標準號 |
中文名稱 |
英文名稱 |
| ISO 7176-7-1998 |
輪椅.第7部分:座椅和輪子尺寸的測量 |
Wheelchairs - Part 7: Measurement of seating and wheel dimensions |
| ISO 7176-8-1998 |
輪椅.第8部分:靜態強度、沖擊強度和疲勞強度的要求和試驗方法 |
Wheelchairs - Part 8: Requirements and test methods for static, impact and fatigue strengths |
| ISO 7176-9-2001 |
輪椅.第9部分:電動輪椅氣候試驗 |
Wheelchairs - Part 9: Climatic tests for electric wheelchairs |
| ISO 718-1990 |
實驗室玻璃器皿.熱沖擊和熱沖擊強度.試驗方法 |
Laboratory glassware; thermal shock and thermal shock endurance; test methods |
| ISO 7180-1986 |
氣壓傳動.氣缸.缸筒和氣口螺紋規格 |
Pneumatic fluid power; Cylinders; Bore and port thread sizes |
| ISO 7181-1991 |
液壓傳動.液壓缸.缸筒和活塞桿截面比 |
Hydraulic fluid power; cylinders; bore and rod area ratios |
| ISO 7182-1984 |
聲學.在操作者位置上測量鏈鋸發出的氣載的噪音 |
Acoustics; Measurement at the operator`s position of airborne noise emitted by chain saws |
| ISO 7183-1986 |
壓縮空氣干燥機.規范和試驗 |
Compressed air dryers; Specifications and testing |
| ISO 7183-2-1996 |
壓縮空氣干燥機.第2部分:性能等級 |
Compressed air dryers - Part 2: Performance ratings |
| ISO 7186-1996 |
污水工程用球墨鑄鐵 |
Ductile iron products for sewage applications |
| ISO 7187-1995 |
攝影技術.直接彩色照片材料.ISO感光度的測定 |
Photography - Materials for direct-positive colour-print cameras - Determination of ISO speed |
| ISO 7188-1994 |
聲學.在典型的城市行車條件下客車發出的噪音測量 |
Acoustics - Measurement of noise emitted by passenger cars under conditions representative of urban driving |
| ISO 7189-1983 |
連續機械裝卸設備.擋板式輸送機.設計規則 |
Continuous mechanical handling equipment; Apron conveyors; Design rules |
| ISO 719-1985 |
玻璃.玻璃晶粒在98℃下的耐水解性.試驗方法和分類 |
Glass; Hydrolytic resistance of glass grains at 98 degrees C; Method of test and classification |
| ISO 7190-1981 |
連續機械裝卸設備.斗式提升機.分類 |
Continuous mechanical handling equipment; Bucket elevators; Classification Bilingual edition |
| ISO 7193-1985 |
輪椅.最大輪廓尺寸 |
Wheelchairs; Maximum overall dimensions |
| ISO 7194-1983 |
封閉管道內液體流量測量.利用流速計或皮托靜壓管對圓形管道中不均勻成旋渦狀態流量測量的速度--面積法 |
Measurement of fluid flow in closed conduits; Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes |
| ISO 7195-1993 |
六氟化鈾的運輸包裝 |
Packaging of uranium hexafluoride (UF) for transport |
| ISO 7196-1995 |
聲學.次聲測量用頻率加權特性 |
Acoustics - Frequency-weighting characteristic for infrasound measurements |
| ISO 7197-1997 |
神經外科植入物.無菌的、一次性使用的腦積水分流管和組件 |
Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components |
| ISO 7198-1998 |
心血管植入物.血管修復術 |
Cardiovascular implants - Tubular vascular prostheses |
| ISO 7199-1996 |
心血管植入物和人工器官.血液-氧氣交換機(氧合器) |
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) |
| ISO 720-1985 |
玻璃.玻璃晶粒在121 ℃下的耐水解性.試驗方法和分類 |
Glass; Hydrolytic resistance of glass grains at 121 degrees C; Method of test and classification |
| ISO 7200-1984 |
技術制圖.標題欄 |
Technical drawings; Title blocks |
| ISO 7200-2004 |
技術產品文件.標題欄和文件標題中的數據字段 |
|
| ISO 7200-2004 |
技術產品文件.標題欄和文件標題中的數據字段 |
|
| ISO 7201-1-1989 |
火災防護措施.滅火介質.鹵代烴.第1部分:聚四氟乙烯1211和聚四氟乙烯1301規范 |
Fire protection; fire extinguishing media; halogenated hydrocarbons; part 1: specifictions for halon 1211 and halon 1301 |
