標準號 |
中文名稱 |
英文名稱 |
| ISO 3715-1978 |
造船.船舶螺旋槳.等義術語表.三種語言版 |
(Shipbuilding; Ship screw propellers; List of equivalent terms Trilingual edition) |
| ISO 3715-2-2001 |
船舶和海上技術.推進器設備和船舶.第2部分:可變距推進器設備用詞匯 |
(Ships and marine technology - Propulsion plants and ships - Part 2: Vocabulary for controllable-pitch propeller plants) |
| ISO 3716-1977 |
明渠液體流量測量.懸浮水垢負荷取樣器的功能要求和特性 |
Liquid flow measurement in open channels; Functional requirements and characteristics of suspended sediment load samplers |
| ISO 3719-1994 |
機械振動.平衡試驗機及相關儀器用符號 |
(Mechanical vibrations - Symbols for balancing machines and associated instrumentation) |
| ISO 3720 Technical Corrigendum 1-1992 |
技術勘誤1 |
(Black tea; definition and basic requirements; technical corrigendum 1) |
| ISO 3720 Technical Corrigendum 2-2004 |
紅茶.定義和基本要求.技術勘誤2 |
|
| ISO 3720-1986 |
紅茶.定義和基本要求 |
(Black tea; Definition and basic requirements) |
| ISO 3722-1976 |
液壓傳動.液體樣品容器.合格和清潔控制方法 |
(Hydraulic fluid power; Fluid sample containers; Qualifying and controlling cleaning methods) |
| ISO 3723-1976 |
液壓傳動.濾芯件.端向負荷試驗方法 |
(Hydraulic fluid power; Filter elements; Method for end load test) |
| ISO 3724-1976 |
液壓傳動.濾芯件.流動疲勞特性的驗證 |
(Hydraulic fluid power; Filter elements; Verification of flow fatigue characteristics) |
| ISO 3726-1983 |
速溶咖啡.在70℃減壓情況下質量損失的測定 |
(Instant coffee; Determination of loss in mass at 70 degrees C under reduced pressure) |
| ISO 3727-1-2001 |
黃油.含水量、非脂肪固體含量和脂肪含量的測定.第1部分:含水量的測定(基準方法) |
(Butter - Determination of moisture, non-fat solids and fat contents - Part 1: Determination of moisture content (Reference method)) |
| ISO 3727-2-2001 |
黃油.含水量、非脂肪固體含量和脂肪含量的測定.第2部分:非脂肪固體含量的測定(基準方法) |
(Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method)) |
| ISO 3727-3-2003 |
黃油.含水量、非脂肪固體含量和脂肪含量的測定.第3部分:脂肪含量的計算 |
(Butter - Determination of moisture, not-fat solids and fat contents - Part 3: Calculation of fat content) |
| ISO 3727-3-2003 |
黃油.含水量、非脂肪固體含量和脂肪含量的測定.第3部分:脂肪含量的計算 |
|
| ISO 3728-1977 |
冰淇淋和冰乳.固體總含量的測定(參比法) |
(Ice cream and milk ice; Determination of total solids content (Reference method)) |
| ISO 3728-2004 |
冰淇淋和牛乳凍.總固形物含量的測定(參照法) |
|
| ISO 3729-1976 |
建筑用纖維板.表面穩定性的測定 |
(Fibre building boards; Determination of surface stability) |
| ISO 3730-1989 |
造船.錨泊絞盤 |
(Shipbuilding; mooring winches) |
| ISO 3731-2003 |
道路車輛.牽引車和掛車之間電氣連接用連接器.帶24V標稱電源電壓的車輛用24S(補充)型7極連接器 |
(Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage ) |
| ISO 3731-2003 |
道路車輛.牽引車和掛車之間電氣連接用連接器.帶24V標稱電源電壓的車輛用24S(補充)型7極連接器 |
|
| ISO 3732-2003 |
道路車輛.牽引車和掛車之間電氣連接用連接器.帶12V標稱電源電壓的車輛用12S(補充)型7極連接器 |
(Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage ) |
| ISO 3732-2003 |
道路車輛.牽引車和掛車之間電氣連接用連接器.帶12V標稱電源電壓的車輛用12S(補充)型7極連接器 |
|
| ISO 3733-1999 |
石油產品和瀝青材料.水含量的測定.蒸餾法 |
(Petroleum products and bituminous materials - Determination of water - Distillation method) |
| ISO 3734-1997 |
石油產品.殘余燃料油中水和沉積物含量的測定.離心法 |
(Petroleum products - Determination of water and sediment in residual fuel oils - Centrifuge method) |
| ISO 3735-1999 |
原油和燃料油.沉積物的測定.萃取法 |
(Crude petroleum and fuel oils - Determination of sediment - Extraction method) |
