標準號 |
中文名稱 |
英文名稱 |
| ISO 4009-2000 |
商用車輛.牽引車和掛車間電連接和氣動連接的定位 |
(Commercial vehicles - Location of electrical and pneumatic connections between towing vehicles and trailers) |
| ISO 4010-1998 |
柴油發動機.針?biāo)ㄐ蜏髽?biāo)定噴嘴 |
(Diesel engines - Calibrating nozzle, delay pintle type) |
| ISO 4012-1978 |
混凝土.試樣抗壓強度的測定 |
(Concrete; Determination of compressive strength of test specimens) |
| ISO 4013-1978 |
混凝土.試樣抗彎強度的測定 |
(Concrete; Determination of flexural strength of test specimens) |
| ISO 4014-1999 |
六角頭螺栓.產品等級A和B |
(Hexagon head bolts - Product grades A and B) |
| ISO 4015-1979 |
六角頭螺栓.產品等級B.光桿部分:(光桿直徑= 螺紋中徑) |
(Hexagon head bolts; Product grade B; Reduced shank (Shank diameter = pitch diameter)) |
| ISO 4016-1999 |
六角頭螺栓.產品等級C |
(Hexagon head bolts - Product grade C) |
| ISO 4017-1999 |
六角頭螺釘.產品等級 A和B |
(Hexagon head screws - Product grades A and B) |
| ISO 4018-1999 |
六角頭螺釘.產品等級C |
(Hexagon head screws - Product grade C) |
| ISO 4019-2001 |
結構鋼.冷精軋中空型材.尺寸和截面特性 |
(Structural steels - Cold-formed, welded, structural hollow sections - Dimensions and sectional properties) |
| ISO 4020-2001 |
道路車輛.柴油發動機用燃油濾清器.試驗方法 |
(Road vehicles - Fuel filters for diesel engines - Test methods) |
| ISO 4021-1992 |
液壓傳動.微粒污染分析.從工作系統管道中液體樣品的提取 |
(Hydraulic fluid power; particulate contamination analysis; extraction of fluid samples from lines of an operating system) |
| ISO 4022-1987 |
滲透性燒結金屬材料.液體滲透性的測定 |
(Permeable sintered metal materials; Determination of fluid permeability) |
| ISO 4023-1991 |
輸送蒸汽用橡膠軟管.試驗方法 |
(Rubber hoses for steam; test methods) |
| ISO 4024-1992 |
道路車輛.點火線圈.低電壓電纜連接 |
(Road vehicles; ignition coils; low-tension cable connections) |
| ISO 4026-1993 |
六角凹頭平端定位螺釘 |
(Hexagon socket set screws with flat point) |
| ISO 4026-2003 |
內六角平端定位螺釘 |
|
| ISO 4027-1993 |
六角凹頭錐端定位螺釘 |
(Hexagon socket set screws with cone point) |
| ISO 4027-2003 |
內六角錐頭定位螺釘 |
|
| ISO 4028-1993 |
六角凹頭制動端定位螺釘 |
(Hexagon socket set screws with dog point) |
| ISO 4028-2003 |
內六角制動端定位螺釘 |
|
| ISO 4029-1993 |
六角凹頭圓端止動螺釘 |
(Hexagon socket set screws with cup point) |
| ISO 4029-2003 |
內六角圓端定位螺釘 |
|
| ISO 4030-1983 |
道路車輛.車輛識別號碼(VIN).位置和固定 |
(Road vehicles; Vehicle identification number (VIN); Location and attachment) |
| ISO 4032-1999 |
1型六角螺母.產品等級A和B |
(Hexagon nuts, style 1 - Product grades A and B) |
| ISO 4033-1999 |
2型六角螺母.產品等級A和B |
(Hexagon nuts, style 2 - Product grades A and B) |
| ISO 4034-1999 |
六角螺母.產品等級C |
(Hexagon nuts - Product grade C) |
| ISO 4035-1999 |
六角薄螺母(倒角).產品等級A和B |
(Hexagon thin nuts (chamfered) - Product grades A and B) |
| ISO 4036-1999 |
六角薄螺母(不倒角).產品等級B |
(Hexagon thin nuts (unchamfered) - Product grade B) |
| ISO 4037-1-1996 |
校準劑量計和劑量強度計及測定充作為光子函數的靈敏度用的X 和γ標準輻射.第1部分:輻射性產生法 |
(X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 1: Radiation characteristics production methods) |