| ISO 7201-2-1991 |
火災防護措施.滅火介質.鹵代烴.第2部分:聚四氟乙烯1211和聚四氟乙烯1301安全操作和運輸規程的實施標準 |
Fire extinguishing media; halogenated hydrocarbons; part 2: code of practice for safe handling and transfer procedures of halon 1211 and halon 1301 |
| ISO 7202-1987 |
防火.滅火介質.粉劑 |
Fire protection; Fire extinguishing media; Powder |
| ISO 7203-1-1995 |
滅火器介質.泡末濃縮物.第1部分:不溶于水的液體頂施用低膨脹泡沫濃縮物規范 |
Fire extinguishing media - Foam concentrates - Part 1: Specification for low expansion foam concentrates for top application to water-immiscible liquids |
| ISO 7203-2-1995 |
滅火器介質.泡末濃縮物.第2部分:不溶于水的液體頂施用高膨脹泡沫濃縮物及介質規范 |
Fire extinguishing media - Foam concentrates - Part 2: Specification for medium and high expansion foam concentrates for top application to water-immiscible liquids |
| ISO 7203-3-1999 |
滅火介質.泡末濃縮物.第3部分:可溶于水的液體頂施用低膨脹泡沫濃縮物規范 |
Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for top application to water-miscible liquids |
| ISO 7205-1986 |
放射性核檢驗儀.為固定裝置設計的檢驗儀 |
Radionuclide gauges; Gauges designed for permanent installation |
| ISO 7206-1-1995 |
外科植入物.部分和全部髖關節修復術.第1部分:分類、尺寸標注 |
Implants for surgery - Partial and total hip joint prostheses - Part 1: Classification and designation of dimensions |
| ISO 7206-10-2003 |
外科植入物.部分和全髖關節假體.第10部分:預制股骨頭耐靜荷載的測定 |
|
| ISO 7206-2-1996 |
外科植入物.部分和全部髖關節修復術.第2部分:金屬的、陶瓷的和塑料等等材料制的關節表面 |
Implants for surgery - Partial and total hip joint prostheses - Part 2: Articulating surfaces made of metallic, ceramic and plastics materials |
| ISO 7206-4-2002 |
外科植入物.部分和全部髖關節修復術.第4部分:干股骨神經組件耐久性能的測定 |
Implants for surgery - Partial and total hip joint prostheses - Part 4: Determination of endurance properties of stemmed femoral components |
| ISO 7206-6-1992 |
外科植入物.部分和全部髖關節修復術.第6部分:干股骨組件的頭和頸部耐久性能的測定 |
Implants for surgery; partial and total hip joint prostheses; part 6: determination of endurance properties of head and neck region of stemmed femoral components |
| ISO 7206-8-1995 |
外科植入物.部分和全部髖關節修復術.第8部分:無扭曲使用股骨部件的耐久性能 |
Implants for surgery - Partial and total hip joint prostheses - Part 8: Endurance performance of stemmed femoral components with application of torsion |
| ISO 7207-1-1994 |
外科植入物.部分和全部膝關節修復術用股骨和脛骨組和件.第1部分:分類、定義和尺寸要求 |
Implants for surgery - Femoral and tibial components for partial and total knee joint prostheses - Part 1: Classification, definitions and designation of dimensions |
| ISO 7207-2-1998 |
外科植入物.部分和全部膝關節修復術用組件.第2部分:金屬、陶瓷和塑料材料制關節表面 |
Implants for surgery - Components for partial and total knee-joint prostheses - Part 2: Articulating surfaces made of metal, ceramic and plastics materials |
| ISO 7208-1999 |
脫脂乳、乳清和乳酪.脂肪含量的測定.重量分析法(參照法) |
Skimmed milk, whey and buttermilk - Determination of fat content - Gravimetric method (Reference method) |
| ISO 721-1991 |
鑿巖設備.整體鉆桿 |
Rock drilling equipment; integral stems |
| ISO 7210-1997 |
卷煙煙霧常規分析器.補充試驗方法 |
Routine analytical cigarette-smoking machines - Additional test methods |
| ISO 7211-1-1984 |
紡織品.機織物.結構.分析方法.第1部分:穿綜、穿筘及提綜的織造圖和平面的表示方法 |
