標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 15011-2-2003 |
焊接和相關工藝中的保健和安全.對電弧焊產生的煙塵和氣體取樣的實驗室方法.第2部分:除臭氧外氣體的排放率的 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2: Determination of emission rates of gases, except ozone (ISO 15011-2:2003); German version EN ISO 15011-2:2003) |
| DIN EN ISO 15011-3-2003 |
焊接和相關工藝的健康和安全.電弧焊產生的煙和氣體取樣的實驗室法.第3部分:用固定點法測定臭氧濃度 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 3: Determination of ozone concentration using fixed point measurements (ISO 15011-3:2002); German version EN ISO 15011-3:200 |
| DIN EN ISO 15013-1999 |
聚丙烯擠壓片材(PP).要求和試驗方法 |
(Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:1998); German version EN ISO 15013:1998) |
| DIN EN ISO 15025-2003 |
防護服.防熱和防火.限制火焰擴散的試驗方法 |
(Protective clothing - Protection against heat and flame - Method of test for limited flame spread (ISO 15025:2000); German version EN ISO 15025:2002) |
| DIN EN ISO 15027-1-2002 |
浸水服裝.第1部分:日常工作服.要求和安全性 |
(Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2002); German version EN ISO 15027-1:2002) |
| DIN EN ISO 15027-2-2002 |
浸水服裝.第2部分:廢棄服裝.要求和安全性 |
(Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2002); German version EN ISO 15027-2:2002) |
| DIN EN ISO 15027-3-2002 |
浸水服裝.第3部分:試驗方法 |
(Immersion suits - Part 3: Test methods (ISO 15027-3:2002); German version EN ISO 15027-3:2002) |
| DIN EN ISO 15029-1-2002 |
石油和相關產品.耐火液體噴射點燃特性的測定.第1部分:噴射火焰持久性.空心噴射器法 |
(Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistance; Hollow-cone nozzle method (ISO 15029-1:1999); German version EN ISO 15029-1:1999) |
| DIN EN ISO 15061-2001 |
水質.不溶溴酸鹽含量的測定.離子液相色譜法 |
(Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions (ISO 15061:2001); German version EN ISO 15061:2001) |
| DIN EN ISO 15065-2005 |
頭部外形合乎ISO 7721標準的沉頭螺釘?shù)穆耦^孔 |
|
| DIN EN ISO 15065-2005 |
頭部外形合乎ISO 7721標準的沉頭螺釘?shù)穆耦^孔 |
|
| DIN EN ISO 15083-2003 |
小艇.艙底泵吸系統 |
(Small craft - Bilge pumping systems (ISO 15083:2003); German version EN ISO 15083:2003) |
| DIN EN ISO 15084-2003 |
小艇.投錨、停泊和牽引.靠船墩 |
(Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003); German version EN ISO 15084:2003) |
| DIN EN ISO 15087-1-2002 |
牙科起子.第1部分:一般要求(ISO15087-1:1999) |
(Dental elevators - Part 1: General requirements (ISO 15087-1:1999); German version EN ISO 15087-1:2001) |
| DIN EN ISO 15087-2-2000 |
牙科起子.第2部分:沃里克吉姆斯起子 |
(Dental elevators - Part 2: Warwick James elevators (ISO 15087-2:2000); German version EN ISO 15087-2:2000) |
| DIN EN ISO 15087-3-2000 |
牙科起子.第3部分:Cryer起子 |
(Dental elevators - Part 3: Cryer elevators (ISO 15087-3:2000); German version EN ISO 15087-3:2000) |
| DIN EN ISO 15087-4-2000 |
牙科起子.第4部分:Coupland起子 |
(Dental elevators - Part 4: Coupland elevators (ISO 15087-4:2000); German version EN ISO 15087-4:2000) |
| DIN EN ISO 15087-5-2000 |
牙科起子.第5部分:Bein起子 |
(Dental elevators - Part 5: Bein elevators (ISO 15087-5:2000); German version EN ISO 15087-5:2000) |
| DIN EN ISO 15087-6-2000 |
牙科起子.第6部分:Flohr起子 |
(Dental elevators - Part 6: Flohr elevators (ISO 15087-6:2000); German version EN ISO 15087-6:2000) |
