標準號 |
中文名稱 |
英文名稱 |
| EN 1243-1998 |
粘合劑 氨基和酰氨基甲醛冷凝劑中游離甲醛的測定 |
Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| EN 12430-1998 |
建筑物保溫制品點載荷下性能測定 |
Thermal insulating products for building applications - Determination of behaviour under point load |
| EN 12431-1998 |
建筑物保溫制品活動地板保溫制品厚度的測定 |
Thermal insulating products for building applications - Determination of thickness for floating floor insulating products |
| EN 12432-1998 |
體操器械平衡木功能和安全要求、試驗方法 |
Gymnastic equipment - Balancing beams - Functional and safety requirements, test methods |
| EN 12433-1-1999 |
工業、商業和車庫門、大門術語第1部分：門類型 |
Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors |
| EN 12433-2-1999 |
工業、商業和車庫門、大門術語第2部分：門部件 |
Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors |
| EN 12436-2001 |
承重木結構用粘合劑干酪素粘合劑分類和性能要求 |
Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements |
| EN 12438-1998 |
鎂和鎂合金鑄造陽極用鎂合金 |
Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
| EN 12439-1998 |
一次性滅菌直腸導管 |
Sterile rectal catheters for single use |
| EN 1244-1998 |
粘合劑 燈光影響下膠粘劑覆層顏色和/或顏色變化的測定 |
Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light |
| EN 12440-2000 |
天然石料命名準則 |
Natural stone - Denomination criteria |
| EN 12441-1-2001 |
鋅和鋅合金化學分析第1部分：鋅合金中鋁的測定滴定法 |
Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys; Titrimetric method |
| EN 12441-1-2004 |
鋅及鋅合金.化學分析.第1部分:鋅合金中鋁的測定.滴定法 |
|
| EN 12441-2-2001 |
鋅和鋅合金化學分析第2部分：鋅合金中鎂的測定火焰原子吸收光譜法 |
Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys; Flame atomic absorption spectrometric method |
| EN 12441-3-2001 |
鋅和鋅合金化學分析第3部分：鉛、鎘和銅的測定火焰原子吸收光譜法 |
Zinc und zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper; Flame atomic absorption spectrometric method |
| EN 12441-4-2003 |
鋅和鋅合金化學分析第4部分：用分光光度法測定鋅合金中的鐵 |
Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys; Spectrophotometric method |
| EN 12441-5-2003 |
鋅和鋅合金化學分析第5部分：用分光光度法測定原生鋅中的鐵 |
Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc; Spectrophotometric method |
| EN 12441-6-2003 |
鋅和鋅合金化學分析第6部分：用原子吸收光譜法測定鋁和鐵 |
Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron-Flame atomic absorption spectrometric method |
| EN 12442-1-2000 |
醫療設備制造中使用的動物組織及其衍生物第1部分：風險分析和管理 |
Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 1: Analysis and management of risk |
| EN 12442-2-2000 |
醫療設備制造中使用的動物組織及其衍生物第2部分：來源采集和處理的控制 |
Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 2: Controls on sourcing, collection and handling |
| EN 12442-3-2000 |
醫療設備制造中使用的動物組織及其衍生物第3部分：病毒和傳染性試劑消除和/或鈍化的驗證 |
Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible agents |
| EN 12444-2000 |
工業、商業和車庫門、大門抗風荷載能力試驗和計算 |
Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation |
| EN 12445-2000 |
工業、商業和車庫門、大門電動門使用安全性試驗方法 |
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods |
| EN 12446-2003 |
煙囪構件混凝土外墻構件 |
Chimneys - Components - Concrete outer wall elements |
| EN 12447-2001 |
土工織物及其相關產品測定水中耐水解性的篩選試驗法 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water |
| EN 12449-1999 |
銅和銅合金通用無縫圓管 |
Copper and copper alloys - Seamless, round tubes for general purposes |
| EN 1245-1998 |
粘合劑 pH值的測定 試驗方法 |
Adhesives - Determination of pH - Test method |
| EN 12450-1999 |
銅和銅合金無縫圓銅毛細管 |
Copper and copper alloys - Seamless, round copper capillary tubes |
| EN 12451-1999 |
銅和銅合金熱交換器用無縫圓管 |
Copper and copper alloys - Seamless, round tubes for heat exchangers |
| EN 12452-1999 |
銅和銅合金熱交換器用軋制翅片無縫管 |
Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| EN 12453-2000 |
