標準號 |
中文名稱 |
英文名稱 |
| EN 60264-1-1994 |
繞組線的包裝第1部分：圓繞組線容器 |
Packaging of winding wires - Part 1: Containers for round winding wires (IEC 60264-1:1968) |
| EN 60264-2-1-1994 |
繞組線的包裝第2部分：圓柱形筒裝交貨線盤第1節：基本尺寸 |
Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 1: Basic dimensions (IEC 60264-2-1:1989) |
| EN 60264-2-2-1994 |
繞組線的包裝第2部分：圓柱形筒裝交貨線盤第2節：熱塑性材料可回收線盤規范 |
Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 2: Specification for returnable spools made from thermoplastic material (IEC 60264-2-2:1990) |
| EN 60264-2-2-2004 |
繞組線的封裝.第2-2部分:圓柱形筒裝交貨線盤.熱塑性材料制可回收線盤的規范 |
|
| EN 60264-2-2/prA1-2003 |
繞組線的包裝第2部分：圓柱形筒裝交貨線盤第2節：熱塑性材料可回收線盤規范 修改prA1 |
Amendment 1 to IEC 60264-2-2: Packaging of winding wires - Part 2-2: Cylindrical barrelled delivery spools; Specification for returnable spools made from thermoplastic material |
| EN 60264-2-3-1994 |
繞組線的包裝第2部分：圓柱形筒裝交貨線盤第3節：熱塑性材料不可回收線盤規范 |
Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 3: Specification for non-returnable spools made from thermoplastic material (IEC 60264-2-3:1990) |
| EN 60264-2-3-2004 |
繞組線的封裝.第2-3部分:圓柱形筒裝交貨線盤.熱塑性材料制不可回收線盤的規范 |
|
| EN 60264-2-3/prA1-2003 |
繞組線的包裝第2部分：圓柱形筒裝交貨線盤第3節：熱塑性材料不可回收線盤規范修改prA1 |
Amendment 1 to IEC 60264-2-3: Packaging of winding wires - Part 2-3: Cylindrical barrelled delivery spools; Specification for non-returnable spools made from thermoplastic material |
| EN 60264-3-1-2000 |
繞組線的包裝第3-1部分：圓錐形筒裝交貨線盤基本尺寸 |
Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions (IEC 60264-3-1:1999) |
| EN 60264-3-2-1999 |
繞組線的包裝第3-2部分：圓錐形筒裝交貨線盤熱塑性材料可回收線盤規范 |
Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials (IEC 60264-3-2:1999) |
| EN 60264-3-3-1994 |
繞組線的包裝第3部分：圓錐形筒裝交貨線盤第3節：熱塑性材料不可回收線盤規范 |
Packaging of winding wires - Part 3: Taper barrelled delivery spools - Section 3: Specification for non-returnable spools made from thermoplastic material (IEC 60264-3-3:1990) |
| EN 60264-3-3-2004 |
繞組線的封裝.第3-3部分:錐形筒裝交貨線盤.熱塑性材料制不可回收線盤的規范 |
|
| EN 60264-3-3/prA1-2003 |
繞組線的包裝第3部分：圓錐形筒裝交貨線盤第3節：熱塑性材料不可回收線盤規范修改prA1 |
Amendment 1 to IEC 60264-3-3: Packaging of winding wires - Part 3-3: Taper barrelled delivery spools; Specification for non-returnable spools made from thermoplastic material |
| EN 60264-3-4-1999 |
繞組線的包裝第3-4部分：圓錐形筒裝交貨線盤圓錐形筒裝交貨線盤容器的基本尺寸 |
Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools (IEC 60264-3-4:1999) |
| EN 60264-3-5-1999 |
繞組線的包裝第3-5部分：圓錐形筒裝交貨線盤熱塑性材料線盤線筒規范 |
Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material (IEC 60264-3-5:1999) |
| EN 60264-4-1-1994 |
繞組線的包裝第4-1部分：試驗方法熱塑性材料交貨線盤 |
Packaging of winding wires - Part 4: Methods of test - Section 1: Delivery spools made from thermoplastic material (IEC 60264-4-1:1989) |
| EN 60264-4-1/prA1-1997 |
繞組線的包裝第4-1部分：試驗方法熱塑性材料交貨線盤修改prA1 |
Amendment to IEC 60264-4-1: Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials |
| EN 60264-4-2-1994 |
