標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 11553-1-2005 |
機械安全.激光加工機械.第1部分:一般安全要求 |
|
| DIN EN ISO 11554-1999 |
光學和光學儀器.激光器及其相關設備.激光束功率,能量和時間特性參數的檢驗方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:1998); German version EN ISO 11554:1998) |
| DIN EN ISO 11562-1998 |
幾何產品規范.表面紋理:輪廓法.相位校正過濾器的計量學特性 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters (ISO 11562:1996); German version EN ISO 11562:1997) |
| DIN EN ISO 1157-1999 |
塑料.稀釋溶液中的醋酸纖維素.粘度值和粘度比的測定 |
(Plastics - Cellulose acetate in dilute solution - Determination of viscosity number and viscosity ratio (ISO 1157:1990); German version EN ISO 1157:1999) |
| DIN EN ISO 1158-1998 |
塑料.氯乙烯均聚物和異分子共聚物.氯含量測定 |
(Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998); German version EN ISO 1158:1998) |
| DIN EN ISO 11591-2001 |
發動機驅動的小型船舶.駕駛位置的視野 |
(Small craft, engine-driven - Field of vision from helm position (ISO 11591:2000); German version EN ISO 11591:2000) |
| DIN EN ISO 11592-2002 |
小于8米長外殼的小艇.最大推動力的額定值測定 |
(Small craft less than 8 m length of hull - Determination of maximum propulsion power rating (ISO 11592:2001); German version EN ISO 11592:2001) |
| DIN EN ISO 11593-1998 |
工業操作機器人.自動終端操縱交換系統.特性的術語和描述 |
(Manipulating industrial robots - Automatic end effector exchange systems - Vocabulary and presentation of characteristics (ISO 11593:1996); German version EN ISO 11593:1997) |
| DIN EN ISO 11600-2004 |
房屋建筑.連接件.密封件的分類和要求 |
|
| DIN EN ISO 11606-2002 |
船舶和航海技術.航海用電磁羅盤 |
(Ships and marine technology - Marine electromagnetic compasses (ISO 11606:2000); German version EN ISO 11606:2001) |
| DIN EN ISO 11608-1-2001 |
醫用筆式注射器.第1部分:筆式注射器.要求和試驗方法 |
(Pen-injectors for medical use - Part 1: Pen-injectors; Requirements and test methods (ISO 11608-1:2000); German version EN ISO 11608-1:2000) |
| DIN EN ISO 11608-2-2001 |
醫用筆式注射器.第2部分:針.要求和試驗方法 |
(Pen-injectors for medical use - Part 2: Needles; Requirements and test methods (ISO 11608-2:2000); German version EN ISO 11608-2:2000) |
| DIN EN ISO 11608-3-2001 |
醫用筆式注射器.第3部分:成品容器.要求和試驗方法 |
(Pen-injectors for medical use - Part 3: Finished cartridges; Requirements and test methods (ISO 11608-3:2000); German version EN ISO 11608-3:2000) |
| DIN EN ISO 11609-1998 |
牙科學.牙膏.要求,試驗方法和標志 |
(Dentistry - Toothpastes - Requirements, test methods and marking (ISO 11609:1995); German version EN ISO 11609:1998) |
| DIN EN ISO 11623-2003 |
可運輸儲氣瓶.復合儲氣瓶的定期檢測和測試 |
(Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders (ISO 11623:2002); German version EN ISO 11623:2002) |
| DIN EN ISO 1163-1-1999 |
塑料.未增塑聚氯乙烯(PVC-U)模塑與注塑材料.第1部分:命名與基本規范 |
(Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995); German version EN ISO 1163-1:1999) |
| DIN EN ISO 1163-2-1999 |
塑料.未增塑聚氯乙烯(PVC-U)模塑與注塑材料.第2部分:試樣制備與特性測定 |
(Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995); German version EN ISO 1163-2:1999) |
| DIN EN ISO 11640-1998 |
皮革.色牢度試驗.周期性往復磨擦的色牢度 |
(Leather - Test for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:1993); German version EN ISO 11640:1998) |
| DIN EN ISO 11641-2004 |
皮革.色牢度試驗.耐汗?jié)n的色牢度 |
(Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:1993); German version EN 11641:2003) |
| DIN EN ISO 11641-2004 |
皮革.色牢度試驗.耐汗?jié)n的色牢度 |
|
| DIN EN ISO 11642-1998 |
皮革.色牢度試驗.耐水洗的色牢度 |
(Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:1993); Deutsche Fassung EN ISO 11642:1998) |
| DIN EN ISO 11643-1998 |
皮革.色牢度試驗.小樣品耐干洗液的色牢度 |
(Leather - Tests for colour fastness - Colour fastness of small samples to dry-cleaning solutions (ISO 11643:1993); German version EN ISO 11643:1998) |
| DIN EN ISO 11644-2004 |
皮革.涂層粘著牢度測定方法 |
(Leather - Test for adhesion of finish (ISO 11644:1993); German version EN ISO 11644:2003) |
| DIN EN ISO 11644-2004 |
皮革.涂層粘著牢度測定方法 |
|
| DIN EN ISO 11646-1998 |
皮革.面積的測量 |
(Leather - Measurement of area (ISO 11646:1993); German version EN ISO 11646:1998) |
| DIN EN ISO 11654-1997 |
聲學.建筑物中用的聲吸收器.聲音吸收評定 |
(Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997); German version EN ISO 11654:1997) |
| DIN EN ISO 11667-1999 |
纖維增強塑料.模壓化合物和聚酯膠片.樹脂,纖維增強和礦物填料含量的測定.溶解方法 |
(Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999) |
| DIN EN ISO 11668-2001 |
涂料和清漆用粘結劑.氯化聚合樹脂.通用試驗方法 |
(Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test (ISO 11668:1997); German version EN ISO 11668:2001) |
| DIN EN ISO 11670-1999 |
激光與激光相關儀器.激光束參數試驗方法.束的位置穩定性 |
(Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:1999); German version EN ISO 11670:1999) |
| DIN EN ISO 11674-2002 |
船舶和航海技術.航向控制系統 |
(Ships and marine technology - Heading control systems (ISO 11674:2000); German version EN ISO 11674:2001) |
| DIN EN ISO 11680-1-2002 |
林業機械.動力桿式修枝鋸的安全要求和試驗.第1部分:側掛式桿式修枝鋸 |
(Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with integral combustion engine (ISO 11680-1:2000); German version EN ISO 11680-1:2000 + AC:2002) |
| DIN EN ISO 11680-2-2002 |
林業機械.動力桿式修枝鋸的安全要求和試驗.第2部分:攜背負式桿式修枝鋸 |
(Machinery for forestry - Safety requirements and testing for pole-mounted pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000); German version EN ISO 11680-2:2000 + AC:2002) |
| DIN EN ISO 11681-1-2004 |
林業機械.便攜式鏈鋸的安全要求和試驗.第1部分:林業專用鏈鋸 |
|
| DIN EN ISO 11681-2-1998 |
林業機械.便攜式電鋸.安全要求和試驗.第2部分:樹木砍伐用電鋸 |
(Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:1998); German version EN ISO 11681-2:1998) |
| DIN EN ISO 11681-2-2004 |
林業機械.便攜式鏈鋸的安全要求和試驗.第2部分:修枝鋸 |
|
| DIN EN ISO 11683-1997 |
包裝.危險接觸警告.要求 |
(Packaging - Tactile warnings of danger - Requirements (ISO 11683:1997); German version EN ISO 11683:1997) |
| DIN EN ISO 11688-1-1998 |
聲學.低噪音機械和設備的設計用推薦規程.第1部分:計劃 |
(Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995); German version EN ISO 16688-1:1998) |
| DIN EN ISO 11688-2-2001 |
聲學.低噪聲機械和設備設計的推薦實施規程.第2部分:低噪聲設計的物理學說明 |
(Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998); German version EN ISO 11688-2:2000) |
| DIN EN ISO 11689-1997 |
聲學.機器和設備躁音釋放數值的比較方法 |
(Acoustics - Procedure for the comparison of noise emission-data for machinery and equipment (ISO 11689:1996); German version EN ISO 11689:1996) |
| DIN EN ISO 11690-1-1997 |
聲學.裝有機器的工作場地較弱噪音設計的規程.第1部分:一般原理 |
(Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:1996); German version EN ISO 11690-1:1996) |
