標準號 |
中文名稱 |
英文名稱 |
| EN 13899-2003 |
滾軸運動器材 滾軸滑冰鞋 安全要求和試驗方法 |
Roller sports equipment - Roller skates - Safety requirements and test methods |
| EN 13900-1-2003 |
顏料和補充劑 塑料中擴散方法和擴散特性的評估第1部分：一般介紹 |
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction |
| EN 13900-2-2003 |
顏料和補充劑 塑料中擴散方法和擴散特性的評估 第2部分：通過二輥研磨法測定塑化聚氯乙烯中的著色性和易 |
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinylchloride by two-roll milling |
| EN 13900-3-2003 |
顏料和補充劑 塑料中擴散方法和擴散特性的評估 第3部分：通過二輥研磨法測定聚乙烯中的著色性和黑色及顏 |
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling |
| EN 13900-4-2004 |
顏料和稀釋劑.擴散方法和在塑料中可擴散性的評估.第4部分:由雙滾研磨機測定聚乙烯中的白顏料的顏色性能和易擴散性 |
|
| EN 13904-2003 |
衛生座便器用低阻力噴射排水口 |
Low resistance shower outlets for sanitary tapware |
| EN 13905-2003 |
衛生座便器用低阻力噴射排水軟管 |
Low resistance shower hoses for sanitary tapware |
| EN 13906-1-2002 |
由圓絲和圓條制成的柱形螺旋彈簧 計算和設計 第1部分：壓縮彈簧 |
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1: Compression springs |
| EN 13906-2-2001 |
由圓絲和圓條制成的柱形螺旋彈簧 計算和設計 第2部分：拉伸彈簧 |
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs |
| EN 13906-3-2001 |
由圓絲和圓條制成的柱形螺旋彈簧 計算和設計 第3部分：扭轉彈簧 |
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 3: Torsion springs |
| EN 1391-1998 |
皮革和鞋類材料用粘合劑 評估材料粘合程度的方法 最低要求和材料分類 |
Adhesives for leather and footwear materials - A method for evaluating the bondability of materials - Minimum requirements and material classification |
| EN 13911-2004 |
消防員用防護服.消防員用防火頭罩的要求和試驗方法 |
|
| EN 13913-2003 |
鐵路設備 橡膠懸掛構件 基于彈性體的機械部件 |
Railway applications - Rubber suspension components - Elastomer-based mechanical parts |
| EN 13918-2003 |
氣焊設備 焊接、切割及關工藝中所用的氣瓶上的集成流量計調壓器 分類、規范和試驗方法 |
Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests |
| EN 13919-2002 |
標準號： |
中文標題： |
| EN 1392-1998 |
皮革和鞋類材料用粘合劑 溶劑膠和分散粘合劑 特定條件下測量粘合強度的試驗方法 |
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Test methods for measuring the bond strength under specified conditions |
| EN 13920-1-2003 |
鋁和鋁合金 廢料 第1部分：一般要求、取樣和試驗 |
Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests |
| EN 13920-10-2003 |
鋁和鋁合金 廢料 第10部分：由用過的鋁飲料罐組成的廢料 |
Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of use aluminium beverage cans |
| EN 13920-11-2003 |
鋁和鋁合金 廢料 第11部分：包括鋁-銅散熱器在內的廢料 |
Aluminium and aluminium alloys - Scrap - Part 11: Scrap consisting of aluminium-copper radiators |
| EN 13920-12-2003 |
鋁和鋁合金 廢料 第12部分：由單一合金組成的廢料 |
Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy |
| EN 13920-13-2003 |
鋁和鋁合金 廢料 第13部分：由兩種或多種合金組成的混合切屑 |
Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys |
| EN 13920-14-2003 |
鋁和鋁合金 廢料 第14部分：消費品鋁包裝生產的廢料 |
Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings |
| EN 13920-15-2003 |
鋁和鋁合金 廢料 第15部分：消費品鋁包裝產生的去涂層鋁廢料 |
Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings |
| EN 13920-16-2003 |
鋁和鋁合金 廢料 第16部分：由浮渣、碎屑、鑄錠的金屬物組成的廢料 |
Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics |
| EN 13920-2-2003 |
鋁和鋁合金 廢料 第2部分：純鋁廢料 |
Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap |
| EN 13920-3-2003 |
鋁和鋁合金 廢料 第3部分：線頭和纜繩 |
Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap |
| EN 13920-4-2003 |
鋁和鋁合金 廢料 第4部分：由單一鍛壓合金組成的廢料 |
Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy |
| EN 13920-5-2003 |
鋁和鋁合金 廢料 第5部分：由同一系列的兩種或多種鍛壓合金組成的廢料 |
Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series |
| EN 13920-6-2003 |
鋁和鋁合金 廢料 第6部分：由兩種或多種鍛壓合金組成的廢料 |
Aluminium and aluminium alloys - Scrap - Part 6: Scrap consisting of two or more wrought alloys |
| EN 13920-7-2003 |
鋁和鋁合金 廢料 第7部分：由鑄錠組成的廢料 |
Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings |
| EN 13920-8-2003 |
鋁和鋁合金 廢料 第8部分：由鋁分離工藝必經的切歲程序中產生的非鐵質材料組成的廢料 |
Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes |
| EN 13920-9-2003 |
鋁和鋁合金 廢料 第9部分：非鐵質碎料的鋁分離工藝所產生的廢料 |
Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials |
| EN 13922-2003 |
危險品運輸罐 罐的服務設備 液體燃料防溢出系統 |
Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels |
| EN 13925-1-2003 |
無損檢測 多晶和非晶材料的X射線衍射 第1部分：一般原理 |
Non-destructive testing - X-ray diffraction from polycrystalline and amorphous material - Part 1: General principles |
| EN 13925-2-2003 |
無損檢測 多晶和非晶材料的X射線衍射 第2部分：程序 |
Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures |
| EN 13926-2003 |
表面活性劑 乙氧基衍生物 羥基值測定 N-甲基咪唑法 |
Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value - N-methyl imidazole method |
| EN 13927-2003 |
無損檢驗?zāi)恳暀z驗設備 |
Non-destructive testing - Visual testing - Equipment |
| EN 13938-1-2004 |
民用爆炸物.推進劑和火箭推進劑.第1部分:要求 |
|
| EN 13938-2-2004 |
民用爆炸物.推進劑和火箭推進劑.第2部分:耐靜電能量的測定 |
|
| EN 13938-3-2003 |
民用爆破器材推進劑和火箭推進劑第3部分：爆炸躍遷爆燃的測定 |
Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration of detonation transition |
| EN 13938-5-2004 |
民用炸藥.推進劑和火箭推進劑.第5部分:孔隙率和裂縫的測定 |
|
| EN 13938-6-2004 |
民用爆炸物.推進劑和火箭推進劑.第6部分:固態火箭推進劑.抑制劑涂層完整性測定指南 |
|
| EN 13938-7-2004 |
民用炸藥.推進劑和火箭推進劑.第7部分:黑火藥的性能測定 |
|
| EN 13941-2003 |
區域供暖用預絕熱連接管的設計與安裝 |
Design and installation of preinsulated bonded pipe systems for district heating |
| EN 13942-2003 |
石油和天然氣工業管道運輸系統管道閥門 |
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999, modified) |
| EN 13946-2003 |
水質水下硅藻定期采樣和預清理指南標準 |
Water quality - Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers |
| EN 13949-2003 |
呼吸裝置使用壓縮性萘特羅克斯和氧氣的開路自閉式潛水裝置要求、試驗、標識 |
Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking |
| EN 1395-1996 |
熱噴涂 熱噴涂設備的驗收檢驗 |
Thermal spraying - Acceptance inspection of thermal spraying equipment |
| EN 13951-2003 |
液泵安全要求糧食加工設備保證使用中的衛生保健設計規程 |
Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use |
| EN 13952-2003 |
液化石油氣（LPG）罐充氣程序 |
LPG cylinders - Filling procedures |
| EN 13953-2003 |
液化石油氣（LPG）用可運輸、可再裝油缸卸壓閥 |
Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
| EN 13955-2002 |
表面活性劑離子表面活性劑克拉夫特點和溶解度的測定 |
Surface active agents - Determination of Krafft point and solubility of ionic surface active agents |
| EN 13957-2003 |
鋁合及鋁合金 一般用途擠壓圓形、蛇形管 規范 |
Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification |
| EN 13958-2003 |
鋁及鋁合金一般用途冷拉圓形、蛇形管 規范 |
Aluminium and aluminium alloys - Cold drawn round, coiled tube for general applications - Specification |
| EN 13959-2004 |
防污止回閥.包括DN 6至DN 250.E系列A、B、C、D型 |
|
| EN 1396-1996 |
鋁和鋁合金 一般用途的盤繞涂層薄板和帶材 規范 |
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 13964-2004 |
吊頂.要求和試驗方法 |
|
| EN 13966-1-2003 |
