標準號 |
中文名稱 |
英文名稱 |
| EN 60684-3-209-2003 |
絕緣軟套管第3部分：個別型號套管規范活頁209：阻燃、收縮比率為2：1的熱收縮聚烯烴套管的通用用途 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded, shrink ratio 2:1 (IEC 60684-3-209:2003) / Note: Endorsement notice |
| EN 60684-3-211-2002 |
絕緣軟套管第3部分：個別型號套管規范活頁211：收縮比率為2：1的半硬式聚烯烴熱收縮套管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 (IEC 60684-3-211:2002) / Note: Endorsement notice |
| EN 60684-3-212-1998 |
絕緣軟套管第3部分：單型套管的特殊要求活頁212：.熱縮聚烯烴套管阻燃收縮比2：1 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 2:1 (IEC 60684-3-212:1998) |
| EN 60684-3-213-1999 |
絕緣軟套管第3部分：單型套管的特殊要求活頁213：熱縮聚烯烴套管不阻燃放收縮比2：1 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 213: Heat shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1 (IEC 60684-3-213:1998) |
| EN 60684-3-217-1998 |
絕緣軟管第3部分：單型套管的特殊要求活頁217：熱縮聚烯烴套管阻燃收縮比3：1 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 217: Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 3:1 (IEC 60684-3-217:1998) |
| EN 60684-3-218-1998 |
絕緣軟管第3部分：單型套管的特殊要求活頁218：.熱縮聚烯烴套管不阻燃手縮比3：1 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 218: Heat-shrinkable polyolefine sleeving, not flame retarded, shrink ratio 3:1 (IEC 60684-3-218:1998) |
| EN 60684-3-228-1998 |
絕緣軟管第3部分：各種型號軟管規范活頁228：熱縮半剛性聚偏二氟乙烯套管阻燃耐流體收縮率2：1 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-228:1998) |
| EN 60684-3-229-2003 |
絕緣軟套管第3部分：個別型號套管規范活頁229：：阻燃、防水、收縮比率為2：1的熱收縮半軟性聚編二氟乙 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible polyvinylidene fluoride sleeving, flame retarted, fluid resistant, shrink ratio 2:1 (IEC 60684-3-229:2003) / Note: Endorseme |
| EN 60684-3-233-1998 |
絕緣軟管第3部分各種型號套管的規范要求活頁２３３：熱收縮氟彈性體軟管阻燃耐流體收縮比２： |
Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-233:1998) |
| EN 60684-3-240 bis 243-2002 |
絕緣軟套管第3部分：個別型號套管規范活頁240至243：熱收縮聚四氟乙烯套管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 240 to 243: Heat-shrinkable PTFE sleeving (IEC 60684-3-240 to 243:2002) / Note: Endorsement notice |
| EN 60684-3-246-2002 |
絕緣軟管第3部分：各種型號套管的規范要求活頁２４６：聚烯烴不阻燃雙層壁熱收縮套管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 246: Heat-shrinkable polyolefin sleeving, dual-wall, not flame-retarded (IEC 60684-3-246:2001) |
| EN 60684-3-271-1998 |
絕緣軟管第3部分：各種型號套管的規范活頁271：熱收縮彈性軟管阻燃耐流體收縮比2：1 |
Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-271:1998) |
| EN 60684-3-272-1998 |
絕緣軟管第3部分：各種型號軟管規范 活頁272：熱收縮彈性軟管阻燃耐流體收縮比2：1薄壁 |
Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 272: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1, thin wall (IEC 60684-3-272:1998) |
| EN 60684-3-300-2002 |
絕緣軟套管第3部分：各種型號套管規范活頁300：無涂層的玻璃纖維編織套管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002) / Note: Endorsement notice |
| EN 60684-3-320-2002 |
絕緣軟套管第3部分：個別型號套管規范活頁320：輕度浸漬的聚對笨二甲酸乙二醇脂編織套管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated (IEC 60684-3-320:2002) / Note: Endorsement notice |
| EN 60684-3-340 bis 342-2003 |