| DIN EN ISO 11690-2-1997 |
聲學.裝有機器的工作場地較弱噪音設計的規程.第2部分:降低噪音的措施 |
(Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:1996); German version EN ISO 11690-2:1996) |
| DIN EN ISO 11690-3-1999 |
聲學.低噪音車間(含機械噪音)設計的推薦實用規程.第3部分:工作室中噪音降低和聲音的傳播 |
(Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms (ISO/TR 11690-3:1997); German version EN ISO 11690-3:1998) |
| DIN EN ISO 11691-1996 |
無流體管道中消聲器介入衰減程度的測量.精度等級3的實驗室法 |
(Acoustics - Determination of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:1995) |
| DIN EN ISO 1172-1998 |
紡織玻璃纖維增強塑料.預浸料坯,模塑材料及疊層板材.紡織玻璃纖維和礦物填充料含量的測定.煅燒法 |
(Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods (ISO 1172:1996); German version EN ISO 1172:1998) |
| DIN EN ISO 11721-1-2001 |
織物.含纖維素織物對微生物耐性的測定.土壤埋試驗.第1部分:腐爛延遲完成的評價 |
(Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 1: Assessment of rot-retardant finishing (ISO 11721-1:2001); German version EN ISO 11721-1:2001) |
| DIN EN ISO 11732-1997 |
水質.用水流分析(CFA和FIA)和光譜檢測法測定氨氮 |
(Water quality - Determination of ammonium nitrogen by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:1997); German version EN ISO 11732:1997) |
| DIN EN ISO 11732-2005 |
水質.銨氮的測定.水流分析(CFA和FIA)和光譜檢測法 |
|
| DIN EN ISO 11733-1998 |
水質.水介質中有機化合物的消除和可生物降解性的評定.活性污泥模擬試驗 |
(Water quality - Evaluation of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:1995); German version EN ISO 11733:1998) |
| DIN EN ISO 11733-2004 |
水質.水介質中有機化合物的生物降解和去除率的測定.活性污泥模擬試驗 |
|
| DIN EN ISO 11734-1998 |
水質.腐泥中有機化合物的`最終`厭氧生物降解能力評定.生物氣體生產的測量方法 |
(Water quality - Evaluation of the “ultimate“ anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production (ISO 11734:1995); German version EN ISO 11734:1998) |
| DIN EN ISO 11737-2-2000 |
醫療器械的滅菌.微生物法.第2部分:滅菌證實過程的無菌檢驗 |
(Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the validation of a sterilization process (ISO 11737-2:1998); German version EN ISO 11737-2:2000) |
| DIN EN ISO 11758-1997 |
橡膠和塑料軟管.氙弧燈的曝光.顏色和外觀的變化 |
(Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance (ISO 11758:1995); German version EN ISO 11758:1997) |
| DIN EN ISO 11806-1997 |
農業和林業機械.便攜手提燃機驅動叢林修剪機和割草機.安全 |
(Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997); German version EN ISO 11806:1997) |
| DIN EN ISO 11807-1-2005 |
集成光學.詞匯.第1部分:基本術語和符號 |
|
| DIN EN ISO 11807-1-2005 |
集成光學.詞匯.第1部分:基本術語和符號 |
|
| DIN EN ISO 11807-2-2005 |
集成光學.詞匯.第2部分:分類用術語 |
|
| DIN EN ISO 11807-2-2005 |
集成光學.詞匯.第2部分:分類用術語 |
|
| DIN EN ISO 1181-2005 |
纖維繩索.馬尼拉麻和西沙爾麻繩索.3、4和8股繩 |
|
| DIN EN ISO 11810-1-2005 |
激光和激光有關設備.手術布單和/或病人保護用覆蓋物耐激光性試驗方法和分類.第1部分:基本點燃和穿透性 |
|
| DIN EN ISO 11810-1-2005 |
激光和激光有關設備.手術布單和/或病人保護用覆蓋物耐激光性試驗方法和分類.第1部分:基本點燃和穿透性 |
|
| DIN EN ISO 11810-2003 |
光學和光學儀器.激光和激光有關設備.手術布單和/或病人防護覆蓋層耐激光的試驗方法 |
(Optics and optical instruments - Laser and laser-related equipment - Test method for the laser-resistance of surgical drapes and/or patient protective covers (ISO 11810:2002); German version EN ISO 11810:2002) |
| DIN EN ISO 11812-2003 |
小艇.水密座艙和快速排干座艙 |
(Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001); German version EN ISO 11812:2001) |