| ISO 3738-1-1982 |
硬質合金.洛氏硬度試驗(A標).第1部分:試驗方法 |
(Hardmetals; Rockwell hardness test (scale A); Part 1 : Test method) |
| ISO 3738-2-1988 |
硬質合金.洛氏硬度試驗(A標尺).第2部分:標準試塊的制備及檢定 |
(Hardmetals; Rockwell hardness test (scale A); part 2: preparation and calibration of standard test blocks) |
| ISO 3739-1-1992 |
工業用輪胎和輪輞.第1部分:5錐度或平底輪輞的可充氣輪胎(米制系列).名稱、尺寸和標志 |
(Industrial tyres and rims; part 1: pneumatic tyres (metric series) on 5 tapered or flat base rims; designation, dimensions and marking) |
| ISO 3739-2-1992 |
工業用輪胎和輪輞.第2部分:5錐度或平底輪輞的可充氣輪胎(米制系列).額定負荷 |
(Industrial tyres and rims; part 2: pneumatic tyres (metric series) on 5 tapered or flat base rims; load ratings) |
| ISO 3739-3-1995 |
工業用輪胎和輪輞.第3部分:輪輞 |
(Industrial tyres and rims - Part 3: Rims) |
| ISO 3740-2000 |
聲學.噪聲源音響功率級的測定.基本標準使用指南 |
(Acoustics - Determination of sound power levels of noise sources - Guidelines for the use basic standards) |
| ISO 3741 Technical Corrigendum 1-2001 |
聲學.用聲壓測定噪聲源的聲級.混響室精確法.技術勘誤1 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms; Technical Corrigendum 1) |
| ISO 3741-1999 |
聲學.用聲壓測定噪聲源聲音功率級.回響室內用精密方法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms) |
| ISO 3743-1-1994 |
聲學.噪聲源聲功率級的測定.在混響聲場中小聲源和移動聲源的工程測量方法.第1部分:硬墻試驗室的比較分析法 |
(Acoustics; determination of sound power levels of noise sources; engineering methods for small, movable sources in reverberant fields; part 1: comparison method in hard-walled test rooms) |
| ISO 3743-2-1994 |
聲學.利用聲壓對噪聲源混響場噪聲源聲功率級的測定.在混響場中對小聲源,可移動聲源的工程測量方法.第2部分: |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms) |
| ISO 3744-1994 |
聲學.噪聲源音響功率級的測定.反射平面上基本自由聲場中的工程法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane) |
| ISO 3745-1977 |
聲學.噪聲源音響功率級的測定.無回音室和半回音室的精確測定法 |
(Acoustics; Determination of sound power levels of noise sources; Precision methods for anechoic and semi-anechoic rooms) |
| ISO 3745-2003 |
聲學.用聲壓法測定噪聲源聲功率級.消聲室和半消聲室精密法 |
|
| ISO 3746 Technical Corrigendum 1-1995 |
聲學.利用聲壓對噪聲源聲音功率級的測定.利用包封測量面超過反射平面的測量法.技術勘誤表1 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane; Technical Corrigendum 1) |
| ISO 3746-1995 |
聲學.噪聲源音響功率級的測定.在反射平面上利用包封測量表面的測量法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane) |
| ISO 3747-2000 |
聲學.用聲壓測定噪聲源聲音功率級.現場比對法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ) |
| ISO 3750-1976 |
鋅合金.鎂含量的測定.原子吸收法 |
(Zinc alloys; Determination of magnesium content; Atomic absorption method) |
| ISO 3751-1976 |
鋅錠.化學分析用樣品的選擇和制備 |
(Zinc ingots; Selection and preparation of samples for chemical analysis) |
| ISO 3752-1976 |
鋅合金錠.化學分析用樣品的選擇和制備 |
(Zinc alloy ingots; Selection and preparation of samples for chemical analysis) |
| ISO 3753-1977 |
真空技術.圖形符號 |
(Vacuum technology; Graphical symbols) |
| ISO 3754-1976 |
鋼.火焰或感應加熱淬硬有效深度的測定 |
(Steel; Determination of effective depth of hardening after flame or induction hardening) |
| ISO 3755-1991 |
一般工程用鑄鋼 |
(Cast carbon steels for general engineering purposes) |
| ISO 3756-1976 |
山蒼子油 |
(Oil of cubeb) |
| ISO 3757-2002 |
廣藿香油 |
(Oil of patchouli (Pogostemon cablin (Blanco) Benth.)) |
