標準號 |
中文名稱 |
英文名稱 |
| prEN 50313-2-1999 |
光電系統太陽能存儲體第2部分：性能測試要求及程序 |
Photovoltaic systems - Solar modules - Part 2: Performance - Test requirements and procedures |
| prEN 50314-1-1999 |
光電系統電荷調節器第1部分：安全性測試要求及程序 |
Photovoltaic systems - Charge regulators - Part 1: Safety - Test requirements and procedures |
| prEN 50314-2-1999 |
光電系統電荷調節器第2部分：EMC-測試要求及程序 |
Photovoltaic systems - Charge regulators - Part 2: EMC - Test requirements and procedures |
| prEN 50314-3-1999 |
光電系統電荷調節器第3部分：性能測試要求及程序 |
Photovoltaic systems - Charge regulators - Part 3: Performance - Test requirements and procedures |
| prEN 50315-1-1999 |
光電系統中使用的蓄能器第1部分：安全性測試要求及程序 |
Accumulators for use in photovoltaic systems - Part 1: Safety - Test requirements and procedures |
| prEN 50315-2-1999 |
光電系統中使用的蓄能器第2部分：性能測試要求及程序 |
Accumulators for use in photovoltaic systems - Part 2: Performance - Test requirements and procedures |
| prEN 50316-1-1999 |
光電照明系統第1部分：安全性測試要求及程序 |
Photovoltaic lighting systems - Part 1: Safety - Test requirements and procedures |
| prEN 50316-2-1999 |
光電照明系統第2部分：EMC-測試要求及程序 |
Photovoltaic lighting systems - Part 2: EMC - Test requirements and procedures |
| prEN 50316-3-1999 |
光電照明系統第3部分：性能測試要求及程序 |
Photovoltaic lighting systems - Part 3: Performance - Test requirements and procedures |
| prEN 50322-1-1999 |
光電系統第1部分：電磁兼容性（EMC）光電抽運系統的要求 |
Photovoltaic systems - Part 1: Electromagnetic compatibility (EMC) - Requirements for photovoltaic pumping systems |
| prEN 50323-1999 |
助聽器一般要求 |
General requirements for hearing aids |
| prEN 50330-1-1999 |
光電半導體轉換器第1部分：PV線換向轉換器的實用交互式故障自動保護接口設計質量與型式批準 |
Photovoltaic semiconductor converters - Part 1: Utility interactive fail safe protective interface for PV-line commutated converters - Design qualification and type approval |
| prEN 50331-1-1999 |
建筑物內的光電系統第1部分：安全要求 |
Photovoltaic systems in buildings - Part 1: Safety requirements |
| prEN 50335-2-94-1994 |
家用及類似電器的安全性第2部分：剪式切草機的特殊要求 |
Safety of household and similar electrical appliances - Part 2: Particular requirements for scissor type grass shears |
| prEN 50339-2000 |
醫療設備X射線膠片 |
Medical devices - X-ray film |
| prEN 50345-2002 |
鐵路設備固定設施電子牽引支持高架連接線的絕緣合成繩 |
Railway applications - Fixed installations; Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines |
| prEN 50349-2002 |
電氣設施承包人的資格 |
Qualification of electrical installation contractors |
| prEN 50350-2003 |
貯熱式家用室內電加熱用充電控制系統測量性能方法 |
Charging control systems for household electric room heating of the storage type - Methods for measuring performance |
| prEN 50351-2003 |
有關供電系統與牽引系統對通信系統的影響的計算和測量方法用的主要標準 |
Basic standard for the calculation and measurement methods relating to the influence of electric power supply and traction systems on telecommunication systems |
| prEN 50352-2003 |
有關供電系統與牽引系統對通信系統的影響的極限 |
Limits relating to the influence of electric power supply and traction systems on telecommunication systems |
| prEN 50359-1-1-2000 |
高級陶瓷第1-1部分：電特性短期的耐電強度的測試方法 |
Advanced technical ceramics - Part 1-1: Electrical properties; Method of test for short term electric strength |
| prEN 50359-1-2-2000 |
高級陶瓷第1-2部分：電特性在溫度為20℃- 800℃范圍內測定表面電阻系數和體電阻系數 |
