標準號 |
中文名稱 |
英文名稱 |
| ISO 23529-2004 |
橡膠.物理試驗方法用試件的準備和調節用一般規程 |
|
| ISO 2353-1972 |
鎂和鎂合金.含鋯、稀土、釷和銀的鎂合金中錳的測定.高碘酸鹽光度法 |
(Magnesium and its alloys; Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and silver; Periodate photometric method) |
| ISO 2354-1976 |
鎂合金.不溶性鋯的測定.茜素磺酸鹽光度法 |
(Magnesium alloys; Determination of insoluble zirconium; Alizarin sulphonate photometric method) |
| ISO 2355-1972 |
鎂和鎂合金的化學分析.稀土素含量的測定.重量分析法 |
(Chemical analysis of magnesium and its alloys; Determination of rare earths; Gravimetric method) |
| ISO 23550-2004 |
氣體燃燒器和燃?xì)庠O(shè)備的安全和控制設備.一般要求 |
|
| ISO 236-1-1976 |
手用鉸刀 |
(Hand reamers) |
| ISO 236-2-1976 |
莫氏錐柄長槽機用鉸刀 |
(Long fluted machine reamers, Morse taper shanks) |
| ISO 2360-2003 |
非磁性導電基體上非導體覆蓋層.鍍層厚度的測量.振幅靈敏性渦流法 |
(Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method ) |
| ISO 2360-2003 |
非磁性導電基體上非導體覆蓋層.鍍層厚度的測量.振幅靈敏性渦流法 |
|
| ISO 2361-1982 |
磁性和非磁性基質的鎳電鍍層.鍍層厚度的測量.磁性法 |
(Electrodeposited nickel coatings on magnetic and non-magnetic substrates; Measurement of coating thickness; Magnetic method) |
| ISO 2362-1972 |
工業用氟化鋁.氟含量的測定.威拉德-溫特爾(Willard-Winter)的改進法 |
(Aluminium fluoride for industrial use; Determination of fluorine content; Modified Willard-Winter method) |
| ISO 2363-1972 |
工業用硫酸和發煙硫酸.氮氧化物的測定.2,4-二甲苯酚分光光度法 |
(Sulphuric acid and oleums for industrial use; Determination of oxides of nitrogen; 2,4- Xylenol spectrophotometric method) |
| ISO 2364-1972 |
工業用硝酸銨.游離酸度的測定.容量法 |
(Ammonium nitrate for industrial use; Determination of free acidity; Volumetric method) |
| ISO 2365-1972 |
工業用硝酸銨.pH值的測定.電位滴定法 |
(Ammonium nitrate for industrial use; Measurement of pH value; Potentiometric method) |
| ISO 2366-1974 |
天然和人造冰晶石.鈉含量的測定.火焰發射和原子吸收分光光度法 |
(Cryolite, natural and artificial; Determination of sodium content; Flame emission and atomic absorption spectrophotometric methods) |
| ISO 2367-1972 |
天然和人造冰晶石.鋁含量的測定.8-羥基喹啉重量法 |
(Cryolite (natural and artificial); Determination of aluminium content; 8- Hydroxyquinoline gravimetric method) |
| ISO 2368-1972 |
工業用氟化鋁.鐵含量的測定.1,10-菲羅啉光度法 |
(Aluminium fluoride for industrial use; Determination of iron content; 1,10- Phenanthroline photometric method) |
| ISO 2369-1972 |
工業用氟化鋁.二氧化硅含量的測定.還原硅鉬絡合物分光光度法 |
(Aluminium fluoride for industrial use; Determination of silica content; Spectrophotometric method using the reduced silicomolybdic complex) |
| ISO 237-1975 |
直柄回轉刀具.刀柄的直徑和傳動方塊的尺寸 |
(Rotating tools with parallel shanks; Diameters of shanks and sizes of driving squares) |
| ISO 2370-1980 |
紡織品.亞麻纖維細度的測定.滲透法 |
(Textiles; Determination of fineness of flax fibres; Permeametric methods) |
| ISO 23711-2003 |
彈性密封件.灌溉和排水設施用管接頭密封件材料的要求.彈性塑料 |
(Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers ) |
