標準號 |
中文名稱 |
英文名稱 |
| EN 24501-1993 |
硬質合金 鈦含量的測定 過氧化物光度法 |
Hardmetals - Determination of titanium - Photometric peroxide method (ISO 4501:1978) |
| EN 24503-1993 |
硬質合金 用X射線熒光測定金屬素的含量 熔化法 |
Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method (ISO 4503:1978) |
| EN 24505-1993 |
硬質合金 孔隙度和游離碳的金相測定 |
Hardmetals - Metallographic determination of porosity and uncombined carbon (ISO 4505:1978) |
| EN 24506-1993 |
硬質合金 壓縮試驗 |
Hardmetals; compression test (ISO 4506:1979) |
| EN 24565-1989 |
小艇 錨鏈 |
Small craft - Anchor chains (ISO 4565:1986) |
| EN 246-2003 |
衛生用水龍頭 流速調節器通用規范 |
Sanitary tapware - General specifications for flow rate regulators |
| EN 24641-1993 |
給水和排水用橡膠軟管 規范 |
Rubber hoses for water and discharge; specification (ISO 4641:1991) |
| EN 247-1997 |
熱交換器 術語 |
Heat exchangers - Terminology |
| EN 24766-1992 |
開槽平端緊定螺釘 |
Slotted set screws with flat point (ISO 4766:1983) |
| EN 248-2002 |
衛生用水龍頭 鎳鉻電鍍層通用技術規范 |
Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr |
| EN 24829-1-1990 |
鋼和鑄鐵 全硅量的測定 硅鉬藍分光光度法 第1部分:硅含量在0.05-1.0之間 |
Steel and cast iron; determination of total silicon content; reduced molybdosilicate spectrophotometric method; part 1: silicon content between 0.05 and 1 % |
| EN 24829-2-1990 |
鋼和鑄鐵 全硅量的測定 硅鉬藍分光光度法 第2部分:硅含量在0.01-0.05%之間 |
Steel and cast iron; determination of total silicon content; reduced molybdosilicate spectrophotometric method; part 2: silicon content between 0.01 and 0.05 % |
| EN 2484-1989 |
航空航天系列 圖紙的縮微膠片 35mm縮微膠片穿孔卡 |
Aerospace series - Microfilming of drawings - Aperture card for 35 mm microfilm |
| EN 24869-1-1992 |
聲學 護聽器 第1部分:聲衰減測量的主觀法 |
Acoustics; hearing protectors; subjective method for the measurement of sound attentuation (ISO 4869-1:1990) |
| EN 24869-3-1993 |
聲學 聽力器 第3部分:質量檢驗用耳罩式護聽器插入損失測量的簡易方法 |
Acoustics; Hearing protectors; Part 3: Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes (ISO/TR 4869-3:1989) |
| EN 24883-1993 |
硬質合金 用X射線熒光測定金屬素的含量 溶液法 |
Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Solution method (ISO 4883:1978) |
| EN 24884-1993 |
硬質合金 用燒結試件進行粉未的取樣和試驗 |
Hardmetals; sampling and testing of powders using sintered test pieces (ISO 4884:1978) |
| EN 2489-1995 |
航空航天系列 纖維增強塑料 試驗液體影響的測定 |
Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids |
| EN 2491-1997 |
航空航天系列 二硫化鉬基上的干膜潤滑油 涂層法 |
Aerospace series - Molybdenum disulphide dry lubricants - Coating methods |
| EN 24920-1992 |
紡織品 織物抗表面沾濕(噴淋試驗)性的測定 |
Textiles; determination of resistance to surface wetting (spray test) of fabrics |
| EN 24934-1989 |
鋼和鑄鐵 硫含量的測定 重量法 |
Steel and cast iron; determination of sulfur content; gravimetric method (ISO 4934, 1st edition 1980.10.01) |
| EN 24935-1991 |
鋼和鐵 硫含量的測定 感應爐內燃燒后紅外線吸收法 |
Steel and iron; determination of sulfur content; infrared absorption method after combustion in an induction furnace (ISO 4935:1989) |
| EN 24937-1990 |
鋼和鐵 鉻含量的測定 電位或視覺滴定法 |
Steel and iron; determination of chromium content; potentiometric or visual method |
| EN 24938-1990 |
鋼和鐵 鎳含量的測定 重量法或容量法 |
Steel and iron; determination of nickel content; gravimetric or titrimetric method |
| EN 24943-1990 |
