標準號 |
中文名稱 |
英文名稱 |
| BS EN 13411-3-2004 |
鋼絲繩接線端.安全.箍和箍固定 |
|
| BS EN 13411-3-2004 |
鋼絲繩接線端.安全.箍和箍固定 |
|
| BS EN 13411-4-2002 |
鋼絲繩接線端.安全.金屬和樹脂套接 |
(Terminations for steel wire ropes - Safety - Metal and resin socketing) |
| BS EN 13411-5-2003 |
鋼絲繩接線端.安全.U形螺栓鋼絲繩夾具 |
(Terminations for steel wire ropes - Safety - U-bolt wire rope grips) |
| BS EN 13411-6-2004 |
鋼絲繩接線端.安全.不對稱楔槽 |
|
| BS EN 13412-2002 |
混凝土結構的防護和維修用產品和系統.試驗方法.壓縮彈性模量的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression) |
| BS EN 13413-2002 |
彈性地板覆蓋物.在填充纖維襯底上的聚氯乙烯地板覆蓋物.規范 |
(Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing - Specification) |
| BS EN 13414-1-2003 |
鋼絲繩吊索.安全.通用提升吊索 |
(Steel wire rope slings - Safety - Slings for general lifting service) |
| BS EN 13414-2-2003 |
鋼絲繩吊索.安全.由生產商提供的使用和維修信息用規范 |
(Steel wire rope slings - Safety - Specification for information for use and maintenance to be provided by the manufacturer) |
| BS EN 13414-3-2003 |
鋼絲繩吊索.安全.索眼和多股鋼絲繩吊索 |
(Steel wire rope slings - Safety - Grommets and cable-laid slings) |
| BS EN 13415-2002 |
膠粘劑.地板覆蓋物用膠粘劑的試驗.膠粘劑薄膜的電阻測定 |
(Adhesives - Test of adhesives for floor coverings - Determination of the electrical resistance of adhesive films) |
| BS EN 13416-2001 |
防水柔性薄板.屋面防水用瀝青、塑料和橡膠薄板.抽樣規則 |
(Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling) |
| BS EN 13417-1-2001 |
加筋.機織物規范.標識 |
(Reinforcement - Specifications for woven fabrics - Designation) |
| BS EN 13417-2-2001 |
加筋.機織物規范.試驗方法和一般要求 |
(Reinforcement - Specifications for woven fabrics - Methods of test and general requirements) |
| BS EN 13417-3-2001 |
加筋.機織物規范.特殊要求 |
(Reinforcement - Specifications for woven fabrics - Specific Requirements) |
| BS EN 13418-2004 |
橡膠和塑料機械.薄膜和薄板的卷切機.安全要求 |
|
| BS EN 1342-2002 |
室外鋪路天然小方石.要求和試驗方法 |
(Setts of natural stone for external paving - Requirements and test methods) |
| BS EN 13422-2004 |
垂直路標.可攜式可變形警報設備和路邊線輪廓標.可攜式道路交通標志.錐形和圓柱形 |
|
| BS EN 13422-2004 |
垂直路標.可攜式可變形警報設備和路邊線輪廓標.可攜式道路交通標志.錐形和圓柱形 |
|
| BS EN 13423-2000 |
壓縮天然氣車輛的使用 |
(Compressed natural gas vehicle operations) |
| BS EN 13427-2000 |
包裝.包裝和包裝廢棄物歐洲標準的使用要求 |
(Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste) |
| BS EN 13427-2004 |
包裝.包裝和包裝廢棄物歐洲標準的使用要求 |
|
| BS EN 13428-2000 |
包裝.制造和組成的特殊要求.資源減少的防止 |
(Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction) |
| BS EN 13428-2004 |
包裝.生產和組成的特殊要求.資源減少的預防 |
|
| BS EN 13429-2000 |
包裝.重復使用 |
(Packaging - Reuse) |
| BS EN 13429-2004 |
包裝.重復使用 |
|
| BS EN 1343-2002 |
室外鋪路天然路邊石.要求和試驗方法 |
(Kerbs of natural stone for external paving - Requirements and test methods) |
