標準號 |
中文名稱 |
英文名稱 |
| ISO 3085-2002 |
鐵礦石.檢驗精確取樣的實驗方法 |
(Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement) |
| ISO 3086-1998 |
鐵礦石.取樣偏差檢驗的實驗法 |
(Iron ores - Experimental methods for checking the bias of sampling) |
| ISO 3087-1998 |
鐵礦石.潮濕度含量的測定 |
(Iron ores - Determination of the moisture content of a lot) |
| ISO 3089-1991 |
機床的自動定心、手工操作卡盤.驗收檢驗規范(幾何參數檢驗) |
(Self-centring manually-operated chucks for machine tools; acceptance test specifications (geometrical tests)) |
| ISO 3090-1974 |
繩索和繩索制品.網衣線.浸水后長度變化的測定 |
(Ropes and cordage; Netting yarns; Determination of change in length after immersion in water) |
| ISO 3091-1975 |
肉和肉制品.硝酸鹽含量的測定(參照法) |
(Meat and meat products; determination of nitrate content (reference method)) |
| ISO 3093-1982 |
谷類.沉降指數的測定 |
(Cereals; determination of falling number) |
| ISO 3093-2004 |
小麥、黑麥和相應的作物粉、硬粒小麥和硬粒小麥粉.根據HAGBERG-PERTEN測定降落數值 |
|
| ISO 3095-1975 |
聲學.有軌車輛發出的噪音的測量 |
(Acoustics; Measurement of noise emitted by railbound vehicles) |
| ISO 3096 Technical Corrigendum 1-1999 |
滾動軸承.針滾柱.尺寸和公差.技術勘誤1 |
(Rolling bearings - Needle rollers - Dimensions and tolerances; Technical Corrigendum 1) |
| ISO 3096-1996 |
滾動軸承.滾針的尺寸和公差 |
(Rolling bearings - Needle rollers - Dimensions and tolerances) |
| ISO 3098-0-1997 |
技術產品文獻.按字母分類.第0部分:一般要求 |
(Technical product documentation - Lettering - Part 0: General requirements) |
| ISO 3098-2-2000 |
技術產品文獻.字體.第2部分:拉丁字母表、數字和符號 |
(Technical product documentation - Lettering - Part 2: Latin alphabet, numerals and marks) |
| ISO 3098-3-2000 |
技術產品文獻.字體.第3部分:希臘字母表 |
(Technical product documentation - Lettering - Part 3: Greek alphabet) |
| ISO 3098-4-2000 |
技術產品文獻.字體.第4部分:拉丁字母表用的區分標記和特殊標記 |
(Technical product documentation - Lettering - Part 4: Diacritical and particular marks for the Latin alphabet) |
| ISO 3098-5-1997 |
技術產品文獻.按文字分類.第5部分:拉丁字母,數字和標志的CAD文字分類法 |
(Technical product documentation - Lettering - Part 5: CAD lettering of the Latin alphabet, numerals and marks) |
| ISO 3098-6-2000 |
技術產品文獻.字體.第6部分:西里爾字母表 |
(Technical product documentation - Lettering - Part 6: Cyrillic alphabet) |
| ISO 31-0 AMD 1-1998 |
量值和單位.第0部分:總則.補充件1 |
(Quantities and units - Part 0: General principles; Amendment 1) |
| ISO 31-0-1992 |
量值和單位.第0部分:總則 |
(Quantities and units; part 0: general principles) |
| ISO 31-1 AMD 1-1998 |
量值和單位.第1部分:空間和時間.補充件1 |
(Quantities and units - Part 1: Space and time; Amendment 1) |
| ISO 31-1-1992 |
量值和單位.第1部分:空間和時間 |
(Quantities and units; part 1: space and time) |
| ISO 31-10 AMD 1-1998 |
量值和單位.第10部分:核反應和離子輻射.補充件1 |
(Quantities and units - Part 10: Nuclear reactions and ionizing radiations; Amendment 1) |
| ISO 31-10-1992 |
量值和單位.第10部分:核反應和電離輻射 |
(Quantities and units; part 10: nuclear reactions and ionizing radiations) |
| ISO 31-11-1992 |
量值和單位.第11部分:物理學和技術科學使用的數學符號 |
(Quantities and units; part 11: mathematical signs and symbols for use in the physical sciences and technology) |
| ISO 31-12 AMD 1-1998 |
量值和單位.第12部分:特性數字.補充件1 |
(Quantities and units - Part 12: Characteristic numbers; Amendment 1) |
| ISO 31-12-1992 |