絕緣軟套管第3部分：個別型號套管規范活頁340至342：膨脹辮形聚對笨二甲酸乙二醇脂編織套管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving (IEC 60684-3-340 to 342:2003) / Note: Endorsement notice |
| EN 60684-3-343 bis 345-2002 |
絕緣軟套管第3部分：個別型號套管規范活頁343至345：無涂層膨脹辮形乙烯氯三氟乙烯(E-CTFE)紡織套管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002) / Note: Endorsement notice |
| EN 60684-3-400 bis 402-2002 |
絕緣軟套管第3部分：各種型號套管規范活頁400至402：有硅橡膠涂層的玻璃纖維紡織套管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating (IEC 60684-3-400 to 402:2002) / Note: Endorsement notice |
| EN 60684-3-403 bis 405-2002 |
絕緣軟套管第3部分：各種型號套管規范活頁403-405：丙烯酸脂玻璃纖維編織套管 |
Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 403 to 405: Glass textile sleeving with acrylic based coating (IEC 60684-3-403 to 405:2002) / Note: Endorsement notice |
| EN 60684-3-406 bis 408-2003 |
絕緣軟套管第3部分：各種型號套管規范活頁406-408：有PVC涂層的玻璃纖維紡`織套管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 406 to 408: Glass textile sleeving with PVC coating (IEC 60684-3-406 to 408:2003) / Note: Endorsement notice |
| EN 60684-3-409-1999 |
絕緣軟套管第3部分：各種型號套管規范活頁409：聚胺脂(PUR)涂覆層的玻璃纖維軟管 |
Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating (IEC 60684-3-409:1999) |
| EN 60684-3-420 bis 422-2002 |
絕緣軟套管第3部分：個別型號套管規范活頁420至422：丙烯酸涂層的聚對笨二甲酸乙二醇脂編織套管 |
Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating (IEC 60684-3-420 to 422:2002) / Note: Endorsement notice |
| EN 60691-2003 |
熱熔斷體要求和應用指南 |
Thermal-links - Requirements and application guide (IEC 60691:2002) / Note: Endorsement notice |
| EN 60695-1-1-2000 |
著火危險試驗第1-1部分：電工產品著火危險評定指南總指南 |
Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines (IEC 60695-1-1:1999 + Corrigendum 2000) |
| EN 60695-1-30-2002 |
火災試驗第1-30部分：電工產品遭受火災的指南預選試驗程序的使用 |
Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products; Use of preselection testing procedures (IEC 60695-1-30:2002) / Note: Endorsement notice |
| EN 60695-10-2-2003 |
火災試驗第10-2部分：非正常熱力球壓試驗 |
Fire hazard testing - Part 10-2: Abnormal heat; Ball pressure test (IEC 60695-10-2:2003) / Note: Endorsement notice |
| EN 60695-10-3-2002 |
著火危害試驗第10-3部分：異常發熱鑄造磨具變形試驗 |
Fire hazard testing - Part 10-3: Abnormal heat; Mould stress relief distortion test (IEC 60695-10-3:2002) / Note: Endorsement notice |
| EN 60695-2-10-2001 |
火災危害試驗第2－10部分：基于灼熱／發熱絲的試驗方法灼熱絲設備及通用試驗程序 |
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods; Glow-wire apparatus and common test procedures (IEC 60695-2-10:2000) |
| EN 60695-2-11-2001 |
火災危害試驗第2－11部分：基于灼熱／發熱絲的試驗方法最終產物的灼熱絲易燃性試驗 |
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods; Glow-wire flammability test method for end-products (IEC 60695-2-11:2000) |
| EN 60695-2-12-2001 |
火災危害試驗第2－12部分：基于灼熱／發熱絲的試驗方法材料的灼熱絲易燃性試驗 |
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods; Glow-wire flammability test method for materials (IEC 60695-2-12:2000) |
| EN 60695-2-13-2001 |
火災危害試驗第2－13部分：基于灼熱／發熱絲的試驗方法材料的灼熱絲起燃性試驗 |