Advanced technical ceramics - Part 1-2: Electrical properties; Determination of the surface and volume resistivity in the temperature range 20℃ to 800℃ |
| prEN 50367-2002 |
鐵路設備集電系統架式受電弓和架空線路之間的交互作用用技術標準（可自由伸縮） |
Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access) |
| prEN 50369-2003 |
電纜的液封外殼系統 |
Liquid tight sheathing systems for cable management |
| prEN 50370-1-2002 |
電磁兼容性機床的產品系列標準第1部分：電磁輻射 |
Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission |
| prEN 50374-2003 |
導線架設吊籃 |
Conductor cars |
| prEN 50379-1-2003 |
用于測量加熱器具燃燒煙氣參數的便攜式電氣裝置的規范第1部分：一般要求和試驗方法 |
Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods |
| prEN 50379-2-2003 |
用于測量加熱器具燃燒煙氣參數的便攜式電氣裝置的規范第2部分：法定檢查和評估用設備的性能要求 |
Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2: Performance requirements for apparatus used in statutory inspections and assessment |
| prEN 50379-3-2003 |
用于測量加熱器具燃燒煙氣參數的便攜式電氣裝置的規范第3部分：非法定燃?xì)饧訜崞骶卟僮饔迷O(shè)備的性能要求 |
Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 3: Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances |
| prEN 50381-2003 |
有或無內部能源的可運輸?shù)耐L(fēng)房間 |
Transportable ventilated rooms with or without an internal source of release |
| prEN 51-1974 |
道路車輛 牽引車和半拖掛車之間的機械連接器 互換性 |
Road vehicles; mechanical coupling between tractors and semi-trailers; interchangeability |
| prEN 520-2000 |
石膏板 規范、要求和試驗方法 |
Gypsum plasterboards - Definitions, requirements and test methods |
| prEN 54-13-2001 |
火災探測和火災警報系統 第13部分：系統要求和兼容性評定 |
Fire detection and fire alarm systems - Part 13: System requirements and compatibility assessment |
| prEN 54-14-2001 |
火災探測和火災警報系統 第14部分：計劃、設計、安裝、試運轉、使用和維護指南 |
Fire detection and fire alarm systems - Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance |
| prEN 55011-2003 |
工業、科學、醫療（ISM）射頻設備電磁騷擾特性測量方法和限值 |
CISPR 11, Ed. 4.0: Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| prEN 55021-1999 |
CISPR 21：脈沖噪聲對移動無線電通信的騷擾評定其性能暫降的方法和提高性能的措施 |
CISPR 21: Interference to mobile radiocommunications in the presence of impulsive noise - Methods of judging degradation and measures to improve performance |
| prEN 55024-2-1994 |
信息技術設備的抗擾性第2部分：靜電排放要求 |
Immunity of Information Technology Equipment (ITE) - Part 2: Electrostatic discharge requirements |
| prEN 55024-3-1994 |
信息技術設備的抗擾性第3部分：輻射射頻場的要求 |
CISPR 60024: immunity of information technology equipment (ITE); part 3: radiated radio frequency fields requirements |
| prEN 55024-4-1993 |
信息技術設備的抗擾性 第4部分：抗電子瞬變和瞬爆特性 |
Immunity of information technology equipment (ITE); part 4: immunity to electrical fast transients/bursts |
| prEN 55101-2-1991 |
信息技術設備的電磁兼容性要求第2部分：靜電放電要求（CISPR/G(CO)10:1991） |
Electromagnetic compatibility requirements for information technology equipment; part 2: electrostatic discharge requirements (CISPR/G(CO)10:1991) |
| prEN 55105-1995 |
電信終端設備電磁兼容抗擾性要求 |
Electromagnetic compatibility immunity requirements for telecommunication terminal equipment |
| prEN 55106-1995 |
不包括電信終端設備的信息技術設備電磁兼容抗擾性要求 |
Electromagnetic compatibility immunity requirements for information technical equipment excluding telecommunication terminal equipment |
| prEN 556-2-2003 |
醫療器械的消毒 標明為“消過毒”的醫療器械的要求 第2部分：消毒處理的醫療器械的要求 |
