標準號 |
中文名稱 |
英文名稱 |
| BS ISO 17776-2001 |
石油和天然氣工業.海上生產裝置.危險識別和風險評定用工具和技術的導則 |
Petroleum and natural gas industries - Offshore production installations - Guidance on tools and techniques for hazard identification and risk assessment |
| BS ISO 1781-1995 |
電影技術.直接正面放映用8mmS型電影膠片放映機的用法 |
Cinematography - Projector usage of 8 mm type S motion-picture film for direct front projection |
| BS ISO 1785-1996 |
電影技術.在穿孔8mm、S(1-4)型16mm電影膠片上拷貝的8mm、S型影像區.位置和尺寸 |
Cinematography - Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4) - Position and dimensions |
| BS ISO 1787-1996 |
電影技術.8mmS型電影膠片電影攝影機的用法規范 |
Cinematography - Camera usage of 8 mm Type S motion-picture film - Specifications |
| BS ISO 17884-2004 |
船舶和海上技術.快艇用探照燈 |
|
| BS ISO 17899-2004 |
船舶和海上技術.船上窗用電刮水器 |
|
| BS ISO 17900-2002 |
農用掛車.平衡半懸掛式掛車.測定負荷、垂直負荷和軸承負荷 |
Agricultural trailers - Balanced and semi-mounted trailers - Determination of payload, vertical static load and axle load |
| BS ISO 1793-2005 |
電影.16mm電影放映機用片夾(容量610m及以下:尺寸38cm).尺寸 |
|
| BS ISO 1795-2000 |
天然和合成生橡膠.取樣和進一步的準備過程 |
Rubber, raw natural and raw synthetic - Sampling and further preparative procedures |
| BS ISO 17973-2003 |
表面化學分析.中分辨率螺旋電子光譜儀.素分析用能量標度的校準 |
Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis |
| BS ISO 17974-2002 |
表面化學分析.高分辨率螺旋電子光譜儀.素和化學狀態分析用能量標度的校準 |
Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis |
| BS ISO 17993-2002 |
水質.液體對液體萃取后用HPLC熒光檢波在水中對15個多環芳香烴的測定 |
Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction |
| BS ISO 17997-1-2005 |
乳.酪蛋白氮含量測定.間接方法(參照法) |
|
| BS ISO 17997-2-2005 |
乳.酪蛋白氮含量測定.直接方法 |
|
| BS ISO 1803-1998 |
建筑結構.公差.尺寸精度的表示法.原則和術語 |
Building construction - Tolerances - Expression of dimensional accuracy - Principles and terminology |
| BS ISO 18054-2004 |
鳶尾根莖油.鐵含量測定.毛細柱氣相色譜法 |
|
| BS ISO 18054-2004 |
鳶尾根莖油.鐵含量測定.毛細管柱氣相色譜法 |
|
| BS ISO 18055-1-2004 |
攝影和成像.噴墨介質.分類、命名和尺寸.照片級介質(相紙和膠片) |
|
| BS ISO 18064-2003 |
熱塑性彈性體.命名和縮寫的術語 |
(Thermoplastic elastomers - Nomenclature and abbreviated terms) |
| BS ISO 18073-2004 |
水質.三氯至八氯二氧雜環乙烯和呋喃的測定.同位素稀釋HRGC/HRMS法 |
|
| BS ISO 18114-2003 |
表面化學分析.次級離子質譜法.測定離子注入標樣的相對靈敏系數 |
(Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials) |
| BS ISO 18115-2001 |
表面化學分析.詞匯 |
Surface chemical analysis - Vocabulary |
| BS ISO 18118-2005 |
表面化學分析.俄歇電子光譜法和X射線光電子光譜法.同質材料定量分析用實驗室測定相對敏感性系數的使用指南 |
|
| BS ISO 18164-2005 |
乘用車、卡車、公共汽車和摩托車輪胎.滾動阻力測量方法 |
|
| BS ISO 18165-2002 |
石油和天然氣工業.水泥漂浮設備的性能試驗 |
Petroleum and natural gas industries - Performance testing of cementing float equipment |
| BS ISO 1817-1999 |
硫化橡膠.液化效果的測定 |
Rubber, vulcanized - Determination of the effect of liquids |
| BS ISO 1830-2005 |
紙、紙板和紙漿.酸溶性錳的測定 |
|
| BS ISO 1832-2004 |
切削刀具用可轉位刀片.名稱與符號 |
|
| BS ISO 18329-2004 |
乳和乳制品.furosine含量的測定.離子對反相高效液相色譜法 |
|
| BS ISO 18333-2003 |
物料裝卸用托盤.平板托盤用新木制部件的質量 |
Pallets for materials handling - Quality of new wooden components for flat pallets |
| BS ISO 18334-2003 |
材料運輸用托盤.新的木制平托盤的組裝質量 |