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods; Glow-wire ignitability test method for materials (IEC 60695-2-13:2000) |
| EN 60695-2-4/0-1993 |
火災危害試驗第2部分：試驗方法第4節／活頁0：擴散型和混合型火焰試驗方法 |
Fire hazard testing; Part 2: Test methods; Section 4/sheet 0: Diffusion type and premixed type flame test methods (IEC 60695-2-4/0:1991) |
| EN 60695-4-1995 |
著火危險試驗第4部分：著火試驗術語 |
Fire hazard testing - Part 4: Terminology concerning fire tests (IEC 60695-4:1993) |
| EN 60695-5-1-2003 |
著火危害試驗第5-1部分：火焰流出物的腐蝕損壞的評定一般指南 |
Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent; General guidance (IEC 60695-5-1:2002) / Note: Endorsement notice |
| EN 60695-6-1-2001 |
著火危害試驗第6－1部分：混濁煙一般指南 |
Fire hazard testing - Part 6-1: Smoke opacity; General guidance (IEC 60695-6-1:2001) |
| EN 60695-7-1-1995 |
著火危害試驗第7部分：將火中電器產品產生毒性危害降至最小的指南第1節：總則 |
Fire hazard testing - Part 7: Guidance on the minimization of toxic hazards due to fires involving electrotechnical products - Section 1: General (IEC 60695-7-1:1993) |
| EN 60695-7-1-2004 |
著火危險試驗.第7-1部分:燃燒廢氣的毒性.一般指南 |
|
| EN 60695-8-1-2001 |
著火危害試驗第8－1部分：釋放熱一般指南 |
Fire hazard testing - Part 8-1: Heat release; General guidance (IEC 60695-8-1:2001) |
| EN 60695-9-1-1999 |
著火危害試驗第9－1部分：火焰的表面擴展通用指南 |
Fire hazard testing - Part 9-1: Surface spread of flame - General guidance (IEC 60695-9-1:1998) |
| EN 607-1995 |
PVC-U制屋檐水槽和配件 定義、要求和測試 |
Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
| EN 607-2004 |
未增塑聚氯乙烯制屋檐溝和附件.定義、要求和檢驗 |
|
| EN 60702-1-2002 |
額定電壓750V及以下礦物絕緣電纜第1部分：電纜 |
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables (IEC 60702-1:2002) |
| EN 60702-2-2002 |
額定電壓750V及以下礦物絕緣電纜第2部分：終端 |
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations (IEC 60702-2:2002) |
| EN 60704-1-1997 |
家用和類似用途電器測定空中傳播噪聲的試驗規范第1部分：一般要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements (IEC 60704-1:1997) |
| EN 60704-2-1-2001 |
測定家用和類似電器發出的空氣傳播的噪聲的試驗規則第2-1部分：真空吸塵器的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners (IEC 60704-2-1:2000) / Note: Applies only in conjunction with EN 60704-1 (1997) |
| EN 60704-2-11-1999 |
測定家用和類似用途電器輻射氣載噪聲的試驗規范第2－11部分：電動食品加工機的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically operated food preparation appliances (IEC 60704-2-11:1998) |
| EN 60704-2-13-2000 |
家用和類似用途電器測定空中傳播噪聲的試驗規范第2－13部分：排油煙機的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods (IEC 60704-2-13:2000) |
| EN 60704-2-2-1994 |
測定家用和類似電器發出的空氣傳播的噪聲的試驗規范第２－２部分：強制對電流加熱器的特殊要求 |
Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 2-2: Particular requirements for forced draught convection heaters (IEC 60704-2-2:1985) |
| EN 60704-2-3-2002 |
測定家用和類似用途電器輻射氣載噪聲的試驗規范第2－3部分：洗碗機特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers (IEC 60704-2-3:2001) |
| EN 60704-2-4-2001 |
測定家用和類似用途電器輻射氣載噪聲的試驗規范第2－4部分：洗衣機和離心式脫水機的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors (IEC 60704-2-4:2001) / Note: Applies only in conjunction with EN 60704 |
