標準號 |
中文名稱 |
英文名稱 |
| ISO 4854-1981 |
個人用目鏡.光學試驗方法 |
(Personal eye-protectors; Optical test methods) |
| ISO 4855-1981 |
個人用目鏡.非光學試驗方法 |
Personal eye-protectors; Non-optical test methods |
| ISO 4856-1982 |
個人用目鏡.目鏡和護目鏡技術要求簡表 |
Personal eye-protectors; Synoptic tables of requirements for oculars and eye-protectors |
| ISO 4858-1982 |
木材.體積收縮率的測定 |
Wood; Determination of volumetric shrinkage |
| ISO 4859-1982 |
木材.徑向和切向膨脹的測定 |
Wood; Determination of radial and tangential swelling |
| ISO 486-1988 |
電影技術.16mm電影膠片和穿孔的8mmR型電影膠片.裁剪和穿孔尺寸 |
Cinematography; 16 mm motion-picture film perforated 8 mm Type R; cutting and perforating dimensions |
| ISO 4860-1982 |
木材.體積膨脹的測定 |
Wood; Determination of volumetric swelling |
| ISO 4863-1984 |
彈性聯軸器.用戶和制造者提供的數據資料 |
Resilient shaft couplings; Information to be supplied by users and manufacturers |
| ISO 4866 AMD 1-1994 |
機械振動和沖擊.建筑物振動.振動和其對建筑物影響評定的測量導則.修改件1 |
Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings; Amendment 1 |
| ISO 4866 AMD 2-1996 |
機械振動和沖擊.建筑物振動.振動和其對建筑物影響評定的測量導則.修改件2 |
Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings; Amendment 2 |
| ISO 4866 DAM 1-1991 |
機械振動和沖擊.建筑物的振動.振動測量及其對建筑物影響的評定指南.第1次修改 |
Mechanical vibration and shock; vibration of buildings; guidelines for the measurement of vibrations and evaluation of their effects on buildings; amendment 1 |
| ISO 4866-1990 |
機械振動和沖擊.建筑物的振動.振動和其對建筑物影響評定的測量導則 |
Mechanical vibration and shock; vibration of buildings; guidelines for the measurement of vibrations and evaluation of their effects on buildings |
| ISO 4867-1984 |
船上振動數據的測量和報告的規范 |
Code for the measurement and reporting of shipboard vibration data |
| ISO 4868-1984 |
船舶結構和設備的局部振動數據測量和報告的規范標準 |
Code for the measurement and reporting of local vibration data of ship structures and equipment |
| ISO 4869-1-1990 |
聲學.聽力保護器.第1部分:聲衰減的主觀測量法 |
Acoustics; hearing protectors; part 1: subjective method for the measurement of sound attenuation |
| ISO 4869-2-1994 |
聲學.聽力保護器.第2部分:當聽力保護器磨損時影響性的A-重聲壓級的評定 |
Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn |
| ISO 4869-2-1994 |
聲學.聽力保護器.第2部分:當聽力保護器磨損時影響性的A-重聲壓級的評定 |
Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn |
| ISO 487-1998 |
S型和C型鋼質輥?zhàn)渔?附件和鏈輪 |
Steel roller chains, types S and C, attachments and sprockets |
| ISO 4871-1996 |
聲學.機器和設備釋放燥音值的審報和檢測 |
Acoustics - Declaration and verification of noise emission values of machinery and equipment |
| ISO 4872-1978 |
聲學.室外施工設備發出的空氣噪音測量.符合噪音限值的檢驗方法 |
Acoustics; Measurement of airborne noise emitted by construction equipment intended for outdoor use; Method for checking compliance with noise limits |
| ISO 4874-2000 |
煙草.批量原材料取樣.一般原則 |
Tobacco - Sampling of batches of raw material - General principles |
| ISO 4875-1-1978 |
金屬切削的帶鋸鋸條.第1部分:定義和術語 |
Metal cutting band saw blades; Part I : Definitions and terminology |
| ISO 4875-2-1978 |
金屬切削的帶鋸鋸條.第2部分:基本尺寸和公差 |