| DIN EN ISO 11816-1-2000 |
牛奶和奶制品.熒光計法測定堿性磷酸酶的活性.第1部分:牛奶和牛奶飲料 |
(Milk and milk products - Determination of alkaline phosphatase activity using a fluorimetric method - Part 1: Milk and milk-based drinks (ISO 11816-1:1997); German version EN ISO 11816-1:2000) |
| DIN EN ISO 11816-2-2003 |
奶和奶制品.堿性磷酸酶的活性測定.第2部分:乳酪的熒光計法 |
(Milk and milk products - Determination of alkaline phosphatase activity - Part 2: Fluorometric method for cheese (ISO 11816-2:2003); German version EN ISO 11816-2:2003) |
| DIN EN ISO 11819-1-2002 |
聲學.路面對交通噪聲影響的測量.第1部分:旁路統計法 |
(Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical pass-by method (ISO 11819-1:1997); German version EN ISO 11819-1:2001) |
| DIN EN ISO 1182-2002 |
建筑物產品對火焰試驗的反應.不可燃性試驗 |
(Reaction to fire tests for building products - Non-combustibility tests (ISO 1182:2002); German version EN ISO 1182:2002) |
| DIN EN ISO 11820-1997 |
聲學.現場用消聲器的測量 |
(Acoustics - Measurements on silencers in situ (ISO 11820:1996); German version EN ISO 11820:1996) |
| DIN EN ISO 11821-1997 |
聲學.測量插入狀態下可移動助音板的消音 |
(Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997); German version EN ISO 11821:1997) |
| DIN EN ISO 1183-1-2004 |
塑料.非泡沫塑料的密度測定方法.第1部分:浸入法、液體比重瓶法和滴定法 |
|
| DIN EN ISO 1183-2-2004 |
塑料.非泡沫塑料的密度測定方法.第2部分:密度梯度柱法 |
|
| DIN EN ISO 1183-3-2000 |
塑料.非多孔塑料的密度測定方法.第3部分:氣體比重瓶測量法 |
(Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999) |
| DIN EN ISO 11857-2002 |
紡織地板覆蓋物.測定剝離耐力 |
(Textile floor coverings - Determination of resistance to delamination (ISO 11857:1999); German version EN ISO 11857:2002) |
| DIN EN ISO 11885-1998 |
水質.用引導耦合等離子體原子發射光譜法測定33種素 |
(Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy (ISO 11885:1996); German version EN ISO 11885:1997) |
| DIN EN ISO 11890-1-2002 |
涂料和清漆.揮發性有機化合物含量的測定.第1部分:差別法 |
(Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2000); German version EN ISO 11890-1:2001) |
| DIN EN ISO 11890-2-2002 |
涂料和清漆.揮發性有機化合物含量的測定.第2部分:氣相色譜法 |
(Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gaschromatographic method (ISO 11890-2:2000); German version EN ISO 11890-2:2001) |
| DIN EN ISO 11897-2001 |
包裝.熱塑軟薄膜制袋.折邊處的撕裂擴展試驗 |
(Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999); German version EN ISO 11897:2001) |
| DIN EN ISO 119-1998 |
塑料.酚醛塑料模制件.游離酚的測定.碘量法 |
(Plastics - Phenol-formaldehyde mouldings - Determination of free phenols; Iodometric method (ISO 119:1977); German version EN ISO 119:1998) |
| DIN EN ISO 11904-1-2003 |
聲學.從接近耳朵的聲源處測定聲發射強度.利用真耳中傳聲器技術(MIRE技術) |
(Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 1: Technique using microphone in real ear (MIRE-technique) (ISO 11904-1:2002); German version EN ISO 11904-1:2002) |
| DIN EN ISO 11904-2-2005 |
聲學.從接近耳朵的聲源處測定聲排放強度.第2部分:利用人體模型技術 |
|
| DIN EN ISO 11905-1-1998 |
水質.氮的測定.第1部分:用過氧焦硫酸鹽進行氧化溶解法測定氮含量 |
(Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate (ISO 11905-1:1997); German version prEN ISO 11905-1:1998) |
| DIN EN ISO 11908-1998 |
漆和涂料用粘合劑.胺樹脂.一般檢驗法 |
(Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996); German version EN ISO 11908:1998) |
| DIN EN ISO 11909-1998 |
