標準號 |
中文名稱 |
英文名稱 |
| ISO 15616-3-2003 |
高質量焊接和切割用CO2激光射線機的驗收試驗.第3部分:氣體流量和壓力測量儀的校正 |
|
| ISO 15618-1-2001 |
水下焊接的焊工資格測試.第1部分:超高壓濕焊的潛水焊工 |
Qualification testing of welders for underwater welding - Part 1: Diver-welders for hyperbaric wet welding |
| ISO 15618-2-2001 |
水下焊接的焊工資格測試.第2部分:超高壓干焊的潛水焊工和焊接操作員 |
Qualification testing of welders for underwater welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding |
| ISO 1562-1993 |
牙科用鑄金合金 |
Dental casting gold alloys |
| ISO 1562-2004 |
牙科.鑄金合金 |
|
| ISO 15620-2000 |
焊接.金屬材料的摩擦焊接 |
Welding - Friction welding of metallic materials |
| ISO 15621-1999 |
吸尿輔助器.評定的一般指南 |
Urine-absorbing aids - General guidance on evaluation |
| ISO 15622-2002 |
運輸信息和控制系統.自適配式車速控制系統.性能要求和試驗程序 |
Transport information and control systems - Adaptive Cruise Control systems - Performance requirements and test procedures |
| ISO 15623-2002 |
運輸信息和控制系統.前方車輛碰撞警告系統.性能要求和試驗程序 |
Transport information and control systems - Forward vehicle collision warning systems - Performance requirements and test procedures |
| ISO 15629-2002 |
物料搬運托盤.新托盤組件和用過的木制平托盤檢修用緊固件質量 |
Pallets for material handling - Quality of fasteners for assembly of new and repair of used, flat, wooden pallets |
| ISO 1563-1990 |
藻酸鹽牙印模材料 |
Dental alginate impression material |
| ISO 15630-1-2002 |
混凝土的鋼筋和預應力用鋼.試驗方法.第1部分:加筋棒、鋼絲桿和鋼絲 |
Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire |
| ISO 15630-2-2002 |
混凝土的鋼筋和預應力用鋼.試驗方法.第2部分:焊接纖維 |
Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric |
| ISO 15630-3-2002 |
混凝土的鋼筋和預應力用鋼.試驗方法.第3部分:預應力鋼 |
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel |
| ISO 15632-2002 |
微光束分析.帶半導體探測器的能量發散X射線分光儀的儀器規范 |
Microbeam analysis - Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors |
| ISO 15635-2001 |
涂覆磨料.風門盤 |
Coated abrasives - Flap discs |
| ISO 15636-2003 |
剛紙研磨盤用備用墊片 |
(Back-up pads for vulcanized fibre discs) |
| ISO 15636-2003 |
剛紙研磨盤用備用墊片 |
|
| ISO 15637-1-2002 |
圓柱形研磨套筒支承夾具.第1部分:手動砂輪機用帶柄的支承夾具 |
Holding fixtures of cylindrical abrasive sleeves - Part 1: Holding fixtures with shank for hand held grinding machines |
| ISO 15637-2-2002 |
圓柱形研磨套筒支承夾具.第2部分:固定機械的支承夾具 |
Holding fixtures of cylindrical abrasive sleeves - Part 2: Holding fixtures for stationary machines |
| ISO 1564-1995 |
水化牙科瓊脂基印模材料 |
Dental aqueous impression materials based on agar |
| ISO 15641-2001 |
高速切削機床用銑刀.安全要求 |
Milling cutters for high speed machining - Safety requirements |
| ISO 15642-2003 |
道路建筑和維護設備.瀝青混合設備.術語和商業規范 |
(Road construction and maintenance equipment - Asphalt mixing plants - Terminology and commercial specifications) |