| DIN EN ISO 15098-1-2001 |
牙科鑷子.第1部分:一般要求 |
(Dental tweezers - Part 1: General requirements (ISO 15098-1:1999); German version EN ISO 15098-1:2001) |
| DIN EN ISO 15098-2-2000 |
牙科鑷子.第2部分:Meriam型 |
(Dental tweezers - Part 2: Meriam types (ISO 15098-2:2000); German version EN ISO 15098-2:2000) |
| DIN EN ISO 15098-3-2000 |
牙科鑷子.第3部分:學院型 |
(Dental tweezers - Part 3: College types (ISO 15098-3:2000); German version EN ISO 15098-3:2000) |
| DIN EN ISO 15103-1-2004 |
塑料.聚苯撐醚模塑和擠壓材料.第1部分:名稱與符號系統和基本規范 |
|
| DIN EN ISO 15103-2-2004 |
塑料.聚苯撐醚模塑和擠壓材料.第2部分:試驗樣品的制備和性能測定 |
|
| DIN EN ISO 15106-1-2005 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第1部分:濕度探測傳感器法 |
|
| DIN EN ISO 15106-1-2005 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第1部分:濕度探測傳感器法 |
|
| DIN EN ISO 15106-2-2005 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第2部分:紅外探測傳感器法 |
|
| DIN EN ISO 15106-2-2005 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第2部分:紅外探測傳感器法 |
|
| DIN EN ISO 15106-3-2005 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第3部分:電解探測傳感器法 |
|
| DIN EN ISO 15106-3-2005 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第3部分:電解探測傳感器法 |
|
| DIN EN ISO 15119-2004 |
包裝.袋.添裝袋的摩擦測定 |
|
| DIN EN ISO 1513-1994 |
色漆和清漆.試驗樣品的檢驗和制備 |
(Paints and varnishes - Examination and preparation of samples for testing (ISO 1513:1992); German version EN ISO 1513:1994) |
| DIN EN ISO 15136-1-2002 |
石油和天然氣工業的鉆孔設備.人工升降梯的空腔泵系統.第1部分:泵 |
(Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2001); German version EN ISO 15136-1:2001) |
| DIN EN ISO 15138-2003 |
石油和天然氣工業.海上生產設備.加熱、通風和空調設備 |
(Petroleum and natural gas industries - Offshore production installation - Heating, ventilation and air-conditioning (ISO 15138:2000 plus Technical Corrigendum 1:2001); German and English version EN ISO 15138:2000 + AC:2002) |
| DIN EN ISO 1514-1997 |
漆和涂層材料.標準試樣板 |
(Paints and varnishes - Standard panels for testing (ISO 1514:1993); German version EN ISO 1514:1997) |
| DIN EN ISO 1514-2005 |
色漆和清漆.試驗用標準板 |
|
| DIN EN ISO 15141-1-1998 |
食品.谷類作物和谷類作物產品中赭曲霉素A的測定.第1部分:硅膠凈化高效液體色譜法 |
(Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 1: High performance liquid chromatographic method with silica gel clean up (ISO 15141-1:1998); German version EN ISO 15141-1:1998) |
| DIN EN ISO 15141-2-1998 |
食品.谷類作物和谷類作物產品中赭曲霉素A的測定.第2部分:重碳酸鹽凈化高效液體色譜法 |
(Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 2: High performance liquid chromatographic method with bicarbonate clean up (ISO 15141-2:1998); German version EN ISO 15141-2:1998) |
| DIN EN ISO 15147-1999 |
輕型運輸機皮帶.輕型運輸機皮帶交叉寬度和長度的公差 |
(Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:1999); German version EN ISO 15147:1999) |
| DIN EN ISO 15148-2003 |
建筑材料和產品的水熱吸收性.用顆粒浸濕法測定水吸收系數 |
(Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion (ISO 15148:2002); German version EN ISO 15148:2002) |
| DIN EN ISO 15156-1-2003 |
石油和天然氣工業.在石油和天然氣生產中用于含H2S環境的材料.第1部分:耐裂材料選擇的一般原則 |
(Petroleum and natural gas industries - Material for use in HS-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001); German and English version EN ISO 15156-1:2001) |
