標準號 |
中文名稱 |
英文名稱 |
| ISO 9528-1994 |
航空航天.標準重量聚四氟乙烯(PTFE)軟管裝置,21000KPa/204℃類.采購規范 |
(Aerospace - Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 C/21 000 kPa - Procurement specification) |
| ISO 9533-1989 |
土方機械.安裝在機器上的前后可聽到的報警信號.聲音試驗方法 |
(Earth-moving machinery; machine-mounted forward and reverse audible warning alarm; sound test method) |
| ISO 9534-1989 |
道路車輛.燃油泵的電聯接 |
(Road vehicles; fuel pump electric connections) |
| ISO 9535-1989 |
木工機械.由板條制芯料產品的機器.術語 |
(Woodworking maschines; machines for production of core stock from laths; nomenclature) |
| ISO 9536-1989 |
木工機械.具有振動刀具的鑿榫眼機 |
(Woodworking machines; mortising machines with oscillating tool action; nomenclature) |
| ISO 9537-1989 |
木工機械.單端邊緣粘合機械.命名法 |
(Woodworking machines; single-end edge bonding machines; nomenclature) |
| ISO 9538-1996 |
航空航天.液壓管接頭及配件.平面彎曲試驗 |
(Aerospace - Hydraulic tubing joints and fittings - Planar flexure test) |
| ISO 9539-1988 |
用于氣焊、切割及有關加工過程設備的材料 |
(Materials for equipment used in gas welding, cutting and allied processes) |
| ISO 9542-1988 |
信息處理系統.系統間的通信和信息交換.與提供非連接式網絡服務的協議一起使用的終端系統至中間系統指定路徑 |
(Information processing systems; telecommunications and information exchange between systems; end system to intermediate system routeing exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO |
| ISO 9543-1989 |
信息處理系統.系統之間信息的互換.DTE/DCE接口的同步變換信號的質量 |
(Information processing systems; information exchange between systems; synchronous transmission signal quality at DTE/DCE interfaces) |
| ISO 9553-1997 |
太陽能.連接器用預制橡膠密封劑和密封結合物的試驗方法 |
(Solar energy - Methods of testing preformed rubber seals and sealing compounds used in collectors) |
| ISO 9554-1991 |
纖維繩.總規范 |
(Fibre ropes; general specification) |
| ISO 9555-1-1994 |
明渠流量的測量.測量穩定流速用的示蹤稀釋法.第1部分:總則 |
(Measurement of liquid flow in open channels - Tracer dilution methods for the measurement of steady flow - Part 1: General) |
| ISO 9555-2-1992 |
明渠液體流量測量.測量穩定流速用的示蹤稀釋法.第2部分:放射示蹤劑 |
(Measurement of liquid flow in open channels; tracer dilution methods for the measurement of steady flow; part 2: radioactive tracers) |
| ISO 9555-3-1992 |
明渠液體流量測量.測量穩定流速用的示蹤稀釋法.第3部分:化學示蹤劑 |
(Measurement of liquid flow in open channels; tracer dilution methods for the measurement of steady flow; part 3: chemical tracers) |
| ISO 9555-4-1992 |
明渠液體流量測量.測量穩定流速用的示蹤稀釋法.第4部分:熒光示蹤劑 |
(Measurement of liquid flow in open channels; tracer dilution methods for the measurement of steady flow; part 4: fluorescent tracers) |
| ISO 9556-1989 |
鋼和鐵.含碳總量的測定.感應電爐燃燒紅外線吸收法 |
(Steel and iron; determination of total carbon content; infrared absorption method after combustion in an induction furnace) |
| ISO 9558-1989 |
木工機械.膠合板切片機.術語 |
