標準號 |
中文名稱 |
英文名稱 |
| DIN EN 295 Bb.1-2000 |
污水排放管道用陶土管和配件以及管連接件.標準和其它文獻的調查 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Survey on standards and other documents) |
| DIN EN 295-1-1999 |
污水管道用陶土管.異型件及管連接件.第1部分:要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements (includes Amendment A1:1996, Amendment A2:1996 and Amendment A3:1999); German version EN 295-1:1991 + A1:1996 + A2:1996 + A3:1999) |
| DIN EN 295-10-2005 |
排水和污水管道用陶土管、配件及管連接件.第10部分:性能要求 |
|
| DIN EN 295-10-2005 |
排水和污水管道用陶土管、配件及管連接件.第10部分:性能要求 |
|
| DIN EN 295-2-1999 |
污水管道用陶土管.異型件及管連接件.第2部分:質量監測和取樣 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 2: Quality control and sampling (includes Amendment A1:1999); German version EN 295-2:1991 + A1:1999) |
| DIN EN 295-3-1999 |
污水管道用陶土管,異型件及管連接件.第3部分:檢驗方法(包括修改件A1:1998) |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 3: Test methods (includes amendment A1:1998); German version EN 295-3:1991 + A1:1998) |
| DIN EN 295-4-1995 |
排水管和污水管用的陶土管和配件及管接頭.第4部分:專用配件,轉換接頭和可互換附件的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements for special fittings, adapters and compatible accessories; German version EN 295-4:1995) |
| DIN EN 295-5-1999 |
排水管道和排水通道用陶土管,管件和管連接件.第5部分:編織管和管件的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 5: Requirements for perforated vitrified clay pipes and fittings (includes Amendment A1:1999); German version EN 295-5:1994 + A1:1999) |
| DIN EN 295-6-1995 |
污水管道用陶土管.異型件及管連接件.第6部分:陶土井筒的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 6: Requirements for vitrified clay manholes; German version EN 295-6:1995) |
| DIN EN 295-7-1995 |
污水管道用陶土管.異型件及管連接件.第7部分:陶土管和管向前移動時用的連接件的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 7: Requirements for vitrified clay pipes and joints for pipe jacking; German version EN 295-7:1995) |
| DIN EN 29529-1-1992 |
信息處理系統.每面80磁道.改進調頻方式以15916次磁通變換/弧度記錄速率直徑為90毫米(3.5英寸)的盒式軟磁盤 |
(Information processing systems; data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recordings at 15916 ftprad, on 80 tracks on each side; part 1: dimensional, physical and magnetic characteristics (ISO/IEC 952 |
| DIN EN 29529-2-1992 |
信息處理系統.每面80磁道.改進調頻方式以15916次磁通變換/弧度記錄速率直徑為90毫米(3.5英寸)的盒式軟磁盤 |
(Information processing systems; data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 15916 ftprad, on 80 tracks on each side; part 2: track format (ISO/IEC 9529-2:1989); german version EN 29529-2:19 |
| DIN EN 2955-1993 |
航空和航天.鈦和鈦合金廢料的再加工 |
(Aerospace series; recycling of titanium and titanium alloy scrap; German version EN 2955:1993) |
| DIN EN 2955/A1-1995 |
航空和航天.鈦和鈦合金廢料的再加工 |
(Aerospace series - Recycling of titanium and titanium alloy scrap; German version EN 2955:1993/AC:1995) |
| DIN EN 29592-1-1991 |
情報加工的圖示系統.程序器分級人機相互作用的圖示系統.第1部分:功能描述(ISO/IEC9592-1-89.第1版) |
(Information processing systems; computer graphics; Programmer`s Hierarchical Interactive Graphics System (PHIGS); part 1: functional description (ISO/IEC 9592-1:1989, edition 1); english version EN 29592-1:1991) |
| DIN EN 29592-1/A1-1994 |
情報加工的圖示系統.程序器分級人機相互作用的圖示系統.第1部分:功能描述(ISO/IEC9592-1-89.第1版) |
(Information processing systems - Computer graphics - Programmer`s Hierarchical Interactive Graphics Systems (PHIGS) - Part 1: Functional description (ISO/IEC 9592-1:1989, Amendment 1:1992); English version EN 29592-1:1991/A1:1993) |
