標準號 |
中文名稱 |
英文名稱 |
| EN 12522-1-1998 |
家具可搬動性私用家具搬運第1部分：服務規范 |
Furniture removal activities - Furniture removal for private individuals - Part 1: Service specification |
| EN 12522-2-1998 |
家具可搬動性私用家具搬運第2部分：服務條款 |
Furniture removal activities - Furniture removal for private individuals - Part 2: Provision of service |
| EN 12523-1999 |
外肢修復和外肢矯形要求和試驗方法 |
External limb prostheses and external orthoses - Requirements and test methods |
| EN 12524-2000 |
建筑材料和產品濕熱特性表列設計值 |
Building materials and products - Hygrothermal properties - Tabulated design values |
| EN 12525-2000 |
農用機械前裝載機安全 |
Agricultural machinery - Front loaders - Safety |
| EN 12526-1998 |
腳輪和輪子詞匯推薦用符號和多語種詞表 |
Castors and wheels - Vocabulary, recommended symbols and multilingual dictionary |
| EN 12527-1998 |
腳輪和輪子試驗方法和試驗設備 |
Castors and wheels - Test methods and apparatus |
| EN 12528-1998 |
腳輪和輪子家具用腳輪要求 |
Castors and wheels - Castors for furniture - Requirements |
| EN 12529-1998 |
腳輪和輪子家具用腳輪轉椅用腳輪要求 |
Castors and wheels - Castors for furniture - Castors for swivel chairs - Requirements |
| EN 1253-1-2003 |
建筑物排水裝置 第1部分：要求 |
Gullies for buildings - Part 1: Requirements |
| EN 1253-2-1998 |
建筑物排水裝置 第2部分：試驗方法 |
Gullies for buildings - Part 2: Test methods |
| EN 1253-3-1999 |
建筑物排水裝置 第3部分：質量控制 |
Gullies for buildings - Part 3: Quality control |
| EN 1253-4-1999 |
建筑物排水裝置 第4部分：通路蓋 |
Gullies for buildings - Part 4: Access covers |
| EN 12530-1998 |
腳輪和輪子手動操作規定用的腳輪和輪子 |
Castors and wheels - Castors and wheels for manually propelled institutional applications |
| EN 12531-1998 |
腳輪和輪子病床用腳輪 |
Castors and wheels - Hospital bed castors |
| EN 12532-1998 |
腳輪和輪子速度在1.1M/S(4km/h小時)以下的運輸裝置用輪子和腳輪 |
Castors and wheels - Castors and wheels for applications up to 1,1 m/s (4 km/h) |
| EN 12533-1998 |
腳輪和輪子速度在1.1m/s(4km/h)以上,4.4M/S(16km/h時)以下運輸裝置用的腳輪和輪子 |
Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h) |
| EN 12534-1999 |
焊接消耗品高強度鋼氣體保護金屬電弧焊用絲狀電極、焊絲和焊條和沉漬物 分類 |
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - Classification |
| EN 12535-2000 |
焊接消耗品高強度鋼氣體保護金屬電弧焊用管型藥芯焊條分類 |
Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels - Classification |
| EN 12536-2000 |
焊接消耗品非合金鋼和抗蠕變鋼氣焊用焊條分類 |
Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification |
| EN 1254-1-1998 |
銅和銅合金 管件 第1部分：低溫焊接或纖焊接到銅管上的毛細管用端頭管件 |
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 1254-2-1998 |
銅和銅合金 管件 第2部分：銅管用壓接端頭管件 |
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| EN 1254-3-1998 |
銅和銅合金 管件 第3部分：塑料管用壓接端頭管件 |
Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| EN 1254-5-1998 |
銅和銅合金 管件 第5部分：纖焊到銅管的毛細管用短端頭管件 |
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
| EN 12540-2000 |
金屬的防腐鎳、鎳+鉻、銅+鎳和銅+鎳+鉻的電沉漬鍍層 |
Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium |
| EN 125400-1991 |
分規范:用于電感器和調諧變壓器中的磁性氧化磁芯的調節器 |
Sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers |
| EN 125401-1991 |
空白詳細規范：用于電感器和調諧變壓器中的磁性氧化(鐵氧體)磁芯的調節器 |
Blank detail specification - Adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers |
| EN 12541-2002 |
衛生間水龍頭 壓力沖洗閥和自動關閉小便池沖洗閥PN10 |
Sanitary tapware - Pressure flushing valves und automatic closing urinal valves PN 10 |
| EN 12542-2002 |
標準號： |
中文標題： |
| EN 12542-2004 |
的系列生產的液化石油氣儲存用固定焊接的圓柱形鋼罐.設計和制造 |
EN 12542-2004 |
| EN 12543-1-1999 |
無損檢驗用于無損檢驗的工業X射線系統中焦點的特性第1部分：掃描方法 |
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method |
| EN 12543-2-1999 |
無損檢驗用于無損檢驗的工業X射線系統中焦點的特性 第2部分：針孔攝影機 射線照相方法 |
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method |
| EN 12543-3-1999 |
無損檢驗用于無損檢驗的工業X射線系統中焦點的特性第3部分：狹縫攝影機射線照相方法 |
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method |
| EN 12543-4-1999 |
無損檢驗用于無損檢驗的工業X射線系統中焦點的特性第4部分：邊緣方法 |
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method |
| EN 12543-5-1999 |
無損檢驗用于無損檢驗的工業X射線系統中焦點的特性第5部分：小型和微型 聚焦X射線管有效焦點尺寸的測量 |
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes |
| EN 12544-1-1999 |
無損檢驗X射線管電壓的評估和測量第1部分：分壓器法 |
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method |
| EN 12544-2-2000 |
無損檢驗X射線管電壓的測量與評定第2部分：用厚過濾器進行定期檢查 |
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method |
| EN 12544-3-1999 |
無損檢驗X射線管電壓的評估和測量 第3部分：光譜法 |
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method |
| EN 12545-2000 |
鞋類、皮革和人造革制品的加工機械噪聲試驗規則通用要求 |
Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements |
| EN 12546-1-2000 |
與食品接觸的物品及材料家用保溫容器第１部分：真空器皿、保溫瓶和保溫壺規范 |
Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs |
| EN 12546-2-2000 |
與食品接觸的物品及材料家用保溫容器第２部分：保溫袋和保溫箱（盒）規范 |
Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 2: Specification for insulated bags and boxes |
| EN 12546-3-2000 |
與食品接觸的物品及材料家用保溫容器第３部分：:熱容器規范 |
Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 3: Specification for thermal packs |
| EN 12547-1999 |
離心機通用安全要求 |
Centrifuges - Common safety requirements |
| EN 12548-1999 |
鉛和鉛合金電纜鈹和護套用鉛合金鑄錠 |
Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves |
| EN 12549-1999 |
聲學緊固件驅動工具的噪聲試驗規則工程法 |
Acoustics - Noise test code for fastener driving tools - Engineering method |
| EN 1255-1995 |
內河航行船舶 旋臂吊桿 |
Inland navigation vessels - Swing derricks |
| EN 125500-1996 |
分規范:抑制干擾和低電平信號變壓器用環形磁性氧化磁芯 |
Sectional specification: Magnetic oxide ring cores for interference suppression and low level signal transformer applications |
| EN 1256-1996 |
氣焊設備 焊接切割及類似加工設備的軟管附件規范 |
Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
| EN 12560-1-2001 |
法蘭和其接頭指定等級的法蘭墊片第1部分：帶或不帶墊圈的非金屬法蘭墊片 |
Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
| EN 12560-2-2001 |
法蘭和其接頭指定等級的法蘭墊片第2部分：鋼制法蘭用螺旋形墊片 |
Flanges and their joints - Gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