(Woodworking machines; veneer slicing machines; nomenclature) |
| ISO 9559-1989 |
攝影技術.35mm幻燈片放映機.(放大)遮幅框 |
(Photography; 35 mm filmstrip projectors; specifications for frame masks) |
| ISO 9562-1998 |
水質.可吸附有機鹵素(AOX)的測定 |
(Water quality - Determination of adsorbable organically bound halogens (AOX)) |
| ISO 9562-2004 |
水質.可吸附鹵素(AOX)的測定 |
|
| ISO 9563-1990 |
皮帶傳動.抗靜電同步環帶的電導率.特性及試驗方法 |
(Belt drives; electrical conductivity of antistatic endless synchronous belts; characteristics and test method) |
| ISO 9564-1-2002 |
銀行業務.個人身份識別號(PIN)管理和保密.第1部分:ATM 和POS 系統聯機處理的基本原則和要求 |
(Banking - Personal Identification Number (PIN) management and security - Part 1: Basic principles and requirements for online handling in ATM and POS systems) |
| ISO 9564-2-1991 |
銀行業務.個人身份識別碼管理和保密.第2部分:個人身份識別碼(PIN)的加密技術或過程的審批程序 |
(Banking; Personal Identification Number management and security; part 2: approved algorithm(s) for PIN encipherment) |
| ISO 9564-3-2003 |
銀行業務.個人識別代碼的管理和安全.第3部分:在ATM和POS系統中的離線PIN操作的要求 |
(Banking - Personal Identification Number management and security - Part 3: Requirements for offline PIN handling in ATM and POS systems) |
| ISO 9564-3-2003 |
銀行業務.個人識別代碼的管理和安全.第3部分:在ATM和POS系統中的離線PIN操作的要求 |
|
| ISO 9565-1990 |
雙輪機動腳踏車.側立停放和直立停放的穩定性 |
(Two-wheeled motorcycles; parking stability of side- and centre-stands) |
| ISO 9566-1989 |
木工機械.單端多軸鑿榫機.命名法 |
(Woodworking machines; Single-end tenoning machines with several spindles; nomenclature) |
| ISO 9567-1989 |
木工機械.四倍功效、木絲用臥式切削機.命名法 |
(Woodworking machines; horizontal shredding machines for wood wool production, quadruple effect; nomenclature) |
| ISO 9568-1993 |
電影技術.影院.審片室和配音室中的背景噪聲級 |
(Cinematography; background acoustic noise levels in theatres, review rooms and dubbing rooms) |
| ISO 9583-1993 |
外科植入物.非破壞性試驗.金屬外科植入物的液體滲透檢驗 |
(Implants for surgery; non-destructive testing; liquid penetrant inspection of metallic surgical implants) |
| ISO 9584-1993 |
外科植入物.非破壞性試驗.鑄造金屬外科植入物的X射線檢查 |
(Implants for surgery; non-destructive testing; radiographic examination of cast metallic surgical implants) |
| ISO 9585-1990 |
外科植入物.骨板彎曲強度和剛度的測定 |
(Implants for surgery; determination of bending strength and stiffness of bone plates) |
| ISO 9587-1999 |
金屬和其它無機覆層.減少氫脆風險的鐵或鋼的預處理 |
(Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement) |
| ISO 9588-1999 |
金屬和其他無機涂層.為減輕氫脆危險的鐵和鋼的后包覆處理 |
(Metallic and other inorganic coatings - Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement) |
| ISO 9589-1994 |
建筑物自動扶梯的尺寸 |
(Escalators - Building dimensions) |
| ISO 959-1-1998 |
胡椒(胡椒科),胡椒粒和粉.規范.第1部分:黑胡椒 |
(Pepper (Piper nigrum L.), whole or ground - Specification - Part 1: Black pepper) |
| ISO 959-2-1998 |