| DIN EN 29592-1/A10-1995 |
情報加工的圖示系統.程序器分級人機相互作用的圖示系統.第1部分:功能描述 |
(Information processing systems - Computer graphics - Programmer`s Hierarchical Interactive Graphics Systems (PHIGS) - Part 1: Functional description (ISO/IEC 9592-1:1989/Cor. 1:1993 + Cor. 2:1994); English version EN 29592-1:1991/AC:1994) |
| DIN EN 29592-2-1991 |
情報加工的圖示系統.程序器分級人機相互作用的圖示系統.第2部分:文檔文件的格式ISO/IEC9592-2-89.第1版) |
(Information processing systems; computer graphics; programmer`s hierarchical interactive graphics system (PHIGS) part 2: archive file format (ISO/IEC 9592-2:1989, edition 1); english version EN 29592-2:1991) |
| DIN EN 29592-2/A1-1994 |
情報加工的圖示系統.程序器分級人機相互作用的圖示系統.第2部分:文檔文件的格式ISO/IEC9592-2-89.第1版.修 |
(Information processing systems - Computer graphics - Programmer`s Hierarchical Interactive Graphics Systems (PHIGS) - Part 2: Archive file format (ISO/IEC 9592-2:1989, Amendment 1:1992); English version EN 29592-2:1991/A1:1993) |
| DIN EN 29592-3-1991 |
情報加工的圖示系統.程序器分級人機相互作用的圖示系統.第3部分:存檔明碼電文的編碼ISO/IEC9592-3-89.第1版 |
(Information processing systems; computer graphics; programmer`s hierarchical interactive graphics system (PHIGS); part 3: clear-text encoding of archive file (ISO/IEC 9592-3:1989, edition 1); english version EN 29592-3:1991) |
| DIN EN 29592-3/A1-1994 |
情報加工的圖示系統.程序器分級人機相互作用的圖示系統.第3部分:存檔明碼電文的編碼ISO/IEC9592-3-89.第1版 |
(Information processing systems - Computer graphics - Programmer`s Hierarchical Interactive Graphics Systems (PHIGS) - Part 3: Clear-text encoding of archive file (ISO/IEC 9592-3:1989, Amendment 1:1992); English version EN 29592-3:1991/A1:1993) |
| DIN EN 29658-1992 |
鋼.鋁含量的測量.原子吸收分光光度法 |
(Steel; determination of aluminium content; flame atomic absorption spectrometric method (ISO 9658:1990); german version EN 29658:1991) |
| DIN EN 29692-1994 |
涂劑焊條金屬電弧焊.氣體保護金屬電弧焊和氣焊.鋼接頭焊口加工 |
(Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding; joint preparations for steel (ISO 9692:1992); German version EN 29692:1994) |
| DIN EN 297-1998 |
用氣體燃料的鍋爐.帶額定熱載小于或等于70kw氣壓噴嘴的B11型和B11BS型鍋爐 |
(Gas-fired central heating boilers - Type B and B boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW; German version EN 297:1994 + A1:1994 + A2:1996 + A3:1996) |
| DIN EN 297-2005 |
燃氣集中供暖鍋爐.裝有標稱熱輸入量不超過70kw大氣燃燒器的B型鍋爐 |
|
| DIN EN 297/A5-1998 |
用氣體燃料的鍋爐.帶額定熱載小于或等于70kw氣壓噴嘴的B11型和B11BS型鍋爐.修改A5 |
(Gas-fired central heating boilers - Type B and Bboilers, fitted with atmospheric burners of nominal heat input exceeding 70 kW; Amendment A5; German version EN 297:1994/A5:1998) |
| DIN EN 297/A6-2003 |
燃氣式中央供暖鍋爐.裝配有標稱熱輸入不大于70kw的常壓燃燒器的B11型和B11BS型鍋爐.修改件A6 |
(Gas-fired central heating boilers - Type B and B boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW; Amendment A6; German version EN 297:1994/A6:2003) |
| DIN EN 29775 Berichtigung 1-2001 |
DINEN29775-1993的勘誤 |
(Corrigendum to DIN EN 29775:1993 (German version EN 29775:1993/A1:2000)) |
| DIN EN 29775-1993 |
游艇.功率為15KW至40KW單個舷外動力機的控制設備 |
(Small craft; remote steering systems for single outboard motors of 15 kW to 40 kW (ISO 9975:1990); German version EN 29975:1993) |
| DIN EN 298-2004 |
帶或不帶鼓風的氣體燃燒器和燃氣具用自動氣體燃燒器控制裝置 |