| ISO 4037-2-1997 |
校準劑量計和劑量強度計及測定充作為光子函數的靈敏度用的X 和γ標準放射源.能量范圍在8KeV-1,3MeV和4MeV-9 |
(X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 2: Dosimetry for radiation protection over the energy ranges 8 keV to 1,3 MeV and 4 MeV to 9 MeV) |
| ISO 4037-3-1999 |
校準劑量計和劑量強度計及測定作為光子函數的靈敏度用的X和γ參考輻射.第3部分:作為對能量函數和入射角反應 |
(X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of |
| ISO 4037-4-2004 |
校準劑量?jī)x和劑量率儀及確定其光子能量響應的Χ和γ參考輻射.第4部分:低能X參考輻射場中場所劑量計和個人劑量計的校準 |
|
| ISO 4037-4-2004 |
校準劑量?jī)x和劑量率儀及確定其光子能量響應的Χ和γ參考輻射.第4部分:低能X參考輻射場中場所劑量計和個人劑量計的校準 |
|
| ISO 4038-1996 |
道路車輛.液壓制動系統.導管、螺紋孔、陽螺紋配件和軟管管端配件 |
(Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings) |
| ISO 4039-1-1998 |
道路車輛.氣胎制動系統.第1部分:有平面密封表面的管、陽螺紋管接頭和螺紋孔 |
(Road vehicles - Pneumatic braking systems - Part 1: Pipes, male fittings and tapped holes with facial sealing surface) |
| ISO 4039-2-1998 |
道路車輛.氣胎制動系統.第2部分:有錐形密封表面的管、陽螺紋管接頭和螺紋孔 |
(Road vehicles - Pneumatic braking systems - Part 2: Pipes, male fittings and tapped holes with conical sealing surface) |
| ISO 404-1992 |
鋼和鋼制品.總交貨技術條件 |
(Steel and steel products; general technical delivery requirements) |
| ISO 4040-2001 |
道路車輛.機動車的手控裝置、指示器和信號裝置的位置 |
(Road vehicles - Location of hand controls, indicators and tell-tales in motor vehicles) |
| ISO 4041-1978 |
旋轉鉆井設備.旋轉式軟管 |
(Rotary drilling equipment; Rotary hoses) |
| ISO 4042-1999 |
緊固件.電鍍層 |
(Fasteners - Electroplated coatings) |
| ISO 4043-1998 |
同聲翻譯移動間.一般特點和設備 |
(Mobile booths for simultaneous interpretation - General characteristics and equipment) |
| ISO 4044-1977 |
皮革.化學試驗試樣品的制備 |
(Leather; Preparation of chemical test samples) |
| ISO 4045-1977 |
皮革.pH值的測定 |
(Leather; Determination of pH) |
| ISO 4046-1-2002 |
紙、紙板、紙漿及其術語.詞匯.第1部分:按字母排列的索引 |
(Paper, board, pulps and related terms - Vocabulary - Part 1: Alphabetical index) |
| ISO 4046-2-2002 |
紙、紙板、紙漿及其術語.詞匯.第2部分:打漿術語 |
(Paper, board, pulps and related terms - Vocabulary - Part 2: Pulping terminology) |
| ISO 4046-3-2002 |
紙、紙板、紙漿及其術語.詞匯.第3部分:造紙術語 |
(Paper, board, pulps and related terms - Vocabulary - Part 3: Paper-making terminology) |
| ISO 4046-4-2002 |
紙、紙板、紙漿及其術語.詞匯.第4部分:紙和紙板的等級和加工產品 |
(Paper, board, pulps and related terms - Vocabulary - Part 4: Paper and board grades and converted products) |
| ISO 4046-5-2002 |
紙、紙板、紙漿及其術語.詞匯.第5部分:紙漿、紙和紙板的特性 |
(Paper, board, pulps and related terms - Vocabulary - Part 5: Properties of pulp, paper and board) |
| ISO 4047-1977 |
皮革.硫酸化總灰分和水不溶性硫酸化灰分的測定 |
(Leather; Determination of sulphated total ash and sulphated water-insoluble ash) |
| ISO 4048-1977 |
皮革.二氯甲烷可溶物質的測定 |
(Leather; Determination of matter soluble in dichloromethane) |
| ISO 4049-2000 |
牙科學.高聚物基填充材料、復原材料和泥封材料 |
(Dentistry - Polymer-based filling, restorative and luting materials) |
| ISO 4050-1977 |
