標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 13431-1999 |
土工織物與土工織物相關產品.拉伸蠕變與蠕變斷裂性能測定 |
(Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999); German version EN ISO 13431:1999) |
| DIN EN ISO 13437-1998 |
土工織物及其相關制品.土壤中試樣的安裝和提取的方法以及實驗室中測量試樣的檢驗方法 |
(Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory (ISO 13437:1998); German version EN ISO 13437:1998) |
| DIN EN ISO 13438-2005 |
土工織物和土工織物相關產品.測定耐氧化性的篩選試驗方法 |
|
| DIN EN ISO 1346-2005 |
纖維繩索.聚丙烯裂膜、單絲和多絲(PP2)及聚丙烯高彈性多絲(PP3)繩索.3、4和8股繩索 |
|
| DIN EN ISO 13468-1-1997 |
塑料.透明材料光透射率總量的測定.第1部分:單束照射儀 |
(Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996); German version EN ISO 13468-1:1996) |
| DIN EN ISO 13473-1-2004 |
利用表面外觀表征路面結構.第1部分:平均剖面高度的測定 |
|
| DIN EN ISO 13478-1997 |
流體傳輸用熱塑管.抗快速裂紋擴展性(RCP)的測定.實物試驗 |
(Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:1997); German version EN ISO 13478:1997) |
| DIN EN ISO 13479-1997 |
流體傳輸用聚烯烴管.抗破裂擴展性的測定.有凹口的管上裂紋緩慢增長的試驗方法(切口試驗) |
(Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test) (ISO 13479:1997); German version EN ISO 13479:1997) |
| DIN EN ISO 13485-2001 |
質量體系.醫療裝置.ENISO9001應用的特殊要求 |
(Quality systems - Medical devices - Particular requirements for the application of EN ISO 9001 (Revision of EN 46001:1996) (Identical to ISO 13485:1996); German version EN ISO 13485:2000) |
| DIN EN ISO 13488-2001 |
質量體系.醫療裝置.ENISO9002應用的特殊要求 |
(Quality systems - Medical devices - Particular requirements for the application of EN ISO 9002 (Revision of EN 46002:1996) (Identical to ISO 13488:1996); German version EN ISO 13488:2000) |
| DIN EN ISO 13500-1998 |
石油和天然氣工業.鉆孔清洗.規范和試驗 |
(Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:1998); German version EN ISO 13500:1998) |
| DIN EN ISO 13533-2002 |
石油和天然氣工業.鉆井和生產設備.鉆井設備 |
(Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001); German version EN ISO 13533:2001 (Text in German and English)) |
| DIN EN ISO 13534-2001 |
石油和天然氣工業.鉆探和生產設備.提升設備的檢驗、維護、修理和再制造 |
(Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000); German version EN ISO 13534:2000) |
| DIN EN ISO 13535-2002 |
汽油和天然氣工業.鉆井和生產設備.起重機設備 |
(Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000); German version EN ISO 13535:2000 (German and English texts)) |
| DIN EN ISO 13565-1-1998 |
幾何制品規范.紡織表面:輪廓法.表面分層功能特性.第1部分:篩選和一般測量條件 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version EN ISO 13565-1:1997) |
| DIN EN ISO 13565-2-1998 |
幾何制品規范.紡織表面:輪廓法.表面分層功能特性.第2部分:利用線材比例曲線表記述高特性 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996); German version EN ISO 13565-2:1997) |
| DIN EN ISO 13565-3-2000 |
幾何產品規范(GPS).表面特征:輪廓法.分層表面的功能特性.第3部分:利用材料的概率曲線描述高度特性 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998); German version EN ISO 13565-3:2000) |
| DIN EN ISO 13567-1-2002 |
技術產品文件.計算機輔助設計(CAD)用層的編排和命名.第1部分:綜述和原則 |
(Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:1998); German version EN ISO 13567-1:2002) |
| DIN EN ISO 13567-2-2002 |
技術產品文件.計算機輔助設計(CAD)圖層的編排和命名.第2部分:用于建筑工程文件的概念、格式和代碼 |
(Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:1998); German version EN ISO 13567-2:2002) |
| DIN EN ISO 13590-2004 |
小艇.個人船舶.建造和系統安裝要求 |
|
| DIN EN ISO 13625-2005 |
石油和天然氣工業.鉆井和生產設備.海洋鉆井隔水導管聯接器 |
|
| DIN EN ISO 13625-2005 |
石油和天然氣工業.鉆井和生產設備.海洋鉆井隔水導管聯接器 |
|
| DIN EN ISO 13628-1-1999 |
石油和天然氣工業.水下生產系統的設計和操作.第1部分:一般要求和推薦規范 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:1999); German version EN ISO 13628-1:1999) |
| DIN EN ISO 13628-2-2002 |
石油和天然氣工業.水下生產系統的設計和操作.第2部分:水下和船用軟管系統 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications (ISO 13628-2:2000); German version EN ISO 13628-2:2000 (German and english text)) |
| DIN EN ISO 13628-3-2003 |
石油和天然氣工業.水下采油系統的設計和操作.第3部分:通流線系統 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000); German and English version EN ISO 13628-3:2000) |
| DIN EN ISO 13628-4-1999 |
石油和天然氣工業.水下生產系統的設計和操作.第4部分:水下井口和主干設備 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:1999); German version EN ISO 13628-4:1999) |
| DIN EN ISO 13631-2003 |
石油和天然氣工業.封裝的往復式氣體壓縮機 |
(Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002); German and English version EN ISO 13631:2002) |
| DIN EN ISO 13666-1998 |
眼科光學.眼鏡鏡片.詞匯 |
(Ophthalmic optics - Spectacle lenses - Vocabulary (ISO 13666:1998); German version EN ISO 13666:1998) |
| DIN EN ISO 13680-2002 |
石油和天然氣工業.用作套管、鋪設管道和連接器材的耐腐蝕合金無縫管.技術交貨條件 |
(Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000); German version EN ISO 13680:2001) |
| DIN EN ISO 13691-2003 |
石油和天然氣工業.高速專用齒輪機構 |
(Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001); German and English version EN ISO 13691:2002) |
| DIN EN ISO 13694-2000 |
光學和光學設備.激光和激光相關設備.激光束能量密度分布的試驗方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000); German version EN ISO 13694:2000) |
| DIN EN ISO 13695-2004 |
光學和光子學.激光及其相關設備.激光光譜特性的試驗方法 |
|
| DIN EN ISO 13696-2002 |
光學和光學儀器.光學件輻射散射的試驗方法 |
(Optics and optical instruments - Test methods for radiation scattered by optical components (ISO 13696:2002); German version EN ISO 13696:2002) |
| DIN EN ISO 13702-2000 |
石油和天然氣工業.近海生產設備著火和爆炸的控制和平息.要求和導則 |
(Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999); German version EN ISO 13702:1999) |
| DIN EN ISO 13703-2003 |
石油和天然氣工業.海上作業平臺管道系統的設計和安裝 |
(Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000 + Cor. 1:2002); German and English version EN ISO 13703:2000 + AC:2002) |
| DIN EN ISO 13706-2000 |
石油和天然氣工業.風冷熱交換器 |
(Petroleum and natural gas industries - Air-cooled heat exchangers (ISO 13706:2000); German version EN ISO 13706:2000) |
| DIN EN ISO 13709-2005 |
石油、石油化工和天然氣工業用離心泵 |
|
| DIN EN ISO 13709-2005 |
石油、石油化工和天然氣工業用離心泵 |
|
| DIN EN ISO 13710-2005 |
石油、石油化學和天然氣工業.往復式變?nèi)菡婵毡?/td>
| |
| DIN EN ISO 13710-2005 |
石油、石油化學和天然氣工業.往復式變?nèi)菡婵毡?/td>
| |
| DIN EN ISO 13716-2000 |
牙科學.可逆和不可逆水解膠體印模材料系統 |
(Dentistry - Reversible-irreversible hydrocolloid impression material systems (ISO 13716:1999); German version EN ISO 13716:2000) |
| DIN EN ISO 13731-2002 |
熱環境的人類工效學.詞匯和符號 |
(Ergonomics of the thermal environment - Vocabulary and symbols (ISO 13731:2001); German version EN ISO 13731:2001) |