胡椒(胡椒科),胡椒粒和粉.規范.第1部分:黑胡椒 |
(Pepper (Piper nigrum L.), whole or ground - Specification - Part 2: White pepper) |
| ISO 9591-1992 |
鋁合金的耐腐蝕性.抗應力腐蝕裂紋的測定 |
(Corrosion of aluminium alloys; determination of resistance to stress corrosion cracking) |
| ISO 9591-2004 |
鋁合金的腐蝕.抗應力腐蝕裂紋的測定 |
|
| ISO 9597-1989 |
水泥.試驗方法.凝固時間及堅實度的測定 |
(Cements; test methods; determination of setting time and soundness) |
| ISO 9598-1989 |
受壓力的無縫鋼管.橫向缺陷檢驗用全周邊磁換能器鐵涂氧磁管漏檢驗 |
(Seamless steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections) |
| ISO 9599-1991 |
銅、鉛和硫化鋅精礦.在分析樣品中濕存水的測定.重量法 |
(Copper, lead and zinc sulfide concentrates; determination of hygroscopic moisture in the analysis sample; gravimetric method) |
| ISO 96-1-1992 |
紡織機械和附件.環綻紡紗和環綻捻線的鋼領圈和鋼絲圈.第1部分:T型鋼領圈和相應鋼絲圈 |
(Textile machinery and accessories; rings and travellers for ring spinning and ring doubling frames; part 1: T-rings and their appropriate travellers) |
| ISO 96-2-1992 |
紡織機械和附件.環綻紡紗和環綻捻線的鋼領圈和鋼絲圈.第2部分:HZCH型、HZ型和J型鋼領圈和相應鋼絲圈 |
(Textile machinery and accessories; rings and travellers for ring spinning and ring doubling frames; part 2: HZCH-, HZ- and J-rings and their appropriate travellers) |
| ISO 9606-1 AMD 1-1998 |
焊工的驗收試驗.熔焊.第1部分:鋼.修改件1 |
(Approval testing of welders - Fusion welding - Part 1: Steels; Amendment 1) |
| ISO 9606-1-1994 |
焊工的驗收試驗.熔焊.第1部分:鋼 |
(Approval testing of welders - Fusion welding - Part 1: Steels) |
| ISO 9606-2 AMD 1-1998 |
焊工的驗收試驗.熔焊.第2部分:鋁和鋁合金.修改件1 |
(Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys; Amendment 1) |
| ISO 9606-2-1994 |
焊工的驗收試驗.熔焊.第2部分:鋁和鋁合金 |
(Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys) |
| ISO 9606-3-1999 |
焊工的驗收試驗.熔焊.第3部分:銅和銅合金 |
(Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys) |
| ISO 9606-4-1999 |
焊工的驗收試驗.熔焊.第4部分:鎳和鎳合金 |
(Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys) |
| ISO 9606-5-2000 |
焊工的驗收試驗.熔焊.第5部分:鈦和鈦合金.鋯和鋯合金 |
(Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys) |
| ISO 9608-1994 |
V型皮帶.皮帶的均勻性.中心距離的變化的測定用試驗方法 |
(V-belts - Uniformity of belts - Test method for determination of centre distance variation) |
| ISO 9609-1996 |
航空航天. 在大氣壓力為450 MPa(室溫為120℃)時、在大氣壓力為450 MPa(室溫為235℃)時、在大氣壓力為600 MP |
(室溫為235(Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 C, 450 MPa (at ambient temperature)/235 C, 600 MPa (at ambient temperature)/425 C, 900 MPA (at ambie |
| ISO 9611-1996 |
聲學.關于相關結構聲輻射的結構噪聲的聲源特性記述.彈性聯接時機械裝置在接觸點的聲速測量 |
(Acoustics - Characterization of sources of structure-borne sound with respect to sound radiation from connected structures - Measurement of velocity at the contact points of machinery when resiliently mounted) |
| ISO 9612-1997 |
聲學.暴露在工作場中的噪音的測量和評定導則 |