| EN 60704-2-5-1994 |
測定家用和類似用途電器具輻射噪聲的試驗規范第２－５部分：儲熱式房間電暖器的特殊要求 |
Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 2-5: Particular requirements for room heaters of the storage type (IEC 60704-2-5:1989) |
| EN 60704-2-6-1995 |
測定家用和類似用途電器輻射氣載噪聲的試驗規范第2－6部分：滾筒式干衣機的特殊要求 |
Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 2: Particular requirements for tumble-dryers (IEC 60704-2-6:1994) |
| EN 60704-2-6-2004 |
家用和類似用途的電器.空中傳播噪聲測定的試驗規范.第2-6部分:滾筒式干衣機的特殊要求 |
|
| EN 60704-2-7-1998 |
測定家用和類似用途電器輻射氣載噪聲的試驗規范第2－7部分：電風扇的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7: Particular requirements for fans (IEC 60704-2-7:1997) |
| EN 60704-2-8-1997 |
家用及類似用途電氣裝置發出空氣噪聲測定的試驗規范第2－8部分：電動剃須刀的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers (IEC 60704-2-8:1997) |
| EN 60704-2-9-2003 |
家用和類似用途電器測定噪聲的試驗方法第2-9部分：電護發器的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-9: Particular requirements for electric hair care appliances (IEC 60704-2-9:2003) / Note: Endorsement notice |
| EN 60704-3-1994 |
家用和類似用途電器輻射氣載噪聲的測定用試驗規范第3部分：測量和檢驗宣稱噪聲發出值的規程 |
Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 3: Procedure for determining and verifying declared noise emission values (IEC 60704-3:1992) |
| EN 60705-1999 |
家用微波爐性能的測試方法 |
Household microwave ovens - Methods for measuring performance (IEC 60705:1999) |
| EN 60707-1999 |
固體非金屬材料暴露于火焰源的可燃性試驗方法清單 |
Flammability of solid non-metallic materials when exposed to flame sources - List of test methods (IEC 60707:1999) |
| EN 60715-2001 |
低壓開關設備和控制設備尺寸開關設備和控制設備成套裝置中電氣器件在機械支撐導軌上的標準化安裝 |
Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations (IEC 60715:1981 + A1:1995) |
| EN 60719-1993 |
額定電壓達450/750V及以下圓形銅導線電纜的平均外形尺寸上下限的計算 |
Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V (IEC 60719:1992) |
| EN 60721-3-0-1993 |
環境條件分級第3－0部分：環境參數組及其嚴酷程度的分級導言 |
Classification of environmental conditions; part 3: classification of groups of environmental parameters and their severities; introduction (IEC 60721-3-0:1984 + A1:1987) |
| EN 60721-3-1-1997 |
環境條件分類第3部分：:環境參數及其嚴酷程度分類第1節：儲藏 |
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 1: Storage (IEC 60721-3-1:1997) |
| EN 60721-3-2-1997 |
環境條件分類第3部分：環境參數組及其嚴酷程度分類 第2節：運輸 |
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation (IEC 60721-3-2:1997) |
| EN 60721-3-5-1997 |
環境條件分類第3部分：.環境參數組及其嚴酷程序分類第5節：地面車輛裝置 |
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations (IEC 60721-3-5:1997) |
| EN 60726-2003 |
干式電力變壓器 |
Dry-type power transformers (IEC 60726:1982 + A1:1986, modified) |
| EN 60730-1-1991 |
家用和類似用途自動電氣控制第1部分：通用要求 |
Automatic electrical controls for household and similar use; part 1: general requirements |
| EN 60730-1/prA1-2003 |
家用和類似用途用的電氣自動電控制器第１部分：一般要求 修改草案１ |
IEC 60730-1 A1, Ed. 3: Automatic electrical controls for household and similar use - Part 1: General requirements |
