標準號 |
中文名稱 |
英文名稱 |
| ISO 11130-1999 |
金屬和合金的腐蝕.鹽溶液中的交替浸入試驗 |
(Corrosion of metals and alloys - Alternate immersion test in salt solution) |
| ISO 11131-1992 |
銀行和有關金融業務.簽字鑒定 |
(Banking and related financial services; sign-on authentication) |
| ISO 11134-1994 |
衛生防疫用品的消毒.批準和控制程序.工業濕熱的消毒 |
(Sterilization of health care products; requirements for validation and routine control; industrial moist heat sterilization) |
| ISO 11135 Technical Corrigendum 1-1994 |
醫療設備.用環氧乙烷消毒的批準和控制程序.工業濕熱的消毒.技術勘誤表1 |
(Medical devices - Validation and routine control of ethylene oxide sterilization; Technical Corrigendum 1) |
| ISO 11135-1994 |
醫療設備.用環氧乙烷消毒的批準和控制程序.工業濕熱的消毒. |
(Medical devices; validation and routine control of ethylene oxide sterilization) |
| ISO 11137 AMD 1-2001 |
醫療保健產品的滅菌.確認和常規控制要求.輻射滅菌.劑量設定條件的選擇 |
(Sterilization of health care products - Requirements for validation and routine control - Radiation sterilization; Amendment 1: Selection of terms for dose setting) |
| ISO 11137 Technical Corrigendum 1-1997 |
護理制品的滅菌.證實和過程控制要求.輻射滅菌.技術勘誤表1 |
(Sterilization of health care products - Requirements for validation and routine control - Radiation sterilization; Technical Corrigendum 1) |
| ISO 11137-1995 |
衛生管理制品的滅菌.批準和常規控制的要求.輻射滅菌 |
(Sterilization of health care products - Requirements for validation and routine control - Radiation sterilization) |
| ISO 11138-1-1994 |
保健產品的消毒.生物指示劑.第1部分:通則 |
(Sterilization of health care products - Biological indicators - Part 1: General) |
| ISO 11138-2-1994 |
保健產品的消毒.生物指示劑.第2部分:環氧乙烷滅菌用生物指示劑 |
(Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization) |
| ISO 11138-3-1995 |
保健產品的滅菌.生物指示劑.第3部分:加熱水蒸氣滅菌用生物指示劑 |
(Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization) |
| ISO 1114-1977 |
可可豆.切割試驗 |
(Cocoa beans; Cut test) |
| ISO 11140-1 AMD 1-1998 |
衛生保健產品的滅菌.化學指示劑.第1部分:一般要求.修改件1 |
(Sterilization of health care products - Chemical indicators - Part 1: General requirements; Amendment 1) |
| ISO 11140-1-1995 |
衛生保健產品的滅菌.化學指示劑.第1部分:一般要求 |
(Sterilization of health care products - Chemical indicators - Part 1: General requirements) |
| ISO 11140-2-1998 |
衛生保健產品的滅菌.化學指示劑.第2部分:試樣設備和方法 |
(Sterilization of health care products - Chemical indicators - Part 2: Test equipment and methods) |
| ISO 11140-3-2000 |
衛生保健產品的滅菌.化學指示器.第3部分:蒸氣滲透試驗薄板材用2級指示器 |
(Sterilization of health care products - Chemical indicators- Part 3: Class 2 indicators for steam penetration test sheets) |
| ISO 11140-4-2001 |
保健產品的滅菌.化學指示劑.第4部分:蒸氣滲透試驗包裝件用化學指示劑 |
(Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators for steam penetration test packs) |
| ISO 11140-5-2000 |
衛生保健產品的滅菌.化學指示器.第5部分:氣體消除試驗薄板和包裝用2級指示器 |
(Sterilization of health care products - Chemical indicators - Part 5: Class 2 indicators for air removal test sheets and packs) |
| ISO 11143 Technical Corrigendum 1-2002 |
牙科設備.汞齊合金分離器.技術勘誤1 |
(Dental equipment - Amalgam separators; Technical Corrigendum 1) |
| ISO 11143-1999 |
牙科設備.汞齊合金分離器 |
(Dental equipment - Amalgam separators) |
| ISO 11144-1995 |
牙科設備.漱口沖洗牙用給排水管接頭 |
(Dental equipment - Connections for supply and waste lines) |
| ISO 11145-2001 |