清漆和涂料用粘合劑.聚異氰酸樹脂.一般檢驗法 |
(Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:1996); German version EN ISO 11909:1998) |
| DIN EN ISO 11925-2-2002 |
建筑產品的對火反應試驗.第2部分:火焰直接作用下建筑產品的可燃性. |
(Reaction to fire tests for building products - Part 2: Ignitability when subjected to direct impingement of flame (ISO 11925-2:2002); German version EN ISO 11925-2:2002) |
| DIN EN ISO 11957-1997 |
聲學.隔聲間隔音測量.實驗室內和在使用情況下的測量 |
(Acoustics - Determination of sound insulation performance of sound protecting cabins - Laboratory and in situ measurements (ISO 11957:1996); German version EN ISO 11957:1996) |
| DIN EN ISO 11960-1998 |
石油和天然氣工業.蓄水管和套管用鋼管 |
(Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:1996); German version EN ISO 11960:1998) |
| DIN EN ISO 11960-2003 |
石油和天然氣工業.油井套管或油管用鋼管 |
(Petroleum and natural gas industries - Steel pipes for use as casting or tubing for wells (ISO 11960:2001 + Cor. 1:2002); German and English version EN ISO 11960:2001 + AC:2002) |
| DIN EN ISO 11960-2005 |
石油和天然氣工業.油井套管或油管用鋼管 |
|
| DIN EN ISO 11960-2005 |
石油和天然氣工業.油井套管或油管用鋼管 |
|
| DIN EN ISO 11961-1997 |
石油和天然氣工業.鉆井桿用鋼管.要求 |
(Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification (ISO 11961:1996); German version EN ISO 11961:1996) |
| DIN EN ISO 11963-1995 |
塑料.聚碳酸酯薄板材.交貨類型,尺寸和特性 |
(Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:1995); German version EN ISO 11963:1995) |
| DIN EN ISO 11969-1996 |
水質.砷的測定.原子吸收分光光度法(氫化技術) |
(Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996); German version EN ISO 11969:1996) |
| DIN EN ISO 11978-2000 |
眼科光學.接觸鏡片和接觸鏡片護理產品.制造商提供的信息 |
(Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000); German version EN ISO 11978:2000) |
| DIN EN ISO 11979-1-2000 |
眼科植入物.眼內晶狀體透鏡.第1部分:詞匯 |
(Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:1999); German version EN ISO 11979-1:1999) |
| DIN EN ISO 11979-2 Berichtigung 1-2005 |
眼科植入物.眼內透鏡.光學特性和試驗方法 |
|
| DIN EN ISO 11979-2 Berichtigung 1-2005 |
眼科植入物.眼內透鏡.光學特性和試驗方法 |
|
| DIN EN ISO 11979-2-2000 |
眼科植入.眼內晶狀體透鏡.第2部分:光學特性和試驗方法 |
(Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods (ISO 11979-2:1999); German version EN ISO 11979-2:1999) |
| DIN EN ISO 11979-4-2000 |
眼科植入物.眼內透鏡.第4部分:貼標簽和信息 |
(Ophthalmic implants - Intraocular lenses - Part 4: Labelling and information (ISO 11979-4:2000); German version EN ISO 11979-4:2000) |
| DIN EN ISO 11980-1998 |
眼科光學.接觸鏡片和接觸鏡片護理劑.臨床檢驗指南 |
(Opthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:1997); German version EN ISO 11980:1997) |
| DIN EN ISO 11981-1999 |
眼科光學.接觸鏡片和接觸鏡片保護產品.帶接觸鏡片的接觸鏡片保護產品物理一致性的測定 |
(Ophthalmic optics - Contact lenses and contact lens care products - Determination of the physical compatibility of contact care products lenses with contact lenses (ISO 11981:1999); German version EN ISO 11981:1999) |
| DIN EN ISO 11984-2000 |
眼科光學.接觸鏡片.剛性鏡片彎曲和斷裂強度的測定 |
(Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage (ISO 11984:1999); German version EN ISO 11984:1999) |
| DIN EN ISO 11985-1998 |
眼科光學.接觸鏡片.由于紫外線和可視射線作用造成的老化(試管法) |
(Opthalmic optics - Contact lenses - Ageing by exposure to UV and visible radiation (in vitro method) (ISO 11985:1997); German version EN ISO 11985:1997) |