| ISO 15642-2003 |
道路建筑和維護設備.瀝青混合設備.術語和商業規范 |
|
| ISO 15643-2002 |
道路建筑和養護設備.瀝青粘合劑布料/噴料機.術語和商業規范 |
Road construction and maintenance equipment - Bituminous binder spreaders/sprayers - Terminology and commercial specifications |
| ISO 15644-2002 |
道路建筑和維修設備. 碎屑延輾機.術語和商業規范 |
Road construction and maintenance equipment - Chippings spreaders - Terminology and commercial specifications |
| ISO 15645-2002 |
道路建筑和維修設備. 路面切槽機.術語和商業規范 |
Road construction and maintenance equipment - Road milling machinery - Terminology and commercial specifications |
| ISO 15647-2004 |
核能.六氟化鈾的同位素分析.雙標準氣源質譜法 |
|
| ISO 15648-2004 |
黃油.鹽含量的測定.電位測量法 |
|
| ISO 15649-2001 |
石油和天然氣工業.管線 |
Petroleum and natural gas industries - Piping |
| ISO 15652-2003 |
小艇.小型噴水推進艇艙內用遙控操縱系統 |
(Small craft - Remote steering systems for inboard mini jet boats) |
| ISO 15652-2003 |
小艇.小型噴水推進艇艙內用遙控操縱系統 |
|
| ISO 15652-2003 |
小艇.小型噴水推進艇艙內用遙控操縱系統 |
|
| ISO 15654-2004 |
傳輸精度滾子鏈的疲勞試驗方法 |
|
| ISO 15654-2004 |
傳輸精度滾子鏈的疲勞試驗方法 |
|
| ISO 15663-1-2000 |
石油和天然氣工業.壽命周期價格.第1部分:方法學 |
Petroleum and natural gas industries - Life cycle costing - Part 1: Methodology |
| ISO 15663-2-2001 |
石油和天然氣工業.壽命周期價格.第2部分:方法學的應用和計算方法指南 |
Petroleum and natural gas industries - Life cycle costing - Part 2: Guidance on application of methodology and calculation methods |
| ISO 15663-3-2001 |
石油和天然氣工業.生命周期成本計算.第3部分:實施導則 |
Petroleum and natural gas industries - Life-cycle costing - Part 3: Implementation guidelines |
| ISO 15664-2001 |
聲學.露天設備噪聲控制設計程序 |
Acoustics - Noise control design procedures for open plant |
| ISO 15665 Technical Corrigendum 1-2004 |
聲學.管道、閥門和法蘭的隔音.技術勘誤1 |
|
| ISO 15665-2003 |
聲學.管、閥和法蘭隔聲 |
(Acoustics - Acoustic insulation for pipes, valves and flanges) |
| ISO 15665-2003 |
聲學.管、閥和法蘭隔聲 |
|
| ISO 15667-2000 |
聲學.由外殼和艙室控制噪聲的指南 |
Acoustics - Guidelines for noise control by enclosures and cabins |
| ISO 15668-1999 |
銀行業務.安全文件傳輸(零售) |
Banking - Secure file transfer (retail) |
| ISO 1567 AMD 1-2003 |
牙科學.義齒基托聚合物.修改件1 |
(Dentistry - Denture base polymers; Amendment 1) |
| ISO 1567 AMD 1-2003 |
牙科學.義齒基托聚合物.修改件1 |
|
| ISO 1567-1999 |
牙科學.假牙基料聚合物 |
Dentistry - Denture base polymers |
| ISO 15671-2000 |
橡膠和橡膠添加劑.用自動分析儀測定硫的總含量 |
Rubber and rubber additives - Determination of total sulfur content using an automatic analyser |
| ISO 15672-2000 |
橡膠和橡膠添加劑.用自動分析儀測定氮的總含量 |
Rubber and rubber additives - Determination of total nitrogen content using an automatic analyser |
| ISO 15674-2001 |
心臟脈管植入物和人工器官.硬殼式心臟/靜脈存儲系統(有/無過濾器)和軟靜脈儲血袋 |
Cardiovascular implants and artificial organs - Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags |
| ISO 15675-2001 |
心臟脈管和人工器官.心脈旁通系統.動脈血過濾器 |
Cardiovascular implants and artificial organs - Cardiopulmonary bypass systems - Arterial line blood filters |
| ISO 15680-2003 |
水質.用purge-and-trap和熱解析作用對單環芳香烴、萘和不同氯化物的氣相色譜分析測定 |
|
| ISO 15681-1-2003 |
水質.用流量分析(FIA和CFA)法測定正磷酸鹽和含磷總量.第1部分:流量注入分析法(FIA) |
|
| ISO 15681-1-2003 |
水質.用流量分析(FIA和CFA)法測定正磷酸鹽和含磷總量.第1部分:流量注入分析法(FIA) |
|
| ISO 15681-2-2003 |
水質.用流量分析(FIA和CFA)法測定正磷酸鹽和含磷總量.第2部分:連續流量分析法(CFA) |
|
| ISO 15681-2-2003 |
水質.用流量分析(FIA和CFA)法測定正磷酸鹽和含磷總量.第2部分:連續流量分析法(CFA) |
|
| ISO 15682-2000 |
水質.通過流量分析(CFA和FIA)和光度測量或電勢檢測法測定氯化物含量 |
Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection |
| ISO 15685-2004 |
土壤質量.潛在氮化合物和氮化合物的抑止物的測定.銨氧化物的快速試驗 |
|
| ISO 15686-1-2000 |
建筑物和建筑構件.使用壽命計劃.第1部分:總則 |
Buildings and constructed assets - Service life planning - Part 1: General principles |
| ISO 15686-2-2001 |
建筑物和建筑構件.使用壽命計劃.第2部分:使用壽命預測過程 |
Buildings and constructed assets - Service life planning - Part 2: Service life prediction procedures |
| ISO 15686-3-2002 |
房屋和建筑資產.服務年限計劃.第3部分:性能審核和檢驗 |
Building and constructed assets - Service life planning - Part 3: Performance audits and reviews |
| ISO 15686-6-2004 |
房屋和建筑資產.服務壽命規劃.第6部分:考慮環境影響的規程 |
|
| ISO 15688-2003 |
道路建設和維護設備.土壤穩定劑.術語和商用規范 |
(Road construction and maintenance equipment - Soil stabilizers - Terminology and commercial specifications) |
| ISO 15688-2003 |
道路建設和維護設備.土壤穩定劑.術語和商用規范 |
|
| ISO 15689-2003 |
道路建造和維護設備.粉狀鋪路瀝青用攤鋪機.術語和商業規范 |
(Road construction and maintenance equipment - Powder binder spreaders - Terminology and commercial specifications) |
| ISO 15689-2003 |
道路建造和維護設備.粉狀鋪路瀝青用攤鋪機.術語和商業規范 |
|
| ISO 15695 Technical Corrigendum 1-2000 |
釉層和搪瓷.末涂瓷漆耐劃痕性的測定.技術勘誤1 |
Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes; Technical Corrigendum 1 |
| ISO 15695-2000 |
釉層和搪瓷.搪瓷涂層耐劃痕性的測定 |
(Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes) |
| ISO 157-1996 |
煤.各種硫類型的測定 |
Coal - Determination of forms of sulfur |
| ISO 1570-1975 |
鋅和鋅合金.錫含量的測定.分光光度法 |
(Zinc and zinc alloys; Determination of tin content; Spectrophotometric method) |
| ISO 15700-1998 |
皮革.色牢度試驗.耐水斑點色牢度 |
(Leather - Tests for colour fastness - Colour fastness to water spotting) |
| ISO 15701-1998 |
皮革.色牢度試驗.受聚氯乙烯影響的色牢度 |
(Leather - Tests for colour fastness - Colour fastness to migration into plasticized poly(vinyl chloride)) |
| ISO 15702-1998 |
皮革.色牢度試驗.機洗對色牢度的影響 |
Leather - Tests for colour fastness - Colour fastness to machine washing |
| ISO 15703-1998 |
皮革.色牢度試驗.輕柔洗滌對色牢度的影響 |