(Automatic gas burner control systems for gas burners and gas burning appliances with or without fans; German version EN 298:2003) |
| DIN EN 298-2004 |
帶或不帶鼓風的氣體燃燒器和燃氣具用自動氣體燃燒器控制裝置 |
|
| DIN EN 2985-1996 |
航空和航天.鎳鎘電池.A型尺寸結構 |
(Aerospace series - Nickel-cadmium batteries of format A type; German version EN 2985:1996) |
| DIN EN 2986-1996 |
航空和航天.鎳鎘電池組.B容積結構 |
(Aerospace series - Nickel-cadmium batteries - Of format B type; German version EN 2986:1996) |
| DIN EN 29865-1993 |
紡織品.通過邦迪斯門雨淋試驗測定.防水性能 |
(Textiles; determination of water-repellency of fabrics by the Bundesmann rain-shower test (ISO 9865:1991); German version EN 29865:1993) |
| DIN EN 2987-1996 |
航空和航天.鎳鎘電池.C型尺寸結構 |
(Aerospace series - Nickel-cadmium batteries of format C type; German version EN 2987:1996) |
| DIN EN 2988-1996 |
航空和航天.鎳鎘電池.D型尺寸結構 |
(Aerospace series - Nickel-cadmium batteries of format D type; German version EN 2988:1996) |
| DIN EN 29885-1994 |
寬口玻璃儀器.頂部密封表面的平面度偏差.試驗方法 |
(Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods (ISO 9885:1991); German version EN 29885:1994) |
| DIN EN 29899-1994 |
編程語言-C |
(Programming languages; C; (ISO/IEC 9899:1990); English version EN 29899:1993) |
| DIN EN 29899/A1-1996 |
編程語言-C.修正1:語言定義的完整化 |
(Programming languages - C - Amendment 1: C integrity (ISO/IEC 9899:1990/AMD 1:1995); English version EN 29899:1993/A1:1996) |
| DIN EN 299-1998 |
油壓噴霧器噴嘴.噴霧特性和角度的檢驗 |
(Oil pressure atomizing nozzles - Determination of the angle and spray characteristics; German version EN 299:1998) |
| DIN EN 2991-1996 |
航空和航天.鎳隔電池.E尺寸設計結構 |
(Aerospace series - Nickel-cadmium batteries - Of format E type; German version EN 2991:1996) |
| DIN EN 29917-1994 |
牙科用水基膠粘劑 |
(Dental water-based cements (ISO 9917:1991 + Technical Corrigendum 1); German version EN 29917:1994) |
| DIN EN 2993-1996 |
航空和航天.鎳隔電池.F尺寸設計結構 |
(Aerospace series - Nickel-cadmium batteries - Of format F type; German version EN 2993:1996) |
| DIN EN 29945-1-1994 |
信息技術.系統可交換性用操作系統接口.第1部分:系統和應用程序間接口(API).C語言 |
(Information technology; Portable Operating System Interface (POSIX); part 1: System Application Program Interface (API) C language (ISO/IEC 9945-1-1990); English version EN 29945-1:1993) |
| DIN EN 2997-1-1997 |
航空和航天.工作溫度常數為175℃,200℃,極值為260℃時,耐火或不耐火的,帶螺紋連接器的電器圓形插接件.第1部 |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 1: Technical specification; German version EN 2997-1:1997) |
| DIN EN 2997-10-1997 |
航空航天系列.連續運行溫度為175℃,200℃,尖端溫度為260℃時,耐火或不耐火的,有一對環狀螺紋的,電子循環連 |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 10: Protective cover for plug, product standard; German version E |
| DIN EN 2997-11-1997 |
航空航天系列.連續運行溫度為175℃,200℃,尖端溫度為260℃時,耐火或不耐火的,有一對環狀螺紋的,電子循環連 |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 11: Dummy receptacle; product standard; German version EN 2997-11 |
| DIN EN 2997-2-1997 |
航空和航天.運行溫度常數為175℃,200℃,溫度極限值為260℃時,耐火或不耐火的,帶螺紋連接器的電器圖形插接器 |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 2: Specification of performance and contact arrangements; German |
| DIN EN 2997-3-1997 |
航空和航天.運行溫度常數為175℃,200℃,溫度極限值為260℃,耐火或不耐火的,帶螺紋連接器的電器圖形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 3: Square flange receptacle; product standard; German version EN |
| DIN EN 2997-4-1997 |