(Acoustics - Guidelines for the measurement and assessment of exposure to noise in a working environment) |
| ISO 9613-1-1993 |
聲學.室外聲傳播衰減.第1部分:大氣吸收聲音的計算 |
(Acoustics; attenuation of sound during propagation outdoors; part 1: calculation of the absorption of sound by the atmosphere) |
| ISO 9613-2-1996 |
聲學.室外聲傳播衰減.第2部分:計算的一般方法 |
(Acoustics - Attenuation of sound during propagation outdoors - Part 2: General method of calculation) |
| ISO 9614-1-1993 |
聲學.利用聲音強度測定噪聲源功率級.第1部分:離散點測量 |
(Acoustics; determination of sound power levels of noise sources using sound intensity; part 1: measurement at discrete points) |
| ISO 9614-2-1996 |
聲學.利用聲音強度測定噪聲源功率級.第2部分:掃描測量法 |
(Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning) |
| ISO 9614-3-2002 |
聲學.利用聲音強度測定噪聲源功率級.第3部分:掃描測量精度法 |
(Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurements by scanning) |
| ISO 9615-1989 |
木工機械.帶有液壓夾緊裝置的木絲用立式切碎機.命名法 |
(Woodworking machines; vertical shredding machines for wood wool production, with hydraulic clamping; nomenclature) |
| ISO 9616-1989 |
木工機械.建筑基地用圓鋸機.命名法 |
(Woodworking machines; circular sawing machines for building sites; nomenclature) |
| ISO 9617-1989 |
木工機械.平行升降臺和臺架.命名法 |
(Woodworking machines; lifting tables and stages; nomenclature) |
| ISO 9618-1996 |
航空航天.帶MJ螺紋的高度降低的標準十字形平頭有槽(齒形)六角頭螺母.級別:450MPa(室溫下)/120℃、450MPa(室 |
((Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 C, 450 MPa (at ambient temperature)/235 C, 600 MPa (at ambient temperature)/425 C, 900 MPa (a |
| ISO 9619 AMD 1-2002 |
客車.擋風玻璃刮水系統.試驗方法.修改件1 |
(Passenger cars - Windscreen wiping systems - Test methods; Amendment 1) |
| ISO 962-1974 |
信息處理.9 磁道寬12.7mm(0.5in)磁帶7位編碼字符集及其7位和8位擴大字符集的執行過程 |
(Information processing; Implementation of the 7- bit coded character set and its 7- bit and 8-bit extensions on 9- track 12,7 mm (0.5 in) magnetic tape) |
| ISO 9622-1999 |
全脂牛奶.牛奶脂肪、蛋白質和乳糖含量的測定.中級紅外設備操作指南 |
(Whole milk - Determination of milkfat, protein and lactose content - Guidance on the operation of mid-infrared instruments) |
| ISO 9623-1997 |
負壓流體用聚乙烯(PE)/金屬和聚丙烯(PP)/金屬加減裝置.螺紋的設計長度和尺寸.米制系列 |
(PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure - Design lengths and size of threads - Metric series) |
| ISO 9624-1997 |
負壓流體用熱塑性塑料管.法蘭銜接器和可置換襯板法蘭的適配尺寸 |
(Thermoplastics pipes for fluids under pressure - Mating dimensions of flange adapters and loose backing flanges) |
| ISO 9625-1993 |
溉灌用聚乙烯壓力管機械連接配件 |
(Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes) |
| ISO 9626 AMD 1-2001 |
醫療裝置生產用不銹鋼針管.修改件1 |
(Stainless steel needle tubing for the manufacture of medical devices; Amendment 1) |
| ISO 9626-1991 |
醫療器件制造用不銹鋼針狀管材 |
(Stainless steel needle tubing for manufacture of medical devices) |