Leather - Tests for colour fastness - Colour fastness to mild washing |
| ISO 15704-2000 |
工業自動化系統.計劃參考建筑和方法學的要求 |
Industrial automation systems - Requirements for enterprise-reference architectures and methodologies |
| ISO 15705-2002 |
水質.化學需氧量的測定(ST-COD).小型密封管法 |
Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method |
| ISO 15706-2002 |
信息和文獻工作.國際標準視聽數碼(ISAN) |
Information and documentation - International Standard Audiovisual Number (ISAN) |
| ISO 15707-2001 |
信息和文獻學.國際標準音樂管理代碼(ISWC) |
Information and documentation - International Standard Musical Work Code (ISWC) |
| ISO 15708-2-2002 |
無損檢驗.輻射法.計算機斷層攝影.第2部分:檢驗的實施規程 |
Non-destructive testing - Radiation methods - Computed tomography - Part 2: Examination practices |
| ISO 15709-2002 |
土質.土壤水分和未飽和生物圈.定義,符號和理論 |
Soil quality - Soil water and the unsaturated zone - Definitions, symbols and theory |
| ISO 15710-2002 |
涂料和清漆.在緩沖氯化鈉溶液中反復腐蝕以及從該溶液中清除的腐蝕試驗 |
Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
| ISO 15711-2003 |
色漆和清漆.曝露于海水中覆層的耐陰極解粘合作用的測定 |
(Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water) |
| ISO 15711-2003 |
色漆和清漆.曝露于海水中覆層的耐陰極解粘合作用的測定 |
|
| ISO 15715-2003 |
涂料和清漆用粘合劑.混濁度的測定 |
Binders for paints and varnishes - Determination of turbidity |
| ISO 15715-2003 |
涂料和清漆用粘合劑.混濁度的測定 |
|
| ISO 15715-2003 |
涂料和清漆用粘合劑.混濁度的測定 |
|
| ISO 15717-1998 |
廚房家具.廚柜和工作臺的安全技術要求和試驗方法 |
Kitchen equipment - Safety requirements and test methods for kitchen cabinets and work tops |
| ISO 1572-1980 |
茶葉.已知干物質含量的研碎樣品的制備 |
Tea; Preparation of ground sample of known dry matter content |
| ISO 15720-2001 |
金屬涂層.孔隙率試驗.膠材料電版術法測定金屬襯底上金和鈀涂層孔隙度 |
Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography |
| ISO 15721-2001 |
金屬涂層.孔隙率試驗.用亞硫酸和二氧化硫蒸氣對金和鈀涂層孔隙率的測定 |
Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour |
| ISO 15724-2001 |
金屬和其它無機涂層.鋼中可擴散氫的電化學測量.Barnacle電極法 |
Metallic and other inorganic coatings - Electrochemical measurement of diffusible hydrogen in steels - Barnacle electrode method |
| ISO 1573-1980 |
茶葉.103℃時質量損失的測定 |
Tea; Determination of loss in mass at 103 degrees C |
| ISO 15730-2000 |
金屬和其他無機涂層.用電拋光精加工和鈍化不銹鋼 |
Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel |
| ISO 15732-2003 |
精細陶瓷(高級陶瓷、高級工業陶瓷).室溫下用單邊預裂束法(SEPB)測定塊體陶瓷破裂韌性的試驗方法 |
(Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method) |
| ISO 15732-2003 |
精細陶瓷(高級陶瓷、高級工業陶瓷).室溫下用單邊預裂束法(SEPB)測定塊體陶瓷破裂韌性的試驗方法 |
|
| ISO 15732-2003 |
精細陶瓷(高級陶瓷、高級工業陶瓷).室溫下用單邊預裂束法(SEPB)測定塊體陶瓷破裂韌性的試驗方法 |
|
| ISO 15733-2001 |
精細陶瓷(高級陶瓷和高級工程陶瓷).室溫下測定連續纖維增強合成物的抗拉伸應力-應變性能的試驗方法 |