Textiles; Woven fabrics; Construction; Methods of analysis; Part 1 : Methods for the presentation of a weave diagram and plans for drafting, denting and lifting |
| ISO 7211-2-1984 |
紡織品.機織物.結構.分析方法.第2部分:單位長度紗線數的測定 |
Textiles; Woven fabrics; Construction; Methods of analysis; Part 2 : Determination of number of threads per unit length |
| ISO 7211-3-1984 |
紡織品.機織物.結構.分析方法.第3部分:織物紗線卷曲性的測定 |
Textiles; Woven fabrics; Construction; Methods of analysis; Part 3 : Determination of crimp of yarn in fabric |
| ISO 7211-4-1984 |
紡織品.機織物.結構.分析方法.第4部分:無纖維紗捻度的測定 |
Textiles; Woven fabrics; Construction; Methods of analysis; Part 4 : Determination of twist in yarn removed from fabric |
| ISO 7211-5-1984 |
紡織品.機織物.結構.分析方法.第5部分:無纖維紗線密度的測定 |
Textiles; Woven fabrics; Construction; Methods of analysis; Part 5 : Determination of linear density of yarn removed from fabric |
| ISO 7211-6-1984 |
紡織品.機織物.結構.分析方法.第6部分:織物單位面積經紗和緯紗質量(物質)的測定 |
Textiles; Woven fabrics; Construction; Methods of analysis; Part 6 : Determination of the mass of warp and weft per unit area of fabric |
| ISO 7212-1986 |
電離輻射防護層.50-100mm厚的鉛屏蔽裝置 |
Enclosures for protection against ionizing radiation; Lead shielding units for 50 mm and 100 mm thick walls |
| ISO 7213-1981 |
紙漿.試驗取樣 |
Pulps; Sampling for testing |
| ISO 7214-1998 |
泡沫塑料.聚乙烯.試驗方法 |
Cellular plastics - Polyethylene - Methods of test |
| ISO 7215-1995 |
鐵礦石.相對還原性的測定 |
Iron ores - Determination of relative reducibility |
| ISO 7216-1992 |
聲學.農林輪式拖拉機和自行式機械.行走噪聲的測量 |
Acoustics; agricultural and forestry wheeled tractors and self-propelled machines; measurement of noise emitted when in motion |
| ISO 7218 AMD 1-2001 |
食品和動物飼料微生物學.微生物檢驗的一般規則.修改件1 |
Microbiology of food and animal feeding stuffs - General rules for microbiological examinations; Amendment 1 |
| ISO 7218-1996 |
食品和動物飼料的微生物學.微生物檢驗的通則 |
Microbiology of food and animal feeding stuffs - General rules for microbiological examinations |
| ISO 722-1991 |
鑿巖設備.空心六角形鉆桿.棒材 |
Rock drilling equipment; hollow drill steels in bar form, hexagonal and round |
| ISO 7220 Technical Corrigendum 1-2001 |
信息和文獻.標準目錄的表示.技術勘誤1 |
Information and documentation - Presentation of catalogues of standards; Technical Corrigendum 1 |
| ISO 7220-1996 |
信息和文獻工作.標準的目錄表示 |
Information and documentation - Presentation of catalogues of standards |
| ISO 7221-1984 |
造船和海上建筑物.托架上的船載駁船,系列1.主要技術要求 |
Shipbuilding and marine structures; Shipborne barges, series 1, on barge carriers; Principal technical requirements |
| ISO 7222-1985 |
造船.船載駁船,系列2.主要尺寸 |
Shipbuilding; Shipborne barges, series 2; Main dimensions |
| ISO 7224-1983 |
葡萄栽培和葡萄酒釀制設備.搗碎泵.試驗方法 |
Equipment for vine cultivation and wine making; Mash pumps; Methods of test |
| ISO 7226-1988 |
六角形板牙的尺寸 |
Hexagonal dienuts |
| ISO 7227 AMD 1-2004 |
道路車輛.照明和光信號裝置.詞匯.修改件1 |
|
| ISO 7227-1987 |
道路車輛.照明燈和光信號裝置.詞匯.三種語言版 |
Road vehicles; Lighting and light signalling devices; Vocabulary Trilingual edition |
| ISO 7229-1997 |
橡膠或塑料涂覆織物.透氣性測量 |
Rubber- or plastics-coated fabrics - Measurement of gas permeability |
| ISO 723-1991 |
鑿巖設備.空心六角形鉆鋼的鍛造柄和卡緊套環 |