造船.內河船舶.“萊茵“ 型和霍爾型(“RNINE“ AND HALL`S)無錨叉錨 |
(Shipbuilding; Inland vessels; “Rhine“ and Hall`s stockless anchors) |
| ISO 4051-1977 |
造船.內河船舶.舵機.扭矩值 |
(Shipbuilding; Inland vessels; Steering gear; Values of torques) |
| ISO 4052-1983 |
咖啡.咖啡堿含量的測定(參考法) |
(Coffee; Determination of caffeine content (Reference method)) |
| ISO 4053-1-1977 |
管道中氣體流量測量.示蹤法.第1部分:總則 |
(Measurement of gas flow in conduits; Tracer methods; Part I : General) |
| ISO 4053-4-1978 |
管道中氣體流量測量.示蹤法.第4部分:用放射性示蹤物的移動時間法 |
(Measurement of gas flow in conduits; Tracer methods; Part IV : Transit time method using radioactive tracers) |
| ISO 4056-1978 |
聚乙烯(PE)管和配件.按公稱比重和熔體液流動指數為基礎的聚乙烯的表示方法 |
(Polyethylene (PE) pipes and fittings; Designation of polyethylene, based on nominal density and melt flow index) |
| ISO 4057-1986 |
信息處理.63字節/mm(1600字節/in)的位相編碼式寬6.3mm(0.25in)盒式磁帶的數據交換 |
(Information processing; Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1 600 bpi) phase-encoded) |
| ISO 4058-1977 |
鎂和鎂合金.鎳含量的測定.丁二酮肟光度法 |
(Magnesium and its alloys; Determination of nickel; Photometric method using dimethylglyoxime) |
| ISO 4059-1978 |
聚乙烯(PE)管.管道連接的機械系統壓降.試驗方法和要求 |
(Polyethylene (PE) pipes; Pressure drop in mechanical pipe-jointing systems; Method of test and requirements) |
| ISO 406-1987 |
技術制圖.線值和角值公差 |
(Technical drawings; Tolerancing of linear and angular dimensions) |
| ISO 4062-1977 |
口述記錄設備.符號 |
(Dictation equipment; Symbols) |
| ISO 4063-1998 |
焊接及有關工藝.工藝和參考值的命名 |
(Welding and allied processes - Nomenclature of processes and reference numbers) |
| ISO 4064-1-1993 |
封閉管道中水流量的測量.冷飲用水測量計.第1部分:規范 |
(Measurement of water flow in closed conduits; meters for cold potable water; part 1: specifications) |
| ISO 4064-2-2001 |
封閉管道中水流量的測量.飲用冷水測量計.第2部分:安裝要求和選擇 |
(Measurement of water flow in closed conduits - Meters for cold potable water - Part 2: Installation requirements and selection) |
| ISO 4064-3-1999 |
封閉管道中水流量的測量.飲用冷水測量計.第3部分:試驗方法和設備 |
(Measurement of water flow in closed conduits - Meters for cold potable water - Part 3: Test methods and equipment) |
| ISO 4065-1996 |
熱塑性塑料管.通用管壁厚度表 |
(Thermoplastic pipes - Universal wall thickness table) |
| ISO 4066-1994 |
建筑制圖.增強鋼筋棒料表 |
(Construction drawings - Bar scheduling) |
| ISO 4067-1-1984 |
技術制圖.安裝.第1部分:衛生管道系統,供熱、通風和導管的圖形符號 |
(Technical drawings; Installations; Part 1 : Graphical symbols for plumbing, heating, ventilation and ducting) |
| ISO 4067-2-1980 |
建筑和土木工程制圖.安裝.第2部分:衛生設施的簡化表示法 |
(Building and civil engineering drawings; Installations; Part 2 : Simplified representation of sanitary appliances) |
| ISO 4067-6-1985 |
技術制圖.安裝.第6部分:供水和地下排水系統的圖形符號 |
(Technical drawings; Installations; Part 6 : Graphical symbols for supply water and drainage systems in the ground) |
| ISO 4069-1977 |
建筑和土木工程制圖.剖面圖和視圖部分的表示法.一般原則 |