| ISO 3758-1991 |
紡織品.使用符號的保養標簽規則 |
(Textiles; care labelling code using symbols) |
| ISO 3759 Technical Corrigendum 2-2004 |
紡織品.測定尺寸變化試驗用服裝和織物樣品的制備、標記和測量.技術勘誤2 |
|
| ISO 3759-1994 |
紡織品.測定尺寸變化試驗用織物樣品和服裝的制備標記和測量 |
(Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change) |
| ISO 376-1999 |
金屬材料.單軸向試驗機驗證用作用力檢驗儀的校準 |
(Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines) |
| ISO 376-2004 |
金屬材料.單軸向試驗機驗證用作用力檢驗儀的校準 |
|
| ISO 3760-2002 |
芹菜子油 |
(Oil of celery seed (Apium graveolens L.)) |
| ISO 3761-1997 |
巴西玫瑰木油 |
(Oil of rosewood, Brazilian type [Aniba rosaeodora Ducke var. amazonica Ducke or Aniba parviflora (Meissner) Mez]) |
| ISO 3763-1976 |
鍛鋼.非金屬夾雜物含量宏觀評定方法 |
(Wrought steels; Macroscopic methods for assessing the content of non-metallic inclusions) |
| ISO 3764-2000 |
計時儀表.運動.類型、尺寸和名稱 |
(Timekeeping instruments - Movements - Types, dimensions and nomenclature) |
| ISO 3765-1998 |
計時儀表.手表.表帶與表殼相固定構件的尺寸 |
(Timekeeping instruments - Wristwatches - Dimensions of bracelet-to-case fastening elements) |
| ISO 3766-1995 |
建筑和土木工程制圖.鋼筋混凝土的加筋表示法 |
(Construction drawings - Simplified representation of concrete reinforcement) |
| ISO 3766-2003 |
建筑工程制圖.混凝土加筋的簡化畫法 |
|
| ISO 3767-1-1998 |
牽引車、農業林業機械、除草機和園藝設備. 操作者控制符號和其它顯示符號.第1部分:一般符號 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 1: Common symbols) |
| ISO 3767-2 AMD 1-1995 |
拖拉機,農業和林業機械,動力除草機和園圃設備.操縱者的控制裝置和其它顯示器的符號.第1部分:通用符號.第1次 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 2: Symbols for agricultural tractors and machinery; Amendment 1) |
| ISO 3767-2 AMD 2-1998 |
拖拉機、農業林業機械、電動剪草機和園藝設備.操縱者和其它顯示裝置的符號.第2部分:農業拖拉機和機械的符號 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 2: Symbols for agricultural tractors and machinery; Amendment 2: Additional symbols) |
| ISO 3767-2 AMD 3-2000 |
拖拉機、農業林業機械、電動剪草機和園藝設備.操縱者控制裝置和其它顯示裝置的符號.第2部分:農業拖拉機和機 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 2: Symbols for agricultural tractors and machinery; Amendment 3) |
| ISO 3767-2-1991 |
拖拉機、農業林業機械、電動剪草機和園藝設備.操縱者控制裝置和其它顯示裝置的符號.第2部分:農業拖拉機和機 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment; symbols for operator controls and other displays; part 2: symbols for agricultural tractors and machinery) |
| ISO 3767-3-1995 |
拖拉機.農業和林業機械,動力刈草機和園圃設備.操作控制和其它顯示符號.第3部分:動力刈草機和園圃設備符號 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 3: Symbols for powered lawn and garden equipment) |
| ISO 3767-4 AMD 1-2000 |
牽引車、農業林業機械、電動剪草機和園藝設備.操縱者控制和其它顯字裝置的符號.第4部分:林業機械的符號.修 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 4: Symbols for forestry machinery; Amendment 1: Additional symbols) |
| ISO 3767-4-1993 |
牽引車、農業林業機械、電動剪草機和園藝設備.操縱者控制和其它顯字裝置的符號.第4部分:林業機械的符號 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment; symbols for operator controls and other displays; part 4: symbols for forestry machinery) |
| ISO 3767-5 AMD 1-2001 |
牽引車、農業林業機械、電動剪草機和園藝設備.操縱者控制和其它顯字裝置的符號.第5部分:人工便攜式林業機械 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 5: Symbols for manual portable forestry machinery; Amendment 1: Revised and additional symbols) |
| ISO 3767-5-1992 |