量值和單位.第12部分:特征數 |
(Quantities and units; part 12: characteristic numbers) |
| ISO 31-13 AMD 1-1998 |
量值和單位.第13部分:固體物理學.補充件1 |
(Quantities and units - Part 13: Solid state physics; Amendment 1) |
| ISO 31-13-1992 |
量值和單位.第13部分:固體物理學 |
(Quantities and units; part 13: solid state physics) |
| ISO 31-2 AMD 1-1998 |
量值和單位.第2部分:周期的和相關現象.補充件1 |
(Quantities and units - Part 2: Periodic and related phenomena; Amendment 1) |
| ISO 31-2-1992 |
量值和單位.第2部分:周期和有關現象 |
(Quantities and units; part 2: periodic and related phenomena) |
| ISO 31-3 AMD 1-1998 |
量值和單位.第3部分:力學.補充件1 |
(Quantities and units - Part 3: Mechanics; Amendment 1) |
| ISO 31-3-1992 |
量值和單位.第3部分:力學 |
(Quantities and units; part 3: mechanics) |
| ISO 31-4 AMD 1-1998 |
量值和單位.第4部分:熱學,補充件1 |
(Quantities and units - Part 4: Heat; Amendment 1) |
| ISO 31-4-1992 |
量值和單位.第4部分:熱學 |
(Quantities and units; part 4: heat) |
| ISO 31-5 AMD 1-1998 |
量值和單位.第5部分:電學和磁學,補充件1 |
(Quantities and units - Part 5: Electricity and magnetism; Amendment 1) |
| ISO 31-5-1992 |
量值和單位.第5部分:電學和磁學 |
(Quantities and units; part 5: electricity and magnetism) |
| ISO 31-6 AMD 1-1998 |
量值和單位.第6部分:光和相關電磁輻射.補充件1 |
(Quantities and units - Part 6: Light and related electromagnetic radiations; Amendment 1) |
| ISO 31-6-1992 |
量值和單位.第6部分:光學和相關電磁輻射 |
(Quantities and units; part 6: light and related electromagnetic radiations) |
| ISO 31-7 AMD 1-1998 |
量值和單位.第7部分:聲學,補充件1 |
(Quantities and units - Part 7: Acoustics; Amendment 1) |
| ISO 31-7-1992 |
量值和單位.第7部分:聲學 |
(Quantities and units; part 7: acoustics) |
| ISO 31-8 AMD 1-1998 |
量值和單位.第8部分:物理化學和分子物理學.補充件1 |
(Quantities and units - Part 8: Physical chemistry and molecular physics; Amendment 1) |
| ISO 31-8-1992 |
量值和單位.第8部分:物理化學和分子物理學 |
(Quantities and units; part 8: physical chemistry and molecular physics) |
| ISO 31-9 AMD 1-1998 |
量值和單位.第9部分:原子和核物理學,補充件1 |
(Quantities and units - Part 9: Atomic and nuclear physics; Amendment 1) |
| ISO 31-9-1992 |
量值和單位.第9部分:原子核物理學 |
(Quantities and units; part 9: atomic and nuclear physics) |
| ISO 310-1992 |
錳礦石和錳精礦.分析試樣中吸濕量的測定.重量法 |
(Manganese ores and concentrates; determination of hygroscopic moisture content in analytical samples; gravimetric method) |
| ISO 3100-1-1991 |
肉和肉制品.試驗用樣品取樣和制備.第1部分:取樣 |
(Meat and meat products; sampling and preparation of test samples; part 1: sampling) |
| ISO 3100-2-1988 |
肉和肉類制品.取樣.第2部分:微生物檢驗的試樣制備 |
(Meat and meat products; Sampling and preparation of test samples; part 2: preparation of test samples for microbiological examination) |
| ISO 3101-1981 |
車輪和腳輪.有三個固定孔的三角形頂板 |
(Wheels and castors; Triangular top plates with three fixing holes) |
| ISO 3102-1981 |
非機動裝置的車輪和腳輪.轉軸腳輪的偏位 |
(Wheels and castors for non-powered equipment; Off-set for swivel castors) |
| ISO 3103-1980 |
茶葉.感官嘗試用茶液的制備 |
(Tea; Preparation of liquor for use in sensory tests) |
| ISO 3104 Technical Corrigendum 1-1997 |
石油產品.透明和不透明液體.運動粘度的測定和動力粘度的計算.技術勘誤1 |
(Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity; Technical corrigendum 1) |
| ISO 3104-1994 |
石油產品.透明和不透明液體.運動粘度的測定和動力粘度的計算 |
(Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity) |
| ISO 3105-1994 |
玻璃毛細現象動態粘度計.規范和操作說明 |
(Glass capillary kinematic viscometers - Specifications and operating instructions) |
| ISO 3107-1988 |
牙科氧化鋅/丁子香酚粘固材料 |
(Dental zinc oxide/eugenol cements and zinc oxide non-eugenol cements) |
| ISO 3107-2004 |
牙科學.氧化鋅/丁香酚及不含丁香酚的氧化鋅粘固粉 |
|
| ISO 3107-2004 |
牙科學.氧化鋅/丁香酚及不含丁香酚的氧化鋅粘固粉 |
|
| ISO 3108-1974 |
通用鋼絲繩.實際斷裂載荷的測定 |
(Steel wire ropes for general purposes; Determination of actual breaking load) |
| ISO 3110-1975 |
銅合金.合金素鋁含量的測定.容量法 |
(Copper alloys; Determination of aluminium as alloying element; Volumetric method) |
| ISO 3111-1975 |
銅合金.合金素錫含量的測定.容量法 |
(Copper alloys; Determination of tin as alloying element; Volumetric method) |
| ISO 3112-1975 |
銅和銅合金.鉛含量的測定.萃取滴定法 |
(Copper and copper alloys; Determination of lead; Extracting titration method) |
| ISO 3114-1977 |
供應飲用水的未增塑聚氯乙烯(PVC)管.鉛和錫的可萃取性.試驗方法 |
(Unplasticized polyvinyl chloride (PVC) pipes for potable water supply; Extractability of lead and tin; Test method) |
| ISO 3116-2001 |
鎂和鎂合金.鍛壓鎂合金 |
(Magnesium and magnesium alloys - Wrought magnesium alloys) |
| ISO 3117-1977 |
切向鍵和鍵槽 |
(Tangential keys and keyways) |
| ISO 3118-1976 |
工業用過硼酸鈉.用機械篩分法測定顆粒大小分布 |
(Sodium perborates for industrial use; Determination of particle size distribution by mechanical sieving) |
| ISO 3119-1976 |
工業用硼酸,氧化硼和四硼酸二鈉.鉻含量的測定.二苯卡巴肼光度法 |
(Boric acid, boric oxide and disodium tetraborates for industrial use; Determination of chromium content; Diphenylcarbazide photometric method) |
| ISO 312-1986 |
錳礦石.二氧化錳表示的活性氧含量測定.滴定法 |
(Manganese ores; Determination of active oxygen content, expressed as manganese dioxide; Titrimetric method) |
| ISO 3120-1976 |
工業用四硼酸二鈉和粗硼酸鈉.水含量的測定.重量法 |
(diSodium tetraborates and crude sodium borates for industrial use; Determination of water content; Gravimetric method) |
| ISO 3121-1976 |
工業用硼酸,氧化硼和四硼酸二鈉.氯化物含量的測定.汞液滴定法 |
(Boric acid, boric oxide and disodium tetraborates for industrial use; Determination of chloride content; Mercurimetric method) |
| ISO 3122-1976 |
工業用硼酸,氧化硼.四硼酸二鈉,過硼酸鈉和粗硼酸鹽.鐵含量的測定.2.2`-聯吡啶光度法 |
(Boric acid, boric oxide, disodium tetraborates, sodium perborates and crude borates for industrial use; Determination of iron content; 2,2`- Bipyridyl photometric method) |
| ISO 3123-1976 |
工業用過硼酸鈉.溶解速率的測定.電導率法 |
(Sodium perborates for industrial use; Determination of rate of solution; Conductivity method) |
| ISO 3124-1976 |
工業用粗硼酸鈉.堿介質可溶鐵含量的測定.2,2`-聯吡啶光度法 |
(Crude sodium borates for industrial use; Determination of iron soluble in alkaline medium; 2,2`- Bipyridyl photometric method) |
| ISO 3125-1976 |
工業用粗硼酸鈉.堿介質可溶鋁含量的測定.乙二胺四乙酸(EDTA)滴定法 |
(Crude sodium borates for industrial use; Determination of aluminium soluble in alkaline medium; EDTA titrimetric method) |
| ISO 3126-1974 |
塑料管.尺寸測量 |
(Plastics pipes; Measurement of dimensions) |
| ISO 3127-1994 |
熱塑性塑料管.抗外部沖擊的測定.晝夜法 |
(Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method) |
| ISO 3129-1975 |
木材.物理和機械試驗的取樣方法和一般要求 |
(Wood; Sampling methods and general requirements for physical and mechanical tests) |
