標準號 |
中文名稱 |
英文名稱 |
| BS EN 2311-1990 |
具有自潤滑襯套的軸套筒的規范.技術規范 |
(Specification for bushes with self-lubricating liner - Technical specification) |
| BS EN 2318-1992 |
AL-P2024-T3511鋁合金.1,2mm≤a或D≤150mm的擠壓棒材和型材 |
(Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm) |
| BS EN 232-2003 |
浴池.連接尺寸 |
(Baths - Connecting dimensions) |
| BS EN 2326-1992 |
AL-P6082-T6鋁合金.a或D≤200mm的擠壓棒材和型材 |
(Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D) |
| BS EN 2327-1989 |
合金鋼徑向鋸齒鎖緊墊圈規范.尺寸 |
(Specification for washers, lock with radial serrations in alloy steel - Dimensions) |
| BS EN 23270-1991 |
色漆、清漆及其原料的調試溫度和濕度規范 |
(Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials) |
| BS EN 2328-1990 |
飛行操縱機構用墊片和調整片規范.尺寸 |
(Specification for washers, tab for flight control rods - Dimensions) |
| BS EN 2329-1993 |
紡織玻璃纖維預浸漬.測定單位面積質量的試驗方法 |
(Textile glass fibre preimpregnates - Test method for the determination of mass per unit area) |
| BS EN 233-1999 |
卷式壁紙.成品壁紙、乙烯基壁紙和塑料壁紙的規范 |
(Wallcoverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings) |
| BS EN 2330-1993 |
紡織玻璃纖維預浸漬. 測定揮發物質含量的試驗方法 |
(Textile glass fibre preimpregnates - Test method for the determination of the content of volatile matter) |
| BS EN 2331-1993 |
紡織玻璃纖維預浸漬.測定單位面積樹脂、纖維含量和纖維質量的試驗方法 |
(Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area) |
| BS EN 23312-1993 |
繞結金屬材料和硬質合金.楊氏模量的測定 |
(Sintered metal materials and hardmetals - Determination of Young modulus) |
| BS EN 2332-1993 |
紡織玻璃纖維預浸漬.測定樹脂.流動的試驗方法 |
(Textile glass fibre preimpregnates - Test method for the determination of the resin flow) |
| BS EN 23326-1993 |
硬質金屬規范.矯頑磁性的測定 |
(Specification for hardmetals - Determination of (the magnetization) coercivity) |
| BS EN 23327-1993 |
硬質合金.橫向斷裂強度的測定 |
(Hardmetals - Determination of transverse rupture strength) |
| BS EN 2334-1997 |
鋁和鋁合金用鉻硫酸洗液 |
(Chromic-sulphuric acid pickle of aluminium and aluminium alloys) |
| BS EN 2335-1990 |
無溝槽不銹鋼軸承關節規范.尺寸和載荷 |
(Specification for bearings-spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads) |
| BS EN 2336-1990 |
帶裝配槽的鋼制軸承關節規范.尺寸和載荷 |
(Specification for bearings-spherical plain in steel with assembly slots - Dimensions and loads) |
| BS EN 23369-1993 |
不透氣性燒結金屬材料和硬質合金.密度的測定 |
(Impermeable sintered metal materials and hardmetals - Determination of density) |
| BS EN 2337-1996 |
航空和航天.關節軸承.交貨技術條件 |
(Spherical plain bearings - Technical specification) |
| BS EN 2338-2001 |
航空航天系列.熱軋鈦和鈦合金薄板材.厚度0.8mm 6mm.尺寸 |
(Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm) |
| BS EN 2339-2001 |
航空航天系列.冷軋鈦和鈦合金薄板材.厚度0.2mm |
(Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0,2 mm) |
| BS EN 234-1997 |
卷材式墻面飾層.順序裝飾用墻面飾層規范 |
(Wallcoverings in roll form - Specification for wallcoverings for subsequent decoration) |
| BS EN 2344-2001 |
航空航天系列.耐熱合金加工的圓形棒材.直徑大于10mm小于180mm.尺寸 |
(Aerospace series - Round bars, machined in heat resisting alloys - Diameter 10 mm) |
| BS EN 2348-1989 |
操縱鋼索組件規范.技術規范 |