繞組線的包裝第4-2部分：試驗方法熱塑性材料錐形筒裝交貨線盤容器 |
Packaging of windig wires - Part 4: Methods of test - Section 2: Containers made from thermoplastic material for taper barrelled delivery spools (IEC 60264-4-2:1992) |
| EN 60264-4-2-2004 |
繞組線的封裝.第4-2部分:試驗方法.熱塑材料制錐形筒裝交貨線盤容器 |
|
| EN 60264-4-2/prA1-2003 |
繞組線的包裝第4-2部分：試驗方法熱塑性材料錐形筒裝交貨線盤容器修改prA1 |
Amendment 1 to IEC 60264-4-2: Packaging of winding wires - Part 4-2: Methods of test; Containers made from thermoplastic material for taper barrelled delivery spools |
| EN 60264-5-1-1997 |
繞組線的包裝第5-1部分：帶圓錐形側板的圓柱形筒裝交貨線盤基本尺寸 |
Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with conical flanges - Basic dimensions (IEC 60264-5-1:1997) |
| EN 60264-5-2-2001 |
繞組線的包裝第5-2部分：帶圓錐形側板的圓柱形筒裝交貨線盤熱塑材料制可回收線盤規范 |
Packaging of winding wires - Part 5-2: Cylindrical barelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material (IEC 60264-5-2:2001) |
| EN 60265-1-1998 |
高壓開關第1部分：:額定電壓1kV以上至52kV以下高壓開關 |
High-voltage switches - Part 1: Switches for rated voltages above 1 kV and less than 52 kV (IEC 60265-1:1998) |
| EN 60268-16-2003 |
聲系統設備第16部分：用語音傳輸系數測定語音清晰度的目標額定功率 |
Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index (IEC 60268-16:2003) / Note: Endorsement notice |
| EN 60268-3-2000 |
聲系統設備第3部分：放大器 |
Sound system equipment - Part 3: Amplifiers (IEC 60268-3:2000) / Note: Includes Corrigendum of January 2002 |
| EN 60268-4-1999 |
聲系統設備第4部分：傳聲器（IEC 60268-4:1997） |
Sound system equipment - Part 4: Microphones (IEC 60268-4:1997) |
| EN 60268-4-2004 |
聲系統設備.第4部分:傳聲器 |
|
| EN 60268-5-2003 |
聲系統設備第5部分：揚聲器 |
Sound system equipment - Part 5: Loudspeakers (IEC 60268-5:2003) / Note: Endorsement notice |
| EN 60268-7-1996 |
聲系統設備第7部分：頭戴受話器及耳機 |
Sound system equipment - Part 7: Headphones and earphones (IEC 60268-7:1996) |
| EN 60269-1-1998 |
低壓熔斷器 第1部分：一般要求 |
Low-voltage fuses - Part 1: General requirements (IEC 60269-1:1998) |
| EN 60269-4-1-2002 |
低壓熔斷器第4-1部分：保護半導體器件用熔斷體的補充要求 第Ⅰ-Ⅲ節：標準熔斷器的類型例子 |
Low-voltage fuses - Part 4-1: Supplementary requirements for fuse-links for the protection of semiconductor devices; Sections I to III: Examples of types of standardized fuse-links (IEC 60269-4-1:2002) / Note: Endorsement notice. |
| EN 60270-2001 |
高壓測試技術局部放電測量 |
High-voltage test techniques - Partial discharge measurements (IEC 60270:2000) |
| EN 60276-1996 |
碳刷、刷握、換向器和集電環的定義和名稱 |
Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings (IEC 60276:1968 + A1:1987) |
| EN 60282-1-2002 |
高壓熔斷器第1部分：限流熔斷器 |
High-voltage fuses - Part 1: Current-limiting fuses (IEC 60282-1:2002) / Note: Endorsement notice |
| EN 60286-1-1998 |
自動裝配用件的包裝第1部分：具有軸向引線的件在連續編帶上的帶式包裝 |
Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (IEC 60286-1:1997) |
| EN 60286-3-1998 |
自動裝配用件的包裝第3部分:表面安裝的件在連續編帶上的包裝 |
Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (IEC 60286-3:1997) |
| EN 60286-4-1998 |
