標準號 |
中文名稱 |
英文名稱 |
| BS EN 61082-3-1994 |
電氣技術文獻的制備.接線圖、表及說明 |
(Preparation of documents used in eletrotechnology - Connection diagrams, tables and lists) |
| BS EN 61082-4-1996 |
電氣技術文獻的制備.配置和安裝文獻 |
(Preparation of documents used in electrotechnology - Location and installation documents) |
| BS EN 61083-1-2001 |
高壓脈沖試驗測量用數字記錄儀.數字記錄儀的要求 |
(Digital recorders for measurements in high-voltage impulse tests - Requirements for instruments) |
| BS EN 61086-1-1995 |
負載印制電路板(保護涂層)規范.定義、分類和一般要求 |
(Specification for loaded printed wire boards (conformal coatings) - Definitions, classification and general requirements) |
| BS EN 61086-1-2004 |
承載印制電路板用涂料(敷形涂料)規范.定義、分類及一般要求 |
|
| BS EN 61086-1-2004 |
承載印制電路板用涂料(敷形涂料).定義、分類及一般要求 |
|
| BS EN 61086-2-1995 |
負載印制電路板(保護涂層)規范.試驗方法 |
(Specification for loaded printed wire boards (conformal coatings) - Methods of test) |
| BS EN 61086-2-2004 |
承載印制電路板用涂料(敷形涂料).試驗方法 |
|
| BS EN 61086-2-2004 |
承載印制電路板用涂料(敷形涂料).試驗方法 |
|
| BS EN 61086-3-1-1995 |
加感印制電路板用涂覆層(保形敷層).第3部分:專用材料規范.活頁1:通用(I類)和高可靠性(II類)涂層 |
(Specification for loaded printed wire boards (conformal coatings) - Coatings for loaded printed wire boards (conformal coatings) - Part 3: Specifications for individual materials - Coatings for genera) |
| BS EN 61086-3-1-2004 |
承載印制電路板用涂料(敷形涂料).單項材料規范.通用(I類)、高可靠性(II類)和航空涂料 |
|
| BS EN 61086-3-1-2004 |
承載印制電路板用涂料(敷形涂料).單項材料規范 |
|
| BS EN 61086-3-1-2004 |
承載印制電路板用涂料(敷形涂料).單項材料規范.通用(1級)、高可靠性(2級)和航空(3級)涂料 |
|
| BS EN 61094-1-2001 |
測量傳聲器的規范.實驗室標準傳聲器規范 |
(Specification for measurement microphones - Specifications for laboratory standard microphones) |
| BS EN 61094-2-1994 |
測量傳聲器的規范.互易技術對實驗室標準傳聲器進行壓力校證的基本方法 |
(Specification for measurement microphones - Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique) |
| BS EN 61094-3-1996 |
測量傳聲器-第3部分:用互易技術對實驗室標準傳聲器的自由場校準的基本方法 |
(Specification for measurement microphones - Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique) |
| BS EN 61094-4-1996 |
測量傳聲器規范.第4部分:工作標準傳聲器的規范 |
(Specification for measurement microphones - Specifications for working standard microphones) |
| BS EN 61094-5-2002 |
測量傳聲器.比較用工作標準傳聲器的壓力校準方法 |
(Measurement microphones - Methods for pressure calibration of working standard microphones by comparison) |
| BS EN 61095-1993 |
家用和類似用途機電接觸器規范 |
(Specification for electromechanical contactors for household and similar purposes) |
| BS EN 61096-1993 |
數字激光唱機用放音設備特性的測量方法 |
(Methods of measuring the characteristics of reproducing equipment for digital audio compact discs) |
| BS EN 61097-1-1993 |
全球海上遇險和安全系統(GMDSS).雷達應答器.海上搜索和營救(SART).第1部分:操作和性能要求、試驗方法和要求 |
(Global maritime distress and safety system (GMDSS) - Radar transponder - Marine search and rescue (SART) - Operational and performance requirements, methods of testing and required test results) |
| BS EN 61099-1992 |
電工用新鮮合成有機酯規范 |
(Specification for unused synthetic organic esters for electrical purposes) |
| BS EN 611-1-1996 |
錫和錫合金.錫鉛合金和錫鉛合金器皿.錫鉛合金 |
(Tin and tin alloys - Pewter and pewterware - Pewter) |
| BS EN 611-2-1997 |
錫和錫合金.錫鉛合金和錫鉛合金器皿.第2部分:錫鉛合金器皿 |
(Tin and tin alloys - Pewter and pewterware - Pewterware) |
| BS EN 61100-1993 |
根據燃點和凈熱值對絕緣液體的分類 |
(Classification of insulating liquids according to fire point and net calorific value) |