| ISO 3130-1975 |
木材.供物理和物理試驗用的水份含量的測定 |
(Wood; Determination of moisture content for physical and mechanical tests) |
| ISO 3131-1975 |
木材.供物理和機械試驗用的密度測定 |
(Wood; Determination of density for physical and mechanical tests) |
| ISO 3132-1975 |
木材.垂直于木紋的壓縮試驗 |
(Wood; Testing in compression perpendicular to grain) |
| ISO 3133-1975 |
木材.靜態彎曲的極限強度的測定 |
(Wood; Determination of ultimate strength in static bending) |
| ISO 3134-1-1985 |
輕金屬及其合金.術語和定義.第1部分:材料.三種語言版 |
(Light metals and their alloys; Terms and definitions; Part 1 : Materials Trilingual edition) |
| ISO 3134-2-1985 |
輕金屬及其合金.術語和定義.第2部分:未加工品.三種語言版 |
(Light metals and their alloys; Terms and definitions; Part 2 : Unwrought products Trilingual edition) |
| ISO 3134-3-1985 |
輕金屬及其合金.術語和定義.第3部分:鍛制品.三種語言版 |
(Light metals and their alloys; Terms and definitions; Part 3 : Wrought products Trilingual edition) |
| ISO 3134-4-1985 |
輕金屬及其合金.術語和定義.第4部分:鑄件.三種語言版 |
(Light metals and their alloys; Terms and definitions; Part 4 : Castings Trilingual edition) |
| ISO 3134-5-1981 |
輕金屬及其合金.術語和定義.第5部分:加工和處理方法 |
(Light metals and their alloys; Terms and definitions; Part 5 : Methods of processing and treatment) |
| ISO 3136-1983 |
橡膠膠乳.苯乙烯一丁二烯.結合的苯乙烯含量的測定 |
(Rubber latex; Styrene-butadiene; Determination of bound styrene content) |
| ISO 3137-1974 |
工業用無水氟化氫.取樣 |
(Anhydrous hydrogen fluoride for industrial use; Sampling) |
| ISO 3138-1974 |
工業用無水氟化氫.不揮發酸含量的測定.滴定法 |
(Anhydrous hydrogen fluoride for industrial use; Determination of non-volatile acid content; Titrimetric method) |
| ISO 3139 AMD 1-1980 |
第1次修改 |
(Aqueous hydrofluoric acid for industrial use; sampling and methods of tests; amendment 1) |
| ISO 3139-1976 |
工業用含水氫氟酸.取樣和試驗方法 |
(Aqueous hydrofluoric acid for industrial use; Sampling and methods of test) |
| ISO 314-1981 |
錳礦石.二氧化碳含量的測定.重量法 |
(Manganese ores; Determination of carbon dioxide content; Gravimetric method) |
| ISO 3140-1990 |
用機械加工榨取的甜橙油 |
(Oil of sweet orange Citrus sinensis (Linnaeus) Obsbeck obtained by mechanical treatment) |
| ISO 3141-1997 |
丁香葉油 |
(Oil of clove leaves [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]) |
| ISO 3142-1997 |
丁香花油 |
(Oil of clove buds [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]) |
| ISO 3143-1997 |
丁香莖油 |
(Oil of clove stems [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]) |
| ISO 3144-1974 |
工業用二硫化碳.取樣和試驗方法 |
(Carbon disulphide for industrial use; Sampling and methods of test) |
| ISO 3146 Technical Corrigendum 1-2002 |
塑料.用毛細管和偏振顯微鏡測定半晶狀聚合物的熔化性能(熔化溫度或熔化區域).技術勘誤1 |
(Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods; Technical Corrigendum 1) |
| ISO 3146-2000 |
塑料.用毛細管和偏振顯微鏡測定半晶狀聚合物的熔化性能(熔化溫度或熔化區域) |
(Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods) |
| ISO 3147-1975 |
熱交換器.供水或供汽主回路的熱平衡檢驗.原則和試驗要求 |
(Heat exchangers; Verification of thermal balance of water-fed or steam-fed primary circuits; Principles and test requirements) |
| ISO 3148-1975 |
散熱器、換流器和同類設備.散熱率的測定.封閉式氣冷室試驗法 |
(Radiators, convectors and similar appliances; Determination of thermal output; Test method using air-cooled closed booth) |