| ISO 9628-1992 |
滾動軸承.鑲?cè)胼S承和偏心鎖套圈 |
(Rolling bearings; insert bearings and eccentric locking collars) |
| ISO 9631-1991 |
橡膠密封件.最高溫度為110℃的熱水供給管道的密封環.材料規范 |
(Rubber seals; joint rings for hot water supply pipelines up to 110 鳦; specification for the material) |
| ISO 9631-2003 |
橡膠密封件.溫度為110℃及以下的熱水供給管道用密封圈.材料規范 |
|
| ISO 9633-2001 |
自行車鏈.特性和試驗方法 |
(Cycle chains - Characteristics and test methods) |
| ISO 9642-1993 |
電影技術.每秒24.25和30畫面電影攝制系統的時間和控制碼規范 |
(Cinematography; time and control code for 24, 25 and 30 frames per second motion-picture systems; specifications) |
| ISO 9644 AMD 1-1998 |
農業灌溉設備.灌溉閥壓力損失.試驗方法.修改件1 |
(Agricultural irrigation equipment - Pressure losses in irrigation valves - Test method; Amendment 1) |
| ISO 9644-1993 |
農業灌溉設備.灌溉閥壓力損失.試驗方法 |
(Agricultural irrigation equipment; pressure losses in irrigation valves; test method) |
| ISO 9645-1990 |
聲學.兩輪式機動自行車行駛時發出噪聲的測定.工程法 |
(Acoustics; measurement of noise emitted by two-wheeled mopeds in motion; engineering method) |
| ISO 9647-1989 |
鋼和鐵.釩含量的測定.火焰原子吸收光譜(分析)法 |
(Steel and iron; determination of vanadium content; flame atomic absorption spectrometric method) |
| ISO 9648-1988 |
高粱.鞣酸含量的測定 |
(Sorghum; determination of tannin content) |
| ISO 9649-1990 |
金屬材料.金屬絲.反復扭轉試驗 |
(Metallic materials; wire; reverse torsion test) |
| ISO 965-1-1998 |
一般用途米制螺紋.公差.第1部分:原則和基本數據 |
(ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data) |
| ISO 965-2-1998 |
一般用途米制螺紋.公差.第2部分:一般用途的內螺紋和外螺紋的尺寸限制.中等質量 |
(ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality) |
| ISO 965-3-1998 |
一般用途米制螺紋.公差.第2部分:結構螺紋的偏差 |
(ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads) |
| ISO 965-4-1998 |
一般用途米制螺紋.公差.第4部分:與由鍍鋅后公差位置為H或G攻出的內螺紋相匹配的熱浸鍍鋅外螺紋的尺寸限制 |
(ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing) |
| ISO 965-5-1998 |
一般用途米制螺紋. 公差.第5部分:與鍍鋅前最大公差位置為H的熱浸鍍鋅外螺紋相匹配的內螺紋的尺寸限制 |
(ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing) |
| ISO 9652-2-2000 |
磚石工程.第2部分:根據普通規則設計的未增強的磚石工程 |
(Masonry - Part 2: Unreinforced masonry design by simple rules) |
| ISO 9652-4-2000 |
磚石工程.第4部分:試驗方法 |
(Masonry - Part 4: Test methods) |
| ISO 9652-5-2000 |
磚石工程.第5部分:詞匯 |
(Masonry - Part 5: Vocabulary) |
| ISO 9653-1998 |
粘合劑.粘合劑粘結的剪切沖擊強度試驗方法 |
(Adhesives - Test method for shear impact strength of adhesive bonds) |
| ISO 9654-1989 |
電子工程用夾扭鉗和剪切鉗.單一用途鉗.剪切鉗 |
(Pliers and nippers for electronics; single-purpose nippers; cutting nippers) |
| ISO 9654-2004 |
電訊夾扭鉗和剪切鉗.專用鉗.剪切鉗 |
|
| ISO 9655-1989 |
電子工程用夾扭鉗和剪切鉗.專用夾扭鉗.夾緊和控制用夾扭鉗 |
(Pliers and nippers for electronics; single-purpose pliers; pliers for gripping and manipulating) |
| ISO 9655-2004 |
電訊夾扭鉗和剪切鉗.專用鉗.夾扭鉗 |
|
| ISO 9656-1989 |
電子工程用夾扭鉗和剪切鉗.試驗方法 |