| ISO 23711-2003 |
彈性密封件.灌溉和排水設施用管接頭密封件材料的要求.彈性塑料 |
|
| ISO 2374-1983 |
提升設備.基本型號的最大提升范圍 |
(Lifting appliances; Range of maximum capacities for basic models) |
| ISO 2375-1985 |
數據處理.換碼序列的登記程序 |
(Data processing; Procedure for registration of escape sequences) |
| ISO 2376-1972 |
鋁及其合金的陽極氧化.測量擊穿電壓的絕緣檢驗 |
(Anodization (anodic oxidation) of aluminium and its alloys; Insulation check by measurement of breakdown potential) |
| ISO 2377-1972 |
鎂合金砂模鑄件.參比試棒 |
(Magnesium alloy sand castings; Reference test bar) |
| ISO 2378-1972 |
鋁合金冷硬鑄件.參比試棒 |
(Aluminium alloy chill castings; Reference test bar) |
| ISO 2379-1972 |
鋁合金砂模鑄件.參比試棒 |
(Aluminium alloy sand castings; Reference test bar) |
| ISO 23794-2003 |
硫化橡膠或熱固性橡膠.磨損試驗.指南 |
|
| ISO 23794-2003 |
硫化橡膠或熱固性橡膠.磨損試驗.指南 |
|
| ISO 238-1974 |
莫氏錐柄刀具用的異徑連接套和延伸套筒 |
(Reduction sleeves and extension sockets for tools with Morse taper shanks) |
| ISO 2380-1-1997 |
螺釘和螺母用裝配工具.槽螺釘用旋具.第1部分:手工及機械操作用的旋具頭 |
(Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1: Tips for hand- and machine-operated screwdrivers) |
| ISO 2380-1-2004 |
螺釘和螺母用裝配工具.一字槽螺釘?shù)男?第1部分:手動或者機動旋具工作部 |
|
| ISO 2380-2-2000 |
螺釘和螺母用裝配工具.一字槽頭螺釘用旋具.第2部分:手工操作旋具的一般要求、刀刃長度和標記 |
(Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers) |
| ISO 2380-2-2004 |
螺釘和螺母用裝配工具.一字槽螺釘?shù)男?第2部分:手動旋具的一般要求、旋桿長度和標志 |
|
| ISO 2382-10-1979 |
數據處理詞匯.第10部分:操作技術和設施.兩種語言版 |
(Data processing; Vocabulary; Section 10: Operating techniques and facilities Bilingual edition) |
| ISO 2382-12-1988 |
信息處理系統詞匯.第12部分:外圍設備 |
(Information processing systems; Vocabulary; Part 12: Peripheral equipment) |
| ISO 2382-19-1989 |
信息處理系統詞匯.第19部分:模擬計算 |
(Information processing systems; Vocabulary; Part 19: Analog computing) |
| ISO 2382-2-1976 |
數據處理.詞匯.第2節:算術和邏輯運算.兩種語言版 |
(Data processing; Vocabulary; Section 02: Arithmetic and logic operations Bilingual edition) |
| ISO 2382-21-1985 |
數據處理詞匯.第21部分:過程控制計算機系統和技術過程之間的接口.兩種語言版 |
(Data processing; Vocabulary; Part 21: Interfaces between process computer systems and technical processes Bilingual edition) |
| ISO 2382-22-1986 |
信息處理系統詞匯.第22部分:計算器.兩種語言版 |
(Information processing systems; Vocabulary; Part 22: Calculators Bilingual edition) |
| ISO 2382-3-1987 |
信息處理系統.詞匯.第03部分:設備技術.雙語版 |
(Information processing systems; Vocabulary; Part 03: Equipment technology Bilingual edition) |
| ISO 2382-6-1987 |
信息處理系統.詞匯.第06部分:數據準備和處理.雙語版 |
(Information processing systems; Vocabulary; Part 06: Preparation and handling of data Bilingual edition) |
| ISO 2384-1977 |
文獻工作.譯本描述 |
(Documentation; Presentation of translations) |
| ISO 2385-1993 |
軟木厚板、原軟木、碎料、軟木塞、軟木廢料和廢軟木塞.水份含量測定取樣 |
(Corkwood in planks, virgin cork, cleanings, cork pieces, corkwood refuse and corkwaste; sampling to determine moisture content) |