Sterilization of medical devices - Requirements for medical devices to be designated STERILE - Part 2: Requirements for aseptically processed medical devices |
| prEN 558-3-1991 |
法蘭管系統使用的金屬閥門 面面間和中心與面間的尺寸 第3部分：級別標記的閥門 |
Metal valves for use in flanged pipe systems; face-to-face and centre-to-face dimensions; part 3: class-designation valves |
| prEN 571-3-1995 |
無損檢測 滲透檢測 第3部分：參照檢測樣塊 |
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks |
| prEN 572-8-2001 |
建物筑用玻璃 基本鈉鈣硅酸鹽玻璃制品 第8部分：供料和最終切割尺寸 |
Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes |
| prEN 572-9-2001 |
建筑物用玻璃 基本鈉鈣硅酸鹽玻璃制品 第9部分：一致性評價 |
Glass in building - Basic soda lime silicate glass - Part 9: Evaluation of conformity |
| prEN 573-4-2003 |
鋁和鋁合金 鍛制產品化學成分和外形 第4部分：產品外形 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products / Note: Intended as replacement for EN 573-4 (1994-08). |
| prEN 573-5-1999 |
鋁和鋁合金 鍛制產品化學成分和外形 第5部分：標準化鍛制產品的編纂法典 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
| prEN 576-2002 |
鋁和鋁合金 再熔非合金鋁錠 規范 |
Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications |
| prEN 58-2003 |
瀝青和瀝青粘合劑 瀝青粘合劑取樣 |
Bitumen and bituminous binders - Sampling bituminous binders / Note: Intended as replacement for EN 58 (1984-03). |
| prEN 593-2003 |
工業閥門 金屬蝶閥 |
Industrial valves - Metallic butterfly valves / Note: Intended as replacement for EN 593 (1998-01). |
| prEN 60034-20-1-2000 |
旋轉電機第20-1部分：控制電機步進電機 |
IEC 60034-20-1: Rotating electrical machinery - Part 20-1: Control motors; Stepping motors |
| prEN 60045-1-1992 |
汽輪機第1部分：規范 |
Steam turbines; part 1: specifications (IEC 60045-1:1991) |
| prEN 60050-486-1994 |
國際電工詞表（IEV）第486章：蓄電池和蓄電池組（IEC 50(486):1999） |
International Electrotechnical Vocabulary (IEV) - Chapter 486: Secondary cells and batteries (IEC 50(486):1991) |
| prEN 60056-2000 |
高壓交流斷路器 |
IEC 60056: High-voltage alternating-current circuit-breakers |
| prEN 60056/prA2-2001 |
高壓交流斷路器 修改prA2：對TRV要求的推薦修改 |
Draft - Amendment 2 to IEC 60056: Recommended changes to TRV requirements |
| prEN 60068-3-8-2003 |
環境試驗第3-8部分：支持文件和指南從不同振動試驗中選擇 |
IEC 60068-3-8, Ed. 1: Environmental testing - Part 3-8: Supporting documentation and guidance; Selecting amongst vibration tests |
| prEN 60076-11-2002 |
電力變壓器第11部分：干式變壓器 |
IEC 60076-11: Power transformers - Part 11: Dry-type transformers |
| prEN 60076-8-1997 |
電力變壓器第8部分：應用指南 |
IEC 60076-8: Power transformers - Application guide |
| prEN 60079-1-2003 |
爆炸性環境用防爆電氣設備第1 部分：防爆外殼“d” |
IEC 60079-1, Ed. 5: Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosures d |
| prEN 60079-19-1992 |
爆炸性環境用防爆電氣設備第19 部分：爆炸性環境（礦井或爆破場所除外）修理和大修 |
Electrical apparatus for explosive gas atmospheres; part 19: repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives) |
| prEN 60079-20-1993 |
爆炸性環境用防爆電氣設備第20部分：防爆外殼的非金屬零件 |
Electrical apparatus for explosive gas atmospheres; part 20: non-metallic parts of flameproof enclosures |
| prEN 60079-21-1993 |
爆炸性環境用防爆電氣設備第21部分：通氣和排氣裝置 |
Electrical apparatus for explosive gas atmospheres; part 21: breathing devices and draining devices |
| prEN 60079-25-2003 |
爆炸性環境用防爆電氣設備第25部分：內在安全系統 |
IEC 60079-25, Ed. 1: Electrical apparatus for explosive gas atmospheres - Part 25: Intrinsically safe systems |
