標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 10806-2004 |
管道工程.波紋狀金屬軟管用配件 |
|
| BS EN ISO 10807-1997 |
管道工程.在爆燃性空氣中電纜保護用皺紋軟金屬管組件 |
(Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere) |
| BS EN ISO 10819-1997 |
機械振動和沖擊.手臂振動.手套在手掌對振動可傳性的評定和測量方法 |
(Mechanical vibration and shock - Hand-arm vibration - Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand) |
| BS EN ISO 10821-2005 |
工業縫紉機械.縫紉機械、設備和系統的安全要求 |
|
| BS EN ISO 10846-1-1999 |
聲學和振動.彈性件的振動-聲傳輸特性的實驗室測量.原理和指南 |
(Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Principles and guidelines) |
| BS EN ISO 10846-2-1999 |
聲學和振動.彈性件的振動-聲傳輸特性的實驗室測量.平動用彈性支架的動態硬挺度.直接法 |
(Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Dynamic stiffness of elastic supports for translatory motion - Direct method) |
| BS EN ISO 10846-3-2002 |
聲學和振動.彈性件的振動-聲傳輸特性的實驗室測量.平動用彈性支架的動態勁度的間接測定方法 |
(Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Indirect method for determination of the dynamic stiffness of resilient supports for tran) |
| BS EN ISO 10846-4-2003 |
聲學和振動.彈性件的振動-聲傳輸特性的實驗室測量.平動用除彈性支撐外的構件的動態勁度 |
(Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Dynamic stiffness of elements other than resilient supports for translatory motion) |
| BS EN ISO 10882-1-2001 |
焊接和有關過程的健康和安全.操作者呼吸區域的氣載顆粒和氣體的取樣.氣載顆粒取樣 |
(Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator’s breathing zone - Sampling of airborne particles) |
| BS EN ISO 10882-2-2000 |
焊接及相關工藝的衛生與安全.操作人員呼吸區域內氣體及氣載顆粒的抽樣.氣體的抽樣 |
(Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator’s breathing zone - Sampling of gases) |
| BS EN ISO 10938-1998 |
眼科儀器.圖表放映機 |
(Ophthalmic instruments - Chart projectors) |
| BS EN ISO 10939-1998 |
眼科儀器.縫燈顯微鏡 |
(Ophthalmic instruments - Slit-lamp microscopes) |
| BS EN ISO 10940-1998 |
眼科儀器.眼底檢查鏡 |
(Ophthalmic instruments - Fundus cameras) |
| BS EN ISO 10942-1998 |
眼科儀器.直接眼膜曲率計 |
(Ophthalmic instruments - Direct ophthalmoscopes) |
| BS EN ISO 10943-1998 |
眼科儀器.間接眼膜曲率計 |
(Ophthalmic instruments - Indirect ophthalmoscopes) |
| BS EN ISO 10944-1998 |
眼科儀器.斜視診療器 |
(Ophthalmic optics - Synoptophores) |
| BS EN ISO 10960-1997 |
橡膠和塑料軟管.在動力條件下耐臭氧性的評定 |
(Rubber and plastic hoses - Assessment of ozone resistance under dynamic conditions) |
| BS EN ISO 10964-1997 |
粘合劑.螺紋緊固件上厭氧粘合劑的抗扭強度的測定 |
(Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners) |
| BS EN ISO 10993-1-2003 |
醫療器械的生物評定.評價和檢驗 |
(Biological evaluation of medical devices - Evaluation and testing) |
| BS EN ISO 10993-10-2002 |
醫療裝置生物學評定.刺激和滯后過敏試驗 |
(Biological evaluation of medical devices - Tests for irritation and delayed-type hypersensitivity) |
| BS EN ISO 10993-11-1996 |
醫療裝置生物學評定.第11部分:系統毒性試驗 |
(Biological evaluation of medical devices - Tests for systemic toxicity) |
| BS EN ISO 10993-12-1997 |
醫療器械的生物評定.樣品制備和參考材料 |
(Biological evaluation of medical devices - Sample preparation and reference materials) |
| BS EN ISO 10993-12-2004 |
醫療器械的生物學評定.樣品制備和參照物品 |
|
| BS EN ISO 10993-13-1999 |
醫療器械的生物評定.聚合醫療器械中降解物的識別與數量 |
(Biological evaluation of medical devices - Identification and quantification of degradation products from polymeric medical devices) |