Pallets for materials handling - Quality of assembly of new, wooden, flat pallets |
| BS ISO 1834-1999 |
提升用短扁節鏈.驗收的一般條件 |
Short link chain for lifting purposes - General conditions of acceptance |
| BS ISO 1837-2003 |
起重鉤.命名 |
(Lifting hooks - Nomenclature) |
| BS ISO 18395-2005 |
動植物脂肪和油.用高效粒度排除色譜法(HPSEC)測定單酰甘油、二酰甘油、三酰甘油和丙三醇 |
|
| BS ISO 18413-2002 |
液壓傳動裝置.零件和組件的清潔度.與長期收集、分析和數據報告相關的審核文件 |
Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting |
| BS ISO 18431-2-2005 |
機械振動和沖擊.信號處理.傅里葉變換分析用時域窗 |
|
| BS ISO 18436-1-2004 |
機器的工況監測與診斷.人員的培訓與認證要求.認證機構和認證過程的要求 |
|
| BS ISO 18553-2002 |
在聚烯烴管、配件和化合物中色料或炭黑分散程度的評定方法 |
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| BS ISO 18573-2003 |
輸送帶.試驗大氣和狀態調節期 |
(Conveyor belts - Test atmospheres and conditioning periods) |
| BS ISO 18593-2004 |
食物和動物飼料的微生物學.使用接觸板和拭子的表面取樣技術的水平方法 |
|
| BS ISO 18649-2004 |
機械振動.橋梁動態試驗和調查的測量結果的評價 |
|
| BS ISO 18653-2003 |
齒輪.單個齒輪測量儀器的評價 |
(Gears - Evaluation of instruments for the measurement of individual gears) |
| BS ISO 18669-1-2005 |
內燃機.活塞銷.一般規范 |
|
| BS ISO 18669-2-2005 |
內燃機.活塞銷.檢驗測量原理 |
|
| BS ISO 18738-2003 |
升降機(電梯).升降機提升質量測定 |
(Lifts (elevators) - Measurement of lift ride quality) |
| BS ISO 188-1998 |
硫化或熱塑橡膠.加速老化或耐熱性試驗 |
Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests |
| BS ISO 18852-2005 |
橡膠配合料.多點氮表面積(NSA)和統計厚度表面積(STSA)的測定 |
|
| BS ISO 18857-1-2005 |
水質.所選烷基苯酚的測定.使用液-液萃取和帶質量選擇檢測的氣相色譜法的無過濾樣品法 |
|
| BS ISO 1887-1995 |
紡織玻璃纖維.可燃物質含量的測定 |
Textile glass - Determination of combustible-matter content |
| BS ISO 18878-2004 |
移動式升降工作臺.駕駛員培訓 |
|
| BS ISO 1888-1997 |
紡織玻璃纖維.人造纖維或長絲.平均直徑的測定 |
Textile glass - Staple fibres or filaments - Determination of average diameter |
| BS ISO 18899-2004 |
橡膠.試驗設備的校正指南 |
|
| BS ISO 18901-2002 |
成象材料.加工銀膠質類黑白底片.穩定性規范 |
Imaging materials - Processed silver-gelatin type black-and-white film - Specifications for stability |
| BS ISO 18902-2001 |
成像材料.加工攝影膠片,板和紙.貯存容器 |
Imaging materials - Processed photographic films, plates and papers - Filing enclosures and storage containers |
| BS ISO 18903-2003 |
成像材料.攝影膠片和相紙的尺寸變化測定 |
Imaging materials - Films and paper - Determination of dimensional change |
| BS ISO 18904-2000 |
成像材料.沖洗過的膠片.測定潤滑方法 |
Imaging materials - Processed films - Method for determining lubrication |
| BS ISO 18905-2002 |
成象材料.氨水處理重氮攝影膠片.穩定性的規范 |
Imaging materials - Ammonia-processed diazo photographic film - Specifications for stability |
| BS ISO 18906-2001 |
成像材料.攝影膠片.安全膠片規范 |
Imaging materials - Photographic films - Specifications for safety film |
| BS ISO 18907-2000 |
成像材料.攝影膠片和相紙.脆性的錘擊韌性試驗 |
Imaging materials - Photographic films and papers - Wedge test for brittleness |
| BS ISO 18908-2000 |
成像材料.攝影膠片.耐折疊性的測定 |
Imaging materials - Photographic film - Determination of folding endurance |
| BS ISO 18910-2000 |
成像材料.攝影膠片和相紙.彎曲測定 |
Imaging materials - Photographic film and paper - Determination of curl |
| BS ISO 18911-2001 |
攝影技術.加工過的安全攝影膠片.儲存方法 |