Metal cutting band saw blades; Part 2 : Basic dimensions and tolerances |
| ISO 4875-3-1978 |
金屬切削的帶鋸鋸條.第3部分:各種類型的鋸條的特點 |
Metal cutting band saw blades; Part III : Characteristics relating to each type of blade |
| ISO 4876-1980 |
煙草和煙草制品.馬束酰肼殘留量的測定 |
Tobacco and tobacco products; Determination of maleic hydrazide residues |
| ISO 488-1983 |
牛奶.脂肪含量的測定.蓋伯爾(Gerber)奶油計 |
Milk; Determination of fat content; Gerber butyrometers |
| ISO 4880 DAM 2-1991 |
織物和紡織品的燃燒性能.詞匯.第2次修改 |
Burning behaviour of textiles and textile products; vocabulary; amendment 2 |
| ISO 4880-1997 |
織物和紡織品的燃燒性能.詞匯 |
Burning behaviour of textiles and textile products - Vocabulary |
| ISO 4882-1979 |
辦公用計算機和數據處理設備.行距和字符間距 |
Office machines and data processing equipment; Line spacings and character spacings |
| ISO 4883-1978 |
硬質合金.用X射線熒光測定金屬素的含量.溶解法 |
Hardmetals; Determination of contents of metallic elements by X-ray fluorescence; Solution method |
| ISO 4884-1978 |
硬質合金.燒結試件用粉末的取樣和試驗 |
Hardmetals; Sampling and testing of powders using sintered test pieces |
| ISO 4885-1996 |
鐵制品.熱處理詞匯 |
Ferrous products - Heat treatments - Vocabulary |
| ISO 489-1999 |
塑料.反射指數的測定 |
Plastics - Determination of refractive index |
| ISO 4892-1-1999 |
塑料.暴露于實驗室光源的方法.第1部分:通用指南 |
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance |
| ISO 4892-2-1994 |
塑料.暴露于實驗室光源的方法.第2部分:氙弧燈 |
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources |
| ISO 4892-3-1994 |
塑料.暴露于實驗室光源的方法.第3部分:UV熒光燈 |
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps |
| ISO 4892-4-1994 |
塑料.暴露于實驗室光源的方法.第4部分:明焰炭弧燈 |
Plastics - Methods of exposure to laboratory light sources - Part 4: Open-flame carbon-arc lamps |
| ISO 4892-4-2004 |
塑料.實驗室光源暴露方法.第4部分:火焰炭弧燈 |
|
| ISO 4894-1-1997 |
塑料.苯乙烯/丙烯腈(SAN)共聚物的模塑和擠塑材料.第1部分:命名系統和基本規范 |
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
| ISO 4894-2-1995 |
塑料.苯乙烯/丙烯腈(SAN)共聚物的模塑和擠塑材料.第2部分:性能的測定 |
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
| ISO 4895-1997 |
塑料.液態環氧樹脂.結晶可能性的測定 |
Plastics - Liquid epoxy resins - Determination of tendency to crystallize |
| ISO 4896-1990 |
塑料.三聚氰胺/酚醛模塑材料.規范 |
Plastics; melamine/phenolic moulding materials; specification |
| ISO 4897-1985 |
泡沫塑料.低于室溫下的硬質材料線性熱膨脹素?cái)?shù)的測定 |
Cellular plastics; Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures |
| ISO 4898 ADD 1-1988 |
第1次補充 |
Cellular plastics; specification for rigid cellular materials used in the thermal insulation of buildings; addendum 1: phenol-formaldehyde cellular plastics (RC/PF) |
| ISO 4898 ADD 2-1988 |
第2次補充 |
Cellular plastics; specification for rigid cellular materials used in the thermal insulation of buildings; addendum 2: labelling and marking of products |
| ISO 4898 AMD 4-2000 |
泡沫塑料.用于建筑物熱絕緣的硬質多孔材料規范.修改件4 |
Cellular plastics - Specification for rigid cellular materials used in the thermal insulation of buildings; Amendment 4 |