| EN 12560-3-2001 |
法蘭和其接頭指定等級的法蘭墊片第3部分：非金屬PTFE封套墊片 |
Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets |
| EN 12560-4-2001 |
法蘭和其接頭指定等級的法蘭墊片第4部分：鋼法蘭用波紋狀、平或插榫金屬墊片 |
Flanges and their joints - Gaskets for Class-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges |
| EN 12560-5-2001 |
法蘭和其接頭指定等級的法蘭墊片第5部分：鋼法蘭用金屬環接合墊片 |
Flanges and their joints - Gaskets for Class-designated flanges - Part 5: Metallic ring joint gaskets for use with steel flanges |
| EN 12560-7-2004 |
法蘭及其接頭.等級標示法蘭用墊圈.第7部分:與鋼法蘭一起使用的金屬涂覆有套墊圈 |
|
| EN 12561-1-1998 |
鐵路用槽車第1部分：危險貨物運輸槽車車標記 |
Railway applications - Tank wagons - Part 1: Marking of tank wagons for the carriage of dangerous goods |
| EN 12561-2-2002 |
鐵路用 罐車第2部分：含蒸汽回流的液體產品用罐底排空裝置 |
Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
| EN 12561-3-2002 |
鐵路用 油罐車第3部分：加壓液化氣體用罐底加注和排空裝置 |
Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquified under pressure |
| EN 12561-4-2002 |
鐵路用 油罐車第4部分：液體產品罐頂排空和加注的裝置 |
Railway applications - Tank wagons - Part 4: Top devices for top emptying and filling of liquid products |
| EN 12561-5-2002 |
鐵路用 油罐車第5部分：液體產品罐底排空和罐頂加注的罐頂裝置 |
Railway applications - Tank wagons - Part 5: Top devices for bottom emptying and top filling of liquid products |
| EN 12561-6-2002 |
鐵路用 油罐車第6部分：人孔 |
Railway applications - Tank wagons - Part 6: Manholes |
| EN 12561-7-2004 |
鐵路設施.油罐車.第7部分:月臺和梯子 |
|
| EN 12561-8-2004 |
鐵路設施.油罐車.第8部分:加熱連接裝置 |
|
| EN 12562-1999 |
紡織品對芳烴聚酰胺多絲紗線試驗方法 |
Textiles - Para-aramid multifilament yarns - Test methods |
| EN 12563-1998 |
穩定的外科植入物關節替代植入物髖關節替代植入物的特殊要求 |
Non-active surgical implants - Joint replacement implants - Specific requirements for hip joint replacement implants |
| EN 12564-1998 |
穩定的外科植入物關節替代植入物膝關節替代植入物的特殊要求 |
Non-active surgical implants - Joint replacement implants - Specific requirements for knee joint replacement implants |
| EN 12566-1-2000 |
５０ＰＴ以下小型廢水處理系統第1部分：預制化糞池 |
Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks |
| EN 12566-1/prA1-2003 |
５０ＰＴ以下小型廢水處理系統第1部分：預制化糞池修改A1 |
Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks; Amendment A1 / Note: Intended as an amendment to EN 12566-1 (2000-01). |
| EN 12567-2000 |
工業閥門LNG隔離閥適用性規范和適當檢驗測試 |
Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests |
| EN 12568-1998 |
腳和腿的保護物包頭和防金屬刺入的插入物的要求和試驗方法 |
Foot and leg protectors - Requirements and test methods for toecaps and metal penetration resistant inserts |
| EN 12570-2000 |
工業閥門操作件分級方法 |
Industrial valves - Method for sizing the operating element |
| EN 12571-1998 |
與食品接觸的材料和物品盛裝預制食品的容器的運輸裝置熱和衛生要求和試驗 |
Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing |
| EN 12572-1998 |
人造攀巖結構保護點穩定性要求和試驗方法 |
Artificial climbing structures - Protection points, stability requirements and test methods |
| EN 12573-1-2000 |
靜態無壓焊接熱塑料罐第1部分：概述 |
