標準號 |
中文名稱 |
英文名稱 |
| prEN 1222-1993 |
衛生用具 抗刮傷性的測定 |
Sanitary appliances; determination of the resistance to scratching |
| prEN 122210-1993 |
分規范：射頻同軸連接器N系列 |
Sectional specification: Radio frequency coaxial connectors-series N (CECC 22210:1993) |
| prEN 122220-1993 |
分規范：射頻同軸連接器MCX系列 |
Sectional specification: Radio frequency coaxial connectors-series MCX (CECC 22220:1993) |
| prEN 122230-1993 |
分規范射頻同軸連接器1.0/2.3系列 |
Sectional specification; Radio frequency coaxial connectors-serie 1,0/2,3 (CECC 22230:1993) |
| prEN 122240-1993 |
分規范射頻同軸連接器1.6/5.6系列 |
Sectional specification; Radio frequency coaxial connectors-serie 1,6/5,6 (CECC 22240:1993) |
| prEN 122250-1993 |
分規范：射頻同軸連接器1.4/1.4系列 |
Sectional specification: Radio frequency coaxial connectors-series 1,4/1,4 (CECC 22250:1993) |
| prEN 1223-1993 |
衛生用具 抗裂紋性的測定 |
Sanitary appliances; determination of the resistance to crazing |
| prEN 122300-1994 |
分規范：射頻連接器SMZ系列 |
Sectional specification: Radio frequency connectors-series SMZ |
| prEN 122310-1993 |
分規范：射頻同軸連接器E系列 |
Sectional specification: Radio frequency coaxial connectors-series E |
| prEN 122320-1993 |
分規范：射頻同軸連接器9.52系列 |
Sectional specification: Radio frequency coaxial connectors- series 9,52 |
| prEN 12235-1995 |
運動場表面垂直球體性能的測定 |
Surfaces for sports areas - Determination of vertical ball behaviour |
| prEN 1224-1993 |
衛生用具 抗吸水性的測定 |
Sanitary appliances; determination of water absorption |
| prEN 12247-1995 |
平板架用木材質量的測定 |
Determination of the quality of timber in pallets |
| prEN 12255-14-2003 |
廢水處理廠第14部分：消毒 |
Wastewater treatment plants - Part 14: Disinfection |
| prEN 12255-15-2003 |
廢水處理 廠第15部分：活性污泥曝氣池中清水中氧傳送的測量 |
Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in activated sludge aeration tanks |
| prEN 12255-2-1995 |
廢水處理廠第2部分：生廢水泵送裝置的性能要求 |
Wastewater treatment plants - Part 2: Performance requirements of raw wastewater pumping installations |
| prEN 12258-2-2001 |
鋁和鋁合金術語和定義第2部分：化學分析 |
Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis |
| prEN 12259-10-1999 |
固定消防系統噴水器和噴水系統構件第10部分：多路控制器 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 10: Multiple controls |
| prEN 12259-11-2000 |
固定消防系統噴水器和噴水系統構件第11部分：中速和高速噴水器 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 11: Medium and high velocity water sprayers |
| prEN 12259-12-2000 |
固定消防系統噴水器和噴水系統構件第12部分：灑水器泵 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 12: Sprinkler pumps |
| prEN 12259-9-1999 |
固定消防系統噴水器和噴水系統構件第9部分：集水閥 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 9: Deluge valves |
| prEN 12266-3-1995 |
工業閥門交貨技術條件第3部分：試驗程序和驗收標準 |
Industrial valves - Technical conditions of delivery - Part 3: Test procedures and acceptance criteria |
| prEN 12269-2-2003 |
用“壓梁試驗”測定鋼筋與熱壓加氣混凝土之間的粘結性能第2部分：長期試驗 |
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test |
| prEN 12271-10-2002 |
地面修整規范第10部分：工廠生產控制 |
Surface dressing - Specifications - Part 10: Factory production control |
| prEN 12271-2-1999 |
地面修整規范第2部分：碎屑 |
Surface dressing - Specifications - Part 2: Chippings |
| prEN 12271-4-1999 |
地面修整規范第4部分：缺陷目測 |
Surface dressing - Specifications - Part 4: Visual assessment of defects |
| prEN 12274-7-2001 |
泥漿表面處理試驗方法第7部分：測定用礦料制作泥漿混合物的適用性的搖動磨損試驗 |
Slurry surfacing - Test methods - Part 7: Shaking abrasion test on suitability of mineral aggregates to slurry mixes |