(Specification for control cable assemblies - Technical specification) |
| BS EN 235-2002 |
墻壁紙.詞匯和符號 |
(Wallcoverings - Vocabulary and symbols) |
| BS EN 2350-1991 |
電路斷路器.技術規范 |
(Circuit breakers - Technical specification) |
| BS EN 2353-1989 |
防腐鋼控制轉筒規范.尺寸和荷載 |
(Specification for turnbarrels, control cable in corrosion resisting steel - Dimensions and loads) |
| BS EN 2354-1989 |
防腐鋼螺紋有眼端操縱鋼索規范.尺寸和負載 |
(Specification for eye-ends, threaded, control cable in corrosion resisting steel - Dimensions and loads) |
| BS EN 2355-1989 |
防腐鋼叉端、螺紋、操縱鋼索規范.尺寸和負載 |
(Specification for fork-ends, threaded, control cable in corrosion resisting steel - Dimensions and loads) |
| BS EN 2356-1989 |
滾動軸承用防腐鋼叉端螺紋操縱鋼索規范.尺寸和負載 |
(Specification for fork-ends threaded, control cable for rolling bearings in corrosion resisting steel - Dimensions and loads) |
| BS EN 2357-1989 |
型鍛防腐鋼螺柱端操縱鋼索規范.尺寸和負載 |
(Specification for stud-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads) |
| BS EN 2358-1989 |
型鍛防腐鋼眼端操縱鋼索規范.尺寸和負載 |
(Specification for eye-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads) |
| BS EN 2359-1989 |
型鍛防腐鋼叉端操縱鋼索規范.尺寸和負載 |
(Specification for fork-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads) |
| BS EN 2360-1989 |
型鍛防腐鋼軸承用叉端操縱鋼索規范.尺寸和負載 |
(Specification for fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable - Dimensions and loads) |
| BS EN 2361-1989 |
型鍛防腐鋼雙柄球端操縱鋼索規范.尺寸和負載 |
(Specification for ball-ends, double shank in corrosion resisting steel swaged on type, control cable - Dimensions and loads) |
| BS EN 2362-1989 |
型鍛防腐鋼圓頭端操縱鋼索規范.尺寸和負載 |
(Specification for ball-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads) |
| BS EN 2363-1989 |
操縱鋼索螺套鎖緊夾子規范.尺寸 |
(Specification for locking clips for turnbuckles of control cables - Dimensions) |
| BS EN 2364-1989 |
剪切器頭銷緊公差規范 |
(Specification for pins, shear headed, close tolerance) |
| BS EN 2365-1989 |
鋁合金軸環規范 |
(Specification for collars, aluminium alloy) |
| BS EN 23661-1993 |
端吸式離心泵的底板和安裝尺寸 |
(End-suction centrifugal pumps - Baseplate and installation dimensions) |
| BS EN 2367-1990 |
EN2573鋼制開口銷規范 |
(Specification for split pins in steel EN 2573) |
| BS EN 237-1996 |
石油及其產品的試驗方法.液態石油產品.汽油.用原子吸收光譜法測定低鉛濃度 |
(Methods of test for petroleum and its products - Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry) |
| BS EN 2374-1991 |
玻璃纖維加強的壓制件和夾層復合件.試驗板的生產 |
(Specification for glass fibre reinforcing mouldings and sandwich composites - Production of test panels) |
| BS EN 2375-1992 |
樹脂預浸漬材料.批次抽樣方法 |
(Resin preimpregnated materials - Production batch sampling procedure) |
| BS EN 23758-1994 |
紡織品.使用符號的保養標簽規則 |
(Textiles - Care labelling code using symbols) |
| BS EN 2377-1989 |
玻璃纖維增強塑料規范.試驗方法.表面層間剪切強度測定 |
(Specification for glass fibre reinforced plastics - Test method - Determination of apparent interlaminar shear strength) |
| BS EN 2378-1995 |
纖維增強塑料.通過浸入測定吸水量 |
(Fibre reinforced plastics - Determination of water absorption by immersion) |
| BS EN 238-1996 |
石油及其產品的試驗方法.液態石油產品.汽油.用紅外光譜法測定苯含量 |