| DIN EN ISO 13734-2000 |
天然氣.用做增味劑的有機硫化物.要求和試驗方法 |
(Natural gas - Organic sulfur compounds used as odorants - Requirements and test method (ISO 13734:1998); German version EN ISO 13734:2000) |
| DIN EN ISO 13736-2000 |
石油產品和其他液態.閃點的測定.阿貝耳閉杯法 |
(Petroleum products and other liquids - Determination of flashpoint - Abel closed cup method (ISO 13736:1997); German version EN ISO 13736:1997) |
| DIN EN ISO 13753-1998 |
機械振動和沖擊.手-臂振動.測量手-臂裝置負載下彈性材料振動傳遞的方法 |
(Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998); German version EN ISO 13753:1998) |
| DIN EN ISO 13757-1998 |
液化石油氣.油殘余物的測定.高溫法 |
(Liquefied petroleum gases - Determination of oily residues - High-temperature method (ISO 13757:1996); German version EN ISO 13757:1996) |
| DIN EN ISO 13758-1997 |
液化石油氣.丙烷干燥度檢驗.閥門凍結法 |
(Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996); German version EN ISO 13758:1996) |
| DIN EN ISO 13759-1997 |
石油產品.柴油燃料中硝酸烷基酯的測定.光譜法 |
(Petroleum Products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996); German version EN ISO 13759:1996) |
| DIN EN ISO 13760-1998 |
壓力下液體輸送用塑料管.Miner法則.累積損傷的計算方法 |
(Plastics pipes for the conveyance of fluids under pressure - Miner`s rule - Calculation method for cumulative damage (ISO 13760:1998); German version EN ISO 13760:1998) |
| DIN EN ISO 13783-1998 |
塑料管體系.未增塑聚氯乙烯(PVC-U)抗拉雙插套管連接件.彎曲和內壁壓力下密封性和機械強度的檢驗方法 |
(Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997); German version EN ISO 13783:1997) |
| DIN EN ISO 13786-1999 |
建筑物件的熱性能.動態熱特性.計算方法 |
(Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:1999); German version EN ISO 13786:1999) |
| DIN EN ISO 13787-2003 |
建筑設備和工業裝置用熱絕緣產品.聲明的導熱系數的測定 |
(Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003); German version EN ISO 13787:2003) |
| DIN EN ISO 13788-2001 |
建筑物組件和件的濕熱性能.避免嚴重的表面潮濕和冷凝的內表面溫度.計算方法 |
(Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2001); German version EN ISO 13788:2001) |
| DIN EN ISO 13789-1999 |
建筑物熱性質.傳輸熱損耗率.計算方法 |
(Thermal performance of buildings - Transmission heat loss coefficient - Calculation method (ISO 13789:1999); German version EN ISO 13789:1999) |
| DIN EN ISO 13790-2004 |
建筑物的熱性能.房間取暖用能量的計算 |
|
| DIN EN ISO 13791-2005 |
建筑物的熱性能.夏季無機械通風冷卻時房間內部溫度的計算.通用標準和確認程序 |
|
| DIN EN ISO 13792-2005 |
建筑物的熱性能.無機器制冷條件下夏季房間內溫度的計算.簡化法 |
|
| DIN EN ISO 13792-2005 |
建筑物的熱性能.無機器制冷條件下夏季房間內溫度的計算.簡化法 |
|
| DIN EN ISO 13792-2005 |
建筑物的熱性能.無機器制冷條件下夏季房間內溫度的計算.簡化法 |
|
| DIN EN ISO 13793-2001 |
建筑物的熱性能.避免霜凍的地基的熱設計 |
(Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793:2001); German version EN ISO 13793:2001) |
| DIN EN ISO 13803-2004 |
色漆和清漆.20?漆膜反射光澤度的測定 |
|
| DIN EN ISO 13819-1-1997 |
石油和天然氣工業.近海結構設計.第1部分:一般要求 |
(Petroleum and natural gas industries - Offshore structures - Part 1: General requirements (ISO 13819-1:1995); German version EN ISO 13819-1:1997) |
| DIN EN ISO 13844-2000 |
塑料管道系統.用PVC-U管道的未增塑聚氯乙烯(PVC-U)彈性密封圈型套管接頭.負壓力下滲漏緊密度的試驗方法 |
(Plastics piping systems - Elastomeric sealing ring type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000); German version EN ISO 13844:2000) |