| prEN 12274-8-2001 |
泥漿表面處理試驗方法第8部分：目測 |
Slurry surfacing - Test methods - Part 8: Visual assessment |
| prEN 12285-2-2001 |
工廠預制金屬罐第2部分：用于地下貯存易燃和不易燃水污染液的柱形單層皮和雙層皮臥式罐 |
Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
| prEN 123000-1997 |
通用規范：印制電路板 |
Generic specification: Printed boards |
| prEN 123100-1998 |
分規范具有非金屬化孔的單面和雙面印制板 |
Sectional specification - Single and double-sided printed boards with plain holes |
| prEN 12312-10-1997 |
航空地面輔助設備特殊要求第10部分：集裝箱平板架輸送機 |
Aircraft ground support equipment - Specific requirements - Part 10: Container/pallet transfer transporters |
| prEN 12312-11-1997 |
航空地面輔助設備特殊要求第11部分：集裝箱平臺車和散貨拖車 |
Aircraft ground support equipment - Specific requirements - Part 11: Container/pallet dollies and loose load trailers |
| prEN 12312-16-1999 |
航空地面輔助設備特殊要求第16部分：空氣起動設備 |
Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment |
| prEN 12312-17-1999 |
航空地面輔助設備特殊要求第17部分：空調裝置 |
Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment |
| prEN 12312-18-1999 |
航空地面輔助設備特殊要求第18部分：制氧/氮機 |
Aircraft ground support equipment - Specific requirements - Part 18: Oxygen/Nitrogen units |
| prEN 12312-19-1999 |
航空地面輔助設備特殊要求第19部分：飛機起重器、軸式起重器和液壓尾柱 |
Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions |
| prEN 12312-5-1997 |
航空地面輔助設備特殊要求第5部分：飛機加油機、消防龍頭配水器和加油設備 |
Aircraft ground support equipment - Specific requirements - Part 5: Aircraft refuellers, hydrant dispensers and fuelling equipment |
| prEN 12312-6-1997 |
航空地面輔助設備特殊要求第6部分：除冰機和除冰設備 |
Aircraft ground support equipment - Specific requirements - Part 6: Deicers, deicing equipment |
| prEN 12312-7-1997 |
航空地面輔助設備特殊要求第7部分：飛機移動設備 |
Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equipment |
| prEN 12312-8-1997 |
航空地面輔助設備特殊要求第8部分：維修梯和平臺 |
Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms |
| prEN 12312-9-1998 |
航空地面輔助設備特殊要求第9部分：集裝箱平板架裝載機 |
Aircraft ground support equipment - Specific requirements - Part 9: Container/pallet loaders |
| prEN 123200-1998 |
分規范帶有金屬化孔的單面和雙面印制板 |
Sectional specification - Single and double-sided printed boards with plated-through holes |
| prEN 12326-1-2003 |
不連續屋頂及覆蓋層用石板和石材第1部分：產品規范 |
Slate and stone products for discontinuous roofing and cladding - Part 1: Product specification |
| prEN 123300-1998 |
分規范多層印制板 |
Sectional specification - Multilayer printed boards |
| prEN 12331-2003 |
食品加工機械切碎機安全和衛生要求 |
Food processing machinery - Mincing machines - Safety and hygiene requirements |
| prEN 12336-1996 |
隧道機械盾構、水平推進機和內層安裝設備安全要求 |
Tunneling machines - Shield machines, horizontal thrustboring machines, lining erection equipment - Safety requirements |
| prEN 12337-2-2001 |
建筑物玻璃化學加強堿石灰硅酸鹽玻璃第2部分：合格評定 |
Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity |
| prEN 12354-6-2003 |
建筑聲學根據構件性能評定建筑物的聲學特性第6部分：封閉空間的吸聲 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces |
| prEN 12366-1996 |
聲學手持式非電動工具噪聲測試規程工程法（二級） |
Acoustics - Noise test code for hand-held non-electric power tools - Engineering method (grade 2) |
| prEN 12367-1996 |
便攜式滅火器的維護 |
Maintenance for portable fire extinguishers |
| prEN 12385-10-2003 |
鋼絲繩安全性 第10部分：一般建筑設備用扭絞繩 |
Steel wire ropes - Safety - Part 10: Spiral ropes for general structural appliances |
| prEN 12385-6-2003 |
鋼絲繩安全性第6部分：礦井用多股絞合繩 |
Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts |
| prEN 12387-1996 |
鞋、皮革和人造革制品加工機械標準尺寸鞋修理設備安全要求 |
Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements |
| prEN 12389-1-1996 |
建筑聲學根據產品性能評定建筑物的聲學特性 第1部分：房間之間空氣隔聲 |
Building acoustics - Estimation of acoustic performance of building from the performance of products - Part 1: Airborne sound insulation between rooms |
| prEN 12390-9-2002 |
硬化混凝土試驗 第9部分：抗凍融性定標 |
Testing hardened concrete - Part 9: Freeze-thaw resistance; Scaling |
| prEN 12391-1-2003 |
煙囪金屬煙囪和內襯的制作 第1部分：系統煙囪 |
Chimeneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances |
| prEN 12391-2-1996 |
煙囪金屬煙囪和內襯的制作 第2部分：重內襯砌 |
Chimneys - Execution of metal chimneys and liners - Part 2: Relining |
| prEN 12391-2000 |
煙囪金屬煙囪執行標準 |
Chimneys - Metal chimneys - Execution standard |
| prEN 12391-3-1996 |
煙囪金屬煙囪和內襯的制作 第3部分：專用煙囪 |
Chimneys - Execution of metal chimneys and liners - Part 3: Custom built chimneys |
| prEN 12397-1996 |
索道乘運安全要求運行 |
Safety requirements for passenger transportation by rope - Operation |
| prEN 12408-1996 |
乘運索道的安全要求質量控制 |
Safety requirements for cableways for passenger transportation by rope - Quality control |
| prEN 12411-1-1996 |
工廠環境直接探測有毒氣體和蒸氣及直接測量其濃度的電子設備 第1部分：一般要求和試驗方法 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods |
| prEN 12411-2-1996 |
工廠環境直接探測有毒氣體和蒸氣及直接測量其濃度的電子設備 第2部分：用于測量極限值范圍內濃度的設 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the range of limit values |
| prEN 12411-3-1996 |
工作場所的氣體直接探測有毒氣體和蒸氣直接測量其濃度用的電氣儀表 第3部分：用于測量遠大于極限值的 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of polluting gases and vapours - Part 3: Performance requirements for apparatus used for measuring concentrations well above limit values |
| prEN 12411-4-1997 |
工作場所的氣體工廠環境直接探測有毒氣體和蒸氣及直接測量其濃度的電子設備 第4部分：選擇、安裝、 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance |
| prEN 12412-1996 |
窗和門熱傳導經校準和保護熱箱法 |
Windows and doors - Thermal transmittance - Calibrated and guarded hot box method |
| prEN 12441-7-2003 |
鋅和鋅合金化學分析第7部分：用原子吸收光譜/氫化物產生法測定錫 |
Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin; Flame atomic absorption spectrometric method after extraction |
| prEN 12441-8-2002 |
鋅和鋅合金化學分析第8部分：用電感耦合等離子原子發射光譜測定鉛、鐵和鋁 |
Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc; Flame atomic absorption spectrometric method |
| prEN 12456-1996 |
低溫容器真空絕熱低溫容器外套的壓力保護裝置 |
Cryogenic vessels - Pressure protection devices for vacuum insulated cryogenic vessels outer jackets |
| prEN 12457-1996 |
廢物特性浸出粒狀廢料浸出符合性試驗粒狀廢料和殘渣成分浸出的測定 |
Characterization of waste - Leaching - Compliance test for leaching of granular waste materials - Determination of the leaching of constituents from granular waste materials and sludges |
| prEN 12463-1996 |
食品處理機械填充機和輔助機械安全和衛生要求 |
Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| prEN 1247-2003 |
鑄造機械 鐵水色澆鑄設備 離心鑄造機械 連續和半連續鑄造機械的安全要求 |
Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines |
| prEN 12488-2003 |
建筑玻璃裝配規定玻璃裝配系統和裝配要求 |
Glass in building - Glazing requirements - Assembly rules |
| prEN 12494-1996 |
建筑構件和部件面對面間耐熱阻的現場測量 |
Building components and elements - In-situ measurement of the surface-to-surface thermal resistance |
| prEN 12502-1-2001 |
金屬材料的防腐輸水系統中的可能出現的腐蝕第1部分：總則 |
Protection of metallic materials against corrosion - Corrosion likelihood in water conveying systems - Part 1: General |