光學和光學儀器.激光和有關的激光設備的詞匯和符號 |
(Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols) |
| ISO 11146-1999 |
激光和激光相關設備.激光束參數的試驗方法.束寬、分散角度和束比例因子 |
(Laser and laser-related equipment - Test methods for laser beam parameters - Beam widths, divergence angle and beam propagation factor) |
| ISO 11149-1997 |
光學和光學儀器.激光及相關激光設備.非電信激光設備用光纖連接器 |
(Optics and optical instruments - Lasers and laser-related equipment - Fibre optic connectors for non-telecommunication laser applications) |
| ISO 11151-1-2000 |
激光和激光相關設備.標準光學部件.第1部分:紫外線、可見的和近紅外線光譜范圍用部件 |
(Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges) |
| ISO 11151-2-2000 |
激光和激光相關設備.標準光學部件.第2部分:紅外線光譜范圍用部件 |
(Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range) |
| ISO 11154-1-1995 |
道路車輛.車頂負荷量.第1部分:車頂桿 |
(Road vehicles - Roof load carriers - Part 1: Roof bars) |
| ISO 11154-4-2004 |
道路車輛.車頂載物架.第4部分:磁性固定裝置 |
|
| ISO 11157-1999 |
道路車輛.制動片組件.慣性測力計試驗方法 |
(Road vehicles - Brake lining assemblies - Inertia dynamometer test method) |
| ISO 11158-1997 |
潤滑劑,工業油和相關產品(L類).H族(液壓設備).HH,HL,HM,HR,HG和HV類規范 |
(Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HR, HV and HG) |
| ISO 1116-1999 |
縮微復制品.16mm和35mm縮微膠片.卷軸和片盤.規范 |
(Micrographics - 16 mm and 35 mm microfilm spools and reels - Specifications) |
| ISO 11161-1994 |
工業自動化系統.集成制造系統的安全.基本要求 |
(Industrial automation systems; safety of integrated manufacturing systems; basic requirements) |
| ISO 11162-2001 |
鹽水中干胡椒.規范和試驗方法 |
(Peppercorns (Piper nigrum L.) in brine - Specification and test methods) |
| ISO 11163-1995 |
干甜羅勒屬植物(香料)規范 |
(Dried sweet basil (Ocimum basilicum L.) - Specification) |
| ISO 11165-1995 |
干制鼠尾草規范 |
(Dried sage (Salvia officinalis L.) - Specification) |
| ISO 11168-1995 |
火花塞和熱線點火塞用管套扳手 |
(Socket wrenches for spark- and glow-plugs) |
| ISO 11169-1993 |
林業機械.輪式專用機器.詞匯、性能試驗方法和制動系統規則 |
(Machinery for forestry; wheeled special machines; vocabulary, performance test methods and criteria for brake systems) |
| ISO 11170-2003 |
液壓傳動.濾芯.性能特性檢驗的試驗序列 |
(Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics) |
| ISO 11170-2003 |
液壓傳動.濾芯.性能特性檢驗的試驗序列 |
|
| ISO 11171 Technical Corrigendum 1-2001 |
液力傳動.液體自動粒子計數器的校正.技術勘誤1 |
(Hydraulic fluid power - Calibration of automatic particle counters for liquids; Technical Corrigendum 1) |
| ISO 11171-1999 |
液壓傳動.液體自動粒子計數器的校正 |
(Hydraulic fluid power - Calibration of automatic particle counters for liquids) |
| ISO 11173-1994 |
熱塑性塑料管.抗外置增壓強度的測定.樓梯法 |
(Thermoplastics pipes - Determination of resistance to external blows - Staircase method) |
| ISO 11174-1996 |
工作地點空氣.用燃燒和電熱原子吸收光譜測定法對鎘離子和鎘化合物的測定 |
(Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electrothermal atomic absorption spectrometric method) |
| ISO 11178-1995 |
八角大茴香規范 |
(Star anise (Illicium verum Hook. f.) - Specification) |
| ISO 1118-1978 |
鋁和鋁合金.鈦含量的測定.鉻變酸分光光度法 |
(Aluminium and aluminium alloys; Determination of titanium; Spectrophotometric chromotropic acid method) |
| ISO 11180-1993 |
郵遞地址 |
(Postal addressing) |
| ISO 1119-1998 |
產品幾何量技術規范(GPS).錐度和錐度角系列 |
(Geometrical Product Specifications (GPS) - Series of conical tapers and taper angles) |