| DIN EN ISO 15156-2-2005 |
石油、石油化學和天然氣工業.油和氣生產中含硫化氫(H2S)環境下使用的材料.第2部分:耐裂化碳和低合金鋼及鑄鐵的使用 |
|
| DIN EN ISO 15156-2-2005 |
石油、石油化學和天然氣工業.油和氣生產中含硫化氫(H2S)環境下使用的材料.第2部分:耐裂化碳和低合金鋼及鑄鐵的使用 |
|
| DIN EN ISO 15156-3-2005 |
石油、石油化學和天然氣工業.油和氣生產中含硫化氫(H2S)環境下使用的材料.第3部分:耐裂化CRAs(耐腐蝕合金)和其他合金 |
|
| DIN EN ISO 15156-3-2005 |
石油、石油化學和天然氣工業.油和氣生產中含硫化氫(H2S)環境下使用的材料.第3部分:耐裂化CRAs(耐腐蝕合金)和其他合金 |
|
| DIN EN ISO 1516-2002 |
閃點/無閃點測定.閉杯平衡法 |
(Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002); German version EN ISO 1516:2002) |
| DIN EN ISO 1517-1995 |
色漆和清漆.表面干燥試驗.微球體法 |
(Paints and varnishes - Surface-drying test - Ballotini method (ISO 1517:1973); German version EN ISO 1517:1995) |
| DIN EN ISO 1518-2000 |
涂料和清漆.刮痕試驗 |
(Paints and varnishes - Scratch test (ISO 1518:1992); German version EN ISO 1518:2000) |
| DIN EN ISO 15181-1-2004 |
涂料和清漆.防蟲漆的殺蟲劑釋放率測定.第1部分:殺蟲劑萃取的一般方法 |
|
| DIN EN ISO 15181-2-2004 |
色漆和清漆.從防蟲漆釋放殺蟲劑速率的測定.第2部分:萃取物中銅離子濃度的測定和釋放速率的計算 |
|
| DIN EN ISO 15187-2003 |
操縱工業機器人.機器人程序設計和操縱的圖形使用者接口 |
(Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (GUI-R) (ISO 15187:2000); German version EN ISO 15187:2002) |
| DIN EN ISO 1519-1995 |
色漆和清漆.彎曲試驗(圓心軸) |
(Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:1973); German version EN ISO 1519:1995) |
| DIN EN ISO 15195-2004 |
實驗室醫學.參考測量實驗室要求 |
(Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003); German version EN ISO 15195:2003) |
| DIN EN ISO 15195-2004 |
實驗室醫學.參考測量實驗室要求 |
|
| DIN EN ISO 15197 Berichtigung 1-2005 |
體外診斷試驗系統.糖尿病癥管理中自測用血糖監測系統的要求.DIN EN ISO 15197-2004的勘誤 |
|
| DIN EN ISO 15197-2004 |
體外診斷試驗系統.糖尿病癥處理中自測試用血液葡萄糖監測系統的要求 |
|
| DIN EN ISO 1520-2002 |
涂料和清漆.杯突試驗 |
(Paints and varnishes - Cupping test (ISO 1520:1999); German version EN ISO 1520:2001) |
| DIN EN ISO 15212-1-1999 |
擺動式密度計.第1部分:實驗室儀器 |
(Oscillation-type density meters - Part 1: Laboratory instruments (ISO 15212-1:1998); German version EN ISO 15212-1:1999) |
| DIN EN ISO 15212-2-2002 |
擺動式密度計.第2部分:同質液體測量?jī)x器 |
(Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002); German version EN ISO 15212-2:2002) |
| DIN EN ISO 1522-2000 |
涂料和清漆.擺桿阻尼試驗 |
(Paints and varnishes - Pendulum damping test (ISO 1522:1998); German version EN ISO 1522:2000) |
| DIN EN ISO 15225-2000 |
命名.數據交換管理用醫療設備的命名系統規范 |
(Nomenclature - Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange (ISO 15225:2000); German version EN ISO 15225:2000) |
| DIN EN ISO 15225-2005 |
命名.用于管理資料交流的醫療器械命名系統規范 |
|
| DIN EN ISO 1523-2002 |
閃點測定.閉杯平衡法 |
(Determination of flash point - Closed cup equilibrium method (ISO 1523:2002); German version EN ISO 1523:2002) |
| DIN EN ISO 15236-2-2004 |
襯鋼絲繩芯傳送帶.第2部分:選用帶類型 |
|
| DIN EN ISO 15236-4-2004 |
襯鋼絲繩芯傳送帶.第4部分:硬化帶接頭 |
|
| DIN EN ISO 1524-2002 |
涂料、清漆和印刷油墨.研磨細度測定 |
(Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2000); German version EN ISO 1524:2002) |
| DIN EN ISO 15245-1-2003 |
儲氣瓶.連接氣瓶閥的平行螺紋.第1部分:規范 |
(Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 15245-1:2001); German version EN ISO 15245-1:2001) |
| DIN EN ISO 15245-2-2002 |
