標準號 |
中文名稱 |
英文名稱 |
| BS EN 3475-501-2002 |
航空航天系列.飛行器用電纜.試驗方法.動態切口 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Dynamic cut-through) |
| BS EN 3475-502-2002 |
航空航天系列.飛行器用電纜.試驗方法.切口延伸 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Notch propagation) |
| BS EN 3475-503-2002 |
航空航天系列.飛行器用電纜.試驗方法.擦傷腐蝕 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Scrape abrasion) |
| BS EN 3475-504-2002 |
航空航天系列.飛行器用電纜.試驗方法.扭轉 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Torsion) |
| BS EN 3475-505-2002 |
航空航天系列.飛行器用電纜.試驗方法.導線和絞線抗拉試驗 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile tests on conductors and strands) |
| BS EN 3475-506-2002 |
航空航天系列.飛行器用電纜.試驗方法.電鍍連續性 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Plating continuity) |
| BS EN 3475-507-2002 |
航空航天系列.飛行器用電纜.試驗方法.電鍍粘結強度 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Adherence of plating) |
| BS EN 3475-508-2002 |
航空航天系列.飛行器用電纜.試驗方法.電鍍厚度 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Plating thickness) |
| BS EN 3475-509-2002 |
航空航天系列.飛行器用電纜.試驗方法.可焊度 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Solderability) |
| BS EN 3475-510-2002 |
航空航天系列.飛行器用電纜.試驗方法.擠壓絕緣護套和套管材料的抗拉強度和延伸率 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile strength and elongation of extruded insulation, sheath and jacket material) |
| BS EN 3475-511-2002 |
航空航天系列.飛行器用電纜.試驗方法.電纜對電纜的磨耗 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Cable-to-cable abrasion) |
| BS EN 3475-512-2002 |
航空航天系列.飛行器用電纜.試驗方法.耐彎度 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Flexure endurance) |
| BS EN 3475-603-2002 |
航空航天系列.飛行器用電纜.試驗方法.耐濕弧光性 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to wet arc tracking) |
| BS EN 3475-604-2002 |
航空航天系列.飛行器用電纜.試驗方法.耐干弧光的傳播 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to dry arc propagation) |
| BS EN 3475-605-2002 |
航空航天系列.飛行器用電纜.試驗方法.濕氣短路試驗 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Wet short circuit test) |
| BS EN 3475-701-2002 |
航空航天系列.飛行器用電纜.試驗方法.導體絕緣的脫層和粘結 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Strippability and adherence of insulation to the conductor) |
| BS EN 3475-702-2002 |
航空航天系列.飛行器用電纜.試驗方法.屏幕后推移能力 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Screen pushback capability) |
| BS EN 3475-703-2002 |
航空航天系列.飛行器用電纜.試驗方法.制造商標記的耐久性 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Permanence of manufacturer’s marking) |
| BS EN 3475-704-2002 |
航空航天系列.飛行器用電纜.試驗方法.撓性 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Flexibility) |
| BS EN 3475-705-2002 |
航空航天系列.飛行器用電纜.試驗方法.對照測量 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Contrast measurement) |
| BS EN 3475-801-2002 |
航空航天系列.飛行器用電纜.試驗方法.單位長度導體的電容量 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance per unit length) |
| BS EN 3475-802-2002 |
航空航天系列.飛行器用電纜.試驗方法.不平衡導體的電容量 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance unbalance) |
| BS EN 3475-803-2002 |
航空航天系列.飛行器用電纜.試驗方法.導體的電容量的變化 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance variation) |
| BS EN 3475-804-2002 |
航空航天系列.飛行器用電纜.試驗方法.傳播速度 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Velocity of propagation) |
| BS EN 3475-805-2002 |
航空航天系列.飛行器用電纜.試驗方法.特性阻抗 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Characteristic impedance) |
| BS EN 3475-806-2002 |
航空航天系列.飛行器用電纜.試驗方法.衰減性 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Attenuation) |
| BS EN 3475-807-2002 |
航空航天系列.飛行器用電纜.試驗方法.轉移阻抗 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Transfer impedance) |
| BS EN 3475-808-2002 |
航空航天系列.飛行器用電纜.試驗方法.交叉談話 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Cross-talk) |
| BS EN 348-1992 |
防護服.材料抗熔融金屬濺沫沖擊性能的測定 |
(Protective clothing - Determination of behaviour of materials on impact of small splashes of molten metal) |
| BS EN 349-1993 |
機械安全.避免擠壓人體各部分的最小間隙 |
(Safety of machinery - Minimum gaps to avoid crushing of parts of the human body) |
| BS EN 35-2000 |
從上面供水的立式坐浴盆.連接尺寸 |
(Pedestal bidets with over-rim supply - Connecting dimensions) |
| BS EN 350-1-1994 |
木材和木基制品的耐久性.實心木材的天然耐久性.木材天然耐久性的分類和試驗原則指南 |
(Durability of wood and wood-based products - Natural durability of solid wood - Guide to the principles of testing and classification of natural durability of wood) |
| BS EN 350-2-1994 |
木材和木基制品耐久性.實心木材的天然耐久性.歐洲精選重要木材種類的天然耐久性和可處理性 |
(Durability of wood and wood-based products - Natural durability of solid wood - Guide to natural durability and treatability of selected wood species of importance in Europe) |
| BS EN 3506-2001 |
航空航天系列.耐熱合金制成的熱軋薄板和板材.厚度2.0mm |
(Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm) |
| BS EN 351-1-1996 |
木材和木制品的耐用性.防腐劑處理過的木材.第1部分:防腐劑滲透和滯留的分類 |
(Durability of wood and wood-based products - Preservative-treated solid wood - Classification of preservative penetration and retention) |
| BS EN 351-2-1996 |
木材和木制品的耐用性.防腐劑處理過的木材.用防腐劑處理過的木材的分析取樣指南 |
(Durability of wood and wood-based products - Preservative-treated solid wood - Guidance on sampling for the analysis of preservative-treated wood) |
| BS EN 352-1-2002 |
護聽器.安全要求和試驗.耳套 |
(Hearing protectors - Safety requirements and testing - Ear-muffs) |
| BS EN 352-2-2002 |
護聽器.安全要求和試驗.耳塞 |
(Hearing protectors - Safety requirements and testing - Ear-plugs) |
| BS EN 352-3-2002 |
護聽器.安全要求和試驗.工業安全頭盔的耳套 |
(Hearing protectors - Safety requirements and testing - Ear-muffs attached to an industrial safety helmet) |
| BS EN 352-4-2001 |
聽力保護器.安全要求和試驗.依據聲強的耳套 |
(Hearing protectors - Safety requirements and testing - Level-dependent ear-muffs) |
| BS EN 352-5-2002 |
聽力保護器.安全要求和試驗.有源噪聲降低型耳機橡皮套 |
(Hearing protectors - Safety requirements and testing - Active noise reduction ear-muffs) |
| BS EN 352-6-2002 |
聽力保護器.安全要求和試驗.帶音頻輸入的耳機橡皮套 |
(Hearing protectors - Safety requirements and testing - Ear-muffs with electrical audio input) |
| BS EN 352-7-2002 |
聽力保護器.安全要求和試驗.電平相關耳塞 |
(Hearing protectors - Safety requirements and testing - Level-dependent ear-plugs) |
| BS EN 353-1-2002 |
預防高空墜落的個人用保護設備.定向型墜落阻止裝置包括剛性錨固線上的定向型墜落阻止裝置指南 |
(Personal protective equipment against falls from a height - Guided type fall arresters including a rigid anchor line) |
| BS EN 353-2-2002 |
預防高空墜落的個人用保護設備.定向型墜落阻止裝置包括軟錨固線上的定向型墜落阻止裝置 |
(Personal protective equipment against falls from a height - Guided type fall arresters including a flexible anchor line) |
| BS EN 354-2002 |
防高空人員墜落保護設備.短繩 |
(Personal protective equipment against falls from a height - Lanyards) |
| BS EN 3541-1992 |
帶螺柄的端桿、可調、自對準球軸承.尺寸、扭矩、間隙和載荷 |
(Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearances and loads) |
| BS EN 3542-1998 |
耐熱鎳基合金NI-PH2801(鉻鎳鐵合金X750)螺旋形線圈自鎖式螺紋嵌鑲件 |
(Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750)) |
| BS EN 3543-1997 |
鈍化耐熱及耐腐蝕鋼制短螺紋緊公差標準柄翼型十字槽100°標準埋頭螺釘.等級:1100 MPa(室溫)/425℃ |
(Screws, 100 ?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient tem) |
| BS EN 355-2002 |
預防高空墜落的人員保護設備.能量吸收器 |
(Personal protective equipment against falls from a height - Energy absorbers) |
| BS EN 3553-2005 |
航空航天系列.鋁合金AL-P2618A-T6511.擠制棒材和型材.a或D160mm |
|
| BS EN 356-2000 |
建筑物中的玻璃.安全玻璃.抗人力沖擊的試驗和分類 |
(Glass in building - Security glazing - Testing and classification of resistance against manual attack) |
| BS EN 3561-2001 |
航空航天系列.鈦合金管連接件8°30’.在管端焊接和軋制的帶動梁密封端頭的箍 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end) |
| BS EN 3566-2001 |
航空航天系列.鈦合金管連接件8°30’.帶鎖緊環的接頭 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Adaptor with lockring) |
| BS EN 3567-001-2001 |
航空航天系列.符合MIL-STD-1553B的多路數據總線系統中使用的串聯耦合器 |
(Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Technical specification) |
| BS EN 3567-003-2001 |
航空航天系列.符合MIL-STD-1553B的多路數據總線系統中使用的串聯耦合器.單個的串聯耦合器.產品標準 |
(Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Single in-line couplers - Product standard) |
| BS EN 3567-004-2001 |
航空航天系列.符合MIL-STD-1553B的多路數據總線系統中使用的串聯耦合器.復式串聯耦合器.產品標準 |
(Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Double in-line couplers - Product standard) |
| BS EN 357-2000 |
建筑物中的玻璃.透明或半透明玻璃制品制防火玻璃件.防火性能的分類 |
(Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance) |
| BS EN 357-2004 |
建筑物中的玻璃.包括透明或半透明玻璃制品的防火玻璃件.防火性能的分類 |
|
| BS EN 358-2000 |
工作定位和防高空墜落的個人防護設備.工作定位和約束用帶及工作定位用牽索 |
(Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards) |
| BS EN 36-1999 |
沿緣供水墻掛式座浴盆.連接尺寸 |
(Wall-hung bidets with over-rim supply - Connecting dimensions) |
| BS EN 360-2002 |
預防高空墜落的人員保護設備.收縮型墜落阻止裝置 |
(Personal protective equipment against falls from a height - Retractable type fall arresters) |
| BS EN 361-2002 |
預防高空墜落的人員保護設備.全身保護成套裝置 |
(Personal protective equipment against falls from a height - Full body harnesses) |
| BS EN 3611-1995 |
套筒.尺寸和配合選擇.設計標準 |
(Spigots - Dimensions and fit selection - Design standard) |
| BS EN 3612-1997 |
花鍵用底部切槽.設計標準 |
(Undercuts for splines - Design standard) |
| BS EN 362-1993 |
預防高空墜落的個人用保護設備.連接器 |
(Personal protective equipment against falls from a height - Connectors) |
| BS EN 363-2002 |
預防高空墜落的人員用保護設備.墜落阻止裝置 |
(Personal protective equipment against falls from a height - Fall arrest systems) |
| BS EN 364-1993 |
預防高空墜落的個人用保護設備.試驗方法 |
(Personal protective equipment against falls from a height - Test methods) |
| BS EN 3642-1997 |
陽極氧化TI-PO2鈦制100°標準埋頭圓頂實心鉚釘.英制系列 |
(Rivets, solid, 100 ?countersunk normal head, with dome, in titanium TI-PO2, anodized, inch based series) |
| BS EN 3643-1997 |
陽極氧化TI-PO2鈦制100°標準埋頭實心鉚釘.英制系列 |
(Rivets, solid, 100 ?countersunk normal head, in titanium TI-PO2, anodized, inch based series) |
| BS EN 3644-1997 |
萬向頭,陽極氧化,英寸基準系列,TI-PO2鈦制實心鉚釘 |
(Rivets, solid, universal head, in titanium TI-PO2, anodized, inch based series) |
| BS EN 365-1993 |
預防高空墜落的個人用保護設備.使用和標記說明的一般要求 |
(Personal protective equipment against falls from a height - General requirements for instructions for use and for marking) |
| BS EN 365-2004 |
預防高空墜落的個人保護設備.使用、維護、周期檢驗、修理、標記和包裝說明的一般要求 |
|
| BS EN 3663-2001 |
航空航天系列.管連接件.丁腈橡膠制成的O形環.75IRHD.溫度范圍:-55℃到+135℃ |
(Aerospace Series - Pipe coupling - O-rings in rubber NBR, 75 IRHD, temperature range: -55 鳦 to + 135 鳦) |
| BS EN 3665-1997 |
清漆和涂料的檢驗方法.鋁合金耐線狀腐蝕的檢驗 |
(Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys) |
| BS EN 367-1992 |
防護服.耐熱和耐火防護.火焰旁熱傳遞的測定方法 |
(Protective clothing - Protection against heat and fire - Method for determining heat transmission on exposure to flame) |
| BS EN 3676-1998 |
薄壁、自鎖緊嵌鑲件.設計標準 |
(Inserts, thin wall, self-locking - Design standard) |
| BS EN 368-1993 |
防護服.耐液體化工產品防護.試驗方法:材料耐液體穿透性能 |
(Protective clothing - Protection against liquid chemicals - Test method: resistance of materials to penetration by liquids) |
| BS EN 3688-2001 |
航空航天系列.焊接管用鈦合金制成的T環形填充物.14000kPa標稱壓力 |
(Aerospace series - T-ring fillers in titanium alloy for welded pipes - 14000 kPa nominal pressure) |
| BS EN 3689-2001 |
航空航天系列.焊接管用鈦合金制成的T環形填充物.28000kPa標稱壓力 |
(Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure) |
| BS EN 3690-2001 |
航空航天系列.鈦合金管聯接器8°30’.長悶頭活接頭 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Unions, bulkhead, long) |
| BS EN 3691-2001 |
航空航天系列.鈦合金8°30’管連接件.活接頭、悶頭、長焊接 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Unions, bulkhead, long welded) |
| BS EN 3696-2001 |
航空航天系列.耐熱鋼制成的墊圈 |
(Aerospace series - Washers in heat resisting steel) |
| BS EN 37-1999 |
獨立供水抽水馬桶.連接尺寸 |
(Pedestal W.C. pans with independent water supply - Connecting dimensions) |
| BS EN 370-1993 |
木材防腐劑.防止家具產生竊蠹的根除效果的測定 |
(Wood preservatives - Determination of eradicant efficacy in preventing emergence of Anobium punctatum (De Geer)) |
| BS EN 371-1992 |
呼吸器官保護設備用預防低沸點有機化合物的AX氣體過濾器和綜合過濾器規范 |
(Specification for AX gas filters and combined filters against low boiling organic compounds used in respiratory protection equipment) |
| BS EN 372-1992 |
呼吸器官保護設備用預防特定種名化合物的SX氣體過濾器和綜合過濾器規范 |
(Specification for SX gas filters and combined filters against specific named compounds used in respiratory protective equipment) |
| BS EN 3720-1995 |
MoS2涂覆的耐熱鋼FE-PA92HT(A286)制自鎖雙六角頭螺母.等級:1100 MPa(室溫)/425℃ |
(Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoSDOWN2 coated - Classification: 1100 MPa (at ambient temperature)/425℃) |
| BS EN 3721-1995 |
MoS2涂覆的FE-PA92HT(A286)耐熱鋼制帶深鏜孔自鎖雙六角頭螺母.等級:1100 MPa(室溫)/425℃ |
(Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel, FE-PA92HT (A 286), MoSDOWN2 coated - Classification: 1100 MPa (at ambient temperature)/425℃) |
| BS EN 3722-1995 |
MoS2涂覆的FE-PA92HT(A286)耐熱鋼制自鎖柄螺母.等級:1100 MPa(室溫)/425℃ |
(Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), MoSDOWN2 coated - Classification: 1100 MPa (at ambient temperature)/425℃) |
| BS EN 3723-1996 |
二硫化鉬涂覆的耐熱鋼FE-PA92HT(A286)制自鎖六角頭螺母.等級:1100 MPa(室溫)/425℃ |
(Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoSDOWN2 coated - Classification: 1100 MPa (at ambient temperature)/425℃) |
| BS EN 3724-2003 |
航空航天系列.細桿長螺紋雙六角頭鍍MoS2的鈦合金TI-P64001螺栓.等級:1100MPa(室溫) |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001 MoSDOWN2 coated - Classification: 1 100 MPa (at ambient temperature)) |
| BS EN 3724-2004 |
細桿長螺紋雙六角頭鍍MoS2的鈦合金TI-P64001螺栓.強度等級:1100MPa(室溫) |
|
| BS EN 3725-2003 |
航空航天系統.MoS2涂覆的鈦合金TI-P64001制長螺紋、標準桿、六瓣凹槽盤頭螺栓 |
(Aerospace series - Bolts, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, MoSDOWN2 coated - Classification: 1100 MPa (at ambient temperature)) |
| BS EN 3725-2005 |
航空航天系列.陽極氧化、MoS2涂覆的鈦合金TI-P64001制長螺紋、標準桿、六瓣凹槽盤頭螺釘.強度等級:1100MPa(室溫) |