工業、商業和車庫門、大門電動門使用安全性要求 |
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements |
| EN 12454-1998 |
鑄造表面不連續性的目測鋼砂鑄件 |
Founding - Visual examination of surface discontinuities - Steel sand castings |
| EN 12455-1999 |
彈性地板覆蓋物軟木襯底規范 |
Resilient floor coverings - Specification for corkment underlay |
| EN 12457-1-2002 |
廢物特性浸出粒狀廢料和殘?jiān)龅姆闲栽囼?yàn)第1部分：在2 l/kg的液固比下對高固體含量和粒子尺寸小 |
Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (withou |
| EN 12457-2-2002 |
廢物特性浸出粒狀廢料和殘?jiān)龅姆闲栽囼?yàn)第2部分：在10 l/kg的液固比下對粒子尺寸小于4mm的（沒 |
Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for material with particle size below 4 mm (without or with size reduction) |
| EN 12457-3-2002 |
廢物特性浸出粒狀廢料和殘?jiān)龅姆闲栽囼?yàn)第3部分：在2 l/kg和8 l/kg的液固比下對高固體含量和粒 |
Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 |
| EN 12457-4-2002 |
廢物特性浸出粒狀廢料和殘?jiān)龅姆闲栽囼?yàn)第4部分：在10 l/kg的液固比下對粒子尺寸小于10mm的（沒 |
Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
| EN 12458-1999 |
表面活性劑硬水中穩定性的測定 |
Surface active agents - Determination of stability in hard water |
| EN 1246-1998 |
粘合劑 灰分和硫酸鹽灰分測定 |
Adhesives - Determination of ash and sulphated ash |
| EN 12460-1998 |
生物技術大規模加工和生產根據生物風險選擇和安裝設備指南 |
Biotechnology - Large-scale process and production - Guidance on equipment selection and installation in accordance with the biological risk |
| EN 12461-1998 |
生物技術大規模加工和生產廢物處理、鈍化和測試指南 |
Biotechnology - Large-scale process and production - Guidance for the handling, inactivating and testing of waste |
| EN 12462-1998 |
生物技術泵性能標準 |
Biotechnology - Performance criteria for pumps |
| EN 12463-2004 |
食品加工機械.填充和輔助機器.安全和衛生要求 |
|
| EN 12464-1-2002 |
照明設備工作場所照明 室內工作場所 |
Light and lighting - Lighting of work places - Part 1: Indoor work places |
| EN 12465-2001 |
高架線木桿耐久性要求 |
Wood poles for overhead lines - Durability requirements |
| EN 12466-1998 |
彈性地板覆蓋物詞匯 |
Resilient floor coverings - Vocabulary |
| EN 12468-1997 |
生物技術用于環境的改良生物遺傳變性植物審慎釋放監測戰略指南 |
Biotechnology - Modified organisms for application in the environment - Guidance for the monitoring strategies for deliberate releases of genetically modified plants |
| EN 12469-2000 |
生物技術微生物安全柜的性能標準 |
Biotechnology - Performance criteria for microbiological safety cabinets |
| EN 1247-2004 |
鑄造機械.戽斗、澆注設備、離心鑄造機、連續和半連續鑄造機的安全要求 |
|
| EN 12470-1-2000 |
臨床溫度計第1部分：配備最大器件的金屬玻璃中液體體溫計 |
Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device |
| EN 12470-2-2000 |
臨床溫度計第2部分：相變型（點陣）溫度計 |
Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers |
| EN 12470-3-2000 |
臨床溫度計配備最大器件的小型電子溫度計（非預測式和預測式）的性能 |
Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device |
| EN 12470-4-2000 |
臨床溫度計第4部分：用于連續測量的電子溫度計的性能 |
Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement |
| EN 12470-5-2003 |
臨床溫度計第5部分：紅外耳狀溫度計（配備最大器件）的性能 |
Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device) |
| EN 12472-1998 |
用于檢測涂覆物中釋放的鎳的腐蝕和磨損模擬 |
Method for the simulation of wear and corrosion for the detection of nickel release from coated items |
| EN 12473-2000 |
海水中陰極保護的一般原則 |
General principles of cathodic protection in sea water |
| EN 12474-2001 |
水下管道的陰極保護 |
Cathodic protection of submarine pipelines |
| EN 12475-1-1998 |
致密成形型耐火制品的分類第1部分：硅酸鋁制品 |
Classification of dense shaped refractory products - Part 1: Aluminia-silica products |
| EN 12475-2-1998 |
致密成形型耐火制品的分類第2部分：殘留碳小于7%的基本制品 |
Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon |
| EN 12475-3-1998 |
致密成形型耐火制品的分類第3部分：殘留碳為7%-30%的基本制品 |