航空和航天.運行溫度常數為175℃,200℃,溫度極限值為260℃,耐火或不耐火的,帶螺紋連接器的電器圖形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 4: Jam-nut mounted receptacle; product standard; German version E |
| DIN EN 2997-5-1997 |
航空和航天.運行溫度常數為175℃,200℃,溫度極限值為260℃,耐火或不耐火的,帶螺紋連接器的電器圖形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 5: Hermetic, square flange receptacle; product standard; German v |
| DIN EN 2997-6-1997 |
航空和航天.運行溫度常數為175℃,200℃,溫度極限值為260℃,耐火或不耐火的,帶螺紋連接器的電器圖形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 6: Hermetic jam-nut mounted receptacle; product standard; German |
| DIN EN 2997-7-1997 |
航空和航天.運行溫度常數為175℃,200℃,溫度極限值為260℃,耐火或不耐火的,帶螺紋連接器的電器圖形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 7: Hermetic receptacle with round flange attached by soldering or |
| DIN EN 2997-8-1997 |
航空和航天.運行溫度常數為175℃,200℃,溫度極限值為260℃,耐火或不耐火的,帶螺紋連接器的電器圖形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 8: Plug; product standard; German version EN 2997-8:1997) |
| DIN EN 2997-9-1997 |
航空和航天.運行溫度常數為175℃,200℃,溫度極限值為260℃,耐火或不耐火的,帶螺紋連接器的電器圖形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 9: Protective cover for receptacle; product standard; German vers |
| DIN EN 2998-1996 |
航空和航天.耐高溫鋼制鈍化平墊圈 |
(Aerospace series - Washers, flat, in heat resisting steel, passivated; German version EN 2998:1996) |
| DIN EN 29983-1992 |
信息處理系統.空白軟磁盤的標記(ISO/IEC9983-89) |
(Information processing systems; designation of unrecorded flexible disk cartridges (ISO/IEC 9983:1989); german version EN 29983:1991) |
| DIN EN 3 Bb.1-2000 |
便攜式滅火器.滅火劑和環境保護 |
(Portable fire extinguishers - Fire extinguishing media and environment protection) |
| DIN EN 3 Bb.2-2001 |
EN3說明性文件.便攜式滅火器 |
(Interpretation document of EN 3 - Portable fire extinguishers; German version CR 13934:2000) |
| DIN EN 3-1-1996 |
輕便式滅火器.第1部分:名稱.有效滅火時間.A級和B級火災的檢驗項 |
(Portable fire extinguishers - Part 1: Description, duration of operation, class A and B fire test; German version EN 3-1:1996) |
| DIN EN 3-2-1996 |
輕便式滅火器.第2部分:氣密檢驗.導電性能檢驗.壓實檢驗.特殊要求 |
(Portable fire extinguishers - Part 2: Tightness dielectric test, tamping test, special provision; German version EN 3-2:1996) |
| DIN EN 3-3-1994 |
輕便式滅火器.結構設計.抗壓強度.機械檢驗 |
(Portable fire extinguishers; construction, resistance to pressure, mechanical tests; German version EN 3-3:1994) |
| DIN EN 3-4-1996 |
輕便式滅火器.第4部分:灌充量.滅火能力的最低要求 |
(Portable fire extinguishers - Part 4: Charges, minimum required fire; German version EN 3-4:1996) |
| DIN EN 3-5-1997 |
輕便式滅火器.第5部份:附加的要求和檢驗(包括更改AC:1997) |
(Portable fire extinguishers - Part 5: Specification and supplementary tests (includes Amendment AC:1997); German version EN 3-5:1996 + AC:1997) |
| DIN EN 3-6-1999 |
輕便式滅火器.第6部份:符合EN3第1部分到第5部分要求的輕便式滅火器一致性確認用規范 |
(Portable fire extinguishers - Part 6: Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5 (includes Amendment A1:1999); German version EN 3-6:1995 + A1:1999) |
| DIN EN 3-7-2004 |
便攜式滅火器.第7部分:特性、性能要求和試驗方法 |
|
| DIN EN 30-1-1-1998 |
家用燃氣灶具.第1-1部分:安全性概述 |
(Domestic cooking appliances burning gas fuel - Part 1-1: Safety, General; German version EN 30-1-1:1998) |
| DIN EN 30-1-1-2005 |
家用燃氣灶具.第1-1部分:安全性.總則 |
|
| DIN EN 30-1-1/A1-1999 |
家用燃氣灶具.第1-1部分:安全性.概述.修正A1 |
(Domestic cooking appliances burning gas - Part 1-1: Safety; General; Amendment A1; German Version EN 30-1-1:1998/A1:1999) |
| DIN EN 30-1-2-1999 |
