標準號 |
中文名稱 |
英文名稱 |
| ISO 15481-1999 |
帶有敲擊出螺紋的十字凹槽平頭自攻絲螺紋 |
Cross recessed pan head drilling screws with tapping screw thread |
| ISO 15482-1999 |
帶螺絲攻的十字凹槽埋頭攻絲螺絲 |
Cross recessed countersunk head drilling screws with tapping screw thread |
| ISO 15483-1999 |
帶螺絲攻的十字凹槽半埋頭攻絲螺絲 |
Cross recessed raised countersunk head drilling screws with tapping screw thread |
| ISO 15487-1999 |
紡織品.評定家洗和烘干后衣服和其它紡織品外觀的方法 |
Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying |
| ISO 15488-1996 |
刀具柄用設定有8°角的夾頭.夾頭、螺母和配件尺寸 |
Collets with 8?setting angle for tool shanks - Collets, nuts and fitting dimensions |
| ISO 15488-2003 |
刀具柄用帶8°調整角的夾頭.夾頭、螺母和配合尺寸 |
(Collets with 8?setting angle for tool shanks - Collets, nuts and fitting dimensions ) |
| ISO 15488-2003 |
刀具柄用帶8°調整角的夾頭.夾頭、螺母和配合尺寸 |
|
| ISO 15489-1-2001 |
信息和文獻.記錄文獻管理.第1部分:總則 |
Information and documentation - Records management - Part 1: General |
| ISO 1549-1976 |
飛機.精確的熔斷體.B型 |
Aircraft; Precision fuse-links; Type B |
| ISO 15490-2000 |
細陶瓷(高級陶瓷、高級工業陶瓷).室溫下單片陶瓷抗拉強度的試驗方法 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature |
| ISO 15493 Technical Corrigendum 1-2004 |
工業用塑料管道系統.丙烯腈-丁二烯-苯乙烯塑料(ABS)、未增塑的聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C).件和管道系統規范.米制系列.技術勘誤1 |
|
| ISO 15493-2003 |
工業用塑料管道系統.丙烯腈-丁二烯-苯乙烯塑料(ABS)、未增塑的聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C).件 |
(Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and piping systems; Metric series) |
| ISO 15493-2003 |
工業用塑料管道系統.丙烯腈-丁二烯-苯乙烯塑料(ABS)、未增塑的聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C).件和管道系統規范.米制系列 |
|
| ISO 15494-2003 |
工業用塑料管道系統.聚丁烯(PE)聚乙烯(PE)聚丙烯(PP).件和系統的規范.米制系列 |
(Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the systems; Metric series) |
| ISO 15494-2003 |
工業用塑料管道系統.聚丁烯(PE)聚乙烯(PE)聚丙烯(PP).件和系統的規范.米制系列 |
|
| ISO 15496-2004 |
織物.質量控制用織物的水蒸氣滲透率測量 |
|
| ISO 155-1998 |
皮帶傳動.皮帶輪.中心調整極限值 |
Belt drives - Pulleys - Limiting values for adjustment of centres |
| ISO 1550-1973 |
工業用氫氧化鉀.鈉含量的測定.火焰發射分光光度法 |
Potassium hydroxide for industrial use; Determination of sodium content; Flame emission spectrophotometric method |
| ISO 15500-1 AMD 1-2003 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第1部分:一般要求和定義.修改1 |
(Road vehicles - Compressed natural gas (CNG) fuel system components - Part 1: General requirements and definitions; Amendment A1) |
| ISO 15500-1 AMD 1-2003 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第1部分:一般要求和定義.修改1 |
|
| ISO 15500-1-2000 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第1部分:一般要求和定義 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 1: General requirements and definitions |
| ISO 15500-10-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第10部分:氣流調節器 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 10: Gas-flow adjuster |
| ISO 15500-11-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第11部分:燃?xì)?空氣混合器 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 11: Gas/air mixer |
| ISO 15500-12-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第12部分:減壓閥 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 12: Pressure relief valve (PRV) |
| ISO 15500-13-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第13部分:壓力釋放裝置 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 13: Pressure relief device (PRD) |
| ISO 15500-14-2002 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第14部分:溢流閥 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 14: Excess flow valve |
| ISO 15500-15-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第15部分:氣密罩和通風軟管 |