(Methods of test for petroleum and its products - Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry) |
| BS EN 2381-1992 |
AL-P7009-T7452鋁合金.40mm≤a≤150mm的手工鍛件 |
(Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm) |
| BS EN 2384-1992 |
AL-P2014-T6511鋁合金.a或D≤150mm的擠壓棒材和型材 |
(Aluminium alloy AL-P2014A-T6511 - Extruded bars and sections a or D) |
| BS EN 2385-1992 |
AL-P7009-T74511鋁合金.a或D≤125mm的擠壓棒材和型材 |
(Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D) |
| BS EN 23878-1993 |
硬質合金維氏硬度試驗 |
(Hardmetals - Vickers hardness test) |
| BS EN 23907-1993 |
硬質金屬碳總含量的測定.重量測定法 |
(Hardmetals - Determination of total carbon content - Gravimetric method) |
| BS EN 23908-1993 |
硬質合金.不溶性(游離)碳含量的測定.重量分析法 |
(Hardmetals - Determination of insoluble (free) carbon content - Gravimetric method) |
| BS EN 23909-1994 |
硬質合金.鈷含量的測定.電位滴定法 |
(Hardmetals - Determination of cobalt - Potentiometric method) |
| BS EN 23923-1-1993 |
金屬粉末.表觀密度的測定.漏斗法 |
(Metallic powders - Determination of apparent density - Funnel method) |
| BS EN 23923-2-1993 |
金屬粉末的表觀密度的測定.第2部分:斯科特(Scott)容積計法 |
(Metallic powders - Determination of apparent density - Scott volumeter method) |
| BS EN 2395-1994 |
AL-P2014A-T4或T42鋁合金.0.4-6mm薄板及帶材 |
(Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip 0,4 mm) |
| BS EN 2395-2005 |
航空航天系列.AL-P2014A-T4或T42鋁合金.0.4mm≤a≤6mm 薄板和帶材 |
|
| BS EN 23954-1993 |
粉末冶金用粉末的取樣 |
(Powders for powder metallurgical purposes - Sampling) |
| BS EN 23995-1993 |
金屬粉末規范.矩形壓坯橫向斷裂壓坯強度的測定 |
(Specification for metallic powders - Determination of green strength by transverse rupture of rectangular compacts) |
| BS EN 24003-1993 |
多孔性燒結金屬材料.氣泡試驗孔隙尺寸的測定 |
(Permeable sintered metal materials - Determination of bubble test pore size) |
| BS EN 24006-1991 |
封閉管首道中液體液量測量.詞匯和符號 |
(Measurement of fluid flow in closed conduits - Vocabulary and symbols) |
| BS EN 24015-1992 |
六角頭螺栓.B級產品.減縮桿(桿徑近似中徑) |
(Hexagon head bolts - Product grade B. Reduced shank (shank diameter pitch diameter)) |
| BS EN 241-2000 |
石油及其產品的試驗方法.液態石油產品.鈉含量的測定.原子吸收分光光度測定法 |
(Methods of test for petroleum and its products - Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method) |
| BS EN 2413-1995 |
鍍鎘合金鋼帶肩薄六角頭緊公差短螺紋螺栓.等級:1100MPa(室溫)/235℃ |
(Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 鳦) |
| BS EN 24178-1981 |
滿包運輸分發試驗中記錄信息規范 |
(Specification for information to be recorded in distribution trials involving complete, filled transport packages) |
| BS EN 24180-1-1981 |
滿包運輸性能試驗進度表編制指南.第1部分:一般原理 |
(Guide to compilation of performance test schedules for complete, filled transport packages - General principles) |
| BS EN 24180-2-1981 |
滿包運輸性能試驗進度表編制指南.第2部分:定量數據 |
(Guide to compilation of performance test schedules for complete, filled transport packages - Quantitative data) |
| BS EN 24185-1981 |
封閉管道中流體流量測量.稱重法 |
(Measurement of fluid flow in closed conduits - Weighing method) |
| BS EN 2422-2005 |
鋁合金AL-P2124-T351.板材.25 mm≤a≤120 mm |
|
| BS EN 2424-1995 |