| ISO 23853-2004 |
起重機.吊裝工和信號手的培訓 |
|
| ISO 23853-2004 |
起重機.吊裝工和信號手的培訓 |
|
| ISO 2386-1998 |
軟木厚板、軟木料、軟木栓皮、碎栓皮、軟木廢物和軟木殘渣含水量的測定 |
(Corkwood in planks, virgin cork, ramassage, gleanings, corkwood refuse and corkwaste - Determination of moisture content) |
| ISO 239-1999 |
鉆頭夾盤錐度 |
(Drill chuck tapers) |
| ISO 2393-1994 |
橡膠試驗混合料.制備、混合和硫化.設備和程序 |
(Rubber test mixes - Preparation, mixing and vulcanization - Equipment and procedures) |
| ISO 2394-1998 |
結構可靠性的一般原則 |
(General principles on reliability for structures) |
| ISO 2395-1990 |
試驗用篩和篩分試驗.詞匯 |
(Test sieves and test sieving; vocabulary) |
| ISO 23950-1998 |
信息和文獻工作.信息檢索(Z39.50).應用服務定義和協議規范 |
(Information and documentation - Information retrieval (Z39.50) - Application service definition and protocol specification) |
| ISO 2398-1995 |
壓縮空氣用紡織纖維增強橡膠軟管規范 |
(Rubber hose, textile-reinforced, for compressed air - Specification) |
| ISO 240-1994 |
銑刀.銑刀桿或銑刀芯軸的互換性尺寸 |
(Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels) |
| ISO 2400-1972 |
鋼件的焊縫.超聲波探傷設備校準用標準塊 |
(Welds in steel; Reference block for the calibration of equipment for ultrasonic examination) |
| ISO 2401-1972 |
涂敷焊條.效率,金屬回收和熔敷系數的測定 |
(Covered electrodes; Determination of the efficiency, metal recovery and deposition coefficient) |
| ISO 2402-1972 |
錐孔[1:30(包括1:30)]鍵傳動的套型鉸刀及其刀桿 |
(Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers) |
| ISO 2403-1972 |
紡織品.棉纖維.馬克隆尼值的測定 |
(Textiles; Cotton fibres; Determination of micronaire value) |
| ISO 2404-1986 |
電影技術.在成條的70mm發行拷貝上的六聲跡磁性聲帶.位置和尺寸 |
(Cinematography; Six-track magnetic sound records on 70 mm striped release prints; Locations and dimensions) |
| ISO 2406-1974 |
連續機械裝卸設備.移動式和輕便式輸送機.結構規范 |
(Continuous mechanical handling equipment; Mobile and portable conveyors; Constructional specifications) |
| ISO 2407-1997 |
臥式內圓磨床的驗收條件.精度試驗 |
(Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy) |
| ISO 2408-1985 |
通用鋼絲繩.特性 |
(Steel wire ropes for general purposes; Characteristics) |
| ISO 2408-2004 |
一般用途鋼絲繩.最低要求 |
|
| ISO 2409-1992 |
色漆和清漆.交叉切割試驗 |
(Paints and varnishes; cross-cut test) |
| ISO 241-1994 |
車刀和刨刀的刀柄.斷面的類型和尺寸 |
(Shanks for turning and planing tools - Shapes and dimensions of the section) |
| ISO 2410-1973 |
家用冰箱.對用戶信息的測驗方法 |
(Household refrigerators; methods of test for the information of the consumer) |
| ISO 2411-2000 |
橡膠或塑料涂層織物.涂層粘合力的測定 |
(Rubber- or plastics-coated fabrics - Determination of coating adhesion) |
| ISO 2412-1982 |
造船.指示燈的顏色 |
(Shipbuilding; Colours of indicator lights) |
| ISO 2415-1987 |
一般提升用的鍛造鉤環.D形鉤環和弓形鉤環 |
(Forged shackles for general lifting purposes; Dee shackles and bow shackles) |