| EN 60730-1/prAA-2002 |
家用和類似用途用的電氣自動電控制器第１部分：一般要求 修改草案ＡＡ |
Automatic electrical controls for household and similar use - Part 1: General requirements; Amendment AA |
| EN 60730-2-1-1997 |
家用和類似用途的自動電控制器規范第2部分：特殊要求第1節：家用電器控制器 |
Automatic electrical controls for household and similar use - Part 2: Particular requirements for electrical controls for electrical household appliances (IEC 60730-2-1:1989, modified) |
| EN 60730-2-18-1999 |
家用和類似用途的電氣自動化控制器2-18部分：家用和類似用途浮子式水位電氣自動控制器的特殊要求 修改２ |
Automatic electrical controls for household and similar use - Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements (IEC 60730-2-18:1997, modified) |
| EN 60730-2-19-2002 |
家用和類似用途的電氣自動化控制器 2-19部分：電動油閥的特殊要求（包括機械要求） |
Automatic electric controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements (IEC 60730-2-19:1997 + A1:2000, modified) |
| EN 60730-2-2-2002 |
家用和類似用途的電氣自動控制器第２－２部分：電動機熱保護器的特殊要求 |
Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors (IEC 60730-2-2:2001, modified) |
| EN 60730-2-5-2002 |
家用和類似用途的電氣自動控制器第２－５部分：燃燒器電氣自動控制系統的特殊要求 |
Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems (IEC 60730-2-5:2000, modified) / Note: Endorsement notice |
| EN 60730-2-8-2002 |
家用和類似用途的電氣自動控制器 第２－８部分：電動水閥的特殊要求包括機械要求 |
Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements (IEC 60730-2-8:2000, modified) / Note: Endorsement notice |
| EN 60730-2-9-2002 |
家用和類似用途的電氣自動控制器第２－９部分：溫度敏感控制器的特殊要求 |
Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls (IEC 60730-2-9:2000, modified) / Note: Endorsement notice |
| EN 60734-2003 |
家用電器 性能 硬水試驗 |
Household electrical appliances - Performance - Hard water testing (IEC 60734:2001) / Note: Endorsement notice |
| EN 60735-1991 |
錄象帶性能的測量方法 |
Measuring methods for video tape properties (IEC 60735:1991) |
| EN 60738-1-1-1999 |
熱敏電阻直熱式階躍型正溫度系數第１－１部分：空白詳細規范：限流應用評定級EZ |
Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ (IEC 60738-1-1:1998) |
| EN 60738-1-1999 |
熱敏電阻直熱式階躍型正溫度系數第１部分：一般規范 |
Thermistors - Directly heated positive step-function temperature coefficient - Part 1: Generic specification (IEC 60738-1:1998) |
| EN 60738-1-2-1999 |
熱敏電阻直熱式階躍型正溫度系數第１－２部分：空白詳細規范加熱件應用評定級EZ |
Thermistors - Directly heated positive step-function temperature coefficient - Part 1-2: Blank detail specification - Heating element application - Assessment level EZ (IEC 60738-1-2:1998) |
| EN 60738-1-3-1999 |
熱敏電阻直熱式階躍型正溫度系數第１－２部分：空白詳細規范浪涌電流應用評定水平EZ |
Thermistors - Directly heated positive step-function temperature coefficient - Part 1-3: Blank detail specification - Inrush current application - Assessment level EZ (IEC 60738-1-3:1998) |
| EN 60738-1-4-1999 |
熱敏電阻直熱式階躍型正溫度系數第１－２部分：空白詳細規范敏感作用評定水平EZ |
Thermistors - Directly heated positive step-function temperature coefficient - Part 1-4: Blank detail specification - Sensing application - Assessment level EZ (IEC 60738-1-4:1998) |
| EN 60743-2001 |