Rock drilling equipment; forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels |
| ISO 7231-1984 |
泡沫柔性聚合材料.恒定壓降下的氣流值估計法 |
Polymeric materials, cellular flexible; Method of assessment of air flow value at constant pressure-drop |
| ISO 7232-1986 |
橡膠或塑料鞋靴.抗靜電涼鞋和木底鞋 |
Rubber or plastics footwear; Antistatic sandals, sabots and clogs |
| ISO 7233-1991 |
橡膠和塑料軟管和軟管組件.吸引阻力測定 |
Rubber and plastics hoses and hose assemblies; determination of suction resistance |
| ISO 7235-1991 |
聲學.消音輸送道測量步驟.插入損耗、流動噪聲和壓力損失 |
Acoustics; measurement procedures for ducted silencers; insertion loss, flow noise and total pressure loss |
| ISO 7235-2003 |
聲學.管道消音器和空氣界面裝置的實驗室測量步驟.插入損失、流動噪聲和總壓損失 |
(Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss) |
| ISO 7235-2003 |
聲學.管道消音器和空氣界面裝置的實驗室測量步驟.插入損失、流動噪聲和總壓損失 |
|
| ISO 7236-1991 |
內河船.頂推式船用可拆換信號桿.安裝裝置 |
Inland navigation vessels; demountable signal masts for push-tows; mounting attachment |
| ISO 7237 AMD 1-2001 |
旅居車.質量和尺寸.詞匯.修改件1 |
Caravans - Masses and dimensions - Vocabulary; Amendment 1 |
| ISO 7237-1993 |
旅居車.質量和尺寸.詞匯 |
Caravans; masses and dimensions; vocabulary |
| ISO 7238-1983 |
黃油.乳清pH值的測定.電位滴定法 |
Butter; Determination of pH of the serum; Potentiometric method |
| ISO 7238-2004 |
奶油.乳清pH值的測定.電位滴定法 |
|
| ISO 724-1993 |
ISO一般用途米制螺紋.基本尺寸 |
ISO general-purpose metric screw threads; basic dimensions |
| ISO 7240-1-1988 |
火災探測和報警系統.第1部分:總論和定義 |
Fire detection and alarm systems; part 1: general and definitions |
| ISO 7240-15-2004 |
火災探測和報警系統.第15部分:多測頭火災探測器 |
|
| ISO 7240-2-2003 |
火災探測和報警系統.第2部分:控制和指示設備 |
(Fire detection and alarm systems - Part 2: Control and indicating equipment) |
| ISO 7240-2-2003 |
火災探測和報警系統.第2部分:控制和指示設備 |
|
| ISO 7240-4-2003 |
火災探測和報警系統.第4部分:供電設備 |
(Fire detection and alarm systems - Part 4: Power supply equipment) |
| ISO 7240-4-2003 |
火災探測和報警系統.第4部分:供電設備 |
|
| ISO 7240-5-2003 |
火災探測和報警系統.第5部分:點式熱探測器 |
|
| ISO 7240-6-2004 |
火災探測和報警系統.第6部分:用電化學電池的一氧化碳火災探測器 |
|
| ISO 7240-7-2003 |
火災探測和報警系統.第7部分:使用散射光、透射光或電離作用的尖形煙霧探測器 |
(Fire detection and alarm systems - Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization) |
| ISO 7240-7-2003 |
火災探測和報警系統.第7部分:使用散射光、透射光或電離作用的尖形煙霧探測器 |
|
| ISO 7241-1-1987 |
液壓傳動.速接聯軸節.第1部分:尺寸和要求 |
Hydraulic fluid power; Quick-action couplings; Part 1 : Dimensions and requirements |
| ISO 7241-2-2000 |
液壓傳動.速動連接件.第2部分:試驗方法 |
Hydraulic fluid power - Quick-action couplings - Part 2: Test methods |
| ISO 7243-1989 |
熱環境.根據濕球玻璃溫度計指示數對操作人員熱影響的估算 |
Hot environments; estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) |
| ISO 7244-1984 |
空氣配給和空氣擴散.風門和閥門的空氣動力試驗 |
Air distribution and air diffusion; Aerodynamic testing of dampers and valves |
| ISO 7245-1984 |
丙烯腈一丁二烯一苯乙烯共聚物(ABS)管和配件.模制和擠壓材料的一般規范 |
Pipes and fittings of acrylonitrile-butadiene- styrene (ABS); General specification for moulding and extrusion materials |
| ISO 7246-1984 |
丙烯腈/苯乙烯/丙烯酸酯(ASA)管和配件.模制和擠壓材料的一般規范 |
Pipes and fittings of acrylonitrile/styrene/ acrylester (ASA); General specification for moulding and extrusion materials |