(Road vehicles - Compressed natural gas (CNG) fuel system components - Part 15: Gas-tight housing and ventilation hose) |
| ISO 15500-16-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第16部分:剛性燃料線路 |
(Road vehicles - Compressed natural gas (CNG) fuel system components - Part 16: Rigid fuel line) |
| ISO 15500-17-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第17部分:撓性燃料線路 |
(Road vehicles - Compressed natural gas (CNG) fuel system components - Part 17: Flexible fuel line) |
| ISO 15500-18-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第18部分:過濾器 |
(Road vehicles - Compressed natural gas (CNG) fuel system components - Part 18: Filter) |
| ISO 15500-19-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第19部分:配件 |
(Road vehicles - Compressed natural gas (CNG) fuel system components - Part 19: Fittings) |
| ISO 15500-2-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第2部分:性能和一般試驗方法 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 2: Performance and general test methods |
| ISO 15500-3-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第3部分:止回閥 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 3: Check valve |
| ISO 15500-4-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第4部分:手動閥 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 4: Manual valve |
| ISO 15500-5-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第5部分:手動汽閥 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 5: Manual cylinder valve |
| ISO 15500-6-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第6部分:自動閥門 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 6: Automatic valve |
| ISO 15500-7-2002 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第7部分:氣體噴射器 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 7: Gas injector |
| ISO 15500-8-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第8部分:壓力指示器 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 8: Pressure indicator |
| ISO 15500-9-2001 |
道路車輛.壓縮天然氣(CNG)燃料系統部件.第9部分:壓力調節器 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Part 9: Pressure regulator |
| ISO 15501-1-2001 |
道路車輛.壓縮天然氣燃料系統.第1部分:安全要求 |
Road vehicles - Compressed natural gas (CNG) fuel systems - Part 1: Safety requirements |
| ISO 15509-2001 |
粘結性.工程塑料接頭粘結強度的測定 |
Adhesives - Determination of the bond strength of engineering-plastic joints |
| ISO 15511-2003 |
信息和文獻工作.圖書館和相關組織用國際標準識別符(ISIL) |
|
| ISO 15512-1999 |
塑料.水含量的測定 |
Plastics - Determination of water content |
| ISO 15513-2000 |
起重機.起重機司機(操縱者)、吊裝工、信號員和助手的資格要求 |
Cranes - Competency requirements for crane drivers (operators), slingers, signallers and assessors |
| ISO 15517-2003 |
煙草.硝酸鹽含量的測定.連續流分析法 |
(Tobacco - Determination of nitrate content - Continuous-flow analysis method) |
| ISO 15517-2003 |
煙草.硝酸鹽含量的測定.連續流分析法 |
|
| ISO 1552-1976 |
工業用液態氯.取樣方法[只限于測定氯含量(體積)] |
Liquid chlorine for industrial use; Method of sampling (for determining only the volumetric chlorine content) |
| ISO 15522-1999 |
水質.活動性污水微生物增長水流動抑制效果的測定 |
Water quality - Determination of the inhibitory effect of water constituents on the growth of activated sludge microorganisms |
| ISO 15526-1-2000 |
塑料.聚酮(PK)模塑和擠塑材料.第1部分:名稱與符號系統和規范基礎 |
Plastics - Polyketone (PK) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
| ISO 15526-2-2000 |
塑料.聚酮(PK)模塑和擠塑材料.第2部分:試樣的制備和特性的測定 |
Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
| ISO 15528-2000 |
涂料和清漆用涂料、清漆和原材料.取樣 |
Paints, varnishes and raw materials for paints and varnishes - Sampling |