| BS EN 61101-1994 |
在0.5MHz-15MHz頻率范圍使用平面掃描技術水聽器校正規范 |
(Specification for absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHz to 15 MHz) |
| BS EN 61102-1994 |
采用頻率范圍為0.5MHz至15MHz的水聽器對超聲場的測量和特性規范 |
(Specification for measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0.5 MHz to 15 MHz) |
| BS EN 61104-1993 |
小型視盤錄像系統.12cm CD-V |
(Compact disc video system - 12 cm CD-V) |
| BS EN 61105-1994 |
磁帶錄像系統用基準磁帶規范 |
(Specification for reference tapes for video tape recorder systems) |
| BS EN 61106-1993 |
視盤.參數測量方法 |
(Videodisks - Methods of measurement for parameters) |
| BS EN 61108-1-2003 |
全球?qū)Ш叫l(wèi)星系統(GNSS).全球定位系統(GPS).接收機設備.性能標準、測試方法和要求的測試結果 |
(Global navigation satellite systems (GNSS) - Global positioning system (GPS) - Receiver equipment - Performance standards, methods of testing and required test results) |
| BS EN 61108-2-1998 |
全球?qū)Ш叫l(wèi)星系統(GNSS).全球?qū)Ш叫l(wèi)星系統(GLONASS).接收設備.性能標準、試驗方法和所要求的試驗結果 |
(Global navigation satellite systems (GNSS) - Global navigation satellite systems (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results) |
| BS EN 61108-4-2004 |
海上導航和無線電通信設備和系統.全球?qū)Ш叫l(wèi)星系統(GNSS).船載DGPS和DGLONASS無線電信標接收設備.性能要求、試驗方法和所要求的試驗結果 |
|
| BS EN 61108-4-2004 |
全球?qū)Ш叫l(wèi)星系統(GNSS).船載DGPS和DGLONASS無線電信標接收設備.性能要求、試驗方法和所要求的試驗結果 |
|
| BS EN 61108-4-2004 |
海上導航和無線電通信設備和系統.全球?qū)Ш叫l(wèi)星系統(GNSS).船載DGPS和DGLONASS無線電信標接收設備.性能要求、試驗方法和所要求的試驗結果 |
|
| BS EN 61110-1992 |
船用奧米伽遠程導航系統和壓差?yuàn)W米伽遠程導航系統接收機.運行和性能要求.試驗方法和需要的試驗結果 |
(System Omega and differential Omega receivers for ships - Operational and performance requirements - Methods of testing and required test results) |
| BS EN 61114-1-1999 |
在12GHz的頻帶上傳送衛星廣播用接收天線的測量方法.電測量 |
(Methods of measurement on receiving antennas for satellite broadcast transmissions in the 12 GHz band - Electrical measurements) |
| BS EN 61114-2-1997 |
在12GHz的頻帶上傳送衛星廣播用接收天線的測量方法.專用及公用接收天線的機械及環境試驗 |
(Methods of measurement on receiving antennas for satellite broadcast transmissions in the 12 GHz band - Mechanical and environmental tests on individual and collective receiving antennas) |
| BS EN 61115-1994 |
程序分析器的處理試樣系統性能的表達法 |
(Expression of performance of sample handling systems for process analyzers) |
| BS EN 61116-1995 |
小型水電站機電設備導則 |
(Electromechanical equipment guide for small hydroelectric installations) |
| BS EN 61118-1994 |
使用12.65mm(0.5in)磁帶的螺旋掃描盒式磁帶錄像系統規范.M2型 |
(Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape - Type M2) |
| BS EN 61119-1-1994 |
數字音頻盒式磁帶系統(DAT).尺寸和特性 |
(Digital audio tape cassette system (DAT) - Dimensions and characteristics) |
| BS EN 61119-2-1994 |
數字音頻盒式磁帶系統(DAT).DAT校正磁帶 |
(Digital audio tape cassette system (DAT) - DAT calibration tape) |
| BS EN 61119-3-1994 |
數字音頻盒式磁帶.數字音頻盒式磁帶的特性 |
(Digital audio tape cassette system (DAT) - DAT tape properties) |
| BS EN 61119-5-1995 |
盒式數字錄音磁帶系統.專業用盒式數字錄音磁帶(DAT)系統 |
(Digital audio tape cassette system (DAT) - DAT for professional use) |
| BS EN 61119-6-1994 |
數字音頻盒式磁帶系統.系列復制磁帶系統 |
(Digital audio tape cassette system (DAT) - Serial copy management system) |
| BS EN 61120-1-1993 |
使用6.3mm磁帶的專業用數字音頻磁帶錄音機帶盤系統.一般要求 |
(Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use - General requirements) |
| BS EN 61120-2-1994 |
專業用的,采用6.3mm磁帶的數字音頻盤式磁帶錄音系統.第2部分:數據格式A |
(Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use - Format A) |
| BS EN 61120-3-1994 |
專業用的,采用6.3mm磁帶的數字音頻盤式磁帶錄音系統.第3部分:數據格式B |
(Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use - Format B) |
| BS EN 61120-4-1993 |
使用6.3mm磁帶、專業用數字磁帶錄音機帶盤系統. 第4部分:磁帶性能:定義和測量方法 |
(Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape for professional use - Magnetic tape properties: definitions and methods of measurement) |
| BS EN 61120-5-1996 |
使用6.3mm磁帶的專業用數字音頻磁帶錄音機帶盤系統.帶盤 |
(Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use - Reels) |
| BS EN 61121-1999 |
家用滾筒式烘干機.性能的測量方法 |
(Tumble dryers for household use - Methods for measuring the performance) |
| BS EN 61122-1994 |
靜止視頻軟盤磁性錄制系統 |
(Specification for still video floppy disk magnetic recording system) |
| BS EN 61125-1993 |
新鮮烴基絕緣油氧化穩定性評定的試驗方法 |
(Unused hydrocarbon-based insulating liquids - Test methods for evaluating the oxidation stability) |
| BS EN 61131-1-2003 |
可編程控制器.一般說明 |
(Programmable controllers - General information) |
| BS EN 61131-2-2003 |
程序控制器.設備要求和試驗 |
(Programmable controllers - Equipment requirements and tests) |
| BS EN 61131-3-2003 |
可編程控制器.程序設計語言 |
(Programmable controllers - Programming languages) |
| BS EN 61131-5-2001 |
可編程序控制器.通信 |
(Programmable controllers - Communications) |
| BS EN 61131-7-2001 |
可編程序控制器.模糊控制程序 |
(Programmable controllers - Fuzzy control programming) |
| BS EN 61135-1994 |
臺卡遠程連續波相位雙曲線無線電導航系統.船用接收機.最少性能標準.試驗方法和試驗結果 |
(Decca Navigator system:Receivers for ships - Minimum performance standards - Methods of testing and required test results) |
| BS EN 61136-1-1998 |
半導體電力變換器.可調節速度的電驅動系統.一般要求.用于直流電動機驅動的額定值規范 |
(Semiconductor power convertors - Adjustable speed electric drive systems - General requirements - Rating specifications, particularly for d.c. motor drives) |
| BS EN 61138-1998 |
便攜式接地設備和短路電流設備用電纜 |
(Cables for portable earthing and short-circuiting equipment) |
| BS EN 61140-2002 |
電擊防護.裝置和設備的通用概念 |
(Protection against electric shock - Common aspects for installation and equipment) |
| BS EN 61143-1-1992 |
電氣測量?jī)x表規范.X-t記錄儀.定義和要求 |
(Specification for electrical measuring instruments - X-t recorders - Definitions and requirements) |
| BS EN 61143-2-1993 |
電氣測量?jī)x表.X-t記錄儀.推薦補充試驗方法 |
(Specification for electrical measuring instruments - X-t recorders - Recommended additional test methods) |
| BS EN 61144-1993 |
測定絕緣液體氧氣指數的試驗方法 |
(Test method for the determination of oxygen index of insulating liquids) |
| BS EN 61146-1-1997 |
攝像機(PAL/SECAM/NTSC).測量方法.第1部分:非廣播單測頭攝像機 |
(Video cameras (PAL/SECAM/NTSC) - Method of measurement - Non-broadcast single-sensor cameras) |
| BS EN 61146-2-1997 |
視頻攝影機.測量方法.兩個或三個傳感器的專業攝影機 |
(Video cameras (PAL/SECAM/NTSC) - Method of measurement - Two- and three-sensor professional cameras) |
| BS EN 61146-3-1997 |
視頻攝影機(PAL/SECAM/NTSC).測量方法.非廣播攝影錄像機 |
(Video cameras (PAL/SECAM/NTSC) - Method of measurement - Non-broadcast camera-recorders) |
| BS EN 61150-1994 |
堿性蓄電池.小型電池設計用密封鎳鎘單塊可充電電池 |
(Alkaline secondary cells and batteries - Sealed nickel-cadmium rechargeable monobloc batteries in button cell design) |
| BS EN 61152-1994 |
金屬護皮溫度件的尺寸規范 |
(Specification for dimensions of metal-sheathed thermometer elements) |
| BS EN 61157-1995 |
超音頻醫療診斷設備音頻輸出說明要求 |
(Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment) |
| BS EN 61158-2-1994 |
工業控制系統用范圍總線標準.物理層規范和操作定義 |
(Fieldbus standard for use in industrial control systems - Physical layer specification and service definition) |
| BS EN 61158-2-2004 |
測量和控制用數字?jǐn)?shù)據通信.工業控制系統用現場總線.物理層規范和服務定義 |
|
| BS EN 61158-2-2004 |
工業控制系統用現場總線標準.物理層規范和服務定義 |
|
| BS EN 61158-2-2004 |
測量和控制用數字?jǐn)?shù)據通信.工業控制系統用現場總線.物理層規范和服務定義 |
|
| BS EN 61158-3-2004 |
工業控制系統用現場總線標準.數據鏈路服務定義 |
|
| BS EN 61158-3-2004 |
測量和控制用數字?jǐn)?shù)據通信.工業控制系統用現場總線.數據鏈路服務定義 |
|
| BS EN 61158-4-2004 |
工業控制系統用現場總線標準.數據鏈路協議規范 |
|
| BS EN 61158-5-2004 |
測量和控制用數字?jǐn)?shù)據通信.工業控制系統用現場總線.應用層服務定義 |
|
| BS EN 61158-5-2004 |
工業控制系統用現場總線標準.應用層服務定義 |
|
| BS EN 61158-5-2004 |
測量和控制用數字?jǐn)?shù)據通信.工業控制系統用現場總線.應用層服務定義 |
|
| BS EN 61158-6-2004 |
測量和控制用數字?jǐn)?shù)據通信.工業控制系統用現場總線.應用層協議規范 |
|
| BS EN 61158-6-2004 |
工業控制系統用現場總線標準.應用層協議規范 |
|
| BS EN 61158-6-2004 |
測量和控制用數字?jǐn)?shù)據通信.工業控制系統用現場總線.應用層協議規范 |
|
| BS EN 61161-1995 |
液體中頻率范圍為0.5MHz-25MHz超聲波功率測量規范 |
(Specification for ultrasonic power measurement in liquids in the frequency range 0.5 MHz to 25 MHz) |
| BS EN 61162-1-2001 |
船舶導航和無線電通信設備及系統.數字接口.簡單擴音器和復合聽聲器 |
(Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Single talker and multiple listeners) |
| BS EN 61162-2-1999 |
船舶導航和無線電通信設備及系統.數字接口.高速傳輸單擴音器和多聽聲器 |
(Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Single talker and multiple listeners, high-speed transmission) |
| BS EN 61162-400-2002 |
航海和無線電通信設備及系統.數字接口.復合擴音器和復合聽聲器. 船舶系統互聯絡.緒論和一般原則 |
(Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Multiple talkers and multiple listeners - Ship systems interconnection - Introduction and general principles) |
| BS EN 61162-401-2002 |
海上導航和無線電通信設備及系統.數字接口.多方通話器和受話器.船舶系統互連.應用輪廓 |
(Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Multiple talkers and multiple listeners - Ship systems interconnection - Application profile) |
| BS EN 61162-410-2002 |
海上導航和無線電通信設備及系統.數字接口.多方通話器和受話器.船舶系統互連.傳輸輪廓要求和基本傳輸輪廓 |
(Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Multiple talkers and multiple listeners - Ship systems interconnection - Transport profile requirements and basi) |
| BS EN 61162-420-2002 |
海上導航和無線電通信設備及系統.數字接口.多方通話器和受話器.船舶系統互連.配套標準要求和基本配套標準 |
(Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Multiple talkers and multiple listeners - Ship systems interconnection - Companion standard requirements and bas) |
| BS EN 61164-2004 |
可靠性增長.統計試驗和估計方法 |
|
| BS EN 61166-1993 |
高壓交流斷路器規范.地震合格鑒定指南 |
(Specification for high-voltage alternating current circuit-breakers - Guide for seismic qualification of high-voltage alternating current circuit-breakers) |
| BS EN 61168-1994 |
醫用電氣設備.放射治療模擬器功能特性說明方法 |
(Medical electrical equipment - Particular requirements for performance - Methods of declaring functional performance characteristics of radiotherapy simulators) |
| BS EN 61169-1-1-1997 |
射頻連接器.單個、多系列、雙語空白詳細規范 |
(Radio-frequency connectors - Single, multi-series, dual-language blank detail specification) |
| BS EN 61169-1-1996 |
射頻連接器.第1部分:總規范.一般要求和測量方法 |
(Radio-frequency connectors - Generic specification - General requirements and measuring methods) |
| BS EN 61169-2-2002 |
射頻連接器.分規范.9.52型射頻同軸連接器 |