| prEN 60099-4-2002 |
避雷器第4部分：交流電系統用無間隙金屬氧化物避雷器 |
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. Systems |
| prEN 60099-6-2002 |
避雷器第6部分：空隙為串聯和并聯結構的避雷器額定值等于和小于52kV |
IEC 60099-6, Ed. 1: Surge arresters - Part 6: Surge arresters containing both series and parallel gapped structures; Rated 52 kV and less |
| prEN 601-2003 |
鋁和鋁合金 鑄件 與食品接觸用鑄件的化學成分 |
Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff / Note: Intended as replacement for EN 601 (1994-11). |
| prEN 60115-9-1-2003 |
電子設備用固定電阻器第9-1部分：空白詳細規范具有單個可測量的固定表面裝配電阻器網評定級EZ |
IEC 60115-9-1: Fixed resistors for use in electronic equipment - Part 9-1: Blanc detail specification: Fixed surface mount resistor networks with individually measurable resistors; Assessment level EZ |
| prEN 60115-9-2003 |
電子設備用固定電阻器第9部分：分規范具有單個可測量的固定表面裝配電阻器 |
IEC 60115-9: Fixed resistors for use in electronic equipment - Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors |
| prEN 60118-13-2001 |
助聽器第13部分：電磁兼容性（EMC）產品標準 |
IEC 60118-13: Hearing aids - Part 13: Electromagnetic compatibility (EMC); Product standard |
| prEN 60118-8-2001 |
助聽器第8部分：在模擬現場工作條件下助聽器的性能測量方法 |
IEC/CDV 60118-8: Hearing aids - Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions |
| prEN 60129-2000 |
IEC 60129的草案修訂：交流隔離器和接地開關 |
Draft revision of IEC 60129: Alternating current disconnectors and earthing switches |
| prEN 60169-29-1995 |
射頻連接器第29部分：具有螺紋推拉、卡鎖連接或滑軌或面板用小型射頻同軸連接器特性阻抗50歐姆（型號1. |
Draft IEC 60169-29: Radio-frequency connectors - Part 29: Miniature r.f.coaxial connectors with screw-, push-pull, and snap-on coupling or slide-in rack and panel applications - Characteristic impedance 50 ohms (type 1,0/2,3) |
| prEN 60182-4-1994 |
繞組線的基本尺寸第4部分：線繞電阻器絲的直徑 |
Basic dimensions of winding wires; part 4: diameters of conductors for round resistance wires (IEC 60182-4:1971) |
| prEN 60191-2-2001 |
P-VSON略圖系列的建議-4/5和6根引線的半導體 |
Proposal for outline family of P-VSON (will be published as Outline 164E-a) - 4/5 and 6 leaded SMD (Body Size D x E: 2,00 x 1,25 mm) (will be published as Outline 161-E-a) |
| prEN 60191-6-10-2003 |
半導體器件的機械標準化第6-10部分：P-VSON尺寸的一般規則 |
IEC 60191-6-10, Ed. 1: Mechanical standardization of semiconductor devices - Part 6-10: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; General rules for the dimensions of P-VSON |
| prEN 60191-6-11-2002 |
半導體器件的機械標準化第6-11部分：矩形小間距球狀排列（FBGA）的包裝設計指南 |
Mechanical standardization of semiconductor devices - Part 6-11: General design guidelines for rectangular Fine Pitch Ball Grid Array Packages (FBGA) |
| prEN 60191-6-2003 |
半導體器件的機械標準化第6部分：表面安裝半導體器件封裝外形圖繪制的一般規則 |
Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface-mounted semiconductor device packages |
| prEN 60191-6-7-2003 |
半導體器件的機械標準化第6-7部分：P-VQFN尺寸的一般規則 |
IEC 60191-6-7, Ed. 1.0: Mechanical standardization of semiconductor devices - Part 6-7: General rules for the dimensions of P-QFN |
| prEN 602-2003 |
鋁和鋁合金 鍛制品 生產與食品接觸的材料中使用的半成品的化學成分 |
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff / Note: Intended as replacement for EN 602 (1994-11). |
| prEN 60204-X-1994 |
機械的安全機械的電氣設備第X部分：電壓36kV的高壓設備的一般要求 |
Safety of machinery; electrical equipment of machines; part X: general requirements for high voltage equipment for voltages up to 36 kV |