黑色金屬的化學分析 銅含量的測定 火焰原子吸收光譜法 |
Chemical analysis of ferrous metal; determination of copper content; flame atomic absorption spectrometric method |
| EN 24946-1990 |
鋼和鑄鐵中銅含量的測定 |
Determination of copper content in steel and cast iron |
| EN 24947-1991 |
鋼和鑄鐵 釩含量的測定 電位滴定法 |
Steel and cast iron; determination of vanadium content; potentiometric titration method (ISO 4947:1986) |
| EN 2495-1990 |
航空航天系列 溫度補償額定電流為25A及以下的單極電路斷路器 產品標準 |
Aerospace series - Single-pole circuit breakers temperature compensated rated currents up to 25 A - Product standard |
| EN 2497-1989 |
航空航天系列 鈦與鈦合金干噴砂 |
Aerospace series - Dry abrasive blasting of titanium and titanium alloys |
| EN 2498-1990 |
航空航天系列 自潤滑襯套和螺紋柄可自動調心普通軸承操縱桿端 尺寸和規范 |
Aerospace series; rod ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads |
| EN 2499-1987 |
航空航天系列 計算機輸出縮微膠片(COM)A6縮微膠片 |
Aerospace series. Computer output microfiche (COM). A6 microfiche |
| EN 250-2000 |
呼吸設備 開路獨立壓縮空氣潛水器具 要求、測試、標志 |
Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking |
| EN 25077-1993 |
紡織品 洗滌干燥后尺寸變化的測定 |
Textiles; determination of dimensional change in washing and drying (ISO 5077:1984) |
| EN 251-2003 |
淋浴槽 連接尺寸 |
Shower trays - Connecting dimensions |
| EN 2515-1990 |
航空航天系列 可調單叉和螺紋柄操縱桿端 尺寸和負荷 |
Aerospace series - Rod ends, adjustable single fork and threaded shank - Dimensions and loads |
| EN 2516-1997 |
航空航天系列 耐蝕鋼鈍化和鎳基合金純化 |
Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel base alloys |
| EN 25163-1993 |
汽車和航空燃料 爆震特性的測定 馬達法 |
Motor and aviation-type fuels; determination of knock characteristics; motor method (ISO 5163:1990) |
| EN 25164-1993 |
發動機燃料 燃料的爆震特性的測定 研究法 |
Motor fuels; determination of knock characteristics; research method (ISO 5164:1990) |
| EN 25184-1994 |
電阻點焊直電極 |
Straight resistance spot welding electrodes (ISO 5184:1979) |
| EN 252-1989 |
測定與地面接觸的木材防腐劑相關防護效果的野外試驗方法 |
Field test method for determining the relative protective effectiveness of a wood preservative in ground contact |
| EN 25264-3-1994 |
紙漿 實驗室打漿 第3部分::約克羅(Jokro)磨法 |
Pulps - Laboratory beating - Part 3: Jokro mill method (ISO 5264-3:1979) |
| EN 253-2003 |
分區供暖管 直接掩埋熱水網用預隔熱連接的管道系統 成套鋼鐵管道設備的管組件、聚氨酯熱絕緣和聚乙烯外覆 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
| EN 2536-1995 |
航空航天系列 鋁合金的硬陽極氧化處理 |
Aerospace series - Hard anodizing of aluminium alloys |
| EN 2544-1987 |
航空航天系列 航空航天設備圖紙上鉚釘?shù)谋硎痉?/td>
| Aerospace series - Representation of rivets on drawings for aerospace equipment |
| EN 2545-1-1995 |
航空航天系列 鈦和鈦合金再熔坯料和鑄件 技術規范 第1部分:一般要求 |
Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 1: General requirements |
| EN 2545-2-1995 |
航空航天系列 鈦和鈦合金再熔坯料和鑄件 技術規范 第2部分:再熔坯料 |
Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 2: Remelting stock |
| EN 2545-3-1995 |
航空航天系列 鈦和鈦合金制再熔坯料和鑄件 技術條件 第3部分:預制鑄件和產品鑄件 |
Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 3: Pre-production and production castings |
| EN 2547-1987 |
航空航天系列 文件膠片 105mm縮微膠片(縮微膠片A6) |
Aerospace series - Filming of documents - Microfilm 105 mm (Microfiche A6) |
| EN 2549-1995 |
標準號: |
中文標題: |
| EN 255-1-1997 |