Photography - Processed safety photographic films - Storage practices |
| BS ISO 18912-2002 |
成象材料.處理微泡狀攝影膠片.穩定性的規范 |
Imaging materials - Processed vesicular photographic film - Specifications for stability |
| BS ISO 18914-2002 |
成像材料.攝影膠片和感光紙.測定攝影感光乳劑耐濕磨性方法 |
Imaging materials - Photographic film and papers - Method for determining the resistance of photographic emulsions to wet abrasion |
| BS ISO 18915-2001 |
成像材料.抗氧化銀影化學轉化效果的評定方法 |
Imaging materials - Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation |
| BS ISO 18917-2000 |
攝影.在處理過的攝影材料上殘留的硫代硫酸鹽和其它相關的化學藥品的測定.碘-淀粉、亞甲藍和硫化銀方法 |
Photography - Determination of residual thiosulfate and other related chemicals in processed photographic materials - Methods using iodine-amylose, methylene blue and silver sulfide |
| BS ISO 18918-2000 |
成像材料.處理過的照相干版.存儲方法 |
Imaging materials - Processed photographic plates - Storage practices |
| BS ISO 18919-1999 |
成像材料.熱處理銀鹽微縮膠片.穩定性規范 |
Photography - Thermally processed silver microfilm - Specifications for stability |
| BS ISO 18920-2000 |
成像材料.處理過的照相反射光印片.存儲方法 |
Imaging materials - Processed photographic reflection prints - Storage practices |
| BS ISO 18921-2002 |
成像材料.只讀數據光盤(CD-ROM).基于溫度和相對濕度效應的概率壽命的估算方法 |
Imaging materials - Compact discs (CD-ROM) - Method for estimating the life expectancy based on the effects of temperature and relative humidity |
| BS ISO 18922-2003 |
成像材料.已沖洗過的攝影膠片.測定耐劃傷的方法 |
(Imaging materials - Processed photographic films - Methods for determining scratch resistance) |
| BS ISO 18923-2000 |
成像材料.聚酯基磁帶.存儲方法 |
Imaging materials - Polyester-base magnetic tape - Storage practices |
| BS ISO 18924-2000 |
成像材料.Arrhenius型預測的試驗方法 |
Imaging materials - Test methods for Arrhenius type predictions |
| BS ISO 18925-2002 |
成象材料.光盤介質.儲存慣例 |
Imaging materials - Optical disk media - Storage practices |
| BS ISO 18927-2002 |
成象材料.可再記錄大密度盤系統.在溫度和相對濕度的影響基礎上期望壽命的估計方法 |
Imaging materials - Recordable compact disc systems - Method for estimating the life expectancy based on the effects of temperature and relative humidity |
| BS ISO 18928-2002 |
成象材料.未經處理的攝影膠片和相紙.儲存規程 |
Imaging materials - Unprocessed photographic films and papers - Storage practices |
| BS ISO 18929-2004 |
成像材料.濕處理的銀膠式黑白攝影反射光印片.避光儲存規范 |
|
| BS ISO 18932-2005 |
成像材料.膠粘系統.規范 |
|
| BS ISO 19018-2005 |
船舶和海上技術.導航術語、縮寫、圖形符號和概念 |
|
| BS ISO 19101-2002 |
地質信息.參考模型 |
Geographic information - Reference model |
| BS ISO 19105-2001 |
地理信息.一致性及試驗 |
Geographic information - Conformance and testing |
| BS ISO 19106-2004 |
地理信息.概要 |
|
| BS ISO 19107-2003 |
地理信息.空間圖解 |
(Geographic information - Spatial schema) |
| BS ISO 19108-2002 |
地理信息.暫存概要 |
Geographic information - Temporal schema |
| BS ISO 19109-2005 |
地理信息.應用圖表規則 |
|
| BS ISO 19110-2005 |
地理信息.特征分類法 |
|
| BS ISO 19111-2003 |
地理信息.利用坐標系的空間參考 |
(Geographic information - Spatial referencing by coordinates) |
| BS ISO 19113-2003 |
地理信息.質量原理 |
Geographic information - Quality principles |
| BS ISO 19114-2003 |