| ISO 11191-1997 |
儲氣瓶.儲氣瓶閥門連接用25E錐形螺紋.檢查儀表 |
(Gas cylinders - 25E taper thread for connection of valves to gas cylinders - Inspection gauges) |
| ISO 11193-1-2002 |
一次性醫用檢驗手套.第1部分:用橡膠乳和膠液制成的手套規范 |
(Single-use medical examination gloves - Part 1: Specification for gloves made from rubber latex or rubber solution) |
| ISO 11195-1995 |
醫療用氣體混合裝置.獨立氣體混合裝置 |
(Gas mixers for medical use - Stand-alone gas mixers) |
| ISO 11196 Technical Corrigendum 1-1997 |
麻醉氣體檢測器.技術勘誤表1 |
(Anaesthetic gas monitors; Technical Corrigendum 1) |
| ISO 11196-1995 |
麻醉氣體檢測器 |
(Anaesthetic gas monitors) |
| ISO 11197-1996 |
電氣醫療設備.醫用供電裝置的特殊要求 |
(Medical electrical equipment - Particular requirements for safety of medical supply units) |
| ISO 11197-2004 |
醫用配供裝置 |
|
| ISO 11199-1-1999 |
雙臂操作的助步器,要求和試驗方法.第1部分:步行支架 |
(Walking aids manipulated by both arms - Requirements and test methods - Part 1: Walking frames) |
| ISO 11199-2-1999 |
雙臂操作的助步器,要求和試驗方法.第2部分:滾動器 |
(Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators) |
| ISO 1120-2002 |
輸送機皮帶.機械緊固件的強度測定.靜態試驗法 |
(Conveyor belts - Determination of strength of mechanical fastenings - Static test method) |
| ISO 11200 Technical Corrigendum 1-1997 |
聲學.機械和設備發出的噪聲.工作站和其他特定位置發射的聲壓級測定用基本標準的使用指南.技術勘誤表1 |
(Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions; Technical Corrigendum 1) |
| ISO 11200-1995 |
聲學.機械和設備發出的噪聲.在工作站和其他特定位置發射聲壓級測定的基本標準使用導則 |
(Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions) |
| ISO 11201 Technical Corrigendum 1-1997 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所聲壓級的測量.反射平面上基本自由聲波場的工程測試 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane; Technical Corrigendum 1) |
| ISO 11201-1995 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所聲壓級的測量.反射平面上基本自由聲波場的工程測試 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane) |
| ISO 11202-1995 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所聲壓級的測量.調查法 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ) |
| ISO 11203-1995 |
聲學.機械裝置及設備發出的噪聲.在工作地點和其它試驗場所從聲功率級測量聲壓級 |
(Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level) |
| ISO 11204 Technical Corrigendum 1-1997 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所聲壓級的測量.測試要求環境條件的改變.技術勘誤表1 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections; Technical Corrigendum 1) |
| ISO 11204-1995 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所聲壓級的測量.測試要求環境條件的改變 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections) |
| ISO 11205-2003 |
聲學.機械和設備發射的噪聲.利用聲強現場測定工作位置和其他指定位置發射聲壓級的工程法 |
|
| ISO 11210-1995 |
在鉑飾用合金中鉑含量測定.六氯鉑酸二銨沉淀后測定重量 |
(Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate) |
| ISO 11212-1-1997 |
淀粉和淀粉制品.重金屬含量.第1部分:原子吸收光譜法測定砷含量 |
(Starch and derived products - Heavy metals content - Part 1: Determination of arsenic content by atomic absorption spectrometry) |
| ISO 11212-2-1997 |
淀粉和淀粉制品.重金屬含量.第2部分:原子吸收光譜法測定汞含量 |
(Starch and derived products - Heavy metals content - Part 2: Determination of mercury content by atomic absorption spectrometry) |
| ISO 11212-3-1997 |
淀粉和淀粉制品.重金屬含量.第3部分:電熱原子化原子吸收光譜法測定鉛含量 |