液體涂敷材料霧化和噴射設備轉換效率的測定第1部分：平板法 |
Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels |
| EN 13969-2004 |
防水用柔性薄板.包括瀝青底層制箱用薄板的瀝青防潮薄板.定義和特性 |
|
| EN 1397-1998 |
熱交換器 室內液壓電扇線圈件 確定性能的試驗程序 |
Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance |
| EN 13970-2004 |
防水用柔性薄板.瀝青水蒸氣控制層.定義和特性 |
|
| EN 13971-2002 |
碳酸鹽石灰材料反應性測定 .鹽酸電位滴定法 |
Carbonat liming materials - Determination of reactivity - Potentiometric titration method with hydrochlorid acid |
| EN 13972-2002 |
剛性塑料容器標稱容量 滿容量和總?cè)萘康亩x以及滿容量和總?cè)萘康臏y定 |
Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity |
| EN 13973-2002 |
剛性塑料容器排水能力的測定方法 |
Rigid plastics containers - Method for determination of drainability |
| EN 13974-2002 |
剛性塑料容器尺寸、重量和容積的差規范 |
Rigid plastics containers - Specification of tolerance for dimensions, weight and volume |
| EN 13975-2003 |
體外診斷用醫療設備驗收試驗的取樣方法統計法 |
Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects |
| EN 1398-1997 |
船塢水平儀 |
Dock levellers |
| EN 13980-2002 |
潛在爆炸必壞境質量體系的應用 |
Potentially explosive atmospheres - Application of quality systems |
| EN 13981-1-2003 |
鋁及鋁合金鐵路結構用產品，檢驗和交貨技術條件第1部分：擠壓產品 |
Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for inspection and delivery - Part 1: Extruded products |
| EN 13981-2-2004 |
鋁及鋁合金.結構性鐵路設施用制品的檢驗和交換用技術條件.第2部分:板和薄板 |
|
| EN 13984-2004 |
防水用柔性薄板.塑料和橡膠蒸氣控制層.定義和特性 |
|
| EN 13985-2003 |
機械工具 安全 剪板機 |
Machine tools - Safety - Guillotine shears |
| EN 13986-2002 |
建筑用木制嵌板 特性、一致性評價和標識 |
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 13990-2004 |
木地板.實心軟木地板 |
|
| EN 13991-2003 |
煤熱分解的衍生物煤焦油基油雜酚油試驗方法和規范 |
Derivates from coal pyrolysis - Coal tar based oils: Creosotes - Specifications and test methods |
| EN 13996-2002 |
表面活性劑 起泡粉未和消泡粉未 渦輪攪拌法 |
Surface active agents - Foaming power and antifoaming power - Turbine stirring method |
| EN 14-1994 |
床毯尺寸 |
Dimensions of bed blankets |
| EN 140-1998 |
呼吸保護裝置 半面罩和四分之一面罩 要求、測試、標志 |
Respiratory protective devices - Half masks and quarter masks - Requirements, testing, marking |
| EN 1400-1-2002 |
兒童用品和保育品 嬰兒和兒童用橡皮奶頭 第1部分：一般安全要求及產品信息 |
Child use and care articles - Soothers for babies and young children - Part 1: General safety requirements and product information |
| EN 1400-2-2002 |
兒童用品和保育品 嬰兒和兒童用橡皮奶頭 第2部分：機械要求及試驗方法 |
Child use and care articles - Soothers for babies and young children - Part 2: Mechanical requirements and tests |
| EN 1400-3-2002 |
兒童用品和保育品 嬰孩和兒童用橡皮奶頭 第3部分：化學要求及試驗方法 |
Child use and care articles - Soothers for babies and young children - Part 3: Chemical requirements and tests |
| EN 1401-1-1998 |
非壓力地下雨水管和污水管用塑料管道系統未增塑聚氯乙烯(PVC-U) 管道 第1部分：配件和系統規范 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| EN 140101-1996 |
空白詳細規范：低功率非線繞固定電阻器(評定水平S) |
Blank detail specification: Fixed low power non-wire wound resistors (Assessment level S) |
| EN 140102-1996 |
空白詳細規范：低功率非線繞固定電阻器(評定水平M) |
Blank detail specification: Fixed low power non-wirewound resistors (Assessment level M) |
| EN 140103-1996 |
空白詳細規范：低功率非線繞固定電阻器(評定水平P) |
Blank detail specification: Fixed low power non-wirewound resistors (Assessment level P) |
| EN 140104-1996 |
空白詳細規范：低功率非線繞固定電阻器(評定水平SB和SC) |