帶電驅動壓縮機的空調器、液體制冷設備和熱力泵 加熱方式 第1部分:術語、定義和標識 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 1: Terms, definitions and designations |
| EN 255-2-1997 |
帶電驅動壓縮機的空調器、液體制冷設備和熱力泵 加熱方式 第2部分:對空間加熱裝置作標志用測試和要求 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 2: Testing and requirements for marking for space heating units |
| EN 255-3-1997 |
帶電驅動壓縮機的空調器、液體制冷設備和熱力泵 加熱方式 第3部分:對衛生間熱水裝置作標志的測試和要求 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units |
| EN 255-4-1997 |
帶電驅動壓縮機的空調器、液體制冷設備和熱力泵 加熱方式 第4部分:空間加熱裝置和衛生間熱水裝置的要求 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 4: Requirements for space heating and sanitary hot water units |
| EN 2557-1997 |
航空航天系列碳纖維預浸漬物單位面積質量的測定 |
Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area |
| EN 2558-1997 |
航空航天系列碳纖維預浸漬物揮發物含量測定 |
Aerospace series - Carbon fibre preimpregnates - Determination of the volatile content |
| EN 25580-1992 |
無損檢測 工業射線照相底片觀光燈 最低要求 |
Non-destructive testing; Industrial radiographic illuminators; Minimum requirements (ISO 5580:1985) |
| EN 2559-1997 |
航空航天系列碳纖維預浸漬物樹脂成分樹脂和纖維含量及單位面積纖維質量的測定 |
Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area |
| EN 2560-1998 |
航空航天系列個人眼睛保護設備有可變遮避物或雙層遮避物的焊接濾光鏡 |
Aerospace series - Carbon fibre preimpregnates - Determination of the resin flow |
| EN 2561-1995 |
航空航天系列碳纖維增強塑料單向塑料層壓制品纖維方向平行抗拉試驗 |
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction |
| EN 2562-1997 |
航空航天系列碳纖維增強塑料單向?qū)訅核芰吓c纖維方向平行的彎曲試驗 |
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction |
| EN 2563-1997 |
航空航天系列碳纖維增強塑料單向?qū)訅喊鍖娱g表面剪切強度的測定 |
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Determination of the apparent interlaminar shear strength |
| EN 2564-1998 |
航空航天系列碳纖維疊層板材纖維、樹脂含量和空隙率的測定 |
Aerospace series - Carbon fibre laminates - Determination of the fibre, resin and void contents |
| EN 25663-1993 |
水質 凱氏氮的測定 加硒礦化作用法 |
Water quality; Determination of Kjeldahl nitrogen; Method after mineralization with selenium (ISO 5663:1984) |
| EN 25667-1-1993 |
水質 取樣 第1部分:采樣方案設計指南 |
Water quality; Sampling; Part 1: Guidance on the design of sampling programmes (ISO 5667-1:1980) |
| EN 25667-2-1993 |
水質 取樣 第2部分:采樣技術指南 |
Water quality; Sampling; Part 2: Guidance on sampling techniques (ISO 5667-2:1991) |
| EN 2569-1991 |
航空航天系列控制鋼索配件和轉筒技術規范 |
Aerospace series; control cable fittings and turnbarrels; technical specification |
| EN 257-1992 |
燃?xì)馄骶哂脵C械恒溫器 |
Mechanical thermostats for gas-bruning appliances |
| EN 2570-1996 |
航空航天系列鎳鎘電池技術規范 |
Aerospace series - Nickel-cadmium batteries - Technical specification |
| EN 2574-1990 |
航空航天系列焊接規范制圖資料 |
Aerospace series; welds; information on drawings |
| EN 2575-1989 |
航空航天系列文件攝影規范16mm縮微膠片 |
Aerospace series; filming of documents; 16 mm microfilm |
| EN 25754-1993 |
燒結金屬材料 不包括硬質金屬 無切口沖擊試樣 |
Sintered metal materials, excluding hardmetals; unnotched impact test piece (ISO 5754:1978) |
| EN 25813-1992 |
水質 溶解氧的測定 碘量法 |
Water quality; Determination of dissolved oxygen; Iodometric method (ISO 5813:1983) |
| EN 25814-1992 |
水質 容解氧的測定 電化學探頭法 |
Water quality; Determination of dissolved oxygen; Electrochemical probe method (ISO 5814:1990) |
| EN 25817-1992 |
鋼弧焊接頭 缺點質量分級指南 |