| BS EN ISO 10993-14-2001 |
醫療器械的生物評定.陶瓷降解產品的識別與合格鑒定 |
(Biological evaluation of medical devices - Identification and quantification of degradation products from ceramics) |
| BS EN ISO 10993-15-2001 |
醫療器械的生物評定.金屬及合金中降解產物的識別與量化 |
(Biological evaluation of medical devices - Identification and quantification of degradation products from metals and alloys) |
| BS EN ISO 10993-16-1997 |
醫療器械的生物評定.降解產品和可瀝濾物的毒理動力學研究設計方法 |
(Biological evaluation of medical devices - Toxicokinetic study design for degradation products and leachables) |
| BS EN ISO 10993-17-2003 |
醫療器械的生物評定.可浸出物質容許限值的確定 |
(Biological evaluation of medical devices - Establishment of allowable limits for leachable substances) |
| BS EN ISO 10993-2-1998 |
醫療器械的生物評定.動物設備要求 |
(Biological evaluation of medical devices - Animal welfare requirements) |
| BS EN ISO 10993-3-2003 |
醫療器械的生物評價.遺傳毒性、致癌性和生殖毒性試驗 |
(Biological evaluation of medical devices - Tests for genotoxicity, carcinogenicity and reproductive toxicity) |
| BS EN ISO 10993-4-2002 |
醫療器械的生物評定.與血液相互作用試驗選擇 |
(Biological evaluation of medical devices - Selection of tests for interactions with blood) |
| BS EN ISO 10993-5-1999 |
醫療器械的生物評定.在試管內的細胞毒性試驗 |
(Biological evaluation of medical devices - Tests for in vitro cytotoxicity) |
| BS EN ISO 10993-7-1996 |
醫療裝置生物學評定.環氧乙烷消毒殘余物 |
(Biological evaluation of medical devices - Ethylene oxide sterilization residuals) |
| BS EN ISO 10993-8-2001 |
醫療器械的生物評定.生物試驗用參考材料的選擇和合格證明 |
(Biological evaluation of medical devices - Selection and qualification of reference materials for biological tests) |
| BS EN ISO 10993-9-1999 |
醫療器械的生物評定.潛在降解產品鑒定和量化框架 |
(Biological evaluation of medical devices - Framework for identification and quantification of potential degradation products) |
| BS EN ISO 11058-1999 |
土工織物和土工織物相關產品.一般水平無負載水滲透特性的測定 |
(Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load) |
| BS EN ISO 11064-1-2001 |
控制中心的人類工效學設計.控制中心的設計原則 |
(Ergonomic design of control centres - Principles for the design of control centres) |
| BS EN ISO 11064-2-2001 |
控制中心的人類工效學設計.控制室的安排原則 |
(Ergonomic design of control centres - Principles for the arrangement of control suites) |
| BS EN ISO 11064-3-2000 |
控制中心的人類工效學設計.控制室布置 |
(Ergonomic design of control centres - Control room layout) |
| BS EN ISO 11064-4-2004 |
控制中心的人類工效學設計.工作站的布置和尺寸 |
|
| BS EN ISO 11064-4-2004 |
控制中心的人類工效學設計.工作站的布置和尺寸 |
|
| BS EN ISO 11064-6-2005 |
控制中心的人類工效學設計.控制中心的環境要求 |
|
| BS EN ISO 1107-2003 |
漁網.結網法.基本術語和定義 |
(Fishing nets - Netting - Basic terms and definitions) |
| BS EN ISO 11070-1999 |
一次性無菌管內導管導引器 |
(Sterile, single-use intravascular catheter introducers) |
| BS EN ISO 11091-1999 |
建筑圖紙.園林設計制圖實施規程 |
(Construction drawings - Landscape drawing practice) |
| BS EN ISO 1110-1996 |
塑料.聚酰胺.試樣的加速調配 |
(Plastics - Polyamides - Accelerated conditioning of test specimens) |
| BS EN ISO 11102-1-1997 |
內燃機.手柄起動裝置.安全技術要求和檢驗 |
(Reciprocating internal combustion engines - Handle starting equipment - Safety requirements and tests) |
| BS EN ISO 11102-2-1997 |
內燃機.手柄起動裝置.脫扣角度的試驗方法 |
(Reciprocating internal combustion engines - Handle starting equipment - Method of testing the angle of disengagement) |