Blank detail specification: Fixed low power non-wirewound resistors (Assessment levels SB and SC) |
| EN 14011-2003 |
水質帶電的水生物取樣 |
Water quality - Sampling of fish with electricity |
| EN 14012-2003 |
郵政服務服務質量投訴和賠償程序規范 |
Postal services - Quality of service - Measurements of complaints and redress procedures |
| EN 14015-2004 |
在室溫及高于室溫下液體儲存用平底、立式、圓柱形、現場建造的地面上可焊鋼罐的設計和制造規范 |
|
| EN 14016-1-2004 |
菱鎂找平層用粘合劑.苛性鎂和氯化鎂.第1部分:定義、要求 |
|
| EN 14016-2-2004 |
菱鎂找平層用粘合劑.苛性鎂和氯化鎂.第2部分:試驗方法 |
|
| EN 14019-2004 |
幕墻.耐沖擊性.性能要求 |
|
| EN 14020-1-2002 |
增強物紡織玻璃纖維纖維粗紗的規格第1部分：命名 |
Reinforcements - Specification for textile glass rovings - Part 1: Designation |
| EN 14020-2-2002 |
增強物紡織玻璃纖維粗紗的規格第2部分：檢驗方法和一般要求 |
Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements |
| EN 14020-3-2002 |
增強物紡織玻璃纖維粗紗的規格第2部分：特殊要求 |
Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements |
| EN 140201-1996 |
空白詳細規范：功率型固定電阻器(評定水平S) |
Blank detail specification: Fixed power resistors (Assessment level S) |
| EN 140202-1996 |
空白詳細規范：功率型固定電阻器(評定水平M) |
Blank detail specification: Fixed power resistors (Assessment level M) |
| EN 140203-1996 |
空白詳細規范：功率型固定電阻器(評定水平H) |
Blank detail specification: Fixed power resistors (Assessment level H) |
| EN 140210-1994 |
分規范：功率型固定電阻器能力批準 |
Sectional specification: Fixed power resistors - Capability approval |
| EN 140211-1994 |
空白詳細規范：功率型固定電阻器能力批準 |
Blank detail specification: Fixed power resistors - Capability approval |
| EN 14022-2003 |
建筑用粘合劑多成分粘合劑的適用期（工作壽命）的測定 |
Structural Adhesives - Determination of the pot life (working life) of multicomponent adhesives |
| EN 14024-2004 |
帶保溫層的金屬異型材.機械特性.要求、驗證和評定試驗 |
|
| EN 1403-1998 |
金屬腐蝕防護 電鍍涂層 規定一般要求的方法 |
Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements |
| EN 14030-2001 |
土工布和土工布相關產品耐酸和堿液體性測定的篩選試驗方法 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids (ISO/TR 12960:1998, modified) |
| EN 14031-2003 |
工作環境空氣中有毒氣體的測定 |
Workplace atmospheres - Determination of airborne endotoxin |
| EN 14034-1-2004 |
的測定 |
EN 14034-1-2004 |
| EN 14034-4-2004 |
塵云的爆炸特性測定.第4部分:塵云的極限氧氣濃度LOC的測定 |
|
| EN 14035-1-2003 |
煙花第1部分：術語 |
Fireworks - Part 1: Terminology |
| EN 14035-10-2004 |
焰火.第10部分:雙響爆竹.規范和試驗方法 |
|
| EN 14035-12-2003 |
煙花第12部分：閃光爆竹和閃光爆竹串規范和試驗方法 |
Fireworks - Part 12: Flash bangers and flash banger batteries; Specification and test methods |
| EN 14035-13-2004 |
焰火.第13部分:閃光彈.規范和試驗方法 |
|
| EN 14035-15-2003 |
煙花第15部分中心貯藥室試驗方法和規范 |
Fireworks - Part 15: Fountains; Specification and test methods |
| EN 14035-17-2004 |
焰火.第17部分:地面旋轉類.規范和試驗方法 |
|
| EN 14035-19-2003 |
煙花 第19部分：手持式煙火規范和試驗方法 |
Fireworks - Part 19: Hand-held sparklers; Specification and test methods |
| EN 14035-2-2003 |
煙花第2部分：分類 |
Firewoks - Part 2: Categorisation |
| EN 14035-22-2004 |
焰火.第22部分:煙火.規范和試驗方法 |
|
| EN 14035-23-2003 |
煙花第23部分：非手持焰火試驗方法和規范 |
Fireworks - Part 23: Non-hand-held sparklers; Specification and test methods |
| EN 14035-24-2004 |
焰火.第24部分:噴花棒.規范和試驗方法 |
|
| EN 14035-27-2003 |
煙花第27部分：火箭式投射器試驗方法和與規范 |
Fireworks - Part 27: Rockets; Specification and test methods |
| EN 14035-28-2004 |
焰火.第28部分:羅馬蠟燭.規范和試驗方法 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com