Welded static non-pressurized thermoplastic tanks - Part 1: General principles |
| EN 12573-2-2000 |
靜態無壓焊接熱塑料罐第2部分：立式圓筒罐的計算 |
Welded static non-pressurized thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks |
| EN 12573-3-2000 |
靜態無壓焊接熱塑料罐第3部分：單層矩形罐的設計和計算 |
Welded static non-pressurized thermoplastic tanks - Part 3: Design and calculation for single skin rectangular tanks |
| EN 12573-4-2000 |
靜態無壓焊接熱塑料罐第4部分：法蘭接頭的設計和計算 |
Welded static non-pressurized thermoplastic tanks - Part 4: Design and calculation of flanged joints |
| EN 12574-1-2002 |
固定式廢物箱第１部分：有耳軸、雙耳軸或袋式提升裝置 容量從1700L到5000L平頂或圓頂蓋的廢物箱尺寸和 |
Stationary waste containers - Part 1: Containers with a capacity from 1700 l to 5000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device; Dimensions and design / Note: To be replaced by prEN 12574-1 (2003-10) (in preparatio |
| EN 12574-2-2002 |
固定式廢物箱第2部分：性能要求和試驗方法 |
Stationary waste containers - Part 2: Performance requirements and test methods / Note: To be replaced by prEN 12574-2 (2003-10) (in preparation). |
| EN 12574-3-2002 |
固定式廢物箱第3部分：安全和衛生要求 |
Stationary waste containers - Part 3: Safety and health requirements / Note: To be replaced by prEN 12574-3 (2003-10) (in preparation). |
| EN 12575-1998 |
塑料熱固模塑物料SMC中纖維浸濕程度的測定 |
Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC |
| EN 12576-1998 |
塑料纖維增強復合物SMC、BMC和DMC的壓縮模制試驗板的制備 |
Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC |
| EN 12579-1999 |
土壤改良劑和生長培養基取樣 |
Soil improvers and growing media - Sampling |
| EN 12580-1999 |
土壤改良劑和生長培養基量值的測定 |
Soil improvers and growing media - Determination of a quantity |
| EN 12582-1999 |
表面活化劑用HPLC/ELSD法按克分子濃度測定非離子表面活化劑（乙氧基）中的聚乙二醇含量 |
Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD |
| EN 12583-2000 |
供氣系統氣壓站功能要求 |
Gas supply systems - Compressor stations - Functional requirements |
| EN 12584-1999 |
氧氣火焰切割、激光束切割和等離子體切割的缺陷術語 |
Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology |
| EN 12585-1998 |
玻璃設備、管道和配件DN15至1000管道和配件兼容性和互換性 |
Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability |
| EN 12586-1999 |
兒童用品橡皮奶頭嘴夾安全要求和試驗方法 |
Child care articles - Soother holder - Safety requirements and test methods |
| EN 12588-1999 |
鉛和鉛合金建筑物用鉛軋皮 |
Lead and lead alloys - Rolled lead sheet for building purposes |
| EN 12589-2001 |
建筑物通風送風口設備恒定及可變風速的送風口設備的空氣動力學試驗及額定性能 |
Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units |
| EN 12590-1999 |
紡織品完全或部分用合成纖維制的工業縫紉線 |
Textiles - Industrial sewing threads made wholly or partly from synthetic fibres |
| EN 12591-1999 |
瀝青和瀝青膠粘劑路面級瀝青規范 |
Bitumen and bituminous binders - Specifications for paving grade bitumens |
| EN 12592-1999 |
瀝青和瀝青膠粘劑可溶性測定 |
Bitumen and bituminous binders - Determination of solubility |
| EN 12593-1999 |
瀝青和瀝青膠粘劑費拉斯瀝青斷裂點的測定 |
Bitumen and bituminous binders - Determination of the Fraass breaking point |