| BS EN ISO 11105-1997 |
小型船舶.汽油發動機和/或汽油罐防水船艙的通風 |
(Small craft - Ventilation of petrol engine and/or petrol tank compartments) |
| BS EN ISO 11111-1-2005 |
紡織機械.安全要求.通用要求 |
|
| BS EN ISO 11111-1996 |
紡織機器的安全要求 |
(Safety requirements for textile machinery) |
| BS EN ISO 11111-2-2005 |
紡織機械.安全要求.紡紗準備和紡紗機 |
|
| BS EN ISO 11111-3-2005 |
紡織機械.安全要求.無紡機械 |
|
| BS EN ISO 11111-4-2005 |
紡織機械.安全要求.紗線處理、纜索和繩索生產機器 |
|
| BS EN ISO 11111-4-2005 |
紡織機械.安全要求.紗線處理、纜索和繩索生產機器 |
|
| BS EN ISO 11111-5-2005 |
紡織機械.安全要求.織造和針織用預梳機 |
|
| BS EN ISO 11111-6-2005 |
紡織機械.安全要求.織物織造機械 |
|
| BS EN ISO 11111-7-2005 |
紡織機械.安全要求.染色和精整機 |
|
| BS EN ISO 11111-7-2005 |
紡織機械.安全要求.染色和精整機 |
|
| BS EN ISO 11114-1-1998 |
可運輸氣瓶.氣瓶和含氣閥門材料的可兼容性.第1部分:金屬材料 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Metallic materials) |
| BS EN ISO 11114-2-2001 |
可運輸氣瓶.氣瓶和含氣閥門材料的可兼容性.非金屬材料 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Non-metallic materials) |
| BS EN ISO 11114-3-1998 |
可運輸氣瓶.氣瓶和含氣閥門材料的可兼容性.第3部分:有氧環境中自燃試驗 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Autogenous ignition test in oxygen atmosphere) |
| BS EN ISO 11116-1-1999 |
氣瓶.閥門與氣瓶連接用17E錐型螺紋.規范 |
(Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Specifications) |
| BS EN ISO 11116-2-1999 |
氣瓶.氣瓶與瓶閥連接用17E錐螺紋.檢驗量規 |
(Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Inspection gauges) |
| BS EN ISO 11120-1999 |
氣體瓶.1501升-30001升水容量的可再填充的無縫鋼管.設計,結構和試驗 |
(Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150l and 3000l - Design, construction and testing) |
| BS EN ISO 11124-1-1994 |
用涂層材料涂覆前鋼表面的準備工作.金屬噴射清潔材料的要求.第1部分:一般介紹和分類 |
(Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - General introduction and classification) |
| BS EN ISO 11124-2-1994 |
用涂層材料涂覆前鋼表面的準備工作.金屬噴射清潔磨料的規范.冷淬鐵砂粒 |
(Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Chilled-iron grit) |
| BS EN ISO 11124-3-1994 |
涂料和其他相關產品應用前鋼底基的預處理.金屬噴射清潔磨料的規范.高碳鑄鋼丸和砂粒 |
(Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - High-carbon cast-steel shot and grit) |
| BS EN ISO 11124-4-1994 |
用涂層材料涂覆前鋼表面的準備工作.金屬噴射清潔磨料的規范.低碳鑄鋼丸 |
(Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Low-carbon cast-steel shot) |
| BS EN ISO 11125-1-1994 |
涂料和相關產品使用前鋼底襯的制備.金屬噴射清潔磨料的試驗方法.取樣 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Sampling) |
| BS EN ISO 11125-2-1994 |
涂料和相關產品使用前鋼底襯的制備.金屬噴射清潔磨料的試驗方法.粒度分布測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Determination of particle size distribution) |
| BS EN ISO 11125-3-1994 |
涂料和相關產品使用前鋼底襯的制備.金屬噴射清潔磨料的試驗方法.硬度測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Determination of hardness) |
| BS EN ISO 11125-4-1994 |
涂料和相關產品使用前鋼底襯的制備.金屬噴射清潔磨料的試驗方法.表面密度的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Determination of apparent density) |
| BS EN ISO 11125-5-1994 |
涂料和相關產品使用前鋼底襯的制備.金屬噴射清潔磨料的試驗方法.不合格微結構顆粒百分比的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Determination of percentage defective particles and of microstr) |
| BS EN ISO 11125-6-1994 |
涂料和相關產品使用前鋼底襯的制備.金屬噴砂清理磨料的試驗方法.雜質測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Determination of foreign matter) |
| BS EN ISO 11125-7-1994 |