| prEN 60225-1992 |
電聲學、八頻帶和小八帶過濾器 |
Electroacoustics; octave-band and fractional octave-band filters |
| prEN 60225-22-7-2001 |
電氣繼電器第22-7部分：量度繼電器和保護裝置的電氣騷擾試驗 |
Electrical relays - Part 22-7: Electrical disturbance tests for measuring relays and protection equipment; Power frequency imunity test |
| prEN 60247-2001 |
標準號： |
中文標題： |
| prEN 60264-4-1-1997 |
繞組線的包裝第4-1部分：試驗方法熱塑性材料交貨線盤 |
|
| prEN 60269-3-1-1992 |
低壓熔斷器第3-1部分：非熟練人員使用的熔斷器（主要是家用和類似用途的熔斷器）的補充要求第3節：針形 |
Low-voltage fuses; part 3: supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications); section III: pin-type fuses |
| prEN 60282-2-1995 |
高壓容斷器第2部分：噴射式熔斷器 |
Draft IEC 282-2: High-voltage fuses - Part 2: Expulsion fuses |
| prEN 60286-6-2003 |
自動裝配用件的包裝第6部分：表面安裝組件的散裝盒包裝 |
IEC 60286-6: Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components |
| prEN 6029-1998 |
航空航天系列耐腐鋼具有1.5*螺紋直徑最小嚙合的UNJ螺紋體可調單叉的棒狀端頭尺寸和載荷英制系列 |
Aerospace series - Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 * thread diameter in corrosion resisting steel - Dimensions and loads - Inch series |
| prEN 60296-2003 |
變壓器和開關設備用未使用過的礦物絕緣油規范 |
IEC 60296, Ed. 3: Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| prEN 60298-2002 |
額定電壓1KV以上至52KV及以下交流金屬封閉開關設備和控制設備 |
AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| prEN 60300-3-1-1995 |
可信性管理第3-1部分：應用指南可信性技術分析方法指南 |
Dependability management - Part 3: Application guide - Section 1: Analysis techniques for dependability: Guide on methodology (IEC 60300-3-1:1991) |
| prEN 60300-3-12-2001 |
可信性管理第3-12部分：應用指南集成邏輯支持 |
IEC 60300-3-12, Ed. 1: Dependability management - Part 3-12: Application guide; Integrated logistic support |
| prEN 60300-3-4-1996 |
可信性管理第3-4部分：應用指南可信性要求規定指南 |
IEC 300-3-4: Dependability management - Part 3: Application guide - Section 4: Guide to the specification of dependability requirements |
| prEN 60300-3-9-1995 |
可信性管理第3-9部分：應用指南技術系統的風險分析 |
Draft IEC 300: Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems |
| prEN 60308-2001 |
水輪機試驗控制系統 |
IEC 60308: Hydraulic turbines-testing of control systems |
| prEN 60310-2003 |
鐵路應用運輸車輛的牽引變壓器和電感器 |
Railway applications - Traction transformers and inductors on board rolling stock |
| prEN 60315-6-1993 |
各種發射類別的無線電接收機的測量方法第6部分：一般用途通信接收機 |
Methods of measurement on radio receivers for various classes of emission; part 6: general purpose communication receivers (IEC 60315-6:1991) |
| prEN 60317-41-1996 |
特種繞組線規范第41部分：130L級可軟焊聚酯漆包圓銅線 |
IEC 317-41: Specifications for particular types of winding wires - Part 41: Solderable polyester enamelled round copper wire, class 130L |
| prEN 60317-54-2001 |
特種繞組線規范第54部分：155L級聚酯漆包圓銅線 |
Specifications for particular types of winding wires - Part 54: Polyester enamelles round copper wire, class 155L |
| prEN 60335-2-102-2003 |
家用和類似用途電器設備的安全 第2-102部分：與電器連接的用于燃?xì)�、油和固體燃料燃燒設備的特殊要求 |
IEC 60335-2-102, Ed 1.0: Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| prEN 60335-2-104-2002 |
家用和類似用途電器設備的安全 第2-104部分： |
IEC 60335-2-104, Ed. 1.0: Household and similar electrical appliances - Safety - Part 2-104: Particular requirements from air conditioning and refrigeration equipment |
