EN——?dú)W洲標準翻譯目錄查詢

咨詢熱線：010-6973-5438

標準號	中文名稱	英文名稱
EN 3152-2004	航空航天系列.鍍銀或未涂覆的耐熱鋼FE-PA2601 (A286)制MJ螺紋自鎖緊螺母.等級:1100 MPa(室溫)/425 鳦.技術規范
EN 316-1999	木纖維板定義、分類和符號	Wood fibreboards - Definition, classification and symbols
EN 317-1993	碎料板和纖維板在水中浸泡后膨脹厚度的測定	Particleboards and fibreboards; determination of swelling in thickness after immersion in water
EN 318-2002	木基板與相對濕度變化有關的尺寸變化的測定	Wood based panels - Determination of dimensional changes associated with changes in relative humidity
EN 319-1993	碎料板和纖維板與板平面垂直的拉伸強度的測定	Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board
EN 3196-1994	航空航天系列 FE-PA92HT(A286) 耐熱鋼鍍銀自鎖六角螺母等級：1100MPa(環境溫度) 425℃	Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425℃
EN 32-1998	壁掛式洗臉池連接尺寸	Wall-hung wash basins - Connecting dimensions
EN 320-1993	纖維板抗螺釘軸向拔出力的測定	Fibreboards - Determination of resistance to axial withdrawal of screws
EN 3202-1995	航空航天系列 T形頭螺栓的孔和阱設計標準	Aerospace series - Holes and traps for T-head bolts - Design standard
EN 3207-1998	航空航天系列橡膠化合物技術規范	Aerospace series - Rubber compounds - Technical specification
EN 321-2001	木基板循環試驗條件下抗潮濕性的測定	Wood-based panels - Determination of moisture resistance under cyclic test conditions
EN 3212-1995	航空航天系列油漆和清漆在緩沖氯化納溶劑中用更換浸漬試驗測定耐蝕性	Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution
EN 322-1993	木基板含水量測定	Wood-based panels - Determination of moisture content
EN 323-1993	木基板密度測定	Wood-based panels - Determination of density
EN 3230-2001	航空航天系列鍍鎘鋼制標準對邊矮的槽頭/齒形頭六角螺母等級：900 MPa (環境溫度)/235℃	Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃
EN 3236-1998	航空航天系列鍍銀耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718) 薄壁自鎖緊短內螺紋插件	Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
EN 3237-1998	航空航天系列鍍銀耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718) 薄壁自鎖緊長內 螺紋插件	Aerospace series - Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
EN 3239-1995	航空航天系列鍍銀HI-P101HT耐熱鎳基合金自鎖十二角螺母等級：1210 MPa(環境溫度)/730℃	Aerospace series - Nuts, bihexagonal, self-locking, in heat-resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/730℃
EN 324-1-1993	木基板板尺寸測定第1部分：厚度、寬度和長度測定	Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length
EN 324-2-1993	木基板板尺寸測定第2部分：垂直度和邊緣平直度測定	Wood-based panels; determination of dimensions of boards; part 2: determination of squareness and edge straightness
EN 3243-2001	標準號：	中文標題：
EN 3244-2001	標準號：	中文標題：
EN 3245-2001	標準號：	中文標題：
EN 3246-2001	標準號：	中文標題：
EN 3247-2001	標準號：	中文標題：
EN 3248-2001	航空航天系列鈦合金管連接件8°30′帶鎖異徑管端管接頭	Aerospace series - Pipe coupling 8°30′in titanium alloy - Adaptors, reduced pipe end, with lockring
EN 325-1993	木基板試件尺寸測定	Wood-based panels - Determination of dimensions of test pieces
EN 326-1-1994	木基板取樣、剪切和檢驗 第1部分：試樣的取樣和剪切及試驗結果的表述	Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
EN 326-2-2000	木基板取樣、剪切和檢驗 第2部分：工廠中的質量控制	Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory
EN 326-3-1998	木基板取樣、剪切和檢驗 第3部分：一批到貨板的檢驗	Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of a consignment of panels
EN 3264-2001	航空航天系列鈦合金管連接件8°30′ 止推金屬絲螺母	Aerospace series - Pipe coupling 8°30′ in titanium alloy - Thrust wire nut
EN 3266-2001	航空航天系列鈦合金管連接艙壁螺母	Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut
EN 3267-2001	航空航天系列墊圈鈦合金艙壁	Aerospace series - Washers, bulkhead in titanium alloy
EN 3268-2001	標準號：	中文標題：
EN 3269-2001	標準號：	中文標題：
EN 327-2000	熱交換器強制對流空氣制冷冷凝器建立性能的試驗程序	Heat exchangers - Forced convection air cooled refrigerant condensers - Test procedure for establishing performance
EN 3272-2001	標準號：	中文標題：
EN 3273-2001	標準號：	中文標題：
EN 3274-2001	標準號：	中文標題：
EN 3275-2002	標準號：	中文標題：
EN 3280-1994	航空航天系列飛機機架用剛性或自對中滾動軸承技術規范	Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification
EN 3280/prA1-2001	航空航天系列飛機機架用剛性或自對中滾動軸承技術規范修改A1	Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification; Amendment A1
EN 3281-1994	航空航天系列飛機機架滾動軸承鋼制硬質單列滾珠軸承直徑系列8和9 尺寸和荷載	Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9 - Dimensions and loads
EN 3282-1994	航空航天系列飛機機架滾動軸承鍍鎘鋼制硬質單列滾珠軸承直徑系列8和9 尺寸和荷載	Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9 - Dimensions and loads
EN 3283-1994	航空航天系列飛機機架滾動軸承耐腐蝕鋼制硬質單列滾珠軸承直徑系列8和9 尺寸和荷載	Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9 - Dimensions and loads
EN 3284-1994	航空航天系列飛機機架滾動軸承鋼制硬質單列滾珠軸承直徑系列0和2標準間隙種類尺寸和荷載	Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
EN 3285-1994	航空航天系列飛機機架滾動軸承鍍鎘鋼制硬質單列滾珠軸承直徑系列0和2標準間隙種類尺寸和荷載	Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
EN 3286-1994	航空航天系列飛機機架滾動軸承耐腐蝕鋼制硬質單列滾珠軸承直徑系列0和2標準間隙種類尺寸和荷載	Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
EN 3287-1994	航空航天系列飛機機架滾動軸承鋼制雙排自對中滾珠軸承直徑系列2尺寸和荷載	Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2 - Dimensions and loads
EN 3288-1994	航空航天系列飛機機架滾動軸承鍍鎘鋼制雙排自對中滾珠軸承直徑系列2尺寸和荷載	Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2 - Dimensions and loads
EN 3289-1994	航空航天系列飛機機架滾動軸承耐腐蝕鋼制雙排自對中滾珠軸承直徑系列2尺寸和荷載	Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2 - Dimensions and loads
EN 3290-1994	航空航天系列飛機機架滾動軸承鋼制單列自對中滾柱軸承直徑系列3和4尺寸和荷載	Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4 - Dimensions and loads
EN 3291-1994	航空航天系列飛機機架滾動軸承鍍鎘鋼制單列自對中滾柱軸承直徑系列3和4尺寸和荷載	Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4 - Dimensions and loads
EN 3292-1994	航空航天系列飛機機架滾動軸承耐腐蝕鋼制單列自對中滾柱軸承直徑系列3和4尺寸和荷載	Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4 - Dimensions and loads
EN 3297-1998	航空航天系列NI-P100HT(鉻鎳鐵合金718)耐熱鎳基合金MJ螺紋薄壁自鎖緊插件技術規范	Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification
EN 3298-1998	航空航天系列薄壁自鎖緊插件裝配和拆卸程序	Aerospace series - Inserts, thin wall, self-locking - Installation and removal procedure
EN 33-2003	帶封閉耦合沖洗水箱的座式抽水馬桶連接尺寸	Pedestal W.C. pans with close-coupled flushing cistern - Connecting dimensions
EN 330-1993	木材防腐劑測定涂層下和地面露出接觸用木材防腐劑的相對防護效果的現場試驗方法：L連接法	Wood preservatives; field test method for determining the relative protective effectiveness of a wood preservative for use under a coating and exposed out of ground contact: L-joint method
EN 3303-1997	航空航天系列鍍鎘合金鋼六角凹頭粗公差普通柄中等長度螺紋帽螺釘?shù)燃?jí)：1100MPa(環境溫度)/235℃	Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃
EN 3304-1996	標準號：	中文標題：
EN 3305-1996	航空航天系列鍍鎘合金鋼短螺紋緊公差普通柄偏置十字凹槽100°埋頭矮頭螺釘?shù)燃?jí)：1100MPa(環境溫度)/235	Aerospace series - Screws, 100°countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃
EN 3306-1996	標準號：	中文標題：
EN 3307-1996	標準號：	中文標題：
EN 3308-1996	標準號：	中文標題：