| DIN EN ISO 13845-2000 |
塑料管道系統.用PVC-U管道的未增塑聚氯乙烯(PVC-U)彈性密封圈型套管接頭.在內壓力下和角度偏離下滲漏緊密度 |
(Plastics pipes systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000); German version EN ISO |
| DIN EN ISO 13846-2001 |
塑料管道系統.熱塑壓力管用端部荷載軸承和無端部荷載軸承組件和連接件.在水內壓下測定長期密封性的試驗方法 |
(Plastic piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000); German version EN ISO 13846:2000) |
| DIN EN ISO 13884-2005 |
動物和植物脂肪和油.用紅外光譜測定法測定孤立的反式異構體 |
|
| DIN EN ISO 13897-2004 |
牙科學.汞齊合金膠囊 |
|
| DIN EN ISO 13900-2002 |
鋼.硼含量測定.蒸餾后姜黃素光譜測定法 |
(Steel - Determination of boron content - Curcumin spectrophotometric method after distillation (ISO 13900:1997); ; German version EN 13900:2002) |
| DIN EN ISO 13916-1996 |
焊接.預熱溫度,層間溫度和預加熱的維持溫度測量的導則 |
(Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996); German version EN ISO 13916:1996) |
| DIN EN ISO 13918-1998 |
焊接.電弧螺栓焊接用螺栓和陶瓷套圈 |
(Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:1998); German version EN ISO 13918:1998) |
| DIN EN ISO 13919-1-1996 |
焊接.電子和激光射線焊接接頭.不均勻性評定組別的指南.第1部分:鋼 |
(Welding - Electrons and laser beam welded joints; guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996); German version EN ISO 13919-1:1996) |
| DIN EN ISO 13919-2-2001 |
焊接.電子和激光束焊接接頭.缺陷的質量級別導則.第1部分:鋁及其可焊合金 |
(Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001); German version EN ISO 13919-2:2001) |
| DIN EN ISO 13920-1996 |
焊接.焊接結構的通用公差.長度和角度尺寸.形狀和位置 |
(Welding - General tolerances for welded constructions - Dimensions for lengths and angles; shape and position (ISO 13920:1996); German version EN ISO 13920:1996) |
| DIN EN ISO 13927-2003 |
塑料.用錐形輻射加熱器和熱電堆探測器進行簡單熱釋放試驗 |
(Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2001); German version EN ISO 13927:2003) |
| DIN EN ISO 13929-2001 |
小型船舶.操舵裝置.齒輪鏈接系統 |
(Small craft - Steering gear - Geared link systems (ISO 13929:2001); German version EN ISO 13929:2001) |
| DIN EN ISO 13934-1-1999 |
織物.織物表面結構拉伸特性.第1部分:用條形拉伸法測定最大拉伸力和最大拉伸力擴展 |
(Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:1999); German version EN ISO 13934-1:1999) |
| DIN EN ISO 13934-2-1999 |
織物.織物表面結構拉伸特性.第2部分:用織物抓樣強力試驗測定最大拉伸力 |
(Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:1999); German version EN ISO 13934-2:1999) |
| DIN EN ISO 13935-1-1999 |
織物.織物表面結構和成衣結構中接縫的拉伸試驗.第1部分:用條狀拉伸試驗測定接縫的最大拉伸力 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:1999); German version EN ISO 13935-1:1999) |
| DIN EN ISO 13935-2-1999 |
織物.織物表面結構和成衣結構中接縫的拉伸試驗.第2部分:用織物抓樣強力試驗測定接縫的最大拉伸力 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:1999); German version EN ISO 13935-2:1999) |
| DIN EN ISO 13936-1-2004 |
紡織品.機織物縫合處紗線抗脫性測定.第1部分:固定接縫開口法 |
|
| DIN EN ISO 13936-2-2004 |
紡織品.機織物縫合處紗線抗脫性測定.第2部分:固定負載法 |
|
| DIN EN ISO 13937-1-2000 |
紡織品.紡織物的撕裂特性.第1部分:用彈道擺錘法對撕裂力量的測定 |
(Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) (ISO 13937-1:2000); German version EN ISO 13937-1:2000) |
| DIN EN ISO 13937-2-2000 |
紡織品.紡織物的撕裂特性.第2部分:褲型試驗樣品撕裂力量的測定 |
(Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (single tear method) (ISO 13937-2:2000); German version EN ISO 13937-2:2000) |
| DIN EN ISO 13937-3-2000 |
紡織品.紡織物的撕裂特性.第3部分:翅型試驗樣品撕裂力量的測定 |
(Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) (ISO 13937-3:2000); German version EN ISO 13937-3:2000) |
| DIN EN ISO 13937-4-2000 |
紡織品.紡織物的撕裂特性.第4部分:舌型試驗樣品撕裂力量的測定 |
(Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) (ISO 13937-4:2000); German version EN ISO 13937-4:2000) |
| DIN EN ISO 13938-1-1999 |
紡織材料.織物破裂特性.第1部分:測定抗破碎強度及爆裂膨脹的液壓方法 |
(Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999); German version EN ISO 13938-1:1999) |
| DIN EN ISO 13938-2-1999 |
紡織材料.織物破裂特性.第2部分:測定抗破裂強度及爆裂膨脹的氣壓方法 |
(Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999); German version EN ISO 13938-2:1999) |
| DIN EN ISO 13943-2000 |
防火安全.詞匯 |
(Fire safety - Vocabulary (ISO 13943:2000); Trilingual version EN ISO 13943:2000) |
| DIN EN ISO 13969-2004 |
奶和奶制品.微生物抑制劑試驗的標準化描述指南 |
|
| DIN EN ISO 13995-2001 |
防護服.機械性能.抗穿刺性和抗動態撕裂性測定的試驗方法 |
(Protective clothing - Mechanical properties - Test method for determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000); German version EN ISO 13995:2000) |
| DIN EN ISO 13997-1999 |
防護服裝.機械特性.抗銳利物劃割能力的測量 |
(Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:1999); German version EN ISO 13997:1999) |
| DIN EN ISO 13998-2003 |
防護服.防小折刀切割和刺穿的圍裙、褲子和背心 |
(Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003); German version EN ISO 13998:2003) |
| DIN EN ISO 140-1-1998 |
聲學.建筑物和建筑構件的隔音測量.第1部分:抑制側向傳輸?shù)膶?shí)驗室試驗裝置的要求 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission (ISO 140-1:1997); German version EN ISO 140-1:1997) |
| DIN EN ISO 140-12-2000 |
聲學.建筑物和建筑構件的隔音測量.第12部分:通道樓板的房間對房間氣載和沖擊聲隔絕的試驗室測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor (ISO 140-12:2000); German version EN ISO 140-12:2000) |
| DIN EN ISO 140-14-2004 |
聲學.建筑物和建筑構件的隔音測量.第14部分:場地的特殊情況的指南 |
|
| DIN EN ISO 140-4-1998 |
聲學.建筑物和建筑構件的隔音測量.第4部分:房間之間氣載聲音隔絕的場測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurement of airborne sound insulation between rooms (ISO 140-4:1998); German version EN ISO 140-4:1998) |
| DIN EN ISO 140-5-1998 |
聲學.建筑物和建筑構件的隔音測量.第5部分:房屋正面和正面構件氣載聲隔絕的測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurement of airborne sound insulation of facade elements and facades (ISO 140-5:1998); German version EN ISO 140-5:1998) |
| DIN EN ISO 140-6-1998 |
聲學.建筑物和建筑構件的隔音測量.第6部分:試驗臺上樓層板蹬踏聲隔絕的測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors (ISO 140-6:1998); German version EN ISO 140-6:1998) |
| DIN EN ISO 140-7-1998 |
聲學.建筑物和建筑構件的隔音測量.第7部分:建筑物里樓層板蹬踏聲隔絕的測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors (ISO 140-7:1998); German version EN ISO 140-7:1998) |
| DIN EN ISO 140-8-1998 |
聲學.建筑物內及建筑構件的隔音性測量.第8部分:負荷標準地板上進行地板鋪面時傳送出的沖擊聲音減弱的實驗室 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor (ISO 140-8:1997); German version EN ISO 14 |
| DIN EN ISO 14001-1996 |
環境管理系統.應用導則規范 |