對航空航天工業產品作標記 |
(Marking of aerospace products) |
| BS EN 24260-1994 |
石油及其產品的試驗方法.石油產品和烴類.硫含量的測定.粗油繩燃燒法 |
(Methods of test for petroleum and its products - Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method) |
| BS EN 2428-1995 |
乙丙橡膠(EPM/EPDM).硬度:50 IRHD |
(Ethylene-propylene rubber (EPM/EPDM) - Hardness 50 IRHD) |
| BS EN 2429-1995 |
乙丙橡膠(EPM/EPDM).硬度:60 IRHD |
(Ethylene-propylene rubber (EPM/EPDM) - Hardness 60 IRHD) |
| BS EN 2430-1995 |
乙丙橡膠(EPM/EPDM).硬度:70 IRHD |
(Ethylene-propylene rubber (EPM/EPDM) - Hardness 70 IRHD) |
| BS EN 2431-1995 |
乙丙橡膠(EPM/EPDM).硬度:80 IRHD |
(Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD) |
| BS EN 2432-1995 |
乙丙橡膠(EPM/EPDM).硬度:90 IRHD |
(Ethylene-propylene rubber (EPM/EPDM) - Hardness 90 IRHD) |
| BS EN 2437-2002 |
航空航天系列.鋁及鋁合金用鉻酸鹽轉化膜(黃色) |
(Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys) |
| BS EN 24489-1993 |
繞結硬質金屬的取樣和試驗 |
(Sintered hardmetals - Sampling and testing) |
| BS EN 24491-1-1993 |
金屬粉末.用還原法測定氧含量.第1部分:通則 |
(Metallic powders - Determination of oxygen content by reduction methods - General guidelines) |
| BS EN 24491-4-1993 |
金屬粉末.用還原法測定氧含量.第4部分:用還原萃取法測定氧的總含量 |
(Metallic powders - Determination of oxygen content by reduction methods - Total oxygen by reduction-extraction) |
| BS EN 24492-1993 |
不包括硬質金屬粉末的金屬粉末.壓實與繞結尺寸變化的測定 |
(Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering) |
| BS EN 24496-1993 |
金屬粉末.鐵、銅、錫和青銅粉末中酸不溶物含量的測定 |
(Metallic powders - Determination of acid insoluble content in iron, copper, tin and bronze powders) |
| BS EN 24497-1993 |
金屬粉末.用干篩法測定粒度 |
(Metallic powders - Determination of particle size by dry sieving) |
| BS EN 24498-1-1993 |
不包括硬質金屬的繞結金屬材料的表觀硬質度的測定.截面硬度本質均勻的材料 |
(Sintered metal materials, exluding hardmetals - Determination of apparent hardness - Materials of essentially uniform section hardness) |
| BS EN 24499-1993 |
硬質金屬規范.顯微組織的金相測定 |
(Specification for hardmetals - Metallographic determination of microstructure) |
| BS EN 24501-1994 |
硬質合金.鈦含量的測定.過氧化物光度法 |
(Hardmetals - Determination of titanium - Photometric peroxide method) |
| BS EN 24503-1993 |
硬質合金.用X射線熒光分析法對金屬素含量的測定.熔化法 |
(Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method) |
| BS EN 24505-1993 |
硬質金屬規范.空隙度和游離碳的金相測定 |
(Specification for hardmetals - Metallographic determination of porosity and uncombined carbon) |
| BS EN 24506-1993 |
硬質金屬規范.壓縮試驗 |
(Specification for hardmetals - Compression test) |
| BS EN 246-2003 |
衛生設備用水龍頭.流速調節器通用規范 |
(Sanitary tapware - General specifications for flow rate regulators) |
| BS EN 24641-1993 |
吸水和排水用橡膠軟管規范 |
(Rubber hoses for water suction and discharge - Specification) |
| BS EN 247-1997 |
熱交換器術語 |
(Heat exchangers - Terminology) |
| BS EN 24766-1992 |
一字槽平端緊定螺釘 |
(Slotted set screws with flat point) |
| BS EN 248-2003 |
衛生設備配件.鎳鉻電鍍層的一般規范 |
(Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr) |
| BS EN 2484-1989 |
把圖表攝成縮影膠片規范.35mm縮微膠片穿孔卡 |
(Specification for microfilming of drawings - Aperture card for 35 mm microfilm) |