家用燃氣灶具.第1-2部分:安全性.強制對流式烘爐和/或烤架裝置 |
(Domestic cooking appliances burning gas - Part 1-2: Safety; appliances having forced-convection ovens and/or grills; German version EN 30-1-2:1999) |
| DIN EN 30-1-4-2002 |
家用燃氣灶具.第1-4部分:安全性.帶自動燃燒控制系統的含有一個或更多的燃燒爐的灶具 |
(Domestic cooking appliances burning gas - Part 1-4: Safety; Appliances having one or more burners with an automatic burner control system; German version EN 30-1-4:2002) |
| DIN EN 30-2-1-1998 |
家用燃氣灶具.第2-1部分:能源合理利用的概述 |
(Domestic cooking appliances burning gas - Part 2-1: Rational use of energy; General; German version EN 30-2-1:1998) |
| DIN EN 30-2-1-2005 |
家用燃氣灶具.第2-1部分:能源合理利用.總則 |
|
| DIN EN 30-2-2-1999 |
家用燃氣灶具.第2-2部分:能源的合理利用.強制對流式烘爐和/或烤架裝置 |
(Domestic cooking appliances burning gas - Part 2-2: Rational use of energy; appliances having forced-convection ovens and/or grills; German version EN 30-2-2:1999) |
| DIN EN 300-1997 |
細長經校正的木屑制板(OSB).定義,分類和要求 |
(Oriented Strand Boards (OSB) - Definitions, classification and specifications; German version EN 300:1997) |
| DIN EN 300001-2000 |
公共交換電話網(PSTN)的附件.與PSTN中模擬用戶接口連接用設備的一般技術要求 |
(Attachements to the Public Switched Telephone Network (PSTN) - General technical requirements for equipment connected to an analogue subscriber interface in the PSTN (Endorsement of the English version EN 300001 V 1.5.1 (1998-10) as German Standard)) |
| DIN EN 300008-1-2001 |
綜合業務數字網(ISDN).信號系統No.7.文電傳輸?shù)街С謬H互連.第1部分:協議規范 |
() |
| DIN EN 300008-1-2004 |
綜合業務數字網(ISDN).信令系統No.7.支持國際互連的文電傳輸部分.第1部分:協議規范 |
|
| DIN EN 300009-1-2001 |
綜合業務數字網(ISDN).信號系統No.7.支持國際互連的信號連接控制部分(無連接和定向連接).第1部分:協議規范 |
(Integrated Services Digital Network (ISDN) - Signalling system No. 7; Signalling Connection Control Part (SCCP) (connectionless and connection-oriented) to support international interconnection - Part 1: Protocol specification (ITU-T-Recommendation Q.711 |
| DIN EN 300009-2-2003 |
綜合業務數字網(ISDN).信令系統No.7(SS7).支持國際互連的信令連接控制部分(SCCP)(非連接和定向連接等級2). |
(Integrated Services Digital Network (ISDN) - Signalling System No. 7 (SS7); Signalling Connection Control Part (SCCP) (connectionless and connection-oriented class 2) to support international interconnection - Part 2: Protocol Implementation Conformance |
| DIN EN 300011-1-2001 |
綜合業務數字網(ISDN).初級速率用戶網絡接口(UNI).第1部分:層1規范 |
(Integrated Services Digital Network (ISDN) - Primary rate User Network Interface (UNI) - Part 1: Layer 1 specification (Endorsement of the English version EN 300011-1 V 1.2.2. (2000-05) as German standard)) |
| DIN EN 300012-1-2001 |
綜合業務數字網(ISDN).基礎用戶網絡接口(UNI).第1部分:層1規范 |
(Integrated Services Digital Network (ISDN) - Basic User Network Interface (UNI) - Part 1: Layer 1 specification (Endorsement of the English version EN 300012-1 V 1.2.2. (2000-05) as German standard)) |
| DIN EN 300019-1-0-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第1-0部分:環境條件的分類.說明 |
|
| DIN EN 300019-1-1-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第1-1部分:環境條件的分類.存儲 |
|
| DIN EN 300019-1-2-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第1-2部分:環境條件的分類.運輸 |
|
| DIN EN 300019-1-3-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第1-3部分:環境條件的分類.抗大氣影響場所用固定設備 |
|
| DIN EN 300019-1-4-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第1-4部分:環境條件的分類.非抗大氣影響場所用固定設備 |
|