自動裝配用件的包裝第4部分:封裝在E和G型包裝件中的電子件用的粘著料斗 |
Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of form E and G (IEC 60286-4:1997) |
| EN 60286-5-1997 |
自動裝配用件的包裝第5部分：矩陣式料盤 |
Packaging of components for automatic handling - Part 5: Matrix trays (IEC 60286-5:1995, modified) |
| EN 60286-5-2004 |
自動裝配用件的包裝.第5部分:矩陣式料盤 |
|
| EN 60286-6-1998 |
自動裝配用件的包裝第6部分：表面安裝組件的散裝盒包裝 |
Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components (IEC 60286-6:1998) |
| EN 60286-6-2004 |
自動裝配用件的包裝.第6部分:表面安裝組件的散裝盒包裝 |
|
| EN 60296-2004 |
電工用液體.變壓器和開關設備用未使用過的礦物絕緣油 |
|
| EN 60297-3-101-2004 |
電子設備用機械結構件.482.6mm(19 in)系列機械結構件的尺寸.第3-101部分:插箱及其插件 |
|
| EN 60297-3-102-2004 |
電子設備用機械結構件.482.6mm(19 in)系列機械結構件的尺寸.第3-102部分:注入器/抽出器手柄 |
|
| EN 60297-3-103-2004 |
電子設備用機械結構件.482.6mm(19 in)系列機械結構件的尺寸.第3-103部分:鍵控和定位銷 |
|
| EN 60297-5-100-2001 |
電子設備用機械結構件482.6mm (19 in)系列機械結構件的尺寸第5-100部分：分機柜和相關插入單設計綜 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-100: Subracks and associated plug-in units; Design overview (IEC 60297-5-100:2001) |
| EN 60297-5-101-2001 |
電子設備用機械結構件482.6mm (19 in)系列機械結構件的尺寸第5-101部分：分機柜和相關插入單插入把 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-101: Subracks and associated plug-in units; Injector/extractor handle (IEC 60297-5-101:2001) |
| EN 60297-5-102-2001 |
電子設備用機械結構件482.6mm (19 in)系列機械結構件的尺寸第5-102分：分機柜和相關插入單電磁屏蔽 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 5-102: Subracks and associated plug-in units; Electromagnetic shielding provision (IEC 60297-5-102:2001) / Note: Includes |
| EN 60297-5-103-2001 |
電子設備用機械結構件482.6mm (19 in)系列機械結構件的尺寸第5-103分：分機柜和相關插入單靜電放電 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-103: Subracks and associated plug-in units; Electrostatic discharge protection (IEC 60297-5-103:2001) |
| EN 60297-5-104-2001 |
電子設備用機械結構件482.6mm (19 in)系列機械結構件的尺寸第5-104分：分機柜和相關插入單鎖扣裝置 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-104: Subracks and associated plug-in units; Keying (IEC 60297-5-104:2001) |
| EN 60297-5-105-2001 |
電子設備用機械結構件482.6mm (19 in)系列機械結構件的尺寸第5-105部分：分機柜和相關插入單定位釘 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-105: Subracks and associated plug-in units; Alignment and/or earth pin (IEC 60297-5-105:2001) |
| EN 60297-5-107-2001 |
電子設備用機械結構件482.6mm (19 in)系列機械結構件的尺寸第5-107部分：分機柜和相關插入單背面安 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-107: Subracks and associated plug-in units; Rear mounted plug-in units (IEC 60297-5-107:2001) |
| EN 60299-1994 |
家用電熱毯性能測試方法 |
Household electric blankets - Methods for measuring performance (IEC 60299:1994) |
| EN 603-1-1996 |
鋁和鋁合金 鍛坯 第1部分：檢驗和交貨的技術條件 |
Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection and delivery |
| EN 603-2-1996 |
鋁和鋁合金 鍛坯 第2部分：機械性能 |
Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties |
| EN 603-3-2000 |
鋁和鋁合金 鍛坯 第3部分：尺寸和形狀公差 |
Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form |
| EN 60300-1-2003 |
