-1996 |
人體血液和血液成分用可折疊塑料容器 |
(Plastics collapsible containers for human blood and blood components (ISO 3826:1993)) |
| DIN ISO 3828-1989 |
造船和海上建筑物.甲板機械.術語 |
(Shipbuilding and marine structures; deck machinery; vocabulary; identical with ISO 3828:1984) |
| DIN ISO 384-1978 |
實驗室玻璃器皿.測容積的玻璃器皿的設計和構造原理 |
(Laboratory Glassware; Principes of Design and Construction of Volumetric Glassware) |
| DIN ISO 3841-1983 |
石油蠟.熔點(冷卻曲線)的測定 |
(Petroleum waxes; determination of melting point (cooling curve)) |
| DIN ISO 3856-1-1985 |
色漆和清漆.“可溶性”金屬含量的測定.第1部分:鉛含量的測定 |
(Paints and varnishes; determination of “soluble“ metal content; determination of lead content; identical with ISO 3856/1, edition 1984) |
| DIN ISO 3856-2-1986 |
色漆和清漆.“可溶性”金屬含量的測定.第2部分:銻含量的測定 |
(Paints and varnishes; determination of “soluble“ metal content; determination of antimony content; identical with ISO 3856/2, edition 1984) |
| DIN ISO 3856-3-1986 |
色漆和清漆.“可溶性”金屬含量的測定.第3部分:鋇含量的測定 |
(Paints and varnishes; determination of “soluble“ metal content; determination of barium content; identical with ISO 3856/3, edition 1984) |
| DIN ISO 3856-4-1986 |
色漆和清漆.“可溶性”金屬含量的測定.第4部分:鎘含量的測定 |
(Paints and varnishes; determination of “soluble“ metal content; determination of cadmium content; identical with ISO 3856/4, edition 1984) |
| DIN ISO 3856-5-1986 |
色漆和清漆.“可溶性”金屬含量的測定.第5部分:液體色漆或粉狀色漆的顏料中六價鉻含量的測定 |
(Paints and varnishes; determination of “soluble“ metal content; determination of hexavalent chromium content of the pigment portion of liquid paints or of paints in powder form; identical with ISO 3856/5, edition 1984) |
| DIN ISO 3856-6-1986 |
色漆和清漆.“可溶性”金屬含量的測定.第6部分:色漆液體中鉻總含量的測定 |
(Paints and varnishes; determination of “soluble“ metal content; determination of total chromium content of the liquid portion; identical with ISO 3856/6, edition 1984) |
| DIN ISO 3865-2001 |
硫化或熱塑橡膠.與有機材料接觸污染的試驗方法 |
(Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material (ISO 3865:1997)) |
| DIN ISO 3872-1981 |
印刷技術.單張紙印刷機.選擇系列 |
(Graphic technology; sheet-fed printing machines; range of sizes) |
| DIN ISO 3878-1991 |
硬質合金.維氏硬度試驗 |
(Hardmetals; Vickers hardness test; identical with ISO 3878:1983) |
| DIN ISO 3883-1978 |
辦公和數據技術.地址主頁的行和字符容量 |
(Office Machines; Line and Character Capacity of Address Masters) |
| DIN ISO 3901-2002 |
信息和文獻工作.國際標準記錄代碼(ISRC) |
(Information and documentation - International Standard Recording Code (ISRC) (ISO 3901:2001)) |
| DIN ISO 3903-1994 |
造船和船舶結構.船舶常用的矩形窗戶 |
(Shipbuilding and marine structures; ships` ordinary rectangular windows; identical with ISO 3903:1993) |
| DIN ISO 3907-1991 |
硬質合金.碳總含量的測定.重量分析法 |
(Hardmetals; determination of total carbon content; gravimetric method; identical with ISO 3907:1985) |
| DIN ISO 3908-1991 |
硬質合金.不溶(游離)性碳含量的測定.重量分析法 |
(Hardmetals; determination of insoluble (free) carbon content; gravimetric method; identical with ISO 3908:1985) |
| DIN ISO 3909-1994 |
硬質合金.鈷含量的測定.電位滴定法 |
(Hardmetals; determination of cobalt; potentiometric method; identical with ISO 3909:1976) |
| DIN ISO 3914-1-1996 |
紡織機械和輔助裝置.圓筒形紗管.第1部分:推薦的主要尺寸 |
(Textile machinery and accessories - Cylindrical tubes - Part 1: Recommended main dimensions (ISO 3914-1:1994)) |
| DIN ISO 3914-2-1996 |
紡織機械和輔助裝置.圓筒形紗管.第2部分:開端紡紗機用紗管 |
(Textile machinery and accessories - Cylindrical tubes - Part 2: Tubes for open-end spinning machines (ISO 3914-2:1994)) |
| DIN ISO 3914-3-1996 |
紡織機械和輔助裝置.圓筒形紗管.第3部分:扁絲紗管的尺寸,公差和命名 |
(Textile machinery and accessories - Cylindrical tubes - Part 3: Dimensions, tolerances and designation of tubes for tape yarns (ISO 3914-3:1994)) |
| DIN ISO 3914-4-1996 |
紡織機械和附件.圓柱形紗管.第4部分:變形紗線用紗管的尺寸,公差和命名 |
(Textile machinery and accessories - Cylindrical tubes - Part 4: Dimensions, tolerances and designation of tubes for textured yarns (ISO 3914-4:1994)) |
| DIN ISO 3914-5-1996 |
紡織機械和附件.圓柱形紗管.第5部分:連續紡絲拉伸合成長絲紗管的尺寸,公差和命名 |
(Textile machinery and accessories - Cylindrical tubes - Part 5: Dimensions. tolerances and designation of tubes for continuous spin-drawn synthetic filament yarns (ISO 3914-5:1994)) |
| DIN ISO 3914-6-1996 |
紡織機械和附件.圓柱形紗管.第6部分:在絡紗和加捻中交叉卷繞卷裝管的尺寸,公差和命名 |
(Textile machinery and accessories - Cylindrical tubes - Part 6: Dimensions, tolerances and designation of tubes for cross-wound packages in winding and twisting (ISO 3914-6:1994)) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com