(Environmental management systems - Specifications with guidance for use (ISO 14001:1996); German version EN ISO 14001:1996) |
| DIN EN ISO 14001-2005 |
環境管理系統.使用的要求和指南 |
|
| DIN EN ISO 1401-2000 |
農業噴霧用橡膠軟管 |
(Rubber hoses for agricultural spraying (ISO 1401:1999); German version EN ISO 1401:1999) |
| DIN EN ISO 1402-1996 |
橡膠和塑料軟管及軟管組件.液壓靜力試驗 |
(Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994); German version EN ISO 1402:1996) |
| DIN EN ISO 14020-2002 |
環境標簽和聲明.一般原則 |
(Environmental labels and declarations - General principles (ISO 14020:2000); German version EN ISO 14020:2001) |
| DIN EN ISO 14021-2001 |
環境標簽和聲明.自聲明的環境要求(II型環境標簽) |
(Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:1999); German version EN ISO 14021:2001) |
| DIN EN ISO 14024-2001 |
環境標簽和聲明.I式環境標簽.原則和規程 |
(Environmental labels and declarations - Type I environmental labelling - Principles and procedures (ISO 14024:1999); German version EN ISO 14024:2000) |
| DIN EN ISO 1403-1997 |
一般目的用水時使用的帶織物加固內襯的橡膠軟管.規范 |
(Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:1995); German version EN ISO 1403:1997) |
| DIN EN ISO 14031-2000 |
環境管理.環境性能評定.導則 |
(Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:1999); German version EN ISO 14031:1999) |
| DIN EN ISO 14040-1997 |
環境管理.生態平衡.原則和總體要求 |
(Environmental management - Life cycle assessment - Principles and framework (ISO 14040:1997); German version EN ISO 14040:1997) |
| DIN EN ISO 14041-1998 |
環境管理.生態平衡.目的,研究領域以及生態平衡標單的確定 |
(Environmental management - Life cycle assessment - Goal and scope definition and life cycle inventory analysis (ISO 14041:1998); German version EN ISO 14041:1998) |
| DIN EN ISO 14042-2000 |
環境管理.生物圈評定.生物圈影響評定 |
(Environmental management - Life cycle assessment - Life cycle impact assessment (ISO 14042:2000); German version EN ISO 14042:2000) |
| DIN EN ISO 14043-2000 |
環境管理.生物圈評定.生物圈解釋 |
(Environmental management - Life cycle assessment - Life cycle interpretation (ISO 14043:2000); German version EN ISO 14043:2000) |
| DIN EN ISO 14111-2000 |
天然氣.分析痕量檢測能力指南 |
(Natural gas - Guidelines to traceability in analysis (ISO 14111:1997); German version EN ISO 14111:1999) |
| DIN EN ISO 14113-1997 |
氣焊設備.最大工作壓力450巴以下壓力液化氣體用橡膠及塑料軟管管道 |
(Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997); German version EN ISO 14113:1997) |
| DIN EN ISO 14114-1999 |
氣焊設備.焊接,切割和相關工藝用乙炔鋼瓶-電池設備.一般要求 |
(Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:1999); German version EN ISO 14114:1999) |
| DIN EN ISO 14122-1-2002 |
機器安全.機器接近的固定方式.第1部分:兩種水平之間的固定方式的選擇 |
(Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001); German version EN ISO 14122-1:2001) |
| DIN EN ISO 14122-2-2002 |
機器安全.機器接近的固定方式.第2部分:工作平臺和通路 |
(Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001); German version EN ISO 14122-2:2001) |
| DIN EN ISO 14122-3-2002 |
機器安全.機器接近的固定方式.第3部分:樓梯、梯子和護欄 |
(Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001); German version EN ISO 14122-3:2001) |
| DIN EN ISO 14122-4-2004 |
機械安全.進入機械的固定方式.第4部分:固定梯子 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com