| ISO 4898-1984 |
泡沫塑料.用于建筑物熱絕緣的硬質多孔材料規范 |
Cellular plastics; Specification for rigid cellular materials used in the thermal insulation of buildings |
| ISO 4898-2004 |
硬質泡沫塑料.建筑物用熱絕緣產品.規范 |
|
| ISO 4899-1993 |
紡織玻璃纖維增強熱固性塑料.性能和試驗方法 |
Textile-glass reinforced thermosetting plastics; properties and test methods |
| ISO 49 Technical Corrigendum 1-1997 |
符合ISO 7/1螺紋標準的可鍛鑄鐵配件.技術勘誤表1 |
Malleable cast iron fittings threaded to ISO 7-1; Technical Corrigendum 1 |
| ISO 49-1994 |
符合ISO 7-1螺紋標準的可鍛鑄鐵配件 |
Malleable cast iron fittings threaded to ISO 7-1 |
| ISO 490-1993 |
電影技術.在沿單邊穿孔的16mm電影膠片上錄音用磁帶和磁頭縫隙(1型).位置和寬度尺寸 |
Cinematography; magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (type 1); positions and width dimensions |
| ISO 4900-1990 |
紡織玻璃纖維.墊和織物.接觸成形性的測定 |
Textile glass; mats and fabrics; determination of contact mouldability |
| ISO 4901-1985 |
以未飽和聚脂樹脂為基質的強化塑料.剩余苯乙烯單體含量的測定 |
Reinforced plastics based on unsaturated polyester resins; Determination of residual styrene monomer content |
| ISO 4902-1989 |
信息技術.數據通信.37路數據終端設備/數據通信設備(DTE/DCE)接口連接件和觸點數分配 |
Information technology; data communication; 37-pole DTE/DCE interface connector and contact number assignments |
| ISO 4903-1989 |
信息技術.數據通信.15路數據終端設備/數據通信設備(DCT/DCE)接口連接件和觸點數分配 |
Information technology; data communication; 15-pole DTE/DCE interface connector and contact number assignments |
| ISO 4909-2000 |
銀行卡.3列磁道的磁帶數據量 |
Bank cards - Magnetic stripe data content for track 3 |
| ISO 491-2002 |
電影攝影.35mm電影膠片和涂磁膠片.剪切和穿孔尺寸 |
Cinematography - 35 mm motion-picture film and magnetic film - Cutting and perforating dimensions |
| ISO 4911-1980 |
紡織品.棉纖維.原棉分級室用設備和人造光源 |
Textiles; Cotton fibres; Equipment and artificial lighting for cotton classing rooms |
| ISO 4912-1981 |
紡織品.棉纖維.成熟度的測量.顯微法 |
Textiles; Cotton fibres; Evaluation of maturity; Microscopic method |
| ISO 4913-1981 |
紡織品.棉纖維.長度(跨距長度)均勻指數的測定 |
Textiles; Cotton fibres; Determination of length (span length) and uniformity index |
| ISO 4915-1991 |
紡織品.縫合類型.分類和術語 |
Textiles; stitch types; classification and terminology |
| ISO 4916-1991 |
紡織品.縫合類型.分類和術語 |
Textiles; seam types; classification and terminology |
| ISO 4919-1978 |
鋪地織物.絨頭拔出力的測定 |
Textile floor coverings; Determination of tuft withdrawal force |
| ISO 492-2002 |
滾動軸承.徑向軸承.公差 |
Rolling bearings - Radial bearings - Tolerances |
| ISO 4920-1981 |
紡織品.織物耐表面濕潤(噴霧試驗)性的測定 |
Textiles; determination of resistance to surface wetting (spray test) of fabrics |
| ISO 4921-2000 |
針織.基本概念.詞匯 |
Knitting - Basic concepts - Vocabulary |
| ISO 4925-1978 |
道路車輛.非石油基制動液 |
Road vehicles; Non-petroleum base brake fluid |
| ISO 4926-1978 |
道路車輛.液壓制動系統.非石油基標準液 |
Road vehicles; Hydraulic brake systems; Non-petroleum base reference fluids |
| ISO 4927-1978 |
道路車輛.使用非石油基液壓制動液的鼓式液壓缸的彈性保護罩(最大工作溫度120℃) |
Road vehicles; Elastomeric boots for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C maximum) |