拖拉機,農業和林業機械.動力除草機和園藝設備.操縱者控制裝置和其它顯示器的符號.第5部分:手動便攜式林業機 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment; symbols for operator controls and other displays; part 5: symbols for manual portable forestry machinery) |
| ISO 377 Technical Corrigendum 1-1997 |
鋼和鋼產品.機械性能試驗用的樣品和試樣的選擇與制備.技術勘誤表1 |
(Steel and steel products - Location and preparation of samples and test pieces for mechanical testing; Technical Corrigendum 1) |
| ISO 377-1997 |
鋼和鋼制品.機械試驗用樣品和試件的制備與安裝 |
(Steel and steel products - Location and preparation of samples and test pieces for mechanical testing) |
| ISO 3771-1994 |
石油產品.堿總值的測定.高氯酸電位滴定法 |
(Petroleum products - Determination of base number - Perchloric acid potentiometric titration method) |
| ISO 3772-2000 |
攝影.預壓工業用感光材料的膠卷.尺寸和有關要求 |
(Photography - Rolls of sensitized material for the pre-press industry - Dimensions and related requirements) |
| ISO 3773-1983 |
電影技術.供電影放映機的8mm S型電影膠片的粘接片.尺寸 |
(Cinematography; Tape splices for 8 mm Type S motion-picture film for projector use; Dimensions) |
| ISO 3774-1988 |
電影技術.穿孔的8mmS(1-3-5-7-0)和(1-0)型的35mm電影膠片.剪切和穿孔尺寸 |
(Cinematography; 35 mm motion-picture film perforated 8 mm type S (1-3-5-7-0) and (1-0); cutting and perforating dimensions) |
| ISO 3775-1990 |
電影技術.在穿孔的8mm S(1-3)型的16mm電影膠片上的8mm,S型拷貝影象區.位置和尺寸 |
(Cinematography; printed 8 mm type S image area on 16 mm motion-picture film perforated 8 mm type S (1-3); position and dimensions) |
| ISO 3776-1989 |
農用拖拉機.安全帶固定裝置 |
(Tractors for agriculture - Seat belt anchorages) |
| ISO 3779-1983 |
道路車輛.車輛識別號碼(VIN).內含和構成 |
(Road vehicles; Vehicle identification number (VIN); Content and structure) |
| ISO 378-1980 |
體育器械.雙杠 |
(Gymnastic equipment; Parallel bars) |
| ISO 3780-1983 |
道路車輛.各國制造廠家標志符號(WMI)代碼 |
(Road vehicles; World manufacturer identifier (WMI) code) |
| ISO 3781-1983 |
紙和紙板.浸水后抗張強度的測定 |
(Paper and board; Determination of tensile strength after immersion in water) |
| ISO 3783-1980 |
紙和紙板.耐拉毛性的測定.用IGT 試驗機加速法(電動式) |
(Paper and board; Determination of resistance to picking; Accelerating speed method using the IGT tester (Electric model)) |
| ISO 3784-1976 |
道路車輛.碰撞試驗中沖擊速度的測量 |
(Road vehicles; Measurement of impact velocity in collision tests) |
| ISO 3785-1976 |
鋼.試件軸線的規定 |
(Steel; Designation of test piece axes) |
| ISO 3786-1975 |
造船.內河航行牽引鉤.牽引力的標度 |
(Shipbuilding; Inland navigation towing hooks; Scale of tractive efforts) |
| ISO 379-1980 |
體育器械.單杠 |
(Gymnastic equipment; Horizontal bar) |
| ISO 3790-1976 |
網漁具.網衣線伸長的測定 |
(Fishing nets; Determination of elongation of netting yarns) |
| ISO 3791-1976 |
辦公用計算機和數據處理設備.數字應用的鍵盤布局 |
(Office machines and data processing equipment; Keyboard layouts for numeric applications) |
| ISO 3792-1976 |
加法器.功能鍵盤的布局 |
(Adding machines; Layout of function keyboard) |
| ISO 3793-1976 |
香精油.在吡啶中乙�；ü蓝ㄓ坞x伯醇和游離仲醇含量 |
(Essential oils; Estimation of primary and secondary free alcohols content by acetylation in pyridine) |
| ISO 3794-1976 |
香精油(包括叔醇).用乙�；鬁y定酯化值法估定游離醇含量 |
(Essential oils (containing tertiary alcohols); Estimation of free alcohols content by determination of ester value after acetylation) |