| ISO 2415-2004 |
起重用鍛造卸扣.D形弓形卸扣 |
|
| ISO 2416-1992 |
客車.載荷分布 |
(Passenger cars; mass distribution) |
| ISO 2417-2002 |
皮革.物理和機械試驗.靜態吸水性的測定 |
(Leather - Physical and mechanical tests - Determination of the static absorption of water) |
| ISO 2418-2002 |
皮革.化學、物理、機械和色牢度試驗.抽樣位置 |
(Leather - Chemical, physical and mechanical and fastness tests - Sampling location) |
| ISO 2419-2002 |
皮革.物理和機械試驗.試樣制備和狀態調節 |
(Leather - Physical and mechanical tests - Sample preparation and conditioning) |
| ISO 242-1975 |
車刀上釬焊的硬質合金刀尖 |
(Carbide tips for brazing on turning tools) |
| ISO 2420-2002 |
皮革.物理和機械試驗.表觀密度的測定 |
(Leather - Physical and mechanical tests - Determination of apparent density) |
| ISO 2421-2003 |
砂布.桶形砂套 |
(Coated abrasives - Cylindrical sleeves) |
| ISO 2421-2003 |
砂布.桶形砂套 |
|
| ISO 2423-1982 |
搖臂鉆床的驗收條件.精度試驗 |
(Acceptance conditions for radial drilling machines with the arm adjustable in height; Testing of accuracy) |
| ISO 24234-2004 |
牙科學.牙科汞齊合金用汞及合金 |
|
| ISO 24234-2004 |
牙科學.牙科汞齊合金用汞及合金 |
|
| ISO 2424-1992 |
鋪地織物.詞匯 |
(Textile floor coverings; vocabulary) |
| ISO 2425 AMD 1-2003 |
潮水河明渠水流測量.修改件1 |
(Measurement of liquid flow in open channels under tidal conditions; Amendment 1 ) |
| ISO 2425 AMD 1-2003 |
潮水河明渠水流測量.修改件1 |
|
| ISO 2425-1999 |
潮汐情況下開放渠液流的測定 |
(Measurement of liquid flow in open channels under tidal conditions) |
| ISO 2426-1-2000 |
膠合板.按表面外觀的分類.第1部分:總則 |
(Plywood - Classification by surface appearance - Part 1: General) |
| ISO 2426-2-2000 |
膠合板.按表面外觀的分類.第2部分:硬木 |
(Plywood - Classification by surface appearance - Part 2: Hardwood) |
| ISO 2426-3-2000 |
膠合板.按表面外觀的分類.第2部分:軟木 |
(Plywood - Classification by surface appearance - Part 3: Softwood) |
| ISO 243-1975 |
硬質合金刀尖的車刀.外圓車刀 |
(Turning tools with carbide tips; External tools) |
| ISO 2431 Technical Corrigendum 1-1994 |
色漆和清漆.用流量杯測定流量時間.技術勘誤1 |
(Paints and varnishes - Determination of flow time by use of flow cups; Technical Corrigendum 1) |
| ISO 2431 Technical Corrigendum 2-1999 |
涂料和清漆.用流量杯對流量時間的測定.技術勘誤2 |
(Paints and varnishes - Determination of flow time by use of flow cups; Technical Corrigendum 2) |
| ISO 2431-1993 |
色漆和清漆.用流量杯測定流動時間 |
(Paints and varnishes; determination of flow time by use of flow cups) |
| ISO 2433-1999 |
移動式工作臺的外圓和通用磨床的試驗條件.精度試驗 |
(Machine tools - Test conditions for external cylindrical and universal grinding machines with a movable table - Testing of the accuracy) |
| ISO 2434-1973 |
用于飛機上的非呼吸用壓縮空氣 |
(Compressed non-breathing air for use in aircraft) |
| ISO 2435-1973 |
用于飛機的氮氣 |
(Nitrogen for use in aircraft) |
| ISO 2436-1973 |
飛機的耐熱設備的金屬絲.試驗方法 |
(Heat-resisting equipment wires for aircraft; Methods of test) |
| ISO 2437-1972 |
厚度5-50mm的鋁及其合金和鎂及其合金熔焊對接的 X射線檢驗的推薦方法 |