| ISO 15529-1999 |
光學和光學儀器.透光功能.樣品成像系統調整透光功能(MTF)的測量規則 |
Optics and optical instruments - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems |
| ISO 15529-1999 |
光學和光學儀器.透光功能.樣品成像系統調整透光功能(MTF)的測量規則 |
Optics and optical instruments - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems |
| ISO 1553-1976 |
含銅不小于99.90%的非合金銅.銅含量的測定.電解法 |
Unalloyed copper containing not less than 99,90 % of copper; Determination of copper content; Electrolytic method |
| ISO 15531-1-2004 |
工業自動化系統和集成.工業生產管理數據.第1部分:總攬 |
|
| ISO 15531-31-2004 |
工業自動化系統和集成.工業生產管理數據.第31部分:資源信息模型 |
|
| ISO 15534-1-2000 |
機械安全的人類工效學設計.第1部分:進入機械的入孔開口所要求的尺寸測定的規則 |
Ergonomic design for the safety of machinery - Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery |
| ISO 15534-2-2000 |
機械安全的人類工效學設計.第2部分:入孔開口所要求的尺寸測定的規則 |
Ergonomic design for the safety of machinery - Part 2: Principles for determining the dimensions required for access openings |
| ISO 15534-3-2000 |
機械安全的人類工效學設計.第3部分:人體測量學的數據 |
Ergonomic design for the safety of machinery - Part 3: Anthropometric data |
| ISO 15535-2003 |
建立人體測量數據庫的一般要求 |
(General requirements for establishing anthropometric database) |
| ISO 15535-2003 |
建立人體測量數據庫的一般要求 |
|
| ISO 15537-2004 |
工業產品和設計的人體測量方面用試驗人員的選擇和使用原則 |
|
| ISO 15538-2001 |
消防員用的防護服裝.有反射性外表面的防護服裝的實驗室試驗方法和性能要求 |
Protective clothing for firefighters - Laboratory test methods and performance requirements for protective clothing with a reflective outer surface |
| ISO 1554-1976 |
鍛銅合金和鑄銅合金.銅含量的測定.電解法 |
Wrought and cast copper alloys; Determination of copper content; Electrolytic method |
| ISO 15540 Technical Corrigendum 1-1999 |
造船和航海技術,軟管組件的抗燃性.試驗方法.技術勘誤1 |
Ships and marine technology - Fire resistance of hose assemblies - Test methods; Technical Corrigendum 1 |
| ISO 15540-1999 |
船舶和造船技術,軟管組件的抗燃性.試驗方法 |
Ships and marine technology - Fire resistance of hose assemblies - Test methods |
| ISO 15541-1999 |
船舶和造船技術,軟管組件的抗燃性.試驗板的要求 |
Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench |
| ISO 15544-2000 |
石油和天然氣工業.海上生產裝置.緊急響應要求和導則 |
Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response |
| ISO 15546-2002 |
石油和天然氣工業.鋁合金鉆桿 |
(Petroleum and natural gas industries - Aluminium alloy drill pipe) |
| ISO 15547-2000 |
石油和天然氣工業.板式熱交換器 |
(Petroleum and natural gas industries - Plate heat exchangers) |
| ISO 15550-2002 |
內燃機.發動機功率的測量和檢測方法.一般要求 |
(Internal combustion engines - Determination and method for the measurement of engine power - General requirements) |
| ISO 15552-2004 |
氣壓傳動.具有可拆卸安裝件的、1000kPa(10 bar)系列、孔徑為32mm至320mm的氣缸.基礎尺寸、安裝尺寸和附件尺寸 |
|
| ISO 15552-2004 |
氣壓傳動.具有可拆卸安裝件的、1000kPa(10 bar)系列、孔徑為32mm至320mm的氣缸.基礎尺寸、安裝尺寸和附件尺寸 |
|
| ISO 15579-2000 |
金屬材料.低溫抗拉試驗 |
(Metallic materials - Tensile testing at low temperature) |
| ISO 15584-2001 |
小型船舶.船內汽油發動機.安裝發動機的燃料和電氣件 |
(Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components) |
| ISO 15586-2003 |
水質.用石墨爐原子吸收光譜法測定痕量素 |
|
| ISO 15587-1-2002 |
水質.測定水中所選素的發酵作用.第1部分:王水發酵作用 |
(Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion) |
| ISO 15587-2-2002 |
水質.測定水中所選素的發酵作用.第2部分:硝酸發酵作用 |
(Water quality - Digestion for the determination of selected elements in water - Part 2: Nitric acid digestion) |
| ISO 15589-1-2003 |
石油和天然氣工業.管道運輸系統的陰極保護.第1部分:陸地管線 |
(Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems - Part 1: On-land pipelines) |
| ISO 15589-1-2003 |
石油和天然氣工業.管道運輸系統的陰極保護.第1部分:陸地管線 |
|
| ISO 15589-2-2004 |
石油和天然氣工業.管道運輸系統的陰極保護.第2部分:海上管線 |
|
| ISO 1559 Technical Corrigendum 1-1997 |
牙科材料.牙用汞齊合金.技術勘誤1 |