涂料和相關產品使用前鋼底襯的制備.金屬噴射清潔磨料的試驗方法.濕度測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Determination of moisture) |
| BS EN ISO 11126-1-1997 |
涂料和其它相關產品應用前鋼底基的預處理.非金屬噴砂清理磨料規范.概述和分類 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - General introduction and classification) |
| BS EN ISO 11126-3-1994 |
涂料和其他相關產品應用前鋼底基的預處理. 非金屬噴砂清理磨料規范.銅精練廠礦渣 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Copper refinery slag) |
| BS EN ISO 11126-4-1994 |
涂料和其它相關產品應用前鋼底基的預處理.非金屬噴砂清理磨料規范.煤爐熔渣 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Coal furnace slag) |
| BS EN ISO 11126-5-1994 |
涂料和其他相關產品應用前鋼底基的預處理.非金屬噴砂清理磨料規范.鎳精練廠礦渣 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Nickel refinery slag) |
| BS EN ISO 11126-6-1994 |
涂料和其它相關產品應用前鋼底基的預處理.非金屬噴砂清理磨料規范.鐵爐熔渣 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Iron furnace slag) |
| BS EN ISO 11126-8-1994 |
涂料和其它相關產品應用前鋼底基的預處理. 非金屬噴砂清理磨料規范.橄欖石砂 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Olivine sand) |
| BS EN ISO 11127-1-1994 |
涂料和其它相關產品應用前鋼底基的預處理. 非金屬噴砂清理磨料試驗方法.制樣 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Sampling) |
| BS EN ISO 11127-2-1994 |
涂料和其它相關產品應用前鋼底基的預處理. 非金屬噴砂清理磨料試驗方法.微粒規格分布測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of particle size distribution) |
| BS EN ISO 11127-3-1994 |
涂料和其它相關產品應用前鋼底基的預處理. 非金屬噴砂清理磨料試驗方法.表觀密度的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of apparent density) |
| BS EN ISO 11127-4-1994 |
涂料和其它相關產品應用前鋼底基的預處理. 非金屬噴砂清理磨料試驗方法.通過玻璃劃痕試驗對硬度的評估 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Assessment of hardness by a glass slide test) |
| BS EN ISO 11127-5-1994 |
涂料和其它相關產品應用前鋼底基的預處理. 非金屬噴砂清理磨料試驗方法.通過玻璃劃痕試驗對硬度的評估 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of moisture) |
| BS EN ISO 11127-6-1994 |
涂料和其它相關產品應用前鋼底基的預處理. 非金屬噴砂清理磨料試驗方法.通過電導測量對水溶雜質的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of water-soluble contaminants by conductivity) |
| BS EN ISO 11127-7-1994 |
涂料和其它相關產品應用前鋼底基的預處理. 非金屬噴砂清理磨料試驗方法.水溶氯化物的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of water-soluble chlorides) |
| BS EN ISO 11130-1999 |
金屬和合金的腐蝕.鹽溶液中的交替浸入試驗 |
(Corrosion of metals and alloys - Alternate immersion test in salt solution) |
| BS EN ISO 11143-2000 |
牙科設備.汞齊合金分離器 |
(Dental equipment - Amalgam separators) |
| BS EN ISO 11144-1997 |
牙科設備.漱口沖洗牙用給排水管接頭 |
(Dental equipment - Connections for supply and waste lines) |
| BS EN ISO 11145-2001 |
光學和光學儀器.激光和有關的激光設備.詞匯和符號 |
(Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols) |
| BS EN ISO 11146-1-2005 |
激光和激光相關設備.激光束寬度、發散角和束擴散率的試驗方法.無象散和簡單象散束 |
|
| BS EN ISO 11146-2-2005 |
激光和激光相關設備.激光束寬度、發散角和束擴散率的試驗方法.一般象散束 |
|
| BS EN ISO 11146-2000 |
激光和激光相關設備.激光束參數的試驗方法.束寬、分散角度和激光束 |
(Laser and laser-related equipment - Test methods for laser beam parameters - Beam width, divergence angle and beam) |
| BS EN ISO 11149-1997 |
光學和光學儀器.激光和激光相關裝置.非通信激光應用的光纖連接器 |
(Optics and optical instruments - Lasers and laser related equipment - Fibre optic connectors for non-telecommunication laser applications) |
| BS EN ISO 11151-1-2000 |
激光和激光相關設備.標準光學件.紫外線、可見光和近紅外光譜范圍內的件 |