儲氣瓶.連接儲氣瓶閥門的平行螺紋.第2部分:量規檢驗 |
(Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001); German version EN ISO 15245-2:2001) |
| DIN EN ISO 15252-1-2000 |
塑料.環氧樹脂粉末模塑化合物(EP-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 1: Designation system and basis for specifications (ISO 15252-1:1999); German version EN ISO 15252-1:1999) |
| DIN EN ISO 15252-2-2000 |
塑料.環氧樹脂粉末模塑化合物(EP-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999); German version EN ISO 15252-2:1999) |
| DIN EN ISO 15252-3-2000 |
塑料.環氧樹脂粉末模塑化合物(EP-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 15252-3:1999); German version EN ISO 15252-3:1999) |
| DIN EN ISO 15253-2001 |
眼科光學和設備.增強弱視的光學裝置 |
(Ophthalmic optics and instruments - Optical devices for enhancing low-vision (ISO 15253:2000); German version EN ISO 15253:2000) |
| DIN EN ISO 15254-2003 |
眼科光學和儀器.提高視力用電子光學器件 |
(Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision (ISO 15254:2002); German version EN ISO 15254:2002) |
| DIN EN ISO 15265-2004 |
熱環境的人類工效學.熱工作環境中防止壓力和不適的風險評估策略 |
|
| DIN EN ISO 1530-2003 |
漁網.編織網的名稱與符號和說明 |
(Fishing nets - Description and designation of knotted netting (ISO 1530:2003); German version EN ISO 1530:2003) |
| DIN EN ISO 15301-2002 |
動植物脂肪和油.粗脂肪和原油中沉積物的測定.離心法 |
(Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001); German version EN ISO 15301:2001) |
| DIN EN ISO 15304-2002 |
動植物脂肪和油.植物脂肪和油的過脂肪酸異構體含量測定.氣相色譜法 |
(Animal and vegetable fats and oils - Determination of the content of trans fatty acid isomers of vegetable fats and oils - Gas chromatographic method (ISO 15304:2002); German version EN ISO 15304:2002) |
| DIN EN ISO 15310-2005 |
纖維增強塑料復合材料.用板捻法測定內剪模量 |
|
| DIN EN ISO 15318-1999 |
紙漿、紙和紙板.7個指定的多氯聯苯的測定 |
(Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB) (ISO 15318:1999); German version EN ISO 15318:1999) |
| DIN EN ISO 15320-2004 |
紙漿、紙張和紙板.水提出物中五氯苯酚的測定 |
|
| DIN EN ISO 15330-2000 |
緊固件.氫脆性檢測的預荷載試驗.平行承載表面法 |
(Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999); German version EN ISO 15330:1999) |
| DIN EN ISO 15364-2002 |
船舶和航海技術.載油艙用壓力/真空閥 |
(Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000); German version EN ISO 15364:2001) |
| DIN EN ISO 15367-1-2004 |
激光和激光相關設備.激光束波陣面形狀的測試方法.第1部分:術語和基礎領域 |
(Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003); German version EN ISO 15367-1:2003) |
| DIN EN ISO 15367-1-2004 |
激光和激光相關設備.激光束波陣面形狀的測試方法.第1部分:術語和基礎領域 |
|
| DIN EN ISO 15367-2-2005 |
激光及激光相關設備.激光束波前形狀測定用試驗方法.第2部分:Shack-Hartmann傳感器 |
|
| DIN EN ISO 15367-2-2005 |
激光及激光相關設備.激光束波前形狀測定用試驗方法.第2部分:Shack-Hartmann傳感器 |
|
| DIN EN ISO 15367-2-2005 |
激光及激光相關設備.激光束波前形狀測定用試驗方法.第2部分:Shack-Hartmann傳感器 |
|
| DIN EN ISO 15463-2005 |
石油和天然氣工業.新套管、管和平端鉆管的現場檢驗 |
|
| DIN EN ISO 15463-2005 |
石油和天然氣工業.新套管、管和平端鉆管的現場檢驗 |
|
| DIN EN ISO 15465-2004 |
管道工程.帶繞金屬軟管和軟管配件 |
|
| DIN EN ISO 15480-2000 |
帶攻絲螺紋及六角墊圈螺釘頭的自攻螺釘 |
(Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999) |
| DIN EN ISO 15481-2000 |
帶攻絲螺紋的十字凹槽平頭自攻螺釘 |
(Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999) |
| DIN EN ISO 15482-2000 |
帶攻絲螺紋的十字凹槽沉頭自攻螺釘 |
(Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999); German version EN ISO 15482:1999) |
| DIN EN ISO 15483-2000 |
帶攻絲螺紋的十字凹槽半沉頭自攻螺釘 |
(Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999) |
| DIN EN ISO 15487-2002 |
紡織品.評定家庭洗滌和烘干后衣服和其它紡織品外觀的方法 |
(Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying (ISO 15487:1999); German version EN ISO 15487:2001) |
| DIN EN ISO 15496-2004 |
織物.質量控制用織物的水蒸氣滲透率測量 |
|
| DIN EN ISO 15512-2004 |
塑料.水含量的測定 |
|
| DIN EN ISO 15526-1-2004 |
塑料.聚酮模塑和擠塑材料.第1部分:命名系統和基本規范 |
|
| DIN EN ISO 15526-2-2004 |
塑料.聚酮模塑和擠塑材料.第2部分:試驗樣品的制備和性能測定 |
|
| DIN EN ISO 15528-2000 |
涂料和清漆用涂料、清漆和原材料.抽樣 |
(Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2000); German version EN ISO 15528:2000) |
| DIN EN ISO 15540-2002 |
船舶和航海技術.軟管組件的抗燃性.試驗方法 |
(Ships and marine technology - Fire resistance of hose assemblies - Test methods (ISO 15540:1999); German version EN ISO 15540:2001) |
| DIN EN ISO 15541-2002 |
船舶和航海技術.軟管組件的抗燃性.試驗板的要求 |
(Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999); German version EN ISO 15541:2001) |
| DIN EN ISO 15546-2005 |
石油和天然氣工業.鋁合金鉆桿 |
|
| DIN EN ISO 15546-2005 |
石油和天然氣工業.鋁合金鉆桿 |
|
| DIN EN ISO 15547-2003 |
石油和天然氣工業.板式熱交換器 |
(Petroleum and natural gas industries - Plate heat exchangers (ISO 15547:2000); German and English version EN ISO 15547:2001) |
| DIN EN ISO 15584-2001 |
小型船舶.船內汽油發動機.發動機燃料和電氣件 |
(Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001); German version EN ISO 15584:2001) |
| DIN EN ISO 15586-2004 |
水質.用石墨爐原子吸收光譜法測定痕量素 |
(Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586:2003); German version EN ISO 15586:2003) |
| DIN EN ISO 15586-2004 |
水質.用石墨爐原子吸收光譜法測定痕量素 |
|
| DIN EN ISO 15587-1-2002 |
水質.確定水中所選素的發酵作用.第1部分:水解發酵 |
(Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion (ISO 15587-1:2002); German version EN ISO 15587-1:2002) |
| DIN EN ISO 15587-2-2002 |
水質.確定水中所選素的發酵作用.第2部分:硝酸發酵作用 |
(Water quality - Digestion for the determination of elements in water - Part 2: Nitric acid digestion (ISO 15587-2:2002); German version EN ISO 15587-2:2002) |
| DIN EN ISO 1559-2001 |
牙科材料.牙用汞齊合金 |
(Dental materials - Alloys for dental amalgam (ISO 1559:1995 + Technical Corrigendum 1:1997); German version EN ISO 1559:2001) |
| DIN EN ISO 15605-2004 |
膠粘劑.抽樣 |
|
| DIN EN ISO 15606-2000 |
牙鉆手柄.氣動刮器和刮器尖端 |
(Dental handpieces - Air-powered scalers and scaler tips (ISO 15606:1999); German version EN ISO 15606:1999) |
| DIN EN ISO 15607-2004 |
金屬材料焊接程序規范和合格鑒定.總則 |
|
| DIN EN ISO 15609-1-2005 |
金屬材料焊接程序的規范和合格鑒定.焊接程序規范.第1部分:弧焊 |
|
| DIN EN ISO 15609-2-2001 |
金屬材料焊接程序的規范和合格評定.焊接程序規范.第2部分:氣焊 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001); German version EN ISO 15609-2:2001) |
| DIN EN ISO 15609-3-2004 |
金屬材料焊接程序的規范和合格評定.焊接程序規范.第3部分:電子束焊接 |
|
| DIN EN ISO 15609-4-2004 |
金屬材料焊接程序的規范和合格評定.焊接程序規范.第4部分:激光束焊接 |
|
| DIN EN ISO 15609-5-2004 |
金屬材料焊接程序的規范和合格評定.焊接程序規范.第5部分:電阻焊接 |
|
| DIN EN ISO 1561-1998 |
牙科嵌入鑄蠟嵌體 |
(Dental casting wax (ISO 1561:1995); German version EN ISO 1561:1997) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com