| EN 12594-1999 |
瀝青和瀝青膠粘劑試樣的制備 |
Bitumen and bituminous binders - Preparation of test samples |
| EN 12595-1999 |
瀝青和瀝青膠粘劑運動粘度的測定 |
Bitumen and bituminous binders - Determination of kinematic viscosity |
| EN 12596-1999 |
瀝青和瀝青膠粘劑用真空毛細管法測定動態粘度 |
Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| EN 12597-2000 |
瀝青和瀝青膠粘劑術語 |
Bitumen and bituminous binders - Terminology |
| EN 12598-1999 |
為病人呼吸混合供氧的氧氣監控器特殊要求 |
Oxygen monitors for patient breathing mixtures - Particular requirements |
| EN 12599-2000 |
建筑物通風對交貨時已安裝好的通風和空調系統的試驗程序和測量方法 |
Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems |
| EN 126-1995 |
燃?xì)馄骶叩亩喙δ芸刂破?/td>
| Multifunctional controls for gas burning appliances |
| EN 126-2004 |
燃?xì)庠O(shè)備用多功能控制裝置 |
|
| EN 12600-2002 |
建筑玻璃擺沖試驗平板玻璃沖擊試驗方法和分類 |
Glass in building - Pendulum test - Impact test method and classification for flat glass |
| EN 12601-2001 |
活塞式內燃機驅動的發電機組安全 |
Reciprocating internal combustion engine driven generating sets - Safety |
| EN 12603-2002 |
建筑玻璃威布爾分布的玻璃強度數據擬合良好度和置信區間確定的程序 |
Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data |
| EN 12604-2000 |
工業、商業和汽車庫大門和活動門機械狀況要求 |
Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements |
| EN 12605-2000 |
工業、商業和汽車庫大門和活動門機械狀況試驗方法 |
Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods |
| EN 12606-1-1999 |
瀝青和瀝青膠粘劑石蠟含量的測定第1部分：蒸餾方法 |
Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation |
| EN 12606-2-1999 |
瀝青和瀝青膠粘劑石蠟含量的測定第2部分：萃取方法 |
Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method by extraction |
| EN 12607-1-1999 |
瀝青和瀝青膠粘劑在熱和空氣影響下抗凝固性能的測定第1部分：RTFOT方法 |
Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 1: RTFOT method |
| EN 12607-2-1999 |
瀝青和瀝青膠粘劑在熱和空氣影響下抗凝固性能的測定第2部分：TFOT方法 |
Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 2: TFOT method |
| EN 12607-3-1999 |
瀝青和瀝青膠粘劑在熱和空氣影響下抗凝固性能的測定第３部分：RFT方法 |
Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 3: RFT method |
| EN 12608-2003 |
制門和窗用未增塑聚氯乙烯（PVC—U）型材分類、要求和試驗方法 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods |
| EN 1261-1995 |
一般用途纖維繩索 大麻繩 |
Fibre ropes for general service - Hemp |
| EN 12613-2001 |
具有可視特性的地下電纜和管線用塑料報警裝置 |
Plastics warning devices for underground cables and pipelines with visual characteristics |
| EN 12614-2004 |
混凝土結構物的防護和修理用產品和系統.試驗方法.聚合物玻璃化轉變溫度的測定 |
|
| EN 12615-1999 |
混凝土結構防護和修理用制品和裝置試驗方法斜剪切強度的測定 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength |
| EN 12616-2003 |
運動場地面水滲透率測定 |
Surfaces for sports areas - Determination of water infiltration rate |
| EN 12617-1-2003 |
混凝土結構防護及修理用產品和裝置 試驗方法第1部分：聚合物和表面防護系統（SPS）的線性收縮的測定 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymer and surface protection systems (SPS) |
| EN 12617-2-2004 |
混凝土構件的保護和維修用產品和系統.試驗方法.第2部分:基于高聚物粘合劑的裂縫注入產品的收縮率 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com