EN 331-1998	建筑物燃?xì)庠O(shè)備用人工操縱球閥和封閉底錐形旋塞閥	Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
EN 335-1-1992	木材和衍生材料的耐久性生物侵襲的危害分級的定義第1部分：總則	Durability of wood and derived materials; definition of hazard classes of biological attack; part 1: general
EN 335-2-1992	木材和衍生材料的耐久性生物侵襲的危害分級的定義第2部分：實心木材的應用	Durability of wood and wood-based products; definition of hazard classes of biological attack; part 2: application to solid wood
EN 335-3-1995	木材和衍生材料的耐久性生物侵襲的危害分級的定義第3部分：木基板的應用	Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels
EN 336-2003	結構木材尺寸、允許偏差	Structural timber - Sizes, permitted deviations
EN 3377-1996	航空航天系列FE-PA92TH(A286)耐熱鋼六角頭自鎖螺母等級：1100MPa(環境溫度)/ 425℃	Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425℃
EN 3379-1996	航空航天系列合金NI-P101HT(Waspaloy 一種耐高溫?zé)徭嚮辖?耐熱鎳基中長螺紋緊公差柄雙六角螺栓等級：	Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730℃
EN 338-2003	結構木材強度分級	Structural timber - Strength classes
EN 3380-1996	航空航天系列扣套技術規范	Aerospace series - Rings, retaining - Technical specification
EN 3381-1996	標準號：	中文標題：
EN 34-1992	帶封閉耦合沖洗水箱的壁掛式抽水馬桶連接尺寸	Wall hung W.C. pan with close coupled cistern - Connecting dimensions
EN 340-1993	防護服一般要求	Protective clothing; General requirements
EN 342-2004	防護服.防寒外套和防寒套裝
EN 343-2003	防護服防雨服	Protective clothing - Protection against rain
EN 344-2-1996	專業應用的安全防護和職業鞋靴第2部分：附加要求和試驗方法	Safety, protective and occupational footwear for professional use - Part 2: Additional requirements and test methods
EN 3446-1995	航空航天系列儀器及設備用耐蝕鋼制不帶凸緣的精密滾珠軸承尺寸和荷載	Aerospace series - Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads
EN 345-2-1996	專業應用的安全鞋靴第2部分：附加規范	Safety footwear for professional use - Part 2: Additional specifications
EN 346-2-1996	專業應用的保護鞋靴第2部分：附加規范	Protective footwear for professional use - Part 2: Additional specifications
EN 347-2-1996	專業應用的職業鞋靴第2部分：附加規范	Occupational footwear for professional use - Part 2: Additional specifications
EN 3475-100-2002	航空航天系列飛行器用的電纜試驗方法第100部分：總則	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 100: General
EN 3475-201-2002	航空航天系列飛行器用的電纜試驗方法第201部分：可視檢查／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 201: Visual examination / Note: Applies only in conjunction with EN 3475-100
EN 3475-202-2002	航空航天系列飛行器用的電纜試驗方法第202部分：質量／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 202: Mass / Note: Applies only in conjunction with EN 3475-100
EN 3475-301-2002	航空航天系列飛行器用的電纜試驗方法第301部分：每單位長度的歐母電阻／注：適合與EN 3475-100結合使	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 301: Ohmic resistance per unit length / Note: Applies only in conjunction with EN 3475-100
EN 3475-302-2002	航空航天系列飛行器用的電纜試驗方法第302部分：電壓校檢試驗／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 302: Voltage proof test / Note: Applies only in conjunction with EN 3475-100
EN 3475-303-2002	航空航天系列飛行器用的電纜試驗方法第303部分：絕緣電阻／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 303: Insulation resistance / Note: Applies only in conjunction with EN 3475-100
EN 3475-304-2002	航空航天系列飛行器用的電纜試驗方法第304部分：表面電阻／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 304: Surface resistance / Note: Applies only in conjunction with EN 3475-100
EN 3475-305-2002	航空航天系列飛行器用的電纜試驗方法第305部分：過載電阻／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 305: Overload resistance / Note: Applies only in conjunction with EN 3475-100