地理信息.質量評價規程 |
(Geographic information - Quality evaluation procedures) |
| BS ISO 19115-2003 |
地理信息.數據 |
(Geographic information - Metadata) |
| BS ISO 19116-2005 |
地理信息.定位服務 |
|
| BS ISO 19125-1-2005 |
地理信息.簡單特征存取.通用體系結構 |
|
| BS ISO 19125-2-2005 |
地理信息.簡單特征存取.SQL選擇 |
|
| BS ISO 1919-1998 |
道路車輛.平底座M14×1.25火花塞和汽缸上火花塞座 |
Road vehicles - M14 x 1,25 spark plugs with flat seating and their cylinder head housings |
| BS ISO 1922-2001 |
硬質多孔塑料.剪切強度的測定 |
Rigid cellular plastics - Determination of shear strength |
| BS ISO 19238-2004 |
輻射防護.進行細胞遺傳學生物劑量測定的工作實驗室的性能標準 |
|
| BS ISO 1924-3-2005 |
紙和紙板.抗張性能的測定.恒速拉伸法(100 mm/min) |
|
| BS ISO 1925-2001 |
機械振動.平衡.詞匯 |
Mechanical vibration - Balancing - Vocabulary |
| BS ISO 19318-2005 |
表面化學分析.X射線光電光譜法.電荷控制和電荷校正方法的報告 |
|
| BS ISO 19378-2003 |
潤滑劑、工業用油和相關產品(L級).機床潤滑劑.等級和規范 |
(Lubricants, industrial oils and related products (class L) - Machine-tool lubricants - Categories and specifications) |
| BS ISO 19379-2003 |
船舶和海上技術.ECS數據庫.內容、質量、更新和測試 |
(Ships and marine technology - ECS databases - Content, quality, updating and testing) |
| BS ISO 1940-1-2005 |
機械振動.在恒定(剛性)狀態下轉子的平衡質量要求.平衡公差的規范和檢定 |
|
| BS ISO 19438-2004 |
內燃機用柴油燃料和汽油過濾器.用粒子計數和污物滯留量測定過濾效率 |
|
| BS ISO 19438-2004 |
內燃機用柴油燃料和汽油過濾器.用粒子計數和污物滯留量測定過濾效率 |
|
| BS ISO 1957-2000 |
機織地板覆蓋物.物理試驗用樣品的選擇和剪裁 |
Machine-made textile floor coverings - Selection and cutting of specimens for physical tests |
| BS ISO 19739-2004 |
天然氣.用氣相色譜法測定硫化合物的含量 |
|
| BS ISO 1977-2001 |
輸送鏈、附件和鏈輪 |
Conveyor chains, attachments and sprockets |
| BS ISO 19819-2004 |
金屬材料.液態氦中的抗拉試驗 |
|
| BS ISO 1984-1-2001 |
固定高度的臺面的手工控制的銑床的試驗條件.精度試驗.帶有水平主軸的機器 |
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with horizontal spindle |
| BS ISO 1984-2-2001 |
固定高度的臺面的手工控制的銑床的試驗條件.精度試驗.帶有垂直主軸的機器 |
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with vertical spindle |
| BS ISO 1985-1998 |
機床.有往復工作臺的立式平面磨床的試驗條件.精度試驗 |
Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy |
| BS ISO 1986-1-2001 |
臥軸矩臺平面磨床的驗收條件.精度檢驗.工作臺長度達到1600mm的機床 |
Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Machines with a table length of up to 1600mm |
| BS ISO 19860-2005 |
燃氣輪機.燃氣輪機裝置的數據獲取和趨勢監控系統要求 |
|
| BS ISO 199-1998 |
滾動軸承.止推滾珠軸承.公差 |
Rolling bearings - Thrust bearings - Tolerances |
| BS ISO 1997-1993 |
粒狀軟木和軟木粉.分類、特性和包裝 |
Granulated cork and cork powder - Classification, properties and packing |
| BS ISO 1998-1-1999 |
石油工業.術語.原料和產品 |
Petroleum industry - Terminology - Raw materials and products |
| BS ISO 1998-2-1999 |
石油工業.術語.性質和試驗 |
Petroleum industry - Terminology - Properties and tests |
| BS ISO 1998-3-1999 |
石油工業.術語.第3部分:勘探和開采 |
Petroleum industry - Terminology - Exploration and production |
| BS ISO 1998-4-1999 |
石油工業.術語.第4部分:煉制 |
Petroleum industry - Terminology - Refining |
| BS ISO 1998-5-1999 |
石油工業.術語.第5部分:運輸,儲存,分配 |
Petroleum industry - Terminology - Transport, storage, distribution |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com