Classification of dense shaped refractory products - Part 3: Basic products containing from 7 % to 30 % residual carbon |
| EN 12475-4-1998 |
致密成形型耐火制品的分類第4部分：特殊制品 |
Classification of dense shaped refractory products - Part 4: Special products |
| EN 12476-2000 |
金屬磷酸鹽轉化膜制定要求的方法 |
Phosphate conversion coatings of metals - Method of specifying requirements |
| EN 12477-2001 |
焊工防護手套 |
Protective gloves for welders |
| EN 12479-2001 |
高架線木桿尺寸測量方法和容許偏差 |
Wood poles for overhead lines - Sizes - Methods of measurement and permissible deviations |
| EN 1248-2001 |
鑄造機械 噴砂設備的安全要求 |
Foundry machinery - Safety requirements for abrasive blasting equipment |
| EN 12480-2002 |
氣量計旋轉置換氣量計 |
Gas meters - Rotary displacement gas meters |
| EN 12481-2000 |
自粘帶術語 |
Self adhesive tapes - Terminology |
| EN 12482-1-1998 |
鋁和鋁合金一般用重軋坯料第1部分： 熱軋重軋坯料規范 |
Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock |
| EN 12482-2-1998 |
鋁和鋁合金一般用重軋坯料第2部分：冷軋重軋坯料規范 |
Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock |
| EN 12483-1999 |
液體泵帶頻率轉換器的泵設備保證和兼容性試驗 |
Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests |
| EN 12484-1-1999 |
灌溉技術自動草坪灌溉系統第一部分：業主對設備程序的定義 |
Irrigation techniques - Automatic turf irrigation systems - Part 1: Definition of the programme of equipment by the owner |
| EN 12484-2-2000 |
灌溉技術自動草坪灌溉系統第2部分：典型技術模板的設計和定義 |
Irrigation techniques - Automatic turf irrigation systems - Part 2: Design and definition of typical technical templates |
| EN 12484-3-2000 |
灌溉技術自動草坪灌溉系統第3部分：自動控制和系統管理 |
Irrigation techniques - Automatic turf irrigation systems - Part 3: Automatic control and system management |
| EN 12484-4-2002 |
灌溉技術自動草坪灌溉系統第4部分：驗收和安裝 |
Irrigation techniques - Automatic turf irrigation systems - Part 4: Installation and acceptance |
| EN 12484-5-2002 |
灌溉技術自動草坪灌溉系統第5部分：測試方法 |
Irrigation techniques - Automatic turf irrigation systems - Part 5: Testing methods of systems |
| EN 12485-2001 |
人類生活水的水處理用化學品碳酸鈣高鈣石灰和半鍛燒百云石試驗方法 |
Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime and half-burnt dolomite - Test methods |
| EN 12487-2000 |
金屬的防腐蝕鋁和鋁合金上清洗和非清洗的鉻酸鹽轉化鍍層 |
Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| EN 12489-2000 |
企業、商業和車庫用大門以及活動門防水滲透性試驗方法 |
Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method |
| EN 12490-1998 |
木材和木材制品的耐用性防腐處理實心木材處理木材中雜酚油保留量和滲透程度的測定 |
Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood |
| EN 12491-2001 |
滑翔傘設備緊急時用降落傘安全要求和試驗方法 |
Paragliding equipment - Emergency parachutes - Safety requirements and test methods |
| EN 12493-2001 |
液化石油氣（ＬＰＧ）用焊接鋼罐油槽車設計和制造 |
Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture |
| EN 12495-2000 |
海上固定鋼結構的陰極防腐保護 |
Cathodic protection for fixed steel offshore structures |
| EN 12499-2003 |
金屬結構的內陰極保護 |
Internal cathodic protection of metallic structures |
| EN 125-1991 |
燃?xì)馄骶哂没鹧姹O(jiān)視裝置 熱電型火焰監視裝置 |
Flame supervision devices for gas burning appliances; thermo-electric flame supervision devices |
| EN 12500-2000 |
金屬材料的防腐大氣環境中可能出現的腐蝕大氣環境腐蝕性的分類、測定和評價 |
Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments |
| EN 125000-1997 |
通用規范鐵氧體材料磁芯 |
Generic specification: Cores made of ferrite materials |
| EN 12501-1-2003 |
金屬材料的防腐泥土中可能出現的腐蝕第1部分：總則 |
Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General |
| EN 12501-2-2003 |
金屬材料的防腐泥土中可能出現的腐蝕第２部分：低合金和非合金的鋼鐵材料 |
Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials |
| EN 12503-1-2001 |
運動墊第１部分：體操墊安全要求 |
Sports mats - Part 1: Gymnastic mats, safety requirements |
| EN 12503-2-2001 |
運動墊第２部分：撐桿跳高和跳高墊安全要求 |
Sports mats - Part 2: Pole vault and high jump mats, safety requirements |
| EN 12503-3-2001 |
運動墊第３部分：柔道墊安全要求 |
Sports mats - Part 3: Judo mats, safety requirements |
| EN 12503-4-2001 |
運動墊第４部分：減振性能測定 |
Sports mats - Part 4: Determination of shock absorption |
| EN 12503-5-2001 |
運動墊第５部分：底層摩擦力的測定 |
Sports mats - Part 5: Determination of the base friction |
| EN 12503-6-2001 |
運動墊第６部分：頂層摩擦力的測定 |
Sports mats - Part 6: Determination of the top friction |
| EN 12503-7-2001 |
運動墊第７部分：靜韌性的測定 |
Sports mats - Part 7: Determination of static stiffness |
| EN 12504-1-2000 |
結構用混凝土試驗第1部分：空心試樣壓縮試樣的取樣檢驗和試驗 |
Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
| EN 12504-2-2001 |
結構用混凝土試驗第２部分：無損檢驗回彈值的測定 |
Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number |
| EN 12504-4-2004 |
結構中的混凝土試驗.第4部分:超音波脈沖速率的測定 |
|
| EN 12505-2000 |
食品加工機械加工食用油和油脂的離心機安全和衛生要求 |
Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
| EN 12507-1999 |
運輸服務用于道路運輸、儲藏和配送業的EN ISO 9002應用的指導性說明 |
Transportation services - Guidance notes on the application of EN ISO 9002 to the road transportation, storage and distribution industries |
| EN 12508-2000 |
金屬和合金的防腐表面處理、金屬和其它無機涂層詞匯 |
Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary |
| EN 12509-2001 |
架空線用木桿試驗方法彈性系數、抗彎強度、密度和含水量的測定 |
Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content |
| EN 1251-1-2000 |
低溫容器 不超過1000L容積的可運輸?shù)恼婵战^熱容器 第1部分：基本要求 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements |
| EN 1251-2-2000 |
低溫容器 不超過1000L容積的可運輸?shù)恼婵战^熱容器 第2部分：設計、制造、檢驗和試驗 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing |
| EN 1251-3-2000 |
低溫容器 不超過1000L容積的可運輸?shù)恼婵战^熱容器 第3部分：操作要求 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements |
| EN 12510-2001 |
架空線用木桿強度分等標準 |
Wood poles for overhead lines - Strength grading criteria |
| EN 125100-1991 |
分規范：電感器用磁性氧化磁芯 |
Sectional specification: magnetic oxide cores for inductor applications |
| EN 12511-2001 |
架空線用木桿特性值測定 |
Wood poles for overhead lines - Determination for characteristic values |
| EN 12512-2001 |
原木結構試驗方法機械緊固件形成接頭的循環試驗 |
Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners |
| EN 12513-2000 |
鑄件耐磨鑄鐵 |
Founding - Abrasion resistant cast irons |
| EN 12514-1-2000 |
燃油咀爐供油系統用的裝置第1部分：安全要求和試驗零部件、輸油泵、控制和安全裝置、油罐 |
Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks |
| EN 12514-2-2000 |
燃油爐供油系統用的裝置第２部分：安全要求和試驗零部件、閥門、管道、濾油器、油氣分離器、油量指示表 |
Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters |
| EN 12515-1997 |
熱環境利用要求濕度的計算值作熱應力的分析測定和說明 |
Hot environments - Analytical determination and interpretation of thermal stress using calculation of required sweat rate (ISO 7933:1989, modified) |
| EN 12516-2-2004 |
工業用閥.外殼設計強度.第2部分:鋼閥外殼的計算方法 |
|
| EN 12517-1998 |
焊縫的無損檢驗焊接接頭放射線檢驗驗收等級 |
Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels |
| EN 12518-2000 |
人類生活用水水處理用化學品高鈣石灰 |
Chemicals used for treatment of water intended for human consumption - High-calcium lime |
| EN 12519-2004 |
窗戶和行人用門.術語 |
|
| EN 1252-1-1998 |
低溫容器 材料 第1部分：溫度低于-80℃時的強度要求 |
Cryogenic vessels - Materials - Part 1: Toughness requirments for temperatures below -80℃ |
| EN 1252-2-2001 |
低溫容器 材料 第2部分：溫度低于-80℃和-20℃之間的強度要求 |
Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80℃ and -20℃ |
| EN 125200-1991 |
分規范:線性變壓器用磁性氧化磁芯 |
Sectional specification: magnetic oxide cores for linear transformers |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com