Fine ceramics (advanced ceramis, advanced technical ceramics) - Test method for tensile stress-strain behaviour of continuous, fibre-reinforced composites at room temperature |
| ISO 15734-2001 |
船舶和造船技術.靜水壓力釋放裝置 |
Ships and marine technology - Hydrostatic release units |
| ISO 15738-2002 |
船舶與海上技術.充氣救生裝置用充氣系統 |
Ships and marine technology - Gas inflation systems for inflatable life-saving appliances |
| ISO 15739-2003 |
攝影.電子靜止圖象成像.噪聲測量 |
(Photography - Electronic still-picture imaging - Noise measurements) |
| ISO 15739-2003 |
攝影.電子靜止圖象成像.噪聲測量 |
|
| ISO 15741-2001 |
涂料和清漆.水上和水下無腐蝕氣體管道內側的減小摩擦涂層 |
Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases |
| ISO 15744-2002 |
手持非電動工具.噪聲測量代碼.工程法(2級) |
Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) |
| ISO 15745-1-2003 |
工業自動化系統和集成.開放系統應用集成框架.第1部分:一般參考說明 |
(Industrial automation systems and integration - Open systems application integration framework - Part 1: Generic reference description ) |
| ISO 15745-1-2003 |
工業自動化系統和集成.開放系統應用集成框架.第1部分:一般參考說明 |
|
| ISO 15745-2-2003 |
工業自動化系統和集成.開放系統應用集成框架.第2部分:基于ISO 11898的控制系統所使用的參考性描述 |
(Industrial automation systems and integration - Open systems application integration framework - Part 2: Reference description for ISO 11898-based control systems) |
| ISO 15745-2-2003 |
工業自動化系統和集成.開放系統應用集成框架.第2部分:基于ISO 11898的控制系統所使用的參考性描述 |
|
| ISO 15745-3-2003 |
工業自動化系統和集成.開放系統應用集成框架.第3部分:基于IEC 61158的控制系統所使用的參考性描述 |
(Industrial automation systems and integration - Open systems application integration framework - Part 3: Reference description for IEC 61158-based control systems) |
| ISO 15745-3-2003 |
工業自動化系統和集成.開放系統應用集成框架.第3部分:基于IEC 61158的控制系統所使用的參考性描述 |
|
| ISO 15745-4-2003 |
工業自動化系統和集成.開放系統應用集成框架.第4部分:基于以太網的控制系統所使用的參考性描述 |
(Industrial automation systems and integration - Open systems application integration framework - Part 4: Reference description for Ethernet-based control systems) |
| ISO 15745-4-2003 |
工業自動化系統和集成.開放系統應用集成框架.第4部分:基于以太網的控制系統所使用的參考性描述 |
|
| ISO 15747-2003 |
靜脈注射用塑料容器 |
(Plastics containers for intravenous injection) |
| ISO 15747-2003 |
靜脈注射用塑料容器 |
|
| ISO 15747-2003 |
靜脈注射用塑料容器 |
|
| ISO 15747-2003 |
靜脈注射用塑料容器 |
|
| ISO 15748-1-2002 |
船舶和海運技術.在船上和海上建筑物上飲用水的供應.第1部分:計劃和設計 |
Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design |
| ISO 15748-2-2002 |
船舶和海運技術.在船上和海上建筑物上飲用水的供應.第2部分:計算方法 |
Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation |
| ISO 15749-1-2004 |
船舶和海上技術.船舶和海上結構物的排水系統.第1部分:衛生排水系統設計 |
|
| ISO 15749-2-2004 |
船舶和海上技術.船舶和海上結構物的排水系統.第2部分:重力系統用衛生排水和排水管道 |
|
| ISO 15749-3-2004 |
船舶和海上技術.船舶和海上結構物的排水系統.第3部分:真空系統用衛生排水和排水管道 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com