| prEN 12502-2-2001 |
金屬材料的防腐輸水系統中的可能出現的腐蝕第２部分：銅和銅合金影響因素的評價 |
Protection of metallic materials against corrosion - Corrosion likelihood in water conveying systems - Part 2: Review of the influencing factors for copper and copper alloys |
| prEN 12502-3-2001 |
金屬材料的防腐輸水系統中的可能出現的腐蝕第３部分：熱浸鍍鋅鋼鐵材料影響因素的評價 |
Protection of metallic materials against corrosion - Corrosion likelihood in water - Part 3: Review of the influencing factors for hot dip galvanised ferrous materials |
| prEN 12502-4-2001 |
金屬材料的防腐輸水系統中的可能出現的腐蝕第４部分：不銹鋼影響因素的評價 |
Protection of metallic materials against corrosion - Corrosion likelihood in water conveying systems - Part 4: Review of the influencing factors for stainless steels |
| prEN 12502-5-2001 |
金屬材料的防腐輸水系統中的可能出現的腐蝕第５部分：鑄鐵鑄鐵、非合金鋼和低合金鋼影響因素的評價 |
Protection of metallic materials against corrosion - Corrosion likelihood in water conveying systems - Part 5: Review of influencing factors for cast iron, unalloyed and low alloyed steels |
| prEN 12504-3-2003 |
結構用混凝土試驗第３部分：拔拉力的測定 |
Testing concrete in structures - Part 3: Determination of pull-out force |
| prEN 12516-1-2000 |
工業閥門殼體設計強度第1部分：鋼閥門殼體的列表法 |
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| prEN 12516-2-2000 |
工業閥門殼體設計強度第２部分：鋼閥門殼體的計算法 |
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
| prEN 12519-2003 |
門和窗專業名詞 |
Windows and pedestrian doors - Terminology |
| prEN 1253-5-2003 |
建筑物排水裝置 第5部分：封閉的輕流體排水裝置要求和試驗方法 |
Gullies for buildings - Part 5: Gullies with light liquids closure |
| prEN 125300-1994 |
分規范：電源用磁性氧化磁芯 |
Sectional specification: magnetic oxide cores for power applications (CECC 25300:1980) |
| prEN 12560-6-2003 |
法蘭和其接頭指定等級的法蘭墊片第６部分：鋼法蘭用有鋸齒的金屬墊片 |
Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for uses with steel flanges |
| prEN 12560-7-2001 |
法蘭和其接頭指定等級的法蘭墊片第７部分：鋼法蘭用有金屬套的墊片 |
Flanges and their joints - Dimensions of gaskets for Class designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges |
| prEN 12561-7-2003 |
鐵路設備油罐車第７部分：平臺和梯子 |
Railway applications - Tank wagons - Part 7: Platforms and ladders |
| prEN 12561-8-2003 |
鐵路設備油罐車第８部分：供暖連接機構 |
Railway applications - Tank wagons - Part 8: Heating connections |
| prEN 12565-2000 |
加纖水泥管線的靜態計算指南 |
Guidelines for static calculation of fibre-cement pipelines |
| prEN 12566-3-2001 |
５０ＰＴ以下小型廢水處理系統第3部分：裝配式的和／或現場安裝的家庭廢水處理設備 |
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
| prEN 12577-1996 |
土壤改良劑和生長培養基標記 |
Soil improvers and growing media - Labelling |
| prEN 12578-1996 |
土壤改良劑和生長培養基規范產品目錄 |
Soil improvers and growing media - Specifications - Product schedules |
| prEN 12581-1996 |
涂敷設備有機液體涂料涂敷用浸漬和電泳涂敷機械安全要求 |
Coating plants - Dip and electrophoretic coating machinery for application of organic liquid coating materials - Safety requirements |
| prEN 12602-1996 |
經過熱壓處理的加氣混凝土預制增強構件 |
Prefabricated reinforced components of autoclaved aerated concrete |
| prEN 12609-1996 |
混凝土攪拌車安全要求 |
Truck mixers - Safety requirements |
| prEN 126100-1991 |
分規范：用于能力批準的符合質量評定要求的電子設備用信號變壓器 |
Sectional specification: signal transformers of assessed quality for use in electronic equipment for capability approval |
| prEN 12614-2003 |
混凝土結構防護和修理用制品和裝置試驗方法聚合物玻璃轉變溫度的測定 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers |
| prEN 12618-2-2003 |
混凝土結構防護及修理用產品和裝置 試驗方法有或沒有熱循環的灌注產品的附著力測定第2部分：拉伸粘合 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling; Adhesion by tensile bond strength |
| prEN 12618-3-2003 |
混凝土結構防護及修理用產品和裝置 試驗方法有或沒有熱循環的灌注產品的附著力測定第3部分：斜剪切法 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling; Slant shear method |
| prEN 1262-2003 |
表面活性劑 溶解和彌散的pH值的測定 |
Surface active agents - Determination of pH value of solutions or dispersions / Note: Intended as replacement for EN 1262 (1996-07). |
| prEN 126200-1991 |
分規范：用于能力批準的符合質量評定要求的電子設備用電源變壓器 |
Sectional specification: power transformers of assessed quality for use in electronic equipment for capability approval |
| prEN 12621-1996 |
涂料壓力輸送和或供給機械安全要求 |
Machinery for the supply and/or circulation of coating materials under pressure - Safety requirements |
| prEN 12624-1996 |
工業、商業和汽車庫大門和活動門操作噪聲要求和試驗方法 |
Industrial, commercial and garage doors and gates - Operational noise - Requirements and test methods |
| prEN 12629-5-1998 |
制作混凝土和硅酸鈣結構產品的設備安全性第５部分：制管機械 |
Machines and plants for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5: Pipe making machines |
| prEN 12629-6-1999 |
制作混凝土和硅酸鈣結構產品的設備安全性第６部分：制作預制增強制品用的固定和移動設備 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
| prEN 12629-7-2003 |
制作混凝土和硅酸鈣結構產品的設備安全性第７部分：在工作臺上制作預應力制品的固定和移動設備 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for the benched manufacture of prestressed products |
| prEN 126300-1991 |
分規范：用于能力批準的符合質量評定要求的電子設備的開關模式供電設備用電源變壓器 |
Sectional specification: power transformers of assessed quality for switched mode power supplies (SMPS) for use in electronic equipment for capability approval |
| prEN 12637-1-2003 |
混凝土結構防護和修理用的制品和裝置試驗方法灌注制品的相容性第1部分：與混凝土的相容性 |
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete |
| prEN 12637-3-2003 |
混凝土結構防護和修理用的制品和裝置試驗方法灌注制品的相容性第3部分：灌注產品對人造橡膠的影響 |
Products and systems for the protection and repair of concrete structures - Test methods; Compatibility of injection products - Part 3: Effect of injection products on elastomers |
| prEN 12638-1996 |
地板鋸條、開槽機和銑床安全 |
Floor sawing, grooving and milling machines - Safety |
| prEN 126400-1991 |
分規范：用于能力批準的符合質量評定要求的電子設備用脈沖變壓器 |
Sectional specification: pulse transformers of assessed quality for use in electronic equipment for capability approval |
| prEN 12644-3-1997 |
起重機安全檢驗和使用要求第3部分：使用的適合性 |
Cranes - Safety - Requirements for inspection and use - Part 3: Fitness for purpose |
| prEN 12649-1996 |
混凝土壓實機械和抹平機械安全要求 |
Concrete compactors and floating machines - Safety requirements |
| prEN 12650-1-1996 |
建筑五金電動人行門第1部分：制品要求和試驗方法 |
Building hardware - Powered pedestrian doors - Part 1: Product requirements and test methods |
| prEN 12650-2-1996 |
建筑五金電動人行門第２部分：電動人行門的安全 |
Building hardware - Powered pedestrian doors - Part 2: Safety at powered pedestrian doors |
| prEN 126500-1991 |
分規范：用于能力批準的符合質量評定要求的電子設備用感應器 |
Sectional specification: inductors of assessed quality for use in electronic equipment for capability approval |
| prEN 12651-1996 |
制陶機械安全細粘土磚的分選和釉料 |
Ceramic machines - Safety - Sorting and glazing of fine clay tiles |
| prEN 12652-1996 |
工業、商業和汽車庫大門和活動門減少噪音要求和試驗方法 |
Industrial, commercial and garage doors and gates - Sound reduction - Requirements and test methods |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com