(Radio-frequency connectors - Sectional specification - Radio frequency coaxial connectors of type 9,52) |
| BS EN 61169-24-2002 |
射頻連接器.分規范.通常用于75歐姆電纜分配系統帶螺紋連接的射頻同軸連接器(F型) |
(Radio-frequency connectors - Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)) |
| BS EN 61169-31-2000 |
射頻連接器.帶有內徑為1.0mm(0.039in)帶螺紋聯接器的外部導體的射頻同軸連接器.特性阻抗50歐姆(1.0型) |
(Radio-frequency connectors - RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling - Characteristic impedance 50 ohms (type 1,0)) |
| BS EN 61169-32-2000 |
射頻連接器.帶有內徑為1.85mm(0.072in)帶螺紋聯接器的外部導體的射頻同軸連接器.特性阻抗50歐姆(1.85型) |
(Radio-frequency connectors - RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling - Characteristic impedance 50 ohms (type 1,85)) |
| BS EN 61169-33-1997 |
射頻連接器.BMA r.f.系列連接器的分規范 |
(Radio-frequency connectors - Sectional specification for series BMA r.f. connectors) |
| BS EN 61169-36-1997 |
射頻連接器.帶有插入式耦合的微型r.f.同軸連接器.特性阻抗50歐姆(MCX型) |
(Radio-frequency connectors - Microminiature r.f. coaxial connectors with snap-on coupling - Characteristic impedance 50 ohms (type MCX)) |
| BS EN 61173-1995 |
光電功率發生系統過壓保護導則 |
(Overvoltage protection for photovoltaic (PV) power generating systems - Guide) |
| BS EN 61174-2002 |
海上導航和無線電通信設備和系統.電子流程圖展示和信息系統(ECDIS).操作和性能要求、試驗方法和要求的試驗 |
(Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required t) |
| BS EN 61175-1993 |
信號和連接的術語名稱 |
(Designations for signals and connections) |
| BS EN 61176-1994 |
手持式電動圓鋸性能的測試方法 |
(Hand-held electric mains voltage operated circular saws - Methods for measuring the performance) |
| BS EN 61179-1993 |
使用D2(NTSC,PAL,PAL-M)格式19mm磁帶的螺旋掃描數字復合盒式錄像系統 |
(Specification for helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M)) |
| BS EN 61180-1-1993 |
低壓設備的高壓試驗技術.第1部分:定義、試驗和方法要求 |
(High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements) |
| BS EN 61180-2-1995 |
低壓設備的高壓試驗技術.試驗設備 |
(High-voltage test techniques for low-voltage equipment - Test equipment) |
| BS EN 61181-1993 |
浸漬絕緣材料.溶解氣體分析在電氣設備出廠試驗中的應用 |
(Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment) |
| BS EN 61182-7-1996 |
印制板.電子數據描述和轉換.第7部分:裸板數字格式電氣試驗 |
(Printed boards - Electronic data description and transfer - Bare board electric test information in digital form) |
| BS EN 61183-1995 |
電聲學.聲級計的無規入射聲場及擴散聲場的校正 |
(Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters) |
| BS EN 61184-1997 |
卡口燈座 |
(Bayonet lampholders) |
| BS EN 61185-1997 |
電源設備用的磁氧化鐵芯尺寸 |
(Magnetic oxide cores - (ETD-cores) intended for use in power supply applications - Dimensions) |
| BS EN 61185-2005 |
電源用鐵氧體磁芯(ETD磁芯).尺寸 |
|
| BS EN 61187-1996 |
電氣和電子測量設備.文獻工作 |
(Electrical and electronic measuring equipment - Documentation) |
| BS EN 61188-1-1-1997 |
印制板和組件.設計和使用.常規要求.電子組件平整度考慮 |
(Printed boards and assemblies - Design and use - Generic requirements - Flatness considerations for electronic assemblies) |
| BS EN 61188-1-2-1998 |
印制板和組件.設計和使用.常規要求.控制阻抗 |
(Printed boards and assemblies - Design and use - Generic requirements - Generic requirements - Controlled impedance) |
| BS EN 61188-5-1-2003 |
印制電路板和印制電路板組件.設計和使用.連接方法(地面/共同的)考慮.總要求 |
(Printed boards and assemblies - Design and use - Attachment (land/joint) considerations - Attachment (land/joint) considerations - Generic requirements) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com