Arc-welded joints in steel; guidance on quality levels for imperfections (ISO 5817:1992) |
| EN 25821-1991 |
電阻點焊電極帽接頭 |
Resistance spot welding, electrode caps (ISO 5821:1979) |
| EN 25822-1991 |
點焊設備 錐形塞規和環規 |
Spot welding equipment- Taper plug gauges and taper ring gauges (ISO 5822:1988) |
| EN 25827-1992 |
點焊 電極座和電極夾 |
Spot welding- Electrode back-ups and clamps (ISO 5827:1983) |
| EN 2583-1997 |
航空航天系列NI-PH2601(鉻鎳鐵合金718)耐熱鎳基合金MJ螺紋螺栓等級:1275MPa( 環境溫度)/650℃技術規 |
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃ - Technical specification |
| EN 2584-2001 |
航空航天系列具有自潤滑軸套的球面防腐鋼軸承窄系列環境溫度下的高負荷尺寸和負荷 |
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series; Elevated load at ambient temperature; Dimensions and loads |
| EN 2585-2001 |
航空航天系列具有自潤滑軸套的球面防腐鋼軸承寬系列環境溫度下的高負荷尺寸和負荷 |
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series; Elevated load at ambient temperature; Dimensions and loads |
| EN 2586-1991 |
航空航天系列飛行駕駛桿用墊片、鎖 尺寸 |
Aerospace series - Wwashers, lock for flight control rods - Dimensions |
| EN 2587-1990 |
航空航天系列可調螺紋柄操縱桿尺寸和負荷 |
Aerospace series - Rod ends, adjustable double fork and threaded shank - Dimensions and loads |
| EN 259-1-2001 |
卷式墻面飾層 重負載墻面飾層 第1部分:規范 |
Wallcoverings in roll form - Heavy duty wallcoverings - Part 1: Specifications |
| EN 259-2-2001 |
卷式墻面飾層 重負載墻面飾層 第2部分:沖擊阻力的測定 |
Wallcoverings in roll form - Heavy duty wallcoverings - Part 2: Determination of impact resistance |
| EN 2591-101-1994 |
航空航天系列光電連接件試驗方法第101部分:目視檢查 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| EN 2591-1992 |
航空航天系列 光電連接件 試驗方法 總則 |
Aerospace series; elements of electrical and optical connection; test methods; general |
| EN 2591-201-1996 |
航空航天系列光電連接件試驗方法第201部分:接觸電阻低級 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 201: Contact resistance - Low level |
| EN 2591-202-1996 |
航空航天系列光電連接件試驗方法第202部分:額定電流時的接觸電阻 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 202: Contact resistance at rated current |
| EN 2591-203-1996 |
航空航天系列光電連接件試驗方法第203部分:微伏級時的電路連續性 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 203: Electrical continuity at microvolt level |
| EN 2591-204-1996 |
航空航天系列光電連接件試驗方法第204部分:在微秒內的中斷接觸 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 204: Discontinuity of contacts in the microsecond range |
| EN 2591-205-1996 |
航空航天系列光電連接件試驗方法第205部分:屏蔽套電路連續性 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 205: Housing (shell) electrical continuity |
| EN 2591-206-1996 |
航空航天系列光電連接件試驗方法第206部分:絕緣電阻的測量 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 206: Measurements of insulation resistance |
| EN 2591-207-1996 |
航空航天系列光電連接件試驗方法第207部分:電壓校驗 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 207: Voltage proof test |
| EN 2591-208-1996 |
航空航天系列光電連接件試驗方法第208部分:由額定電流而造成的升溫 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 208: Temperature rise due to rated current |
| EN 2591-209-1996 |
航空航天系列光電連接件試驗方法第209部分:現行溫度引起的額定值降低 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 209: Current temperature derating |
| EN 2591-210-1998 |
航空航天系列光電連接件試驗方法第210部分:過電荷載 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 210: Electrical overload |