| ISO 7250-1996 |
工藝設計相關的基本人體測量 |
Basic human body measurements for technological design |
| ISO 7251-1993 |
微生物學.預測大腸桿菌計數的一般導則.最大概率技術 |
Microbiology; general guidance for enumeration of presumptive Escherichia coli; most probable number technique |
| ISO 7252-1984 |
色漆和清漆.汞總含量的測定.無焰原子吸收光譜測定法 |
Paints and varnishes; Determination of total mercury; Flameless atomic absorption spectrometric method |
| ISO 7253-1996 |
涂料和清漆.耐中性鹽霧的測定 |
Paints and varnishes - Determination of resistance to neutral salt spray (fog) |
| ISO 7255-1985 |
造船.船舶運行控制機組.詞匯.三種語言版 |
Shipbuilding; Active control units of ships; Vocabulary Trilingual edition |
| ISO 7256-1-1984 |
播種設備.試驗方法.第1部分:單粒點播機(精密播種機) |
Sowing equipment; Test methods; Part 1; Single seed drills (precision drills) |
| ISO 7256-2-1984 |
播種設備.試驗方法.第2部分:條播機 |
Sowing equipment; Test methods; Part 2 : Seed drills for sowing in lines |
| ISO 7257-1983 |
飛機.液壓管道接頭和配件.旋轉的彎曲試驗 |
Aircraft; Hydraulic tubing joints and fittings; Rotary flexure test |
| ISO 7258-1984 |
航空航天設備的聚四氟乙烯(PTFE)管材.比重和相對比重的測定方法 |
Polytetrafluoroethylene (PTFE) tubing for aerospace applications; Methods for the determination of the density and relative density |
| ISO 7259-1988 |
地下用的按鈕操縱的鑄鐵閘閥 |
Predominantly key-operated cast iron gate valves for underground use |
| ISO 7263-1994 |
瓦楞紙.試驗起瓦楞后耐壓扁性的測定 |
Corrugating medium - Determination of the flat crush resistance after laboratory fluting |
| ISO 7266-1984 |
銅和銅合金.硫含量的測定.燃燒滴定法 |
Copper and copper alloys; Determination of sulfur content; Combustion titrimetric method |
| ISO 7266-1984 |
銅和銅合金.硫含量的測定.燃燒滴定法 |
Copper and copper alloys; Determination of sulfur content; Combustion titrimetric method |
| ISO 7267-1-1997 |
橡膠包覆的輥筒.表觀硬度的測定.第1部分:國際橡膠硬度標度(IRHD)法 |
Rubber-covered rollers - Determination of apparent hardness - Part 1: IRHD method |
| ISO 7267-2-1986 |
橡膠涂覆滾子.表觀硬度的測定.第2部分:肖氏(SHORE)硬度計法 |
Rubber-covered rollers; Determination of apparent hardness; Part 2 : Shore-type durometer method |
| ISO 7267-3-1988 |
橡膠涂覆滾子.表面硬度的測量.第3部分:普西-瓊斯(Ppusey and Jones)法 |
Rubber-covered rollers; determination of apparent hardness; part 3: Pusey and Jones method |
| ISO 7268 AMD 1-1984 |
第1次修改 |
Amendment 1-1984 |
| ISO 7268-1983 |
管件.公稱壓力的定義 |
Pipe components; Definition of nominal pressure |
| ISO 7268-1983 |
管件.公稱壓力的定義 |
Pipe components; Definition of nominal pressure |
| ISO 7269-1995 |
橡膠.游離硫離子的測定 |
Rubber - Determination of free sulfur |
| ISO 727-1-2002 |
壓力管件用由未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的帶普通管套的管配件.第1部分:米制系列 |
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1: Metric series |
| ISO 727-2-2002 |
壓力管件用由未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的帶普通管套的管配件.第2部分:英制系列 |
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based series |
| ISO 7270-1-2003 |
橡膠.熱解氣相色譜分析法.第1部分:聚合物(單聚合物和共混聚合物)的標識 |
(Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends) ) |
| ISO 7270-1-2003 |
橡膠.熱解氣相色譜分析法.第1部分:聚合物(單聚合物和共混聚合物)的標識 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com