| DIN EN ISO 11986-2000 |
眼科光學.接觸鏡片和接觸鏡片護理產品.緊張和放松狀態下保持性的測定指南 |
(Ophthalmic optics - Contact lenses and contact lens care products - Guidelines for the determination of preservative uptake and release (ISO 11986:1999); German version EN ISO 11986:2000) |
| DIN EN ISO 11987-1998 |
眼科光學.接觸鏡片.支架壽命的測定 |
(Ophthalmic optics - Contact lenses - Determination of shelf-life (ISO 11987:1997); German version EN ISO 11987:1997) |
| DIN EN ISO 11990-1999 |
光學和光學儀器.激光和激光相關設備.氣管導管柄激光抗性的測定 |
(Optics and optical instruments - Laser and laser-related equipment - Determination of laser resistance of tracheal tube shafts (ISO 11990:1999); German version EN ISO 11990:1999) |
| DIN EN ISO 11998-2001 |
涂料和清漆.涂層耐濕式洗滌和清潔度測定 |
(Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:1998); German version EN ISO 11998:2001) |
| DIN EN ISO 120-1998 |
塑料.酚醛塑料模制件.游離氨和銨化合物的測定.比色法 |
(Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds; Colorimetric comparison method (ISO 120:1977); German version EN ISO 120:1998) |
| DIN EN ISO 12001-1997 |
聲學.機械和儀器的產生噪音輻射.噪音測量標準的制定和結構形成的規則 |
(Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996); German version EN ISO 12001:1996) |
| DIN EN ISO 12005-1999 |
激光和激光相關設備.激光束參數的試驗方法.偏振 |
(Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:1999); German version EN ISO 12005:1999) |
| DIN EN ISO 12017-1996 |
塑料.聚甲基丙烯酸甲酯雙合板和三合板.試驗方法 |
(Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:1995); German version EN ISO 12017:1996) |
| DIN EN ISO 12020-2000 |
水的質量.鋁的測定.用原子吸收光譜法 |
(Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997); German version EN ISO 12020:2000) |
| DIN EN ISO 12048-2001 |
包裝.完全滿運輸包裝件.利用壓縮試驗機的壓縮試驗和堆積試驗 |
(Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994); German version EN ISO 12048:2000) |
| DIN EN ISO 12058-1-2002 |
塑料.使用落球式粘度計測定粘度.第1部分:斜管法 |
(Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997); German version EN ISO 12058-1:2002) |
| DIN EN ISO 1207-1994 |
一字槽圓柱頭螺釘.A級產品 |
(Slotted cheese head screws - Product grade A (ISO 1207:1992); German version EN ISO 1207:1994) |
| DIN EN ISO 12085-1998 |
幾何產品規范(GPS).表面紋理:外形法.主要參數 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997) |
| DIN EN ISO 12086-1-2000 |
塑料.含氟聚合物的分散,模塑和擠壓材料.第1部分:標識和規范 |
(Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation and specification (ISO 12086-1:1995); German version EN ISO 12086-1:1999) |
| DIN EN ISO 12086-2-2000 |
塑料.含氟聚合物的分散,模塑和擠壓材料.第2部分:試樣制備和性能測定 |
(Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:1995); German version EN ISO 12086-2:1999) |
| DIN EN ISO 12100-1-2004 |
機械安全.基本概念和設計通則.第1部分:基本術語、方法學 |
|
| DIN EN ISO 12100-2-2004 |
機械安全.設計用基本概念和總則.第2部分:技術總則 |
|
| DIN EN ISO 1211-2001 |
牛奶.脂肪含量的測定.重量分析法(基準方法) |
(Milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1211:1999); German version EN ISO 1211:2001) |
| DIN EN ISO 12114-1997 |
纖維增強塑料.熱固性模塑化合物和聚酯膠片.固化特性的測定 |
(Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997); German version EN ISO 12114:1997) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com