| EN 2591-211-2002 |
航空航天系列光電連接件試驗方法第211部分:電容 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 211: Capacitance |
| EN 2591-213-1997 |
航空航天系列光電連接件試驗方法第213部分: 從100 MHz至 1 GHz屏蔽效率 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz |
| EN 2591-216-1997 |
航空航天系列光電連接件試驗方法第216部分:.連接咬合深度 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 216: Engagement depth of contacts |
| EN 2591-217-2002 |
航空航天系列光電連接件試驗方法第217部分:.在規定接線接片和在線接頭電流內的電壓降 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 217: Voltage drop under specified current for terminal lugs and in-line splices |
| EN 2591-218-2002 |
航空航天系列光電連接件試驗方法第218部分:溫度和電流循環變化使接線按片和在線接頭引起老化 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling |
| EN 2591-219-2002 |
航空航天系列光電連接件試驗方法第219部分:絕緣接線按片和在線接頭電壓強度 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 219: Voltage strength for insulated terminal lugs and in-line splices |
| EN 2591-301-1996 |
航空航天系列光電連接件試驗方法第301部分:溫度耐受性 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 301: Endurance at temperature |
| EN 2591-302-1997 |
航空航天系列光電連接件試驗方法第302部分:氣候關系 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 302: Climatic sequence |
| EN 2591-303-1997 |
航空航天系列光電連接件試驗方法第303部分:.低溫/低壓和濕熱 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 303: Cold/low pressure and damp heat |
| EN 2591-304-1997 |
航空航天系列光電連接件試驗方法第304部分:穩態濕熱 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 304: Damp heat steady state |
| EN 2591-305-1997 |
航空航天系列光電連接件試驗方法第305部分:快速溫度變化 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 305: Rapid change of temperature |
| EN 2591-306-1998 |
航空航天系列光電連接件試驗方法第306部分:長霉 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 306: Mould growth |
| EN 2591-307-1998 |
航空航天系列光電連接件試驗方法第307部分:鹽霧 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| EN 2591-308-1998 |
航空航天系列光電連接件試驗方法第308部分:沙塵和灰塵 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 308: Sand and dust |
| EN 2591-309-1997 |
航空航天系列光電連接件試驗方法第309部分:干熱 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 309: Dry heat |
| EN 2591-310-1998 |
航空航天系列光電連接件試驗方法第310部分:低溫 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 310: Cold |
| EN 2591-311-1997 |
航空航天系列光電連接件試驗方法第311部分:低氣壓 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 311: Low air pressure |
| EN 2591-312-1997 |
航空航天系列光電連接件試驗方法第312部分:漏氣量 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage |
| EN 2591-313-1997 |
航空航天系列光電連接件試驗方法第313部分:人工降雨 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 313: Artificial rain |
| EN 2591-314-1997 |
航空航天系列光電連接件試驗方法第314部分:低氣壓浸入 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 314: Immersion at low air pressure |
| EN 2591-315-1998 |
航空航天系列光電連接件試驗方法第315部分:流體阻力 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
| EN 2591-316-1997 |
航空航天系列光電連接件試驗方法第316部分:抗臭氧 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 316: Ozone resistance |
| EN 2591-317-1998 |
航空航天系列光電連接件試驗方法第317部分:易燃性 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 317: Flammability |
| EN 2591-318-1998 |
航空航天系列光電連接件試驗方法第318部分:阻燃性 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance |