標準號 |
中文名稱 |
英文名稱 |
| EN 60947-7-2-2002 |
低壓開關設備和控制設備第7-2部分：輔助設備銅導線用防護導線接線端子排 |
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment; Protective conductor terminal blocks for copper conductors (IEC 60947-7-2:2002) / Note: Endorsement notice |
| EN 60947-7-3-2002 |
低壓開關裝置和控制裝置第7-3部分：輔助設備引線接線板的安全要求 |
Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment; Safety requirements for fuse terminal blocks (IEC 60947-7-3:2002) / Note: Endorsement notice |
| EN 60947-8-2003 |
低壓開關裝置和控制裝置第8部分：旋轉電機嵌入式熱保護（PTC）控制裝置 |
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines (IEC 60947-8:2003) / Note: Endorsement notice |
| EN 60948-1990 |
家電系統數字鍵盤 |
Numeric keyboard for home electronic systems (HES) (IEC 60948:1988) |
| EN 60950-1-2001 |
信息技術設備的安全第１部分：一般要求 |
Information technology equipment - Safety - Part 1: General requirements (IEC 60950-1:2001, modified) / Note: Endorsement notice |
| EN 60950-21-2003 |
信息技術設備安全第21部分：遠程動力輸送 |
Information technology equipment - Safety - Part 21: Remote power feeding (IEC 60950-21:2002) / Note: Endorsement notice |
| EN 60952-1-1993 |
飛機用蓄電池組第1部分：一般試驗要求和性能等級 |
Aircraft batteries - Part 1: General test requirements and performance levels (IEC 60952-1:1988) |
| EN 60952-1-2004 |
飛機用蓄電池組.第1部分:一般試驗要求和性能水平 |
|
| EN 60952-2-1993 |
飛機用蓄電池組第2部分：設計和制造要求 |
Aircraft batteries - Part 2: Design and construction requirements (IEC 60952-2:1991) |
| EN 60952-2-2004 |
飛機用蓄電池組.第2部分:設計和制造要求 |
|
| EN 60952-3-1995 |
飛機用蓄電池組第３部分：外部電連接器 |
Aircraft batteries - Part 3: External electrical connectors (IEC 60952-3:1993) |
| EN 60952-3-2004 |
飛機用蓄電池組.第3部分:產品規范及設計與性能的聲明(DDP) |
|
| EN 60953-1-1995 |
汽輪機熱力驗收試驗規范第１部分：方法Ａ適用于大容量凝汽式汽輪機的高精度規范 |
Rules for steam turbine thermal acceptance tests - Part 1: Method A - High accuracy for large condensing steam turbines (IEC 60953-1:1990) |
| EN 60953-2-1995 |
汽輪機熱力驗收試驗規范第２部分：方法Ｂ適用于各種類型和容量汽輪機的較寬精度和規范 |
Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines (IEC 60953-2:1990) |
| EN 60953-3-2002 |
汽輪機熱力驗收試驗規范第３部分： |
Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines (IEC 60953-3:2001) |
| EN 60958-1-2000 |
數字音頻接口第１部分：總則 |
Digital audio interface - Part 1: General (IEC 60958-1:1999) |
| EN 60958-3-2003 |
數字音頻接口第３部分：消費類用途 |
Digital audio interface - Part 3: Consumer applications (IEC 60958-3:2003) / Note: Endorsement notice |
| EN 60958-4-2000 |
數字音頻接口第４部分：專業類用途 |
Digital audio interface - Part 4: Professional applications (IEC 60958-4:1999) |
| EN 60961-1994 |
使用寬12.65mm(0.5in)L型磁帶的螺旋掃描盒式磁帶錄像系統 |
Helican-scan video-tape cassette system using 12,65 mm (0,5 in) magnetic tape on type L (IEC 60961:1993) |
| EN 60966-1-1999 |
射頻與同軸電纜組件第1部分：總規范一般要求和試驗方法 |
Radio frequency and coaxial cables assemblies - Part 1: Generic specification - General requirements and test methods (IEC 60966-1:1999) |
| EN 60966-2-2-1994 |
射頻和同軸電纜組件第2－2部分：柔軟性同軸電纜組件空白詳細規范 |
Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies (IEC 60966-2-2:1992) |