帶電作業用工具和設備術語 |
Live working - Terminology for tools, equipment and devices (IEC 60743:2001) |
| EN 60745-1-2003 |
手持式電動工具安全第1部分：通用要求 |
Hand-held motor-operated electric tools - Safety - Part 1: General requirements (IEC 60745-1:2001, modified) |
| EN 60745-2-1-2003 |
手持電動工具安全第2-1部分：鉆和沖擊鉆的特殊要求 |
Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills (IEC 60745-2-1:2003, modified) |
| EN 60745-2-11-2003 |
手持電動工具安全第2-10部分：往復鋸（線鋸和刀鋸）的特殊要求 |
Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jigs and sabre saws) (IEC 60745-2-11:2003, modified) |
| EN 60745-2-14-2003 |
手持電動工具安全第2-14部分：刨機的特殊要求 |
Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers (IEC 60745-2-14:2003, modified) |
| EN 60745-2-17-2003 |
手持電動工具安全第2-17部分：刳刨機和修剪機的特殊要求 |
Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers (IEC 60745-2-17:2003, modified) |
| EN 60745-2-18-2004 |
手持式電動工具.安全.第2-18部分:捆扎工具的特殊要求 |
|
| EN 60745-2-2-2003 |
手持電動工具安全第2-2部分：改錐和套筒扳手的特殊要求 |
Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches (IEC 60745-2-2:2003, modified) |
| EN 60745-2-20-2003 |
手持式電動工具安全第2-20部分：帶鋸的特殊要求 |
Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws (IEC 60745-2-20:2003, modified) |
| EN 60745-2-4-2003 |
手持電動工具安全第2-4部分：除圓盤型以外的磨光機和拋光機的特殊要求 |
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type (IEC 60745-2-4:2002, modified) |
| EN 60745-2-5-2003 |
手持電動工具安全第2-5部分：圓形鋸的特殊要求 |
Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws (IEC 60745-2-5:2003, modified) |
| EN 60745-2-6-2003 |
手持電動工具安全第2-6部分：鐵錘的特殊要求 |
Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers (IEC 60745-2-6:2003, modified) |
| EN 60745-2-8-2003 |
手持電動工具安全第2-8部分：剪床和步?jīng)_輪廓機的特殊要求 |
Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers (IEC 60745-2-8:2003, modified) |
| EN 60745-2-9-2003 |
手持電動工具安全第2-9部分：攻絲機的特殊要求 |
Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers (IEC 60745-2-9:2003, modified) |
| EN 60746-1-2003 |
電化學分析器性能表示第1部分：總則 |
Expression of performance of electrochemical analyzers - Part 1: General (IEC 60746-1:2003) / Note: Endorsement notice |
| EN 60746-2-2003 |
電化學分析器性能表示第2部分： pH 值 |
Expression of performance of electrochemical analyzers - Part 2: pH value (IEC 60746-2:2003) / Note: Endorsement notice |
| EN 60746-3-2002 |
電化學分析器性能表示第3部分：電解導電率 |
Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity (IEC 60746-3:2002) / Note: Endorsement notice |
| EN 60747-15-2004 |
分立半導體器件.第15部分:獨立電力半導體器件 |
|
| EN 60747-16-1-2002 |
半導體器件第１６－１部分：微波集成電路放大器 |
Semiconductor devices - Part 16-1: Microwave integrated circuits; Amplifiers (IEC 60747-16-1:2001) |
| EN 60747-16-3-2002 |
半導體器件第16-3部分：微波集成電路頻率轉換器 |
Semiconductor devices - Part 16-3: Microwave integrated circuits; Frequency converters (IEC 60747-16-3:2002) / Note: Endorsement notice |
| EN 60749-1-2003 |
半導體器件機械和氣候試驗方法第1部分：總則 |
Semiconductor devices - Mechanical and climatic test methods - Part 1: General (IEC 60749-1:2002) / Note: Endorsement notice |