| BS EN 13430-2000 |
包裝.通過材料再循環評定包裝可回收性的要求 |
(Packaging - Requirements for packaging recoverable by material recycling) |
| BS EN 13430-2004 |
包裝.通過材料再循環評定包裝可回收性的要求 |
|
| BS EN 13431-2000 |
包裝.以能量恢復的形式評定包裝可回收性的要求(包括最小次熱值規范) |
(Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value) |
| BS EN 13431-2004 |
包裝.以能量恢復的形式評定包裝可回收性的要求(包括最小次熱值規范) |
|
| BS EN 13432-2000 |
包裝.通過合成及生物降解評定包裝可回收性的要求.試驗計劃和包裝最終驗收的評定標準 |
(Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging) |
| BS EN 13435-2002 |
表面活性劑.烷基二甲基三甲銨乙內酯中自由胺含量的測定 |
(Surface active agents - Determination of free amine content of alkyl dimethyl betaines) |
| BS EN 13437-2004 |
包裝和材料回收.回收方法的標準.回收過程和流程圖的描述 |
|
| BS EN 13439-2004 |
包裝.能源回收率.定義和計算方法 |
|
| BS EN 1344-2002 |
粘土鋪設.要求和試驗方法 |
(Clay pavers - Requirements and test methods) |
| BS EN 13440-2004 |
包裝.回收率.定義和計算方法 |
|
| BS EN 13441-2002 |
生物技術.研究、開發和分析實驗室.關于抑制遺傳變化的植物的指南 |
(Biotechnology - Laboratories for research, development and analysis - Guidance on containment of genetically modified plants) |
| BS EN 13442-2003 |
木質拼花地板、木鑲板和蓋板.耐化學試劑的測定 |
(Wood and parquet flooring and wood panelling and cladding - Determination of the resistance to chemical agents) |
| BS EN 13443-1-2003 |
建筑物內水調節設備.機械過濾器.性能額定值80 |
(Water conditioning equipment inside buildings - Mechanical filters - Performance rating 80) |
| BS EN 13444-1-2001 |
電氣推動的道路車輛.復合式車輛的排氣測量.電氣推動道路車輛.復合式車輛的散氣測量.熱電復合式車輛 |
(Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Thermal electric hybrid vehicl) |
| BS EN 13445-1-2002 |
無燃燒壓力容器.通用 |
(Unfired pressure vessels - General) |
| BS EN 13445-2-2002 |
無燃燒壓力容器.材料 |
(Unfired pressure vessels - Materials) |
| BS EN 13445-3-2002 |
無燃燒壓力容器.設計 |
(Unfired pressure vessels - Design) |
| BS EN 13445-4-2002 |
無燃燒壓力容器.生產 |
(Unfired pressure vessels - Fabrication) |
| BS EN 13445-5-2002 |
無燃燒壓力容器.檢測和試驗 |
(Unfired pressure vessels - Inspection and testing) |
| BS EN 13445-6-2002 |
無燃燒壓力容器.由球形石墨鑄鐵生產的壓力容器和壓力零部件的設計和生產要求 |
(Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron) |
| BS EN 13446-2002 |
人造木板.緊固件撤回能力的測定 |
(Wood-based panels - Determination of withdrawal capacity of fasteners) |
| BS EN 13447-2001 |
電氣推動道路車輛.術語 |
(Electrically propelled road vehicles - Terminology) |
| BS EN 13448-2002 |
農林機械.行間割草設備.安全 |
(Agricultural and forestry machinery - Inter-row mowing units - Safety) |
| BS EN 13450-2003 |
鐵道礫石用集料 |
(Aggregates for railway ballast) |
| BS EN 13451-1-2001 |
游泳池設備.一般安全要求和試驗方法 |
(Swimming pool equipment - General safety requirements and test methods) |
| BS EN 13451-10-2004 |
游泳池設備.跳水平臺、跳水跳板和相關設備的附加專用安全要求和試驗方法 |