(Starch and derived products - Heavy metals content - Part 3: Determination of lead content by atomic absorption spectrometry with electrothermal atomization) |
| ISO 11212-4 Technical Corrigendum 1-1997 |
淀粉和淀粉制品.重金屬含量.第4部分:電熱原子化原子吸收光譜法測定鎘含量.技術勘誤表1 |
(Starch and derived products - Heavy metals content - Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization; Technical Corrigendum 1) |
| ISO 11212-4-1997 |
淀粉和淀粉制品.重金屬含量.第4部分:電熱原子化原子吸收光譜法測定鎘含量 |
(Starch and derived products - Heavy metals content - Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization) |
| ISO 11213-1995 |
淀粉和淀粉制品的檢驗.用酶催化法測定淀粉的乙�；暮� |
(Modified starch - Determination of acetyl content - Enzymatic method) |
| ISO 11214-1996 |
改進的淀粉.氧化淀粉中羥基團含量的測定 |
(Modified starch - Determination of carboxyl group content of oxidized starch) |
| ISO 11215-1998 |
改良淀粉.乙酰二淀粉己二酸酯中己二酸含量的測定.氣相色譜法 |
(Modified starch - Determination of adipic acid content of acetylated di-starch adipates - Gas-chromatographic method) |
| ISO 11216-1998 |
改良淀粉.羧甲基淀粉中羧甲基團含量的測定 |
(Modified starch - Determination of content of carboxymethyl groups in carboxymethyl starch) |
| ISO 11217-1993 |
航空航天.液壓系列液體污染物.取樣點定位和取樣準則 |
(Aerospace; hydraulic system fluid contamination; location of sampling points and citeria for sampling) |
| ISO 11218-1993 |
航空航天.液壓液清潔度分類 |
(Aerospace; cleanliness classification for hydraulic fluids) |
| ISO 1122-1 Technical Corrigendum 1-1999 |
齒輪術語詞匯.第1部分:幾何學上的定義.技術勘誤1 |
(Vocabulary of gear terms - Part 1: Definitions related to geometry; Technical Corrigendum 1) |
| ISO 1122-1-1998 |
齒輪術語詞匯.第1部分:幾何學上的定義 |
(Vocabulary of gear terms - Part 1: Definitions related to geometry) |
| ISO 1122-2-1999 |
齒輪術語詞匯.第2部分:與蝸輪齒輪幾何特性有關的定義 |
(Vocabulary of gear terms - Part 2: Definitions related to worm gear geometry) |
| ISO 11222-2002 |
空氣質量.空氣質量測量的時間平均值不確定性的測定 |
(Air quality - Determination of the uncertainty of the time average of air quality measurements) |
| ISO 11223-1-1995 |
石油和液態石油產品.直接靜態測量.直立水箱儲存的含量.第1部分:液壓油罐中量油的質量測量 |
(Petroleum and liquid petroleum products - Direct static measurements - Contents of vertical storage tanks - Part 1: Mass measurement by hydrostatic tank gauging) |
| ISO 11223-2004 |
石油和液態石油產品.直接靜態測量.通過靜壓油罐計量測量立式貯罐容量 |
|
| ISO 11224-2003 |
紡織品.非織造布成網及粘合.詞匯 |
(Textiles - Web formation and bondingin nonwovens - Vocabulary ) |
| ISO 11224-2003 |
紡織品.非織造布成網及粘合.詞匯 |
|
| ISO 11226-2000 |
人類工效學.靜態工作姿勢的評定 |
(Ergonomics - Evaluation of static working postures) |
| ISO 11228-1-2003 |
人類工效學.人工搬運.第1部分:提升和運送 |
(Ergonomics - Manual handling - Part 1: Lifting and carrying) |
| ISO 11228-1-2003 |
人類工效學.人工搬運.第1部分:提升和運送 |
|
| ISO 11234-1995 |
橡膠化合物配料.粒狀炭黑.塵埃含量的測定 |
(Rubber compounding ingredients - Carbon black (pelletized) - Determination of dust content) |
| ISO 11235-1999 |
橡膠化合物配料.亞磺酰胺催速劑.試驗方法 |
(Rubber compounding ingredients - Sulfenamide accelerators - Test methods) |
| ISO 11236-2000 |
橡膠復合成份..苯二胺抗降解劑.試驗方法 |
(Rubber compounding ingredients - p-Phenylenediamine (PPD) antidegradants - Test methods) |
| ISO 11237-1-2004 |
橡膠軟管和軟管組件.用于液壓系統的金屬絲編織增強壓實型軟管和軟管組件.規范.第1部分:用于油基液體 |
|
| ISO 1124-1988 |
橡膠配方配合劑.炭黑.裝運取樣規程 |