| EN 60749-10-2002 |
半導體器件機械和氣候試驗方法第10部分：機械震動 |
Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock (IEC 60749-10:2002) / Note: Endorsement notice |
| EN 60749-11-2002 |
半導體器件機械和氣候試驗方法第11部分：溫度的快速變化雙液槽法 |
Semiconductor devices - Mechanical and climatic test methods - Part 11: Rapid change of temperature; Two-fluid-bath method (IEC 60749-11:2002) / Note: Endorsement notice |
| EN 60749-12-2002 |
半導體器件機械和氣候試驗方法第12部分：振動、振動頻率 |
Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibrations, variable frequency (IEC 60749-12:2002) / Note: Endorsement notice |
| EN 60749-13-2002 |
半導體器件機械和氣候試驗方法第13部分：鹽質氣氛 |
Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere (IEC 60749-13:2002) / Note: Endorsement notice |
| EN 60749-14-2003 |
半導體器件機械和氣候試驗方法 第14部分：終結時的耐用性（鉛的完整性） |
Semiconductor devices - Mechanical and climatic test methods - Part 14: Robustness of terminations (lead integrity) (IEC 60749-14:2003) / Note: Endorsement notice |
| EN 60749-15-2003 |
半導體器件機械和氣候試驗方法 第15部分：透孔安裝設備對焊接溫度的阻抗 |
Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices (IEC 60749-15:2003) / Note: Endorsement notice |
| EN 60749-16-2003 |
半導體器件機械和氣候試驗方法 第16部分：粒子碰撞噪聲檢測 |
Semiconductor devices - Mechanical and climatic test methods - Part 16: Particle impact noise detection (PIND) (IEC 60749-16:2003) / Note: Endorsement notice |
| EN 60749-17-2003 |
半導體器件機械和氣候試驗方法 第17部分：中子輻照 |
Semiconductor devices - Mechanical and climatic test methods - Part 17: Neutron irradiation (IEC 60749-17:2003) / Note: Endorsement notice |
| EN 60749-18-2003 |
半導體器件機械和氣候試驗方法 第18部分：致電離輻射（總量） |
Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose) (IEC 60749-18:2002) / Note: Endorsement notice |
| EN 60749-19-2003 |
半導體器件機械和氣候試驗方法 第19部分：沖模切變強度試驗 |
Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength test (IEC 60749-19:2003) / Note: Endorsement notice |
| EN 60749-2-2002 |
半導體器件機械和氣候試驗方法第2部分：低氣壓 |
Semiconductor devices - Mechanical and climatic test methods - Part 2: Low air pressure (IEC 60749-2:2002) / Note: Endorsement notice |
| EN 60749-20-2003 |
半導體器件機械和氣候試驗方法 第20部分：用塑料封裝的半導體磁場探測器對潮濕和焊熱結合效應的阻抗 |
Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic-encapsulated SMDs to the combined effect of moisture and soldering heat (IEC 60749-20:2002) / Note: Endorsement notice |
| EN 60749-22-2003 |
半導體器件機械和氣候試驗方法 第22部分：粘結強度 |
Semiconductor devices - Mechanical and climatic test methods - Part 22: Bond strength (IEC 60749-22:2002) / Note: Endorsement notice |
| EN 60749-23-2004 |
半導體器件.機械和氣候試驗方法.第23部分:高溫操作壽命 |
|
| EN 60749-24-2004 |
半導體器件.機械和氣候試驗方法.第24部分:加速抗?jié)裥?無偏HAST |
|
| EN 60749-25-2003 |
半導體器件機械和氣候試驗方法 第25部分：溫度周期變化 |
Semiconductor devices - Mechanical and climatic test methods - Part 25: Temperature cycling (IEC 60749-25:2003) / Note: Endorsement notice |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com