(Recommended practice for the X-ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick) |
| ISO 2439 Technical Corrigendum 1-1998 |
柔性多孔聚合材料.硬度的測定(壓痕技術).技術勘誤1 |
(Flexible cellular polymeric materials - Determination of hardness (indentation technique); Technical Corrigendum 1) |
| ISO 2439-1997 |
柔性多孔聚合材料.硬度的測定(壓痕技術) |
(Flexible cellular polymeric materials - Determination of hardness (indentation technique)) |
| ISO 244-1979 |
飛機.封裝金屬絲 |
(Aircraft; Sealing wire) |
| ISO 2440-1997 |
柔性和剛性泡沫聚合材料.加速老化試驗 |
(Flexible and rigid cellular polymeric materials - Accelerated ageing tests) |
| ISO 2444-1988 |
建筑物的接縫.詞匯 |
(Joints in building; vocabulary) |
| ISO 2445-1972 |
建筑物的接縫.設計的基本原則 |
(Joints in building; Fundamental principles for design) |
| ISO 2446-1976 |
牛奶.脂肪含量的測定(常規法) |
(Milk; Determination of fat content (Routine method)) |
| ISO 2447-1998 |
水果和蔬菜制品.錫含量的測定 |
(Fruit and vegetable products - Determination of tin content) |
| ISO 2448-1998 |
水果和蔬菜制品.乙醇含量的測定 |
(Fruit and vegetable products - Determination of ethanol content) |
| ISO 2449-1974 |
牛奶及其液態制品.表面張力約為45mN/m的制品用密度比重計 |
(Milk and liquid milk products; Density hydrometers for use in products with a surface tension of approximately 45 mN/m) |
| ISO 245-1998 |
航空航天.鎖線.直徑 |
(Aerospace - Lockwire - Diameters) |
| ISO 2450-1999 |
奶油.脂肪含量的測定.重量法(參比法) |
(Cream - Determination of fat content - Gravimetric method (Reference method)) |
| ISO 2451-1973 |
可可豆.規范 |
(Cocoa beans; Specification) |
| ISO 2453 Technical Corrigendum 1-2003 |
乳聚型丁苯生膠.結合苯乙烯含量測定.折光指數法.技術勘誤1 |
(Rubber, raw styrene-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method; Technical Corrigendum 1) |
| ISO 2453 Technical Corrigendum 1-2003 |
乳聚型丁苯生膠.結合苯乙烯含量測定.折光指數法.技術勘誤1 |
|
| ISO 2453-1991 |
粗丁苯高聚物乳劑橡膠.苯乙烯含量測定.折射指數法 |
(Rubber, raw styrene-butadiene, emulsion-polymerized; determination of bound styrene content; refractive index method) |
| ISO 2454-1995 |
橡膠制品.鋅含量的測定.乙二胺四乙酸(edta)滴定法 |
(Rubber products - Determination of zinc content - EDTA titrimetric method) |
| ISO 2456-1986 |
表面活性劑.供試驗溶劑用的水.規范和試驗方法 |
(Surface active agents; Water used as a solvent for tests; Specification and test methods) |
| ISO 2457-1976 |
實心木拼花地板.水青崗條的分類 |
(Solid wood parquet; Classification of beech strips) |
| ISO 246-1995 |
滾動軸承.柱型滾子軸承、分離式止推環的外形尺寸 |
(Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions) |
| ISO 2460-1973 |
工業用碳酸氫鈉.鐵含量的測定.1,10-菲羅啉光度法 |
(Sodium hydrogen carbonate for industrial use; Determination of iron content; 1,10- Phenanthroline photometric method) |
| ISO 2461-1973 |
工業用氯酸鈉.不溶于水的物質含量的測定 |
(Sodium chlorate for industrial use; Determination of matter insoluble in water) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com