(Pliers and nippers for electronics - Test methods) |
| ISO 9656-2004 |
電訊夾扭鉗和剪切鉗.試驗方法 |
|
| ISO 9657-1989 |
電子工程用夾扭鉗和剪切鉗.一般技術要求 |
(Pliers and nippers for electronics; general technical requirements) |
| ISO 9657-2004 |
電訊夾扭鉗和剪切鉗.通用技術條件 |
|
| ISO 9658-1990 |
鋼.鋯含量的測定.火焰原子吸收光譜法 |
(Steel; determination of aluminium content; flame atomic absorption spectrometric method) |
| ISO 9660-1988 |
信息處理.信息交換用CD-ROM的卷和文件結構 |
(Information processing; volume and file structure of CD-ROM for information interchange) |
| ISO 9662-1994 |
飛機設備.機上設備的環境和操作條件.濕度,溫度和壓力試驗 |
(Aircraft equipment; environmental and operating conditions for airborne equipment; humidity, temperature and pressure tests) |
| ISO 9664-1993 |
粘合劑.拉伸剪切結構膠粘劑疲勞性能的試驗方法 |
(Adhesives; test methods for fatigue properties of structural adhesives in tensile shear) |
| ISO 9665-1998 |
粘合劑.動物膠.取樣和試驗方法 |
(Adhesives - Animal glues - Methods of sampling and testing) |
| ISO 9667-1998 |
飛機地面供應設備.牽引桿 |
(Aircraft ground support equipment - Tow bars) |
| ISO 9668-1990 |
紙漿.鎂含量的測定.火焰原子吸收光譜法 |
(Pulps; determination of magnesium content; flame atomic absorption spectrometric method) |
| ISO 9669 AMD 1-1992 |
貨運集裝箱系列1.罐式集裝箱用界面連接.修改件1:3節和4節 |
(Series 1 freight containers; interface connections for tank containers; amendment 1: sections 3 and 4) |
| ISO 9669-1990 |
貨運集裝箱系列1.罐式集裝箱用接合設備 |
(Series 1 freight containers; interface connections for tank containers) |
| ISO 9678-1991 |
飛機.自行式飲用水運送車 |
(Aircraft; self-propelled potable-water vehicle) |
| ISO 9680 Technical Corrigendum 1-1995 |
牙科工作燈.技術勘誤表1 |
(Dental operating light; Technical Corrigendum 1) |
| ISO 9680-1993 |
牙科工作燈 |
(Dental operating light) |
| ISO 9681-1990 |
錳礦石和錳精礦.鐵含量的測定.火焰原子吸收光譜測定法 |
(Manganese ores and concentrates; determination of iron content; flame atomic absorption spectrometric method) |
| ISO 9682-1-1991 |
鐵礦石.錳含量的測定.第1部分:火焰原子吸收光譜法 |
(Iron ores; determination of manganes content; part 1: flame atomic absorption spectrometric method) |
| ISO 9683-1991 |
鐵礦石.釩含量的測定.BPHA分光光度法 |
(Iron ores; determination of vanadium content; BPHA spectrophotometric method) |
| ISO 9684-1991 |
鐵礦石.釩含量的測定.火焰原子吸收光譜法 |
(Iron ores; determination of vanadium content; flame atomic absorption spectrometric methods) |
| ISO 9685-1991 |
鐵礦石.鎳和/或鉻含量的測定.火焰原子吸收光譜法 |
(Iron ores; determination of nickel and/or chronium contents; flame atomic absorption spectrometric method) |
| ISO 9686-1992 |
直接還原鐵.碳和/或硫含量測定.具有紅外測量的高頻燃燒法 |
(Direct reduced iron; determination of carbon and/or sulfur content; high frequency combustion method with infrared measurement) |
| ISO 9687-1993 |
牙科設備.圖形符號 |
(Dental equipment; graphical symbols) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com