| EN 60966-2-3-1999 |
射頻和同軸電纜部件第2-3部分：柔軟同軸電纜部件的詳細規范 |
Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies (IEC 60966-2-3:1996) |
| EN 60966-2-4-2003 |
射頻與同軸電纜組件第2-4部分：無線電和電視接收機用電纜部件詳細規范（頻率范圍0至3000MHz的IEC60169-2 |
Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-2 connectors (IEC 60966-2-4:2003) / Note: Endorsement notice |
| EN 60966-2-5-2003 |
射頻和同軸電纜組件第2-5部分：無線電和電視接收機用電纜組件的詳細規格頻率范圍在0至1000 MHz |
Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 1000 MHz, IEC 60169-2 connectors (IEC 60966-2-5:2003) / Note: Endorsement notice |
| EN 60966-2-6-2003 |
射頻和同軸電纜組件第2-6部分：電視和無線電接收機用電纜組件的詳細規格頻率范圍在0至3000 MHz,IEC 601 |
Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-24 connectors (IEC 60966-2-6:2003) / Note: Endorsement notice |
| EN 60966-3-1-1994 |
射頻和同軸電纜組件第3－1部分：半柔軟同軸電纜組件空白詳細規范 |
Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies (IEC 60966-3-1:1992) |
| EN 60966-3-1994 |
射頻和同軸電纜組件第3部分：半柔軟同軸電纜組件分規范 |
Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies (IEC 60966-3:1992) |
| EN 60966-3-2-1999 |
射頻和同軸電纜部件第3-1部分：.GSM(0.8GHz-1GHz)用半柔軟同軸電纜部件的詳細規范 |
Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) (IEC 60966-3-2:1996) |
| EN 60966-4-1-1994 |
射頻和同軸電纜部件第4-1部分：半硬性同軸電纜組件空白詳細規范 |
Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies (IEC 60966-4-1:1994) |
| EN 60966-4-1994 |
射頻和同軸電纜部件第4部分：半硬性同軸電纜組件分規范 |
Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies (IEC 60966-4:1992) |
| EN 60974-10-2003 |
弧焊設備第10部分：電磁兼容(EMC)要求 |
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements (IEC 60974-10:2002, modified) / Note: Endorsement notice |
| EN 60974-11-1995 |
電弧焊設備第11部分：焊條鉗 |
Arc-welding equipment - Part 11: Electrode holders (IEC 60974-11:1992, modified) |
| EN 60974-12-1995 |
弧焊設備第12部分：焊接電纜的連接器 |
Arcwelding equipment - Part 12: Coupling devices for welding cables (IEC 60974-12:1992, modified) |
| EN 60974-2-2003 |
電弧焊設備第2部分：液體冷卻系統 |
Arc welding equipment - Part 2: Liquid cooling systems (IEC 60974-2:2002) / Note: Endorsement notice |
| EN 60974-5-2002 |
電弧焊設備第５部分：送線器 |
Arc-welding equipment - Part 5: Wire feeders (IEC 60974-5:2002) |
| EN 60974-6-2003 |
弧焊設備第6部分：有限工作內容的手動金屬弧焊電源 |
Arc welding equipment - Part 6: Limited duty manual metal arc welding power sources (IEC 60974-6:2003) / Note: Endorsement notice |
| EN 60974-7-2000 |
電弧焊設備第７部分：焊燈（槍） |
Arc welding equipment - Part 7: Torches (IEC 60974-7:2000) |
| EN 60974-8-2004 |
電弧焊設備.第8部分:焊接和等離子切割設備用氣體控制臺 |
|
| EN 60983-1996 |
小型燈 |
Miniature lamps (IEC 60983:1995) |
| EN 60984-1992 |
帶電作業用絕緣袖套 |
Sleeves of insulating material for live working (IEC 60984:1990, modified) |
| EN 60990-1999 |
接觸電流和保護導體電流的測量方法 |
Methods of measurement of touch current and protective conductor current (IEC 60990:1999) |
| EN 60993-2002 |
有開口的鎘鎳電池用電解液 |
Electrolyte for vented nickel-cadmium cells (IEC 60993:1989) / Note: Endorsement notice |
| EN 60994-1992 |