EN 3475-401-2002	航空航天系列飛行器用的電纜試驗方法第401部分：加速老化／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 401: Accelerated ageing / Note: Applies only in conjunction with EN 3475-100
EN 3475-402-2002	航空航天系列飛行器用的電纜試驗方法第402部分：收縮和脫層／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 402: Shrinkage and delamination / Note: Applies only in conjunction with EN 3475-100
EN 3475-403-2002	航空航天系列飛行器用的電纜試驗方法第403部分：脫層和阻塞／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 403: Delamination and blocking / Note: Applies only in conjunction with EN 3475-100
EN 3475-404-2002	航空航天系列飛行器用的電纜試驗方法第404部分：熱沖擊／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 404: Thermal shock / Note: Applies only in conjunction with EN 3475-100
EN 3475-405-2002	航空航天系列飛行器用的電纜試驗方法第405部分：環境溫度下的彎曲／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 405: Bending at ambient temperature / Note: Applies only in conjunction with EN 3475-100
EN 3475-406-2002	航空航天系列飛行器用的電纜試驗方法第406部分：冷彎試驗／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 406: Cold bend test / Note: Applies only in conjunction with EN 3475-100
EN 3475-407-2002	航空航天系列飛行器用的電纜試驗方法第407部分：可燃性／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 407: Flammability / Note: Applies only in conjunction with EN 3475-100
EN 3475-409-2002	航空航天系列飛行器用的電纜試驗方法第409部分：真空老化／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing / Note: Applies only in conjunction with EN 3475-100
EN 3475-410-2002	航空航天系列飛行器用的電纜試驗方法第410部分：耐熱性／注：適合與EN 3475-100和 ASTM D 3032 (1986	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 410: Thermal endurance / Note: Applies only in conjunction with EN 3475-100 and ASTM D 3032 (1986) paragraph 14
EN 3475-412-2002	航空航天系列飛行器用的電纜試驗方法第412部分：防潮性能	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance
EN 3475-413-2002	航空航天系列飛行器用的電纜試驗方法第414部分：纏繞反向測試	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 413: Wrap back test
EN 3475-501-2002	航空航天系列飛行器用的電纜試驗方法第501部分：動態切口／注：適合與EN 3475-100和 ASTM D 3032 (19	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 501: Dynamic out-through / Note: Applies only in conjunction with EN 3475-100 and ASTM D 3032 (1986) paragraph 22
EN 3475-502-2002	航空航天系列飛行器用的電纜測試方法第502部分：切口擴散／注：適合與EN 3475-100 結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 502: Notch propagation / Note: Applies only in conjunction with EN 3475-100
EN 3475-503-2002	航空航天系列飛行器用的電纜測試方法第503部分：擦傷磨損／注：適合與EN 3475-100 結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 503: Scrape abrasion / Note: Applies only in conjunction with EN 3475-100
EN 3475-504-2002	航空航天系列飛行器用的電纜測試方法第504部分：扭轉／注：適合與EN 3475-100 結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 504: Torsion / Note: Applies only in conjunction with EN 3475-100
EN 3475-505-2002	航空航天系列飛行器用的電纜測試方法第505部分：導線和絞線的拉伸試驗／注：適合與EN 3475-100結合使	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 505: Tensile test on conductors and strands / Note: Applies only in conjunction with EN 3475-100
EN 3475-506-2002	航空航天系列飛行器用的電纜測試方法第506部分：電鍍連續性／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 506: Plating continuity / Note: Applies only in conjunction with EN 3475-100