| BS EN 24869-1-1991 |
聽力保護器的聲衰減.主觀測量法 |
(Acoustics - Hearing protectors - Sound attenuation of hearing protectors - Subjective method of measurement) |
| BS EN 24869-3-1994 |
聲學.聽力保護器.質量檢驗用耳罩型保護器測量插入損失的簡易方法 |
(Acoustics - Hearing protectors - Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes) |
| BS EN 24883-1993 |
硬質金屬規范.用X射線熒光分析法對金屬素含量的測定.溶液法 |
(Specification for hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Solution method) |
| BS EN 24884-1993 |
硬質金屬.利用燒結試塊的粉末取樣和試驗 |
(Hardmetals - Sampling and testing of powders using sintered test pieces) |
| BS EN 2489-1995 |
纖維增強塑料.試驗液體影響的測定 |
(Fibre reinforced plastics - Determination of the action of test fluids) |
| BS EN 2491-1997 |
二硫化鉬基上的干膜潤滑油.涂層法 |
(Molybdenum disulphide dry lubricants - Coating methods) |
| BS EN 24920-1982 |
紡織品.織物耐表面浸濕性的測定(噴霧試驗) |
(Textiles - Determination of resistance to surface wetting (spray test) of fabrics) |
| BS EN 24937-1991 |
鋼鐵.鉻含量的測定.電勢或目視滴定法 |
(Steel and iron - Determination of chromium content - Potentiometric or visual titration method) |
| BS EN 2495-1991 |
溫度補償?shù)�、額定電流不超過25A的單極電路斷路器規范.產品標準 |
(Specification for single-pole circuit breakers, temperature compensated, rated currents up to 25 A. Product standard) |
| BS EN 2497-1990 |
鈦與鈦合金干噴砂規范 |
(Specification for dry abrasive blasting of titanium and titanium alloys) |
| BS EN 2498-1990 |
具有自潤滑襯套和螺紋桿的可自動調心軸套的操縱桿規范.尺寸和規范 |
(Specification for rod ends, adjustable self-aligning plain bearing, with self-lubricating liner and threaded shank - Dimensions and loads) |
| BS EN 2499-1990 |
計算機輸出A6縮微平片規范 |
(Specification for computer output microfiche (com) A6 microfiche) |
| BS EN 250-2000 |
呼吸器.開路目備式壓縮空氣潛水裝置的安全要求、試驗、標志 |
(Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking) |
| BS EN 2501-1992 |
軸承.有自潤滑軸襯和寬內環的耐腐蝕鋼球形滑動軸承的尺寸和負荷 |
(Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring - Dimensions and loads) |
| BS EN 25077-1994 |
紡織品.洗滌干燥后尺寸變化的測定 |
(Textiles - Determination of dimensional change in washing and drying) |
| BS EN 251-2003 |
淋浴淺池.連接尺寸 |
(Shower trays - Connecting dimensions) |
| BS EN 2515-1990 |
一端為叉端、桿部有螺紋的可調整的操縱桿.尺寸和負荷 |
(Specification for rod ends, adjustable single fork and threaded shank - Dimensions and loads) |
| BS EN 2516-1997 |
耐蝕鋼鈍化和鎳基合金純化 |
(Passivation of corrosion resisting steels and decontamination of nickel base alloys) |
| BS EN 25163-1994 |
石油及其產品的試驗方法.發動機和飛機性燃料.汽油的抗爆特性的測定.馬達法 |
(Methods of test for petroleum and its products - Motor and aviation-type fuels - Determination of knock characteristics - Motor method) |
| BS EN 25164-1994 |
石油及其產品的試驗方法.發動機用的燃料.燃料的抗爆特性的測定.研究法 |
(Methods of test for petroleum and its products - Motor fuels - Determination of knock characteristics - Research method) |
| BS EN 25184-1995 |
直線電阻點焊電極 |
(Straight resistance spot welding electrodes) |
| BS EN 25264-3-1994 |
紙漿.實驗室打漿.第3部分:約克羅(JOKRO)碾磨法 |
(Pulps - Laboratory beating - Jokro mill method) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com