| ISO 4928-1980 |
道路車輛.使用非石油基液壓制動液的液壓制動系統液壓缸的彈性罩皮碗和密封圈(最大工作溫度120℃) |
Road vehicles; Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) |
| ISO 4929-1978 |
道路車輛.使用非石油基液壓制動液的液壓制動主液壓缸儲油器的膜片密封墊 |
Road vehicles; Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid |
| ISO 493-1975 |
飛機.單孔道裝配(1和2類)的拉桿操縱的手控開關的尺寸 |
(Aircraft; Dimensions for single-hole mounting (Class 1 and Class 2) lever-operated manual switches) |
| ISO 4930-1978 |
道路車輛.使用非石油基液壓制動液的液壓制動盤式液壓缸的彈性密封墊(最大工作溫度150℃) |
(Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)) |
| ISO 4934-1980 |
鋼和鑄鐵.硫含量的測定.重量分析法 |
(Steel and cast iron; Determination of sulfur content; Gravimetric method) |
| ISO 4934-2003 |
鋼和鐵.硫含量的測定.重量分析法 |
|
| ISO 4935-1990 |
鋼和鐵.硫含量的測定.感應爐內燃燒紅外線吸收法 |
(Steel and iron; determination of sulfur content; infrared absorption method after combustion in an induction furnace) |
| ISO 4937-1986 |
鋼和鐵.鉻含量的測定.電位滴定法或目視滴定法 |
Steel and iron; Determination of chromium content; Potentiometric or visual titration method |
| ISO 4938-1988 |
鋼和鐵.鎳含量的測定.重量法或滴定法 |
(Steel and iron; determination of nickel content; gravimetric or titrimetric method) |
| ISO 4939-1984 |
鋼和鑄鐵.鎳含量的測定.丁二酮肟分光光度法 |
(Steel and cast iron; Determination of nickel content; Dimethylglyoxime spectrophotometric method) |
| ISO 494-1975 |
直柄麻花鉆.長型系列 |
Parallel shank twist drills; Long series |
| ISO 4940-1985 |
鋼和鑄鐵.鎳含量的測定.火焰原子吸收光譜測定法 |
Steel and cast iron; Determination of nickel content; Flame atomic absorption spectrometric method |
| ISO 4941-1994 |
鋼和鑄鐵.鉬含量的測定.硫氰化物的分光光度法 |
Steel and iron - Determination of molybdenum content - Thiocyanate spectrophotometric method |
| ISO 4942-1988 |
鋼和鐵.釩含量的測定.N-BPHA分光光度法 |
Steel and iron; determination of vanadium content; N-BPHA spectrophotometric method |
| ISO 4943-1985 |
鋼和鑄鐵.銅含量的測定.火焰原子吸收光譜測定法 |
Steel and cast iron; Determination of copper content; Flame atomic absorption spectrometric method |
| ISO 4945-1977 |
鋼.氮含量的測定.分光光度法 |
Steel; Determination of nitrogen content; Spectrophotometric method |
| ISO 4946-1984 |
鋼和鑄鐵.銅含量的測定.2,2 ` 一聯喹啉分光光度法 |
Steel and cast iron; Determination of copper content; 2,2`-Diquinolyl spectrophotometric method |
| ISO 4947-1986 |
鋼和鑄鐵.釩含量的測定.電位計滴定法 |
Steel and cast iron; Determination of vanadium content; Potentiometric titration method |
| ISO 4948-1-1982 |
鋼.分類.第1部分:根據化學成分對非合金鋼和合金鋼的分類 |
Steels; Classification; Part 1 : Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 4948-2-1981 |
鋼.分類.第2部分:根據主要質量等級和主要性能或應用特性對非合金鋼和合金鋼的分類 |
(Steels; Classification; Part 2 : Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics) |
| ISO 4950-1 AMD 1-2003 |
高屈服強度扁鋼材.第1部分:一般要求.修改件1 |
(High yield strength flat steel products - Part 1: General requirements; Amendment 1 ) |
| ISO 4950-1 AMD 1-2003 |
高屈服強度扁鋼材.第1部分:一般要求.修改件1 |
|
| ISO 4950-2 AMD 1-2003 |
高屈服強度扁鋼材.第2部分:按正火或控制軋制條件提供的鋼材.修改件1 |