EN 3475-507-2002	航空航天系列飛行器用的電纜測試方法第507部分：絕緣層與導體間的剝離性及粘附力／注：適合與EN 3475	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 507: Strippability and adherence of insulation to the conductor / Note: Applies only in conjunction with EN 3475-100
EN 3475-508-2002	航空航天系列飛行器用的電纜測試方法第508部分：電鍍厚度	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 508: Plating thickness
EN 3475-509-2002	航空航天系列飛行器用的電纜測試方法第509部分：軟焊性	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability
EN 3475-510-2002	航空航天系列飛行器用的電纜測試方法第510部分：鎧裝和包皮材料、抗張強度和擠壓絕緣層的伸張度	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material
EN 3475-511-2002	航空航天系列飛行器用的電纜試驗方法第511部分：電纜與電纜磨損	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion
EN 3475-512-2002	航空航天系列飛行器用的電纜試驗方法第512部分：耐彎曲性	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 512: Flexure endurance
EN 3475-603-2002	航空航天系列飛行器用的電纜試驗方法第603部分：抗?jié)窕≤壽E性	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 603: Resistance to wet arc tracking
EN 3475-604-2002	航空航天系列飛行器用的電纜試驗方法第604部分：抗干弧擴展性	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 604: Resistance to dry arc propagation
EN 3475-605-2002	航空航天系列飛行器用的電纜試驗方法第605部分：濕短路試驗	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 605: Wet short circuit test
EN 3475-701-2002	航空航天系列飛行器用的電纜試驗方法第701部分：絕緣層與導體間的剝離性和粘附力／注：適合與EN 3475	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 701: Strippability / Note: Applies only in conjunction with EN 3475-100
EN 3475-702-2002	航空航天系列飛行器用的電纜試驗方法第702部分：屏蔽抗沖擊能力／注：適合與EN 3475-100結合使用	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 702: Screen pushback capability / Note: Applies only in conjunction with EN 3475-100
EN 3475-703-2002	航空航天系列飛行器用的電纜試驗方法第703部分：制造商標記的持久性／注：適合與EN 3475-100結合使	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 703: Permanence of manufacturers marking / Note: Applies only in conjunction with EN 3475-100

[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183] [184] [185] [186] [187] [188] [189] [190] [191] [192] [193] [194] [195] [196] [197] [198] [199] [200] [201] [202] [203] [204] [205] [206] [207] [208] [209] [210] [211] [212] [213] [214] [215] [216] [217] [218] [219] [220] [221] [222] [223] [224] [225] [226] [227] [228] [229] [230] [231] [232] [233] [234] [235] [236] [237] [238] [239] [240] [241] [242] [243] [244] [245] [246] [247] [248] [249] [250] [251] [252] [253] [254] [255] [256] [257] [258] [259] [260] [261] [262] [263] [264] [265] [266] [267] [268] [269] [270] [271] [272] [273] [274] [275] [276] [277] [278] [279] [280] [281] [282] [283] [284] [285] [286] [287] [288] [289] [290] [291] [292] [293] [294] [295] [296] [297] [298] [299] [300] [301] [302] [303] [304] [305] [306] [307] [308] [309] [310] [311] [312] [313] [314] [315] [316] [317] [318] [319] [320] [321] [322] [323] [324] [325] [326] [327] [328] [329] [330] [331] [332] [333] [334] [335] [336] [337] [338] [339] [340] [341] [342] [343] [344] [345] [346] [347] [348] [349] [350] [351] [352] [353] [354] [355] [356] [357] [358] [359] [360] [361] [362] [363] [364] [365] [366] [367] [368] [369] [370] [371] [372] [373] [374] [375] [376] [377] [378] [379] [380] [381] [382] [383]

寬天下翻譯公司版權所有 2008