|
| BS EN 13451-11-2004 |
游泳池設備.第11部分:可移動游泳池地板和護岸的附加專用安全要求和試驗方法 |
|
| BS EN 13451-2-2001 |
游泳池設備.梯子,腳踏梯和手拉帶的附加特殊安全要求和試驗方法. |
(Swimming pool equipment - Additional specific safety requirements and test methods for ladders, stepladders and handle bends) |
| BS EN 13451-3-2001 |
游泳池設備.水處理用游泳池配件的附加特殊安全要求和試驗方法. |
(Swimming pool equipment - Additional specific safety requirements and test methods for pool fittings for water treatment purposes) |
| BS EN 13451-4-2001 |
游泳池設備.跳臺的附加特殊安全要求和試驗方法. |
Swimming pool equipment - Additional specific safety requirements and test methods for starting platforms |
| BS EN 13451-5-2001 |
游泳池設備.泳道線的附加特殊安全要求和試驗方法. |
(Swimming pool equipment - Additional specific safety requirements and test methods for lane lines) |
| BS EN 13451-6-2001 |
游泳池設備.回轉板的附加特殊安全要求和試驗方法. |
(Swimming pool equipment - Additional specific safety requirements and test methods for turning boards) |
| BS EN 13451-7-2001 |
游泳池設備.水球球門的附加特殊安全要求和試驗方法 |
(Swimming pool equipment - Additional specific safety requirements and test methods for water polo goals) |
| BS EN 13451-8-2001 |
游泳池設備.休閑設備要素的附加特殊安全要求和試驗方法. |
(Swimming pool equipment - Additional specific safety requirements and test methods for leisure water features) |
| BS EN 13452-1-2003 |
鐵路設施.制動.公共運輸制動系統.性能要求 |
(Railway applications - Braking - Mass transit brake systems - Performance requirements) |
| BS EN 13452-2-2003 |
鐵路設施.制動.公共運輸制動系統.試驗方法 |
(Railway applications - Braking - Mass transit brake systems - Methods of test) |
| BS EN 13453-1-2004 |
家具.非家用雙層床和高床.安全、強度和耐用性要求 |
|
| BS EN 13453-2-2004 |
家具.非家用雙層床和高床.試驗方法 |
|
| BS EN 13454-1-2004 |
硫酸鈣基地板找平層用粘合劑、合成粘合劑和工廠制混合物.定義和要求 |
|
| BS EN 13454-1-2004 |
硫酸鈣基地板找平層用粘合劑、合成粘合劑和工廠制混合物.定義和要求 |
|
| BS EN 13454-2-2004 |
基于硫酸鈣的地板找平層用粘合劑、復合粘合劑和工廠制混合物.試驗方法 |
|
| BS EN 13457-2004 |
鞋靴、皮革和仿皮貨物的生產機械.片皮機、剖革機、裁切機、擦膠機和干膠機.安全要求 |
|
| BS EN 13457-2004 |
鞋靴、皮革和仿皮貨物的生產機械.片皮機、剖革機、裁切機、擦膠機和干膠機.安全要求 |
|
| BS EN 13458-1-2002 |
低溫容器.靜態真空絕緣容器.基本要求 |
(Cryogenic vessels - Static vacuum insulated vessels - Fundamental requirements) |
| BS EN 13458-2-2002 |
低溫容器.靜壓真空絕緣容器.設計、制造、檢驗和試驗 |
(Cryogenic vessels - Static vacuum insulated vessels - Design, fabrication, inspection and testing) |
| BS EN 13458-3-2003 |
低溫容器.靜態真空絕緣容器.操作要求 |
(Cryogenic vessels - Static vacuum insulated vessels - Operational requirements) |
| BS EN 1346-1999 |
瓷磚膠粘劑.晾開時間的測定 |
(Adhesives for tiles - Determination of open time) |
| BS EN 13460-2002 |
維修.維修用文件 |
(Maintenance - Documents for maintenance) |
| BS EN 13461-2001 |
包裝.圓柱柔性疊層板管道.尺寸和公差 |
(Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances) |
| BS EN 13463-1-2001 |
潛在性爆炸環境中的非電氣設備.基本方法和要求 |
(Non-electrical equipment for potentially explosive atmospheres - Basic method and requirements) |
| BS EN 13463-2-2005 |
潛在爆炸性環境中使用的非電氣設備.流量限制外殼fr型保護設備 |
|
| BS EN 13463-5-2003 |
潛在性爆炸環境中使用的非電氣設備.結構安全“C“型保護 |
(Non-electrical equipment for potentially explosive atmospheres - Protection by constructional safety “c“) |
| BS EN 13463-8-2004 |
潛在爆炸性環境中使用的非電氣設備.液浸K型防護設備 |
|
| BS EN 13463-8-2004 |
潛在爆炸性環境中使用的非電氣設備.液浸K型防護設備 |
|
| BS EN 13465-2004 |
建筑物的通風.測定住所空氣流動率的計算方法 |
|
| BS EN 13465-2004 |
建筑物的通風.測定住所空氣流動率的計算方法 |
|
| BS EN 13466-1-2002 |
肥料.水含量的測定(卡爾.費歇爾法).甲醇作為萃取介質 |
(Fertilizers - Determination of water content (Karl Fischer methods) - Methanol as extracting medium) |
| BS EN 13466-2-2002 |
肥料.水含量的測定(卡爾.費歇爾法).2-丙醇作為萃取介質 |
(Fertilizers - Determination of water content (Karl Fischer methods) - 2-propanol as extracting medium) |
| BS EN 13467-2001 |
建筑設備和工業設施用隔熱制品.預制管絕緣層的尺寸、垂直度和線性度的測定 |
(Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation) |
| BS EN 13468-2001 |
建筑設備和工業設施用隔熱制品.水溶性氯化物、氟化物、硅酸鹽、鈉離子和pH值的微量測定 |
(Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH) |
| BS EN 13469-2001 |
建筑設備和工業設施用隔熱制品.預制管絕緣層水蒸氣滲透率的測定 |
(Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation) |
| BS EN 1347-1999 |
瓷磚膠粘劑.濕潤性的測定 |
(Adhesives for tiles - Determination of wetting capability) |
| BS EN 13470-2001 |
建筑設備和工業設施用隔熱制品.預制管絕緣層外觀密度的測定 |
(Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation) |
| BS EN 13471-2001 |
建筑設備和工業設施用隔熱制品.熱膨脹系數的測定 |
(Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion) |
| BS EN 13472-2001 |
建筑設備和工業設施用隔熱制品.部分浸入式測定預制管絕緣層的短期水吸收性 |
(Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation) |
| BS EN 13473-1-2001 |
加筋.多軸向多股織物.標識 |
(Reinforcement - Specifications for multi-axial multi-ply fabrics - Designation) |
| BS EN 13473-2-2001 |
加筋.多軸向多股織物規范.試驗方法和一般要求 |
(Reinforcement - Specifications for multi-axial multi-ply fabrics - Methods of test and general requirements) |
| BS EN 13473-3-2001 |
加筋.多軸向多股織物規范.特殊要求 |
(Reinforcement - Specifications for multi-axial multi-ply fabrics - Specific requirements) |
| BS EN 13475-2002 |
石灰處理材料.鈣含量的測定.草酸酯法 |
(Liming materials - Determination of calcium content - Oxalate method) |
| BS EN 13477-1-2001 |
無損檢驗.聲音的散發.設備特性.設備描述 |
(Non-destructive testing - Acoustic emission - Equipment characterization - Equipment description) |
| BS EN 13477-2-2001 |
無損檢驗.聲音的散發.設備特性.操作特性的驗證 |
(Non-destructive testing - Acoustic emission - Equipment characterization - Verification of operating characteristic) |