(Dental materials - Alloys for dental amalgam; Technical Corrigendum 1) |
| ISO 1559-1995 |
牙科材料.牙用汞齊合金 |
(Dental materials - Alloys for dental amalgam) |
| ISO 15590-1-2001 |
石油和天然氣工業.管道運輸系統用感應彎頭、配件和法蘭.第1部分:感應彎頭 |
(Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends) |
| ISO 15590-2-2003 |
石油和天然氣工業.管道輸送系統用進氣彎管、管件和法蘭.第2部分:管件 |
|
| ISO 15590-2-2003 |
石油和天然氣工業.管道輸送系統用進氣彎管、管件和法蘭.第2部分:管件 |
|
| ISO 15590-3-2004 |
石油和天然氣工業.管道輸送系統用進氣彎頭、管件和法蘭.第3部分:法蘭 |
|
| ISO 15592-1-2001 |
細切煙草及其煙制品.抽樣、調節和分析方法.第1部分:抽樣 |
(Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 1: Sampling) |
| ISO 15592-2-2001 |
細切煙草及其煙制品.抽樣、調節和分析方法.第2部分:調節和試驗大氣 |
(Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 2: Atmosphere for conditioning and testing) |
| ISO 15592-3-2003 |
細切煙草及其煙制品.抽樣、調節和分析方法.第3部分:用常規分析吸煙機測定煙制品中顆粒物質總量、水和煙堿測 |
(Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of w |
| ISO 15592-3-2003 |
細切煙草及其煙制品.抽樣、調節和分析方法.第3部分:用常規分析吸煙機測定煙制品中顆粒物質總量、水和煙堿測定的準備和無煙堿干燥顆粒物質的計算 |
|
| ISO 15593-2001 |
環境煙草煙霧.可呼吸懸浮顆粒的評價.通過熒光和超揮發吸收測定顆粒物質 |
(Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence) |
| ISO 15597-2001 |
石油和有關產品.氯和溴含量的測定.波長散射X射線熒光光譜法 |
(Petroleum and related products - Determination of chlorine and bromine content - Wavelength-dispersive X-ray fluorescence spectrometry) |
| ISO 15598-1999 |
茶葉.粗纖維含量的測定 |
(Tea - Determination of crude fibre content) |
| ISO 1560-1985 |
牙科用汞 |
(Dental mercury) |
| ISO 15600-2000 |
模具.注塑模用隔熱板 |
(Tools for moulding - Thermal insulating sheets for injection moulds) |
| ISO 15601-2000 |
錘子.鋼錘頭技術規范.試驗程序 |
(Hammers - Technical specifications concerning steel hammer heads - Test procedures) |
| ISO 15605-2000 |
膠粘劑.取樣 |
(Adhesives - Sampling) |
| ISO 15606-1999 |
牙鉆手柄.氣動刮器和刮器梢尖 |
(Dental handpieces - Air-powered scalers and scaler tips) |
| ISO 15607-2003 |
金屬材料焊接程序規范和合格鑒定.總則 |
|
| ISO 15609-1-2004 |
金屬材料的焊接程序規范和鑒定.焊接程序規范.第1部分:弧焊 |
|
| ISO 15609-2-2001 |
金屬焊接程序的規范和合格評定.焊接程序規范.第2部分:氣焊 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding) |
| ISO 15609-3-2004 |
金屬材料的焊接程序規范和鑒定.焊接程序規范.第3部分:電子束焊 |
|
| ISO 15609-4-2004 |
金屬材料的焊接程序規范和鑒定.焊接程序規范.第4部分:激光束焊接 |
|
| ISO 15609-5-2004 |
金屬材料焊接程序的規范和鑒定.焊接程序規范.第5部分:電阻焊接 |
|
| ISO 1561-1995 |
牙科嵌入鑄蠟嵌體 |
(Dental casting wax) |
| ISO 15610-2003 |
金屬材料焊接程序規范和合格鑒定.基于試驗焊接消耗品的合格鑒定 |
|
| ISO 15611-2003 |
金屬材料焊接程序規范和合格鑒定.根據已有焊接經驗進行合格鑒定 |
|
| ISO 15612-2004 |
金屬材料的焊接程序規范和鑒定.通過標準焊接程序的采用進行合格鑒定 |
|
| ISO 15613-2004 |
金屬材料的焊接程序規范和鑒定.基于預生產焊接試驗的鑒定 |
|
| ISO 15614-1-2004 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.第1部分:鋼的電弧焊和氣焊及鎳和鎳合金的電弧焊 |
|
| ISO 15614-11-2002 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.第11部分:電子和激光束焊接 |
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding |
| ISO 15614-12-2004 |
金屬材料焊接程序的規范和鑒定.焊接過程試驗.第12部分:點焊、縫焊和凸焊 |
|
| ISO 15614-5-2004 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.第5部分:鈦、鋯及其合金的電弧焊 |
|
| ISO 15614-8-2002 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.第8部分:管對管板接頭焊接 |
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints |
| ISO 15616-1-2003 |
高質量焊接和切割用CO2激光射線機的驗收試驗.第1部分:通用原理和驗收條件 |
Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions |
| ISO 15616-1-2003 |
高質量焊接和切割用CO2激光射線機的驗收試驗.第1部分:通用原理和驗收條件 |
|
| ISO 15616-2-2003 |
高質量焊接和切割用CO2激光射線機的驗收試驗.第2部分:靜態和動態準確度的測定 |
Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy |
| ISO 15616-2-2003 |
高質量焊接和切割用CO2激光射線機的驗收試驗.第2部分:靜態和動態準確度的測定 |
|
| ISO 15616-3-2003 |
高質量焊接和切割用CO2激光射線機的驗收試驗.第3部分:氣體流量和壓力測量儀的校正 |
Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com