可信性管理第1部分：可信性方案管理 |
Dependability management - Part 1: Dependability management systems (IEC 60300-1:2003) / Note: Endorsement notice |
| EN 60300-2-1996 |
可信性管理第2部分：可信性大綱要素和任務 |
Dependability management - Part 2: Dependability programme elements and tasks (IEC 60300-2:1995) |
| EN 60300-2-2004 |
可靠性管理.第2部分:可靠性管理指南 |
|
| EN 60300-3-1-2004 |
可靠性管理.第3-1部分:應用指南.可靠性分析技術.方法指南(IEC 60300-3-1-2003) |
|
| EN 60300-3-12-2004 |
可信性管理.第3-12部分:應用指南.綜合邏輯支持 |
|
| EN 60300-3-14-2004 |
可信性管理.第3-14部分:應用指南.維修和維修支持 |
|
| EN 60305-1996 |
標稱電壓1000V以上架空線路用絕緣子交流系統用陶瓷或玻璃絕緣子單盤形懸式絕緣子單的特性 |
Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type (IEC 60305:1995) |
| EN 60309-1-1999 |
工業用插頭、插座和耦合器第1部分：一般要求 |
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements (IEC 60309-1:1999) |
| EN 60309-1/A11-2004 |
工業用插頭、插座和耦合器.第1部分:一般要求 |
|
| EN 60309-2-1999 |
工業用插頭、插座和耦合器第2部分：插銷和插套附件的尺寸互換性要求 |
Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories (IEC 60309-2:1999) |
| EN 60309-2/A11-2004 |
工業用插頭、插座和耦合器.第2部分:插銷和插套附件的尺寸互換性要求 |
|
| EN 60310-1996 |
鐵路應用運輸車輛的牽引變壓器和電感器 |
Railway applications - Traction transformers and inductors on rolling stock (IEC 60310:1991, modified) |
| EN 60310-2004 |
鐵路設施.鐵路車輛用牽引變壓器和電感器 |
|
| EN 60311-2003 |
家用和類似用途的電熨斗性能測試方法 |
Electric irons for household or similar use - Methods for measuring performance (IEC 60311:2002) / Note: Endorsement notice |
| EN 60312-2004 |
家用真空吸塵器.性能測量方法 |
|
| EN 60315-4-1998 |
各種發射類別的無線電接收機的測量方法第4部分：調頻聲音廣播發射接收機 |
Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions (IEC 60315-4:1997) |
| EN 60315-7-1995 |
各種發射類別的無線電接收機的測量方法第7部分：數字衛星接收機的測量方法 |
Methods of measurement on radio receivers for various classes of emission - Part 7: Methods of measurement on digital satellite radio (DSR) receivers (IEC 60315-7:1995) |
| EN 60315-9-1996 |
各種發射類別的無線電接收機的測量方法第9部分：與無線電數據系統接收相關特性的測量 |
Methods of measurement on radio receivers for various classes of emission - Part 9: Measurement of the characteristics relevant to radio data system (RDS) reception (IEC 60315-9:1996) |
| EN 60317-0-3-2004 |
特種繞組線規范.第0-3部分:一般要求.漆包圓鋁線 |
|
| EN 60317-0-5/prAX-1997 |
特種繞組線規范第0-5部分：一般要求玻璃絲編織裸扁銅線或漆包扁銅線修改prAX |
Amendment to IEC 60317-0-5 |
| EN 60317-0-5/prAY-1997 |
特種繞組線規范第0-5部分：一般要求玻璃絲編織裸扁銅線或漆包扁銅線修改prAY |
Amendment to IEC 60317-0-5 |
| EN 60317-0-6-2001 |
特種繞組線規范第0-6部分：一般要求玻璃絲繞包浸樹脂或浸漬漆裸或漆包圓銅線 |
Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire (IEC 60317-0-6:2001) |
| EN 60317-11-2000 |
特種繞組線規范第11部分：130級絲包可軟焊聚氨酯漆包圓銅束線 |
Specifications for particular types of winding wires - Part 11: Bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering (IEC 60317-11:1999) |
| EN 60317-31/prA2-1997 |
特種繞組線規范第31部分：溫度指數180、玻璃絲繞包聚酯或聚酯酰亞胺浸漬裸或漆包扁銅線修改prA2 |
Amendment to IEC 60317-31 |
| EN 60317-32/prA2-1997 |
特種繞組線規范第32部分：溫度指數155、玻璃絲繞包聚酯或聚酯酰亞胺浸漬裸或漆包扁銅線修改prA2 |
Amendment to IEC 60317-32 |