| BS EN 13478-2002 |
機械安全.防火與消防措施 |
(Safety of machinery - Fire prevention and protection) |
| BS EN 1348-1999 |
瓷磚膠粘劑.混凝土膠粘劑粘接強度的測定 |
(Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives) |
| BS EN 13480-1-2002 |
金屬工業管道.總則 |
(Metallic industrial piping - General) |
| BS EN 13480-2-2002 |
金屬工業管道.材料 |
(Metallic industrial piping - Materials) |
| BS EN 13480-3-2002 |
金屬工業管道.設計和計算 |
(Metallic industrial piping - Design and calculation) |
| BS EN 13480-4-2002 |
金屬工業管道.制造和安裝 |
(Metallic industrial piping - Fabrication and installation) |
| BS EN 13480-5-2002 |
金屬工業管道.檢測和試驗 |
(Metallic industrial piping - Inspection and testing) |
| BS EN 13480-6-2004 |
金屬工業管道.埋管的附加要求 |
|
| BS EN 13481-1-2002 |
鐵路設備.軌道.緊固件系統的性能要求.定義 |
(Railway applications - Track - Performance requirements for fastening systems - Definitions) |
| BS EN 13481-2-2002 |
鐵路設備.軌道.緊固件系統的性能要求.混凝土軌枕的緊固系統 |
(Railway applications - Track - Performance requirements for fastening systems - Fastening systems for concrete sleepers) |
| BS EN 13481-3-2002 |
鐵路設備.軌道.緊固件系統的性能要求.木質軌枕的緊固系統 |
(Railway applications - Track - Performance requirements for fastening systems - Fastening systems for wood sleepers) |
| BS EN 13481-4-2002 |
鐵路設備.軌道.緊固件系統的性能要求.鋼軌枕的緊固系統 |
(Railway applications - Track - Performance requirements for fastening systems - Fastening systems for steel sleepers) |
| BS EN 13481-5-2002 |
鐵路設備.軌道.緊固件系統的性能要求.厚板軌道的緊固系統 |
(Railway applications - Track - Performance requirements for fastening systems - Fastening systems for slab track) |
| BS EN 13481-7-2003 |
鐵路設施.軌道.緊固系統的性能要求.尖軌、岔道和護軌用特殊緊固系統 |
(Railway applications - Track - Performance requirements for fastening systems - Special fastening systems for switches and crossing and check rails) |
| BS EN 13482-2002 |
瀝青用橡膠軟管及軟管組件.規范 |
(Rubber hoses and hose assemblies for asphalt and bitumen - Specification) |
| BS EN 13484-2002 |
突緣工具使用者的安全帽 |
(Helmets for users of luges) |
| BS EN 13485-2002 |
冷凍、深凍/速凍食品和冰淇淋運輸、儲存和配送的空氣和產品溫度測量用溫度計.試驗、性能、適用性 |
(Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability) |
| BS EN 13486-2002 |
冷藏、冷凍、深凍/速凍食品和冰棋淋的運輸、儲存和銷售用溫度記錄儀和溫度計.周期檢驗 |
(Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification) |
| BS EN 13488-2003 |
木地板.鑲嵌地板構件 |
(Wood flooring - Mosaic parquet elements) |
| BS EN 13489-2003 |
木地板.多層拼花地板構件 |
(Wood flooring - Multi-layer parquet elements) |
| BS EN 1349-2000 |
工業處理控制閥門 |
(Industrial process control valves) |
| BS EN 13490-2002 |
機械振動.工業貨車.駕駛員座椅振動的實驗室評價和規范 |
(Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com