| prEN 60335-2-72-2002 |
家用和類似用途電器的安全第2-72部分：工業和商業用地板自動處理機的特殊要求 |
IEC 60335-2-72: Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for automatic machines for floor treatment for industrial and commercial use |
| prEN 60335-2-76-2002 |
家用和類似用途電器的安全第2-76部分：柵欄充電器的特殊要求 |
IEC 60335-2-76, Ed. 2.0: Household and similar electrical appliances - Safety - Part 2-76: Particular requirements for electric fence energizers |
| prEN 60335-2-79-2002 |
家用和類似用途電器的安全第2-79部分：工業和商業用高壓清潔器和蒸汽清潔器的特殊要求 |
IEC 60335-2-79, Ed. 2.0: Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners, for industrial and commercial use |
| prEN 60364-5-51/prAA-1994 |
建筑物的電氣設施 第5-51部分：電氣設備的選擇和安裝 共同規則的修改草案AA |
Draft amendment to IEC 60364-5-51 (1979): electrical installations of buildings; part 5: selection and erection of electrical equipment; chapter 51: common rules |
| prEN 60379-2003 |
家用電熱水器性能測試方法草案 |
Methods for measuring the performance of electric storage water-heaters for household purpose (IEC 60379:1987, modifiziert) / Note: Intended as replacement for HD 500 S1 (1988). |
| prEN 60384-21-2002 |
電子設備的固定電容器 第21部分：分規范 固體表面1類陶瓷電介質裝置的多層固定電容器 評定水平EZ |
Fixed capacitors for use in electronic equipment - Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, class 1, assessment level EZ |
| prEN 60384-22-1-2002 |
電子設備的固定電容器 第22-1部分：空白詳細規范 固體表面2級陶瓷電介質裝置的多層固定電容器 評定水平E |
Fixed capacitors for use in electronic equipment - Part 22-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, class 2, assessment level EZ |
| prEN 60384-22-2002 |
電子設備的固定電容器 第22部分：分規范 固體表面2級陶瓷電介質裝置的多層固定電容器 評定水平EZ 草案 |
Fixed capacitors for use in electronic equipment - Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, class 2, assessment level EZ |
| prEN 60384-4-1999 |
電子設備用固定電容器 第4部分：分規范 固體和非固體電解質鋁電解電容器 |
Fixed capacitors for use in electronic equipment - Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte (IEC 60384-4:1998) |
| prEN 60384-4/prA1-1999 |
電子設備用固定電容器 第4部分：分規范 固體和非固體電解質鋁電解電容器修改草案１ |
Amendment 1 to IEC 60384-4 |
| prEN 60390-2-1997 |
工業用插頭、插座和耦合器 第2部分：插銷和插套附件的尺寸互換性要求草案 |
Draft IEC 60309-2: Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeablitiy requirements for pin and contact-tube accessories |
| prEN 60404-1-1997 |
磁性材料 第1部分：分類 |
Revision of IEC 60404-1: Magnetic materials - Part 1: Classification |
| prEN 60416-1994 |
設備用圖形符號的一般原則草案 |
General principles for the creation of graphical symbols for use on equipment (IEC 60416:1988) |
| prEN 60436-2002 |
家用電動洗碗機 性能測試方法 |
Draft IEC 60436, Ed. 3: Electric dishwashers for household use - Methods for measuring the performance |
| prEN 60456-2003 |
家用織物洗衣機 測量性能的方法 草案 |
IEC 60456, Ed. 4.0: Clothes washing machines for household use - Methods for measuring the performance / Note: Intended as replacement for EN 60456 (1999-06). |
| prEN 6046-1998 |
航空航天系列耐腐鋼球形普通軸承窄系列尺寸和載荷英制系列 |
Aerospace series - Bearings, spherical plain, in corrosion resisting steel - Narrow series - Dimensions and loads - Inch series |
| prEN 60466-1992 |
額定電壓1KV以上至38KV（包括38KV）交流絕緣封閉開頭設備和控制設備 草案 |
A.C. insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 38 kV (IEC 60466:1987) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com