| EN 60317-33/prA2-1997 |
特種繞組線規范第33部分：溫度指數200、玻璃絲繞包硅酮漆浸漬裸或漆包扁銅線修改prA2 |
Amendment to IEC 60317-33 |
| EN 60317-34-1997 |
特種繞組線規范第34部分：130L級聚酯漆包圓銅線 |
Specifications for particular types of winding wires - Part 34: Polyester enamelled round copper wire, class 130 L (IEC 60317-34:1997) |
| EN 60317-39/prAX-1997 |
特種繞組線規范第39部分：溫度指數180、玻璃絲編織聚酯或聚酰酰亞胺浸漬裸或漆包扁銅線修改prAX |
Amendment to IEC 60317-39 |
| EN 60317-40/prAX-1997 |
特種繞組線規范第40部分：溫度指數200、玻璃絲編織硅酮漆浸漬裸或漆包扁銅線修改prAX |
Amendment to IEC 60317-40 |
| EN 60317-42-1997 |
特種繞組線規范第42部分：200級聚酰氨-酰亞胺漆包圓銅線 |
Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper winding wire, class 200 (IEC 60317-42:1997) |
| EN 60317-43-1997 |
特種繞組線規范第43部分：240級芳香聚酰亞胺薄膜繞包圓銅線 |
Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240 (IEC 60317-43:1997) |
| EN 60317-44-1997 |
特種繞組線規范第44部分：240級芳香聚酰亞胺薄膜繞包扁銅線 |
Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 (IEC 60317-44:1997) |
| EN 60317-45-1998 |
特種繞組線規范第45部分：130級聚酯漆包圓銅線 |
Specification for particular types of winding wires - Part 45: Polyester enamelled round copper wire, class 130 (IEC 60317:1998) |
| EN 60317-46-1997 |
特種繞組線規范第46部分：240級芳香聚酰亞胺漆包圓銅線 |
Specification for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240 (IEC 60317-46:1997) |
| EN 60317-47-1997 |
特種繞組線規范第47部分：240級芳香聚酰亞胺漆包扁銅線 |
Specification for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 (IEC 60317-47:1997) |
| EN 60317-48-2000 |
特種繞組線規范第48部分：溫度指數155、玻璃絲繞包樹脂或漆浸漬裸或漆包圓銅線 |
Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 (IEC 60317-48:1999) |
| EN 60317-49-2000 |
特種繞組線規范第49部分：溫度指數180、玻璃絲繞包樹脂或漆浸漬裸或漆包圓銅線 |
Specifications for particular types of winding wires - Part 49: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 (IEC 60317-49:1999) |
| EN 60317-50-2000 |
特種繞組線規范第50部分：溫度指數220、玻璃絲繞包樹脂或漆浸漬裸或漆包圓銅線 |
Specifications for particular types of winding wires - Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:1999) |
| EN 60317-51-2001 |
特種繞組線規范第51部分：180級可軟焊聚氨基甲酸乙酯漆包圓銅線 |
Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180 (IEC 60317-51:2001) |
| EN 60317-52-1999 |
特種繞組線規范第52部分：溫度指數220、芳香聚酰胺薄膜繞包圓銅線 |
Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220 (IEC 60317-52:1999) |
| EN 60317-53-1999 |
特種繞組線規范第53部分：溫度指數220、芳香聚酰胺薄膜繞包扁銅線 |
Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 (IEC 60317-53:1999) |
| EN 60318-1-1998 |
電聲學人的頭和耳模擬器第1部分：超級聽力耳機校正用耳模擬器 |
Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the calibration of supra-aural earphones (IEC 60318-1:1998) |
| EN 60318-2-1998 |
電聲學人的頭和耳模擬器第2部分：在擴展的高頻范圍內測聽力耳機校正用間歇聽力耦合器 |
Electroacoustics - Simulators of human head and ear - Part 2: An interim acoustic coupler for the calibration of audiometric earphones in the extended high-frequency range (IEC 60318-2:1998) |
| EN 60318-3-1998 |
電聲學人的頭和耳模擬器第3部分：用于聽力測定計的超聽力耳機校正用聲耦合器 |
Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry (IEC 60318-3:1998) |
| EN 60320-1-2001 |
家用和類似一般用途電器偶合器第1部分：一般要求 |
Appliance couplers for household and similar general purposes - Part 1: General requirements (IEC 60320-1:2001) |
| EN 60320-2-1-2000 |
家用和類似一般用途電器偶合器第2-1部分：縫紉機偶合器 |
Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers (IEC 60320-2-1:2000) |
| EN 60320-2-2-1998 |
家用和類似一般用途電器偶合器第2-2部分：家用和類似設備用互聯偶合器 |
Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment (IEC 60320-2-2:1998) |
| EN 60320-2-3-1998 |
家用和類似一般用途電器偶合器第2-3部分：保護等級高于IPXO的電器偶合器 |
Appliances couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0 (IEC 60320-2-3:1998) |
| EN 60322-2001 |
鐵路應用機車車輛用電氣設備開路結構用電力電阻器的規則 |
Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction (IEC 60322:2001) |
| EN 60325-2004 |
輻射防護裝置.α、β和α/β(β能量60keV)污染測量儀和監測儀 |
|
| EN 60332-1-1-2004 |
著火條件下電纜和光纜的試驗.第1-1部分:單根絕緣電線或電纜垂直火焰蔓延的試驗.裝置 |
|
| EN 60332-1-2-2004 |
著火條件下電纜和光纜的試驗.第1-2部分:單根絕緣電線或電纜垂直火焰蔓延的試驗.1kW預混合火焰用規程 |
|
| EN 60332-1-3-2004 |
著火條件下電纜和光纜的試驗.第1-3部分:單根絕緣電線或電纜垂直火焰蔓延的試驗.火焰熔滴/顆粒的測定規程 |
|
| EN 60332-2-1-2004 |
著火條件下電纜和光纜的試驗.第2-1部分:單根小型絕緣電線或電纜的垂直火焰蔓延試驗.裝置 |
|
| EN 60332-2-2-2004 |
著火條件下電纜和光纜的試驗.第2-2部分:單根小型絕緣電線或電纜的垂直火焰蔓延試驗.擴散火焰用規程 |
|
| EN 60335-1-1988 |
家用和類似用途電氣的安全第1部分：通用要求 |
Safety of household and similar electrical appliances; part 1: general requirements (IEC 60335-1:1983, modified) / Note: To be replaced by EN 60335-1 (1994-09). |
| EN 60335-1-2002 |
家用和類似用途電器的安全第1部分：一般要求(IEC 60335-1-2001修訂) |
Household and similar electrical appliances - Safety - Part 1: General requirements (IEC 60335-1:2001, modified) / Note: Observe transition period for EN 60335-1 (1994) ending 2008-07-01*Intended as replacement for EN 60335-1 (1994-09), EN 60335-1/A1 (19 |
| EN 60335-1-2004 |
家用和類似用途電器.安全.第1部分:一般要求 |
|
| EN 60335-1/prAD-1996 |
家用和類似用途電器的安全第1部分：一般要求修改prAD |
Safety of household and similar electrical appliances - Part 1: General requirements; Amendment AD |
| EN 60335-1/prAE-1996 |
家用和類似用途電器的安全第1部分：一般要求修改prAE |
Safety of household and similar electrical appliances - Part 1: General requirements (IEC 60335-1:1991/A1:1994, modified) |
| EN 60335-2-10-2003 |
家用和類似用途電器的安全第2-10部分：地板處理機和濕式擦洗機的特殊要求 |
Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines (IEC 60335-2-10:2002) / Note: Endorsement notice |
| EN 60335-2-101-2002 |
家用和類似用途電器安全 第2-101部分：噴霧器的特殊要求 |
Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers (IEC 60335-2-101:2002) / Note: Endorsement notice |
| EN 60335-2-103-2003 |
家用和類似用途電器安全 第2-103部分：門、窗傳動裝置的特殊要求 |
Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows (IEC 60335-2-103:2002) / Note: Endorsement notice |
| EN 60335-2-11-2003 |
家用和類似用途電器的安全 第2-11部分：滾筒式干衣機的特殊要求 |
Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers (IEC 60335-2-11:2002, modified) / Note: Endorsement notice*To be amended by EN 60335-2-11/prA1 (2003-06). |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com