| ISO 3149-1975 |
散熱器、換流器和同類設備.散熱率的測定.封閉式液冷室試驗法 |
(Radiators, convectors and similar appliances; Determination of thermal output; Test method using liquid-cooled closed booth) |
| ISO 315-1984 |
錳礦石和錳精礦.鎳含量的測定.丁二酮肟光譜測定法和原子吸收光譜測定法 |
(Manganese ores and concentrates; Determination of nickel content; Dimethylglyoxime spectrometric method and flame atomic absorption spectrometric method) |
| ISO 3150-1975 |
散熱器、換流器和同類設備.熱功率的計算及其結果的表達形式 |
(Radiators, convectors and similar appliances; Calculation of thermal output and presentation of results) |
| ISO 3154-1988 |
礦井提升用的絞合鋼絲繩.交貨的技術要求 |
(Stranded wire ropes for mine hoisting; technical delivery requirements) |
| ISO 3155-1976 |
礦井提升用的絞合鋼絲繩.分組構成.特性和試驗 |
(Stranded wire ropes for mine hoisting; Fibre components; Characteristics and tests) |
| ISO 3156-1976 |
礦井提升用的絞合鋼絲繩.防銹劑.潤滑劑和維修保養.特性和試驗 |
(Stranded wire ropes for mine hoisting; Impregnating compounds, lubricants and service dressings; Characteristics and tests) |
| ISO 3157-1991 |
計時儀表用的輻射發光.時間測量儀表的輻射發光.規范 |
(Radioluminescence for time measurement instruments; specifications) |
| ISO 3158-1976 |
計時儀表.檢驗方位的標識 |
(Timekeeping instruments; Symbolization of control positions) |
| ISO 3159-1976 |
計時儀表.有彈簧平衡擺的手表 |
(Timekeeping instruments; Wrist-chronometers with spring balance oscillator) |
| ISO 316-1982 |
錳礦石.鈷含量的測定.亞硝基R鹽光度測定法 |
(Manganese ores; Determination of cobalt content; Nitroso-R-salt photometric method) |
| ISO 3160-1 AMD 1-2000 |
表殼和附件.金合金殼.第1部分:一般要求.修改件1 |
(Watch-cases and accessories - Gold alloy coverings - Part 1: General requirements; Amendment 1) |
| ISO 3160-1-1998 |
表殼和附件.金合金殼.第1部分:一般要求 |
(Watch-cases and accessories - Gold alloy coverings - Part 1: General requirements) |
| ISO 3160-2-2003 |
表殼和附件.金合金殼.第2部分:光潔度、厚度、抗腐蝕性和粘附性測定 |
(Watch-cases and accessories - Gold alloy coverings - Part 2: Determination of fineness, thickness, corrosion resistance and adhesion) |
| ISO 3160-2-2003 |
表殼和附件.金合金殼.第2部分:光潔度、厚度、抗腐蝕性和粘附性測定 |
|
| ISO 3160-3-1993 |
表殼和附件.金合金殼.第3部分:標準厚度表層耐磨試驗 |
(Watch cases and accessories; gold alloy coverings; part 3: abrasion resistance tests of a type of coating on standard gauges) |
| ISO 3161-1999 |
航空航天.UNJ螺紋.一般要求和限制尺寸 |
(Aerospace - UNJ threads - General requirements and limit dimensions) |
| ISO 3164-1995 |
土方機械.保護結構的實驗室評定.偏差極限容量規范 |
(Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume) |
| ISO 3165-1976 |
工業用化學制品取樣.取樣的安全性 |
(Sampling of chemical products for industrial use; Safety in sampling) |
| ISO 3166-1-1997 |
國家和他們的地區名的代碼表示法.第1部分:地區代碼 |
(Codes for the representation of names of countries and their subdivisions - Part 1: Country codes) |
| ISO 3166-2-1998 |
國家和他們的地區名的代碼表示法.第2部分:國家地區代碼 |
(Codes for the representation of names of countries and their subdivisions - Part 2: Country subdivision code) |
| ISO 3166-3-1999 |
國家及其地區名的代碼表示法.第3部分:國家曾用名代碼 |
(Codes for the representation of names of countries and their subdivisions - Part 3: Code for formerly used names of countries) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com