(High yield strength flat steel products - Part 2: Products supplied in the normalized or controlled rolled condition; Amendment 1 ) |
| ISO 4950-2 AMD 1-2003 |
高屈服強度扁鋼材.第2部分:按正火或控制軋制條件提供的鋼材.修改件1 |
|
| ISO 4950-3 AMD 1-2003 |
高屈服強度扁鋼材.第3部分:按熱處理(淬火+回火)條件提供的鋼材.修改件1 |
(High yield strength flat steel products - Part 3: Products supplied in the heat-treated (quenched + tempered) condition; Amendment 1 ) |
| ISO 4950-3 AMD 1-2003 |
高屈服強度扁鋼材.第3部分:按熱處理(淬火+回火)條件提供的鋼材.修改件1 |
|
| ISO 4951-1-2001 |
高屈服強度鋼棒材和型材.第1部分:一般交貨條件 |
High yield strength steel bars and sections - Part 1: General delivery requirements |
| ISO 4951-2-2001 |
高屈服強度鋼棒和型材.第2部分:正火/正火軋制和軋制后鋼的交貨條件 |
High yield strength steel bars and sections - Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels |
| ISO 4951-3-2001 |
高屈服強度鋼棒材和型材.第3部分:熱工機械軋制鋼的交貨條件 |
High yield strength steel bars and sections - Part 3: Delivery conditions for thermomechanically-rolled steels |
| ISO 4952-2003 |
改進抗大氣腐蝕性的結構鋼 |
Structural steels with improved atmospheric corrosion resistance |
| ISO 4952-2003 |
改進抗大氣腐蝕性的結構鋼 |
|
| ISO 4954-1993 |
冷鐓和冷擠壓鋼 |
Steels for cold heading and cold extruding |
| ISO 4955-1994 |
耐熱鋼和耐熱合金 |
Heat-resisting steels and alloys |
| ISO 4957-1999 |
工具鋼 |
Tool steels |
| ISO 496-1973 |
驅動和被驅動機械.軸的高度 |
Driving and driven machines; Shaft heights |
| ISO 496-1973 |
驅動和被驅動機械.軸的高度 |
Driving and driven machines; Shaft heights |
| ISO 4960-1999 |
碳含量0.25%以上的冷軋?zhí)妓劁搸?/td>
| Cold-reduced carbon steel strip with a carbon content over 0,25 % |
| ISO 4964-1984 |
鋼.硬度換算法 |
Steel; Hardness conversions |
| ISO 4965-1979 |
軸向負荷疲勞試驗機.動態力校準.應變測量技術 |
Axial load fatigue testing machines; Dynamic force calibration; Strain gauge technique |
| ISO 4967-1998 |
鋼.非金屬夾雜物含量的測定.使用標準圖的縮微照相法 |
Steel - Determination of content of nonmetallic inclusions - Micrographic method using standard diagrams |
| ISO 4968-1979 |
鋼.硫磺宏觀檢驗法(鮑曼(Baumunn)法) |
Steel; Macrographic examination by sulfur print (Baumann method) |
| ISO 4969-1980 |
鋼.用強無機酸蝕劑的低倍放大檢驗 |
Steel; Macroscopic examination by etching with strong mineral acids |
| ISO 497-1973 |
優先數列和含有圓整數值的優先數列的選用指南 |
Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
| ISO 4970-1979 |
鋼.表面硬化薄層的總厚度或有效厚度的測定 |
Steel; Determination of total or effective thickness of thin surface-hardened layers |
| ISO 4978-1983 |
焊接氣瓶用軋制扁鋼 |
Flat rolled steel products for welded gas cylinders |
| ISO 498-1992 |
天然橡膠膠乳濃縮物.干膜的制備 |
Natural rubber latex concentrate; preparation of dry films |
| ISO 4986-1992 |
鋼鑄件.磁粉檢驗 |
Steel castings; magnetic particle inspection |
| ISO 4987-1992 |
鋼鑄件.滲透劑檢驗 |
Steel castings; penetrant inspection |
| ISO 4990-1986 |
鋼鑄件.交貨的一般技術要求 |
Steel castings; General technical delivery requirements |
| ISO 4990-2003 |
鑄鋼件.交貨的一般技術要求 |
(Steel castings - General technical delivery requirements ) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com