(Lasers and laser-related equipment - Standard optical components - Components for the UV, visible and near-infrared spectral ranges) |
| BS EN ISO 11151-2-2000 |
激光和激光相關設備.標準光學件.紅外光譜范圍內的件 |
(Lasers and laser-related equipment - Standard optical components - Components for the infrared spectral range) |
| BS EN ISO 1119-2004 |
產品幾何量技術規范.錐度和錐度角系列 |
|
| BS EN ISO 11196-1997 |
麻醉氣體檢測器 |
(Anaesthetic gas monitors) |
| BS EN ISO 11197-2005 |
醫用供電裝置 |
|
| BS EN ISO 11199-1-1999 |
雙臂操作的助步器,要求和試驗方法.步行支架 |
(Walking aids manipulated by both arms - Requirements and test methods - Walking frames) |
| BS EN ISO 11199-2-1999 |
雙臂操作的助步器,要求和試驗方法.滾動器 |
(Walking aids manipulated by both arms - Requirements and test methods - Rollators) |
| BS EN ISO 1120-2002 |
輸送機皮帶.機械緊固件的強度測定.靜態試驗法 |
(Conveyor belts - Determination of strength of mechanical fastenings - Static test method) |
| BS EN ISO 11200-1996 |
聲學.機器和設備發出的噪聲.在操作工位和其它指定地點測定聲壓的基礎標準用導則 |
(Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positi) |
| BS EN ISO 11201-1996 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所聲壓級的測量.反射平面上基本自由聲波場的工程測試 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free fiel) |
| BS EN ISO 11202-1996 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所聲壓級的測量.調查法 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ) |
| BS EN ISO 11203-1996 |
聲學.機械裝置及設備發出的噪聲.在工作地點和其它試驗場所從聲功率級測量聲壓級 |
(Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level) |
| BS EN ISO 11204-1996 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所聲壓級的測量.測試要求環境條件的改變 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections) |
| BS EN ISO 11210-1995 |
鉑珠寶合金中鉑的測定.二銨六氯鉑沉淀后的重量法 |
(Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate) |
| BS EN ISO 11212-1-1997 |
淀粉和淀粉制品.重金屬含量.原子吸收光譜法測定砷含量 |
(Starch and derived products - Heavy metals content - Determination of arsenic content by atomic absorption spectrometry) |
| BS EN ISO 11212-2-1997 |
淀粉和淀粉制品.重金屬含量.原子吸收光譜法測定汞含量 |
(Starch and derived products - Heavy metals content - Determination of mercury content by atomic absorption spectrometry) |
| BS EN ISO 11212-3-1997 |
淀粉和淀粉制品.重金屬含量.電熱原子化原子吸收光譜法測定鉛含量 |
(Starch and derived products - Heavy metals content - Determination of lead content by atomic absorption spectrometry with electrothermal atomization) |
| BS EN ISO 11212-4-1997 |
淀粉和淀粉制品.重金屬含量.電熱原子化原子吸收光譜法測定鎘含量 |
(Starch and derived products - Heavy metals content - Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization) |
| BS EN ISO 11213-1995 |
淀粉和淀粉制品的檢驗.用酶催化法測定淀粉的乙�；暮� |
(Modified starch - Determination of acetyl content - Enzymatic method) |
| BS EN ISO 11214-1996 |
改進的淀粉.氧化淀粉中羥基團含量的測定 |
(Modified starch - Determination of carboxyl group content of oxidized starch) |
| BS EN ISO 11215-1998 |
改良淀粉.乙酰二淀粉己二酸酯中己二酸含量的測定.氣相色譜法 |
(Modified starch - Determination of adipic acid content of acetylated di-starch adipates - Gas-chromatographic method) |
| BS EN ISO 11216-1998 |
改良淀粉.羧甲基淀粉中羧甲基團含量的測定 |
(Modified starch - Determination of content of carboxymethyl groups in carboxymethyl starch) |
| BS EN ISO 11244-2000 |
牙科用銅焊包埋料 |
(Dental brazing investments) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com