| DIN EN 300019-1-5-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第1-5部分:環境條件的分類.地面車輛裝置 |
|
| DIN EN 300019-1-6-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第1-6部分:環境條件的分類.船舶環境 |
|
| DIN EN 300019-1-7-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第1-7部分:環境條件的分類.便攜設備和非固定使用設備 |
|
| DIN EN 300019-1-8-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第1-8部分:環境條件的分類.地下場所用固定設備 |
|
| DIN EN 300019-2-0-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第2-0部分:環境試驗規范.說明 |
|
| DIN EN 300019-2-1-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第2-1部分:環境試驗規范.存儲 |
|
| DIN EN 300019-2-2-2000 |
設備工程(EE).電信設備的環境條件和環境試驗.第2-2部分:運輸環境試驗規范 |
(Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-2: Specification of environmental tests, transportation (Endorsement of the English version EN 300019-2-2 V 2.1.2 (1999-09) as German |
| DIN EN 300019-2-3-2000 |
設備工程(EE).電信設備的環境條件和環境試驗.第2-3部分:抗大氣影響配置用固定設備的環境試驗規范 |
(Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-3: Specification of environmental tests, stationary use at weatherprotected locations (Endorsement of the English version EN 300019-2- |
| DIN EN 300019-2-3-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第2-3部分:環境試驗規范.抗大氣影響場所用固定設備 |
|
| DIN EN 300019-2-4-2000 |
設備工程(EE).電信設備的環境條件和環境試驗.第2-4部分:非抗大氣影響配置用固定設備的環境試驗規范 |
(Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-4: Specification of environmental tests, stationary use at non-weatherprotected locations (Endorsement of the English version EN 30001 |
| DIN EN 300019-2-4-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第2-4部分:環境試驗規范.非抗大氣影響場所用固定設備 |
|
| DIN EN 300019-2-5-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第2-5部分:環境試驗規范.地面車輛裝置 |
|
| DIN EN 300019-2-6-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第2-6部分:環境試驗規范.船舶環境 |
|
| DIN EN 300019-2-7-2004 |
設備工程(EE).電信設備的環境條件和環境試驗.第2-7部分:環境試驗規范.便攜設備和非固定使用設備 |
|
| DIN EN 300019-2-8-2000 |
設備工程(EE).電信設備的環境條件和環境試驗.第2-8部分:地下用固定設備的環境試驗規范 |
(Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-8: Specification of environmental tests; stationary use at underground locations (Endorsement of the English version EN 300019-2-8 V 2 |
| DIN EN 300052-1-1999 |
綜合業務數字網(ISDN).多用戶號碼輔助服務.數字用戶信號系統No.1(DSSN1)協議.第1分部分:協議規范 |
(Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 1: Protocol specification (Endorsement of the English version EN 300052-1 V 1.2.4 (19 |
| DIN EN 300052-2-1999 |
綜合業務數字網(ISDN).多用戶號碼(MSN)輔助服務.數字用戶信號系統No.1(DSS1)協議.第2部分:協議執行一致性命 |
(Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endor |
| DIN EN 300052-3-1999 |
綜合業務數字網(ISDN).多用戶號碼(MSN)輔助服務.數字用戶信號系統No.1(DSS1)協議.第3部分:用戶用成套試驗裝 |
(Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user(Endorse |
| DIN EN 300052-4-2002 |
綜合業務數字網(ISDN).數字用戶信令系統No.1(DSS1)協議.多重用戶號碼(NSM)輔助服務.第4部分:用戶用成套抽象 |
(Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol; Multi Subscriber Number (MSN) supplementary service - Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for T |
| DIN EN 300052-5-1999 |
綜合業務數字網(ISDN).多用戶號碼(NSM)輔助服務.數字用戶信號系統No.1(DSS1)協議.第5部分:網絡用成套試驗裝 |
(Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network(Endo |
| DIN EN 300052-6-2000 |
綜合業務數字網(ISDN).多用戶號碼輔助服務.數字用戶信號系統No.1(DSSN1)協議.第6部分:網絡用抽象試驗組(ATS |