(Building and civil engineering drawings; Representation of areas on sections and views; General principles) |
| ISO 407 Technical Corrigendum 1-1999 |
醫療用小型氣瓶.軛式閥連接器.技術勘誤1 |
(Small medical gas cylinders - Pin-index yoke-type valve connections; Technical Corrigendum 1) |
| ISO 407-1991 |
醫療用小型氣瓶.軛式閥連接器 |
(Small medical gas cylinders; pin-index yoke-type valve connections) |
| ISO 407-2004 |
小型醫用氣瓶.針導軛式閥連接 |
|
| ISO 407-2004 |
小型醫用氣瓶.針導軛式閥連接 |
|
| ISO 4072-1982 |
袋裝生咖啡豆.取樣 |
(Green coffee in bags; Sampling) |
| ISO 4073-1980 |
牙科設備.牙科治療室設備項目.識別體系 |
(Dental equipment; Items of dental equipment at the working place; Identification system) |
| ISO 4074 Technical Corrigendum 1-2003 |
天然乳膠避孕套.要求和試驗方法.技術勘誤1 |
(Natural latex rubber condoms - Requirements and test methods; Technical Corrigendum 1) |
| ISO 4074 Technical Corrigendum 1-2003 |
天然乳膠避孕套.要求和試驗方法.技術勘誤1 |
|
| ISO 4074-12-1980 |
橡膠陰莖套.第12部分:儲存 |
(Rubber condoms; Part 12 : Storage) |
| ISO 4074-2002 |
天然乳膠避孕套.要求和試驗方法 |
(Natural latex rubber condoms - Requirements and test methods) |
| ISO 4079-1-2001 |
橡膠軟管和軟管組件.織物增強的液壓型.規范:第1部分:油基液體用 |
(Rubber hoses and hose assemblies - Textile-reinforced hydraulic types; Specification - Part 1: Oil-based fluid applications) |
| ISO 4080 Technical Corrigendum 1-1997 |
橡膠和塑料軟管及軟管組件.氣體滲透性的測定.技術勘誤1 |
(Rubber and plastic hoses and hose assemblies - Determination of permeability to gas; Technical corrigendum 1) |
| ISO 4080 Technical Corrigendum 2-1998 |
橡膠和塑料軟管和軟管組件.透氣性的測定.技術勘誤2 |
(Rubber and plastics hoses and hose assemblies - Determination of permeability to gas; Technical Corrigendum 2) |
| ISO 4080-1991 |
橡膠和塑料軟管及軟管組件.透氣性測定 |
(Rubber and plastic hoses and hose assemblies; determination of permeability to gas) |
| ISO 4081-1987 |
橡膠.用于小汽車和輕型商業車輛的冷卻液軟管和管道系統.規范 |
(Rubber; Coolant hoses and tubing for use on private cars and light commercial vehicles; Specification) |
| ISO 4082-1981 |
道路車輛.汽車.閃光裝置 |
(Road vehicles; Motor vehicles; Flasher units) |
| ISO 4084-1977 |
飛機.可檢修的接觸器(非氣密封接).性能要求 |
(Aircraft; Repairable contactors (not hermetically sealed); Performance requirements) |
| ISO 4085-1979 |
造船.內河航行.旋轉式懸臂起重機 |
(Shipbuilding; Inland navigation; Swing derricks) |
| ISO 4086-2001 |
道路車輛.90號半掛車專用輪中樞銷.互換性 |
(Road vehicles - 90 semi-trailer fifth wheel kingpin - Interchangeability) |
| ISO 4087-1991 |
縮微攝影技術.存檔的35mm縮微膠卷的報紙縮微照相 |
(Micrographics; microfilming of newspapers for archival purposes on 35 mm microfilm) |
| ISO 4089-1979 |
造船.內河航行.貨艙蓋的密封橡膠 |
(Shipbuilding; Inland navigation; Sealing rubber for covers of cargo hatches) |
| ISO 4090-2001 |
攝影.醫療放射照相用X光底片盒/屏蔽物/膠片和硬拷貝成像膠片.尺寸和規范 |
(Photography - Medical radiographic cassettes/screens/films and hard-copy imaging films - Dimensions and specifications) |
| ISO 4091 AMD 1-1997 |
道路車輛.牽引車和掛車間電氣連接用連接器.性能要求和試驗方法.修改件1 |
(Road vehicles - Connectors for electrical connections between towing vehicles and trailers - Test methods and performance requirements; Amendment 1) |
| ISO 4091-2003 |
道路車輛.牽引車和掛車之間電氣連接用連接器.定義、試驗和要求 |
(Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions, tests and requirements ) |
| ISO 4091-2003 |
道路車輛.牽引車和掛車之間電氣連接用連接器.定義、試驗和要求 |
|
| ISO 4092 Technical Corrigendum 1-1991 |
道路車輛.摩托車用診斷系統.詞匯.技術勘誤1 |
(Road vehicles; diagnostic systems for motor vehicles; vocabulary; technical corrigendum 1) |
| ISO 4092-1988 |
道路車輛.汽車故障診斷系統.詞匯 |
(Road vehicles; diagnostic systems for motor vehicles; vocabulary) |
| ISO 4093-1999 |
柴油發動機.噴油泵.試驗用高壓管 |
(Diesel engines - Fuel injection pumps - High-pressure pipes for testing) |
| ISO 4094-1991 |
紙、紙板和紙漿.試驗裝置的國際標定.標準化和法定實驗室的驗收和委任 |
(Paper, board and pulps; international calibration of testing apparatus; nomination and acceptance of standardizing and authorized laboratories) |
| ISO 4095-1998 |
航空航天.十二角傳動.扳手外形.米制系列 |
(Aerospace - Bihexagonal drives - Wrenching configuration - Metric series) |
| ISO 4097-2000 |
乙丙二烯橡膠(三乙丙橡膠EPDM).評定程序 |
(Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure) |
| ISO 4100-1980 |
道路車輛.各國零件制造廠家標志符號(WPMI)代碼 |
(Road vehicles; World parts manufacturer identifier (WPMI) code) |
| ISO 4101-1983 |
起重機用鋼絲繩的拉制鋼絲.規范 |
(Drawn steel wire for elevator ropes; Specifications) |
| ISO 4102-1984 |
作物保護設備.噴霧機.連接螺紋 |
(Equipment for crop protection; Sprayers; Connection threading) |
| ISO 4103-1979 |
混凝土.稠度分類 |
(Concrete; Classification of consistency) |
| ISO 4105-1978 |
紡織機械和附件.彈性梳理針布的金屬絲 |
(Textile machinery and accessories; Wires for flexible card clothings) |
| ISO 4106-1993 |
摩托車.發動機試驗規程.凈功率 |
(Motorcycles; engine test code; net power) |
| ISO 4106-2004 |
摩托車.發動機試驗規程.凈功率 |
|
| ISO 4107-1998 |
商用車輛.輪轂附件的尺寸 |
(Commercial vehicles - Wheel hub attachment dimensions) |
| ISO 4108-1980 |
混凝土.試樣抗拉裂強度的測定 |
(Concrete; Determination of tensile splitting strength of test specimens) |
| ISO 4109-1980 |
新攪拌的混凝土.稠度的測定.坍塌試驗 |
(Fresh concrete; Determination of the consistency; Slump test) |
| ISO 4110-1979 |
新攪拌的混凝土.稠度的測定.威伯(Vebe)試驗 |
(Fresh concrete; Determination of the consistency; Vebe test) |
| ISO 4111-1979 |
新攪拌的混凝土.稠度的測定.壓實度等級(壓實指數) |
(Fresh concrete; Determination of consistency; Degree of compactibility (Compaction index)) |
| ISO 4112-1990 |
谷類和豆類.糧倉糧食貯存溫度的測定 |
(Cereals and pulses; guidance on measurement of the temperature of grain stored in bulk) |
| ISO 4113-1988 |
道路車輛.柴油機噴油設備的校泵油 |
(Road vehicles; calibration fluid for diesel injection equipment) |
| ISO 4115-1997 |
空中貨運設備.空中/地面用托盤網 |
(Air cargo equipment - Air/land pallet nets) |
| ISO 4116-1986 |
空中貨運設備.與飛機成組貨件裝置相配合的地面設備要求 |
(Air cargo equipment; Ground equipment requirements for compatibility with aircraft unit load devices) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com