|
| BS EN 3725-2005 |
航空航天系列.陽極氧化、MoS2涂覆的鈦合金TI-P64001制長螺紋、標準桿、六瓣凹槽盤頭螺釘.強度等級:1100MPa(室溫) |
|
| BS EN 3726-2003 |
航空航天系列.耐熱鋼FE-PA92HT (A286), MoS2鍍涂的自鎖夾緊螺母.分類: 1 100 MPa(室溫)/425℃ |
(Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/425℃) |
| BS EN 3726-2005 |
航空航天系列.耐熱鋼FE-PA2601 (A286)制MoS2涂覆的自鎖夾緊螺母.等級: 1100 MPa(室溫)/425 鳦 |
|
| BS EN 373-1993 |
防護服.耐熔融金屬飛濺材料的評定 |
(Protective clothing - Assessment of resistance of materials to molten metal splash) |
| BS EN 3730-2001 |
航空航天系列.夾件.鞍座.帶橡膠彈性墊料的鋁合金固定式滑動型.尺寸.質量 |
(Aerospace series - Clamps, saddle - Fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions - Masses) |
| BS EN 374-1-2003 |
耐化學腐蝕和微生物的防護手套.術語和性能要求 |
(Protective gloves against chemicals and micro-organisms - Terminology and performance requirements) |
| BS EN 374-2-2003 |
耐化學腐蝕和微生物的防護手套.第2部分:耐滲透性的測定 |
(Protective gloves against chemicals and micro-organisms - Determination of resistance to penetration) |
| BS EN 374-3-2003 |
耐化學腐蝕和微生物的防護手套.第3部分:耐化學藥品滲透性的測定 |
(Protective gloves against chemicals and micro-organisms - Determination of resistance to permeation by chemicals) |
| BS EN 3740-1997 |
MoS2潤滑的陽極氧化鈦合金制短螺紋緊公差柄細六角頭帶肩螺栓.等級:1100 MPa(室溫)/315℃ |
(Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoSDOWN2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 鳦) |
| BS EN 3741-2003 |
航空航天系列.米制夾緊螺母.安裝孔和部件 |
(Aerospace series - Nuts, clip, metric - Installation holes and assembly) |
| BS EN 3745-201-2002 |
航空航天系列.飛行器用光纖和電纜.試驗方法.外觀檢查 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Visual examination) |
| BS EN 3745-205-2002 |
航空航天系列.飛行器用光纖和電纜.試驗方法.電纜縱向尺寸的穩定性 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable longitudinal dimensional stability) |
| BS EN 3745-301-2002 |
航空航天系列.飛行器用光纖和電纜.試驗方法.衰減性 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Attenuation) |
| BS EN 3745-302-2002 |
航空航天系列.飛行器用光纖和電纜.試驗方法.數字孔徑 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Numerical aperture) |
| BS EN 3745-305-2002 |
航空航天系列.飛行器用光纖和電纜.試驗方法.周圍光耦合的消除 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Immunity to ambient light coupling) |
| BS EN 3745-504-2002 |
航空航天系列.飛行器用光纖和電纜.試驗方法.微彎曲試驗 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Micro bending test) |
| BS EN 3745-507-2002 |
航空航天系列.飛行器用光纖和電纜.試驗方法.切割強度 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cut-through) |
| BS EN 3745-508-2002 |
航空航天系列.飛行器用光纖和電纜.試驗方法.扭轉力 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Torsion) |
| BS EN 3745-509-2002 |
航空航天系列.飛行器用光纖和電纜.試驗方法.紐結試驗 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Kink test) |
| BS EN 3745-510-2002 |
航空航天系列.飛行器用光纖和電纜.試驗方法.彎曲試驗 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Bending test) |
| BS EN 3745-511-2002 |
航空航天系列.飛行器用光纖和電纜.試驗方法.電纜間的磨蝕 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable to cable abrasion) |
| BS EN 3745-701-2002 |
航空航天系列.飛行器用光纖和電纜.試驗方法.可剝離性 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Strippability) |
| BS EN 3746-2003 |
航空航天系列.氟硅酮橡膠(FVMQ)O型密封圈.硬度為80IRHD |
(Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD) |
| BS EN 3747-2003 |
航空航天系列.氟硅酮橡膠(FVMQ)O型密封圈.技術規范 |
(Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification) |
| BS EN 3748-2001 |
航空航天系列.O形環槽.尺寸 |
(Aerospace series - O-ring grooves - Dimensions) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com