(Integrated Services Digital Network (ISDN) - Multiple Subscriber Number (MSN) supplementary service; digital Subscriber Signalling System No. one (DSS1) protocol - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information fo |
| DIN EN 300055-1-1999 |
綜合業務數字網(ISDN).終端可移植性(TP)輔助服務.數字用戶信號系統No.1(DSS1)協議.第1部分:協議規范 |
(Integrated Services Digital Network (ISDN); Terminal Portability (TP) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 1: Protocol specification (Endorsement of the English version EN 300055-1 V 1.2.4 (1998-06) |
| DIN EN 300055-2-1999 |
綜合業務數字網(ISDN).終端可移植性(TP)輔助服務.數字用戶信號系統No.1(DSS1)協議.第2部分:協議執行一致性 |
(Integrated Services Digital Network (ISDN); Terminal Portability (TP) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement |
| DIN EN 300058-1-1999 |
綜合業務數字網(ISDN).呼叫等待(CW)輔助服務.數字用戶信號系統No.1(DSS1)協議.第1部分:協議規范 |
(Integrated Services Digital Network (ISDN); Call Waiting (CW) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 1: Protocol specification (Endorsement of the English version EN 300058-1 V 1.2.4 (1998-06) as Germa |
| DIN EN 300058-2-1999 |
綜合業務數字網(ISDN).呼叫等待(CW)輔助服務.數字用戶信號系統No.1(DSS1)協議.第2部分:協議執行一致性命令 |
(Integrated Services Digital Network (ISDN); Call Waiting (CW) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement of the E |
| DIN EN 300058-3-1999 |
綜合業務數字網(ISDN).呼叫等待(CW)輔助服務.數字用戶信號系統No.1(DSS1)協議.第3部分:用戶用成套試驗裝置 |
(Integrated Services Digital Network (ISDN); Call Waiting (CW) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user(Endorsement of the Eng |
| DIN EN 300058-4-2002 |
綜合業務數字網(ISDN).數字用戶信令系統No.1(DSS1)協議.呼叫等待(CW)輔助服務.第4部分:用戶用成套抽象測試( |
(Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol; Call Waiting (CW) supplementary service - Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXI |
| DIN EN 300058-5-1999 |
綜合業務數字網(ISDN).呼叫等待(CW)輔助服務.數字用戶信號系統No.1(DSS1)協議.第4部分:網絡用成套試驗組及 |
(Integrated Services Digital Network (ISDN); Call Waiting (CW) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network(Endorsement of the |
| DIN EN 300058-6-2002 |
綜合業務數字網(ISDN).數字用戶信令系統No.1(DSS1)協議.呼叫等待(CW)輔助服務.第6部分:網絡用成套抽象測試( |
(Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol; Call Waiting (CW) supplementary service - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXI |
| DIN EN 300061-1-1999 |
綜合業務數字網(ISDN).子訪問(SUB)輔助服務.數字用戶信號系統No.1(DSS1)協議.第1部分:協議規范 |
(Integrated Services Digital Network (ISDN); Subaddressing (SUB) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 1: Protocol specification (Endorsement of the English version EN 300061-1 V 1.2.4 (1998-06) as Ger |
| DIN EN 300061-2-1999 |
綜合業務數字網(ISDN).子訪問(SUB)輔助服務.數字用戶信號系統No.1(DSS1)協議.第2部分:協議執行一致性命令語 |
(Integrated Services Digital Network (ISDN); Subadressing (SUB) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement of the |
| DIN EN 300061-3-1999 |
綜合業務數字網(ISDN).子訪問(SUB)輔助服務.數字用戶信號系統No.1(DSS1)協議.第3部分:用戶用成套試驗裝置及 |
(Integrated Services Digital Network (ISDN); Subaddressing (SUB) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user(Endorsement of the E |
| DIN EN 300061-4-1999 |
綜合業務數字網(ISDN).子訪問(SUB)輔助服務.數字用戶信號系統No.1(DSS1)協議.第4部分:用戶用摘要試驗組及部 |
(Integrated Services Digital Network (ISDN); Subaddressing (SUB) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PI |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com