(Rubber compounding ingredients; carbon black shipment sampling procedures) |
| ISO 11241-1994 |
飛機.航空發動機運輸裝置 |
(Aircraft - Aircraft engine transport devices) |
| ISO 11242-1996 |
飛行器.貨運集裝箱等壓要求 |
(Aircraft - Pressure equalization requirements for cargo containers) |
| ISO 11243-1994 |
自行車.自行車用行李架.概念、分類和試驗 |
(Cycles - Luggage carriers for bicycles - Concepts, classification and testing) |
| ISO 11244-1998 |
牙科用釬焊包埋料 |
(Dental brazing investments) |
| ISO 11245-1999 |
牙齒修復.磷酸鹽粘結耐火模鑄材料 |
(Dental restorations - Phosphate-bonded refractory die materials) |
| ISO 11246-1996 |
牙科硅酸乙脂粘接鑄造包埋料 |
(Dental ethyl silicate bonded casting investments) |
| ISO 11248-1993 |
塑料.熱固模塑材料.高溫下短期特性的評定 |
(Plastics; thermosetting moulding materials; evaluation of short-term performance at elevated temperatures) |
| ISO 1125-1999 |
橡膠配方配合劑.炭黑.灰份含量的測定 |
(Rubber compounding ingredients - Carbon black - Determination of ash) |
| ISO 11252-1993 |
激光和激光相關設備.激光裝置.對文件的最低要求 |
(Lasers and laser-related equipment; laser device; minimum requirements for documentation) |
| ISO 11252-2004 |
激光和激光設備.激光裝置.對文件的最低要求 |
|
| ISO 11252-2004 |
激光和激光設備.激光裝置.對文件的最低要求 |
|
| ISO 11253-1993 |
激光和激光相關設備.激光裝置.機械接口 |
(Lasers and laser related equipment; laser device; mechanical interfaces) |
| ISO 11254-1-2000 |
激光和激光相關設備.激光表面激光誘導損傷閾的測定.第1部分:1-on-1試驗 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test) |
| ISO 11254-2-2001 |
激光和激光相關設備.光學表面激光誘導損傷閾的測定.第2部分:S-on-1試驗 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test) |
| ISO 11256-1998 |
鐵礦丸.氣體轉化直接還原用原料團的測定 |
(Iron ore pellets - Determination of clustering of feedstock for direct reduction by gas reforming processes) |
| ISO 11257-1998 |
鐵礦石.氣體轉化直接還原法測定原料的衰變和礦化 |
(Iron ores - Determination of disintegration and metallization of feedstock for direct reduction by gas reforming processes) |
| ISO 11258-1999 |
鐵礦石.通過氣體重新成型加工直接還原的飼喂托盤的還原性和金屬噴鍍性的測定 |
(Iron ores - Determination of reducibility and metallization of feedstock for direct reduction by gas reforming processes) |
| ISO 11259-1998 |
土壤質量.土壤的簡單說明 |
(Soil quality - Simplified soil description) |
| ISO 1126-1992 |
橡膠混合物成分.炭黑.加熱損失的測定 |
(Rubber compounding ingredients; carbon black; determination of loss on heating) |
| ISO 11260 Technical Corrigendum 1-1996 |
土壤質量.用鋇氯溶液測定有效陽離子交換能力和基本飽和水平.技術勘誤表1 |
(Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution; Technical Corrigendum 1) |
| ISO 11260-1994 |
土壤質量.用鋇氯溶液測定有效陽離子交換能力和基本飽和水平 |
(Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution) |
| ISO 11261-1995 |
土壤質量.氮的總含量測定.基爾達斯法 |
(Soil quality - Determination of total nitrogen - Modified Kjeldahl method) |
| ISO 11262-2003 |
土壤質量.氰化物的測定 |
(Soil quality - Determination of cyanide) |
| ISO 11262-2003 |
土壤質量.氰化物的測定 |
|
| ISO 11263-1994 |
土壤質量.磷的測定.在碳酸氫鈉溶液中可溶磷的光譜測定 |
(Soil quality - Determination of phosphorus - Spectrometric determination of phosphorus soluble in sodium hydrogen carbonate solution) |
| ISO 11265 Technical Corrigendum 1-1996 |
土壤.電導性比率的測定.技術勘誤1 |
(Soil quality - Determination of the specific electrical conductivity; Technical Corrigendum 1) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com