| ISO 3795-1989 |
農業和林業用道路車輛、拖拉機和機具.內部裝飾材料燃燒性能的測定 |
(Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials) |
| ISO 3796-1999 |
船和造船技術.外開單扇門凈開口 |
(Ships and marine technology - Clear openings for external single-leaf doors) |
| ISO 3797-1976 |
造船.直立式鋼梯 |
(Shipbuilding; Vertical steel ladders) |
| ISO 3800-1993 |
螺紋緊固件.軸向負荷疲勞試驗.試驗方法和結果的評定 |
(Threaded fasteners; axial load fatigue testing; test methods and evaluation of results) |
| ISO 3801-1977 |
紡織品.機織物.單位長度重量和單位面積重量的測定 |
(Textiles; Woven fabrics; Determination of mass per unit length and mass per unit area) |
| ISO 3802-1976 |
信息處理.可互換儀表設備應用的有8mm(5/16in)中心孔的一般用途磁帶盤 |
(Information processing; General purpose reels with 8 mm (5/16 in) centre hole for magnetic tape for interchange instrumentation applications) |
| ISO 3803-1984 |
道路車輛.制動設備的液壓試驗連接 |
(Road vehicles; Hydraulic pressure test connection for braking equipment) |
| ISO 3807-1-2000 |
乙炔儲瓶.基本要求.第1部分:無可熔插頭的瓶 |
(Cylinders for acetylene - Basic requirements - Part 1: Cylinders without fusible plugs) |
| ISO 3807-2-2000 |
乙炔儲瓶.基本要求.第2部分:帶有可熔插頭的瓶 |
(Cylinders for acetylene - Basic requirements - Part 2: Cylinders with fusible plugs) |
| ISO 3808-2002 |
道路車輛.無屏蔽高電壓點火電纜.總規范、試驗方法和要求 |
(Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements) |
| ISO 3809-1987 |
用機械法制取的墨西哥酸橙油(Citrus aurantiifolia(Christmann)Swingle) |
(Oil of lime, Mexico (Citrus aurantiifolia (Christmann) Swingle) obtained by mechanical means) |
| ISO 3809-2004 |
用機械法獲得的墨西哥酸橙油 |
|
| ISO 3810-1987 |
膠凝軟木制地板磚.試驗方法 |
(Floor tiles of agglomerated cork; Methods of test) |
| ISO 3813-1987 |
膠凝軟木制地板磚.特性、取樣和包裝 |
(Floor tiles of agglomerated cork; Characteristics, sampling and packing) |
| ISO 3813-2004 |
彈性地板覆蓋物.軟木地板磚.規范 |
|
| ISO 3815-1976 |
鋅和鋅合金.光譜分析 |
(Zinc and zinc alloys; Spectrographic analysis) |
| ISO 3816-1976 |
鋅錠.光譜分析用樣品的選擇和制備 |
(Zinc ingots; Selection and preparation of samples for spectrographic analysis) |
| ISO 3817-1976 |
鋅合金錠.光譜分析用樣品的選擇和制備 |
(Zinc alloy ingots; Selection and preparation of samples for spectrographic analysis) |
| ISO 3819-1985 |
實驗室玻璃器皿.燒杯 |
(Laboratory glassware; Beakers) |
| ISO 3820-1978 |
電影技術.8mmS型電影膠片的帶齒卷盤.尺寸和設計 |
(Cinematography; Sprockets for 8 mm Type S motion-picture film; Dimensions and design) |
| ISO 3821-1998 |
氣焊設備.焊接、切割和同類工藝用橡膠軟管 |
(Gas welding equipment - Rubber hoses for welding, cutting and allied processes) |
| ISO 3822-1-1999 |
聲學.用于供水設施的裝置和設備發出的噪音的實驗室試驗.第1部分:測量方法 |
(Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement) |
| ISO 3822-2-1995 |
聲學.由供水設施和設備發出噪音的實驗室試驗.第2部分:放水龍頭的安裝和工作條件 |
(Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves) |
| ISO 3822-3-1997 |
聲學.由供水設施和設備發出噪音的實驗室試驗.第3部分:管路閥門和附件的安裝和工作條作 |
(Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances) |
| ISO 3822-4-1997 |
聲學.由供水設施和設備發出的噪音的實驗室試驗.第4部分:專用裝置的安裝和工作條件 |
(Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances) |
| ISO 3823-1-1997 |
牙科用旋轉器械.牙鉆.第1部分:鋼制牙鉆和硬質合金牙鉆 |
(Dental rotary instruments - Burs - Part 1: Steel and carbide burs) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com