水力機械(水輪機、蓄水泵和水輪泵)振動和脈動的現場測量指南 |
Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) (IEC 60994:1991) |
| EN 60998-1-1993 |
家用和類似用途低壓電路連接設備第2-1部分：一般要求 |
Connecting devices for low voltage circuits for household and similar purposes - part 1: General requirements (IEC 60998-1:1990, modified) |
| EN 60998-2-1-1993 |
家用和類似用途低壓電路連接設備第2－1部分：帶螺旋式夾緊裝置的獨立機構連接裝置的特殊要求 |
Connecting devices for low voltage circuits for household and similar purposes; part 2-1: particular requirements for connecting devices as separate entities with screw-type clamping units (IEC 60998-2-1:1990, modified) |
| EN 60998-2-2-1993 |
家用和類似用途低壓電路連接器件第2-2部分：作為帶有無螺絲型的夾緊器件的獨立單的連接器件的特別要求 |
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units (IEC 60998-2-2:1991) |
| EN 60998-2-3-1993 |
家用和類似用途低壓電路連接器件第2-3部分：作為帶有絕緣穿孔夾緊器件的獨立單的連接器件 |
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulating piercing clamping units (IEC 60998-2-3:1991) |
| EN 60998-2-4-1993 |
家用和類似用途低壓電路連接器件第2-4部分：扭絞式連接器件的特殊要求 |
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices (IEC 60998-2-4:1993) |
| EN 60999-1-2000 |
連接器件銅導線有螺紋式和無螺紋式夾緊裝置的安全要求第1部分：從0.2－35mm2(包括35mm2)導線用的夾緊 |
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 |
| EN 610-1995 |
錫和錫合金 錫錠 |
Tin and tin alloys - Ingot tin |
| EN 61000-2-10-1999 |
電磁兼容性(EMC)第2-10部分：環境 HEMP環境描述傳導騷擾 |
Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance (IEC 61000-2-10:1998) |
| EN 61000-2-12-2003 |
電磁兼容(EMC)第-12部分：環境公共中壓供電系統中的低壓干擾和信號的兼容等級 |
Electromagnetic compatibility (EMC) - Part 2-12: Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems (IEC 61000-2-12:2003) / Note: Endorsement notice |
| EN 61000-2-2-2002 |
電磁兼容性（ＥＭＣ）第2-2部分：環境在共用低壓供電系統中低頻傳導騷擾和信號傳輸?shù)募嫒菪运?/td>
| Electromagnetic compatibility (EMC) - Part 2-2: Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (IEC 61000-2-2:2002) / Note: Endorsement notice |
| EN 61000-2-4-2002 |
電磁兼容性(MEC)第2-4部分：環境工廠中低頻傳導騷擾的兼容性水平 |
Electromagnetic compatibility (EMC) - Part 2-4: Environment; Compatibility levels in industrial plants for low-frequency conducted disturbances (IEC 61000-2-4:2002) / Note: Endorsement notice |
| EN 61000-2-9-1996 |
電磁兼容性(EMC）第2部分：環境第9節：HEMP環境描述輻射騷擾基礎EMC出版物 |
Elektromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance - Basic EMC publication (IEC 61000-2-9:1996) |
| EN 61000-3-11-2000 |
電磁兼容性第3-11部分：限值共用低壓供電系統中電壓變化、電壓波動和閃爍的限值額定電流為７５Ａ并需 |
Electromagnetic compatibility (EMC) - Part 3-11: Limits; Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems; Equipment with rated current ≤75 A and subject to conditional connection (IEC 61000- |
| EN 61000-3-2-2000 |
電磁兼容性（ＥＭＣ）第3-2部分：額定值輻射諧波電流的額定值(設備輸入電流為16A/相位) |
Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) (IEC 61000-3-2:2000, modified) |
| EN 61000-3-2/prA1-2001 |
標準號： |
中文標題： |
| EN 61000-3-2/prA2-2003 |
EN 61000-3-2/prA2-2003 |
|
| EN 61000-3-3/prA11-1995 |
EN 61000-3-3/prA11-1995 |
|
| EN 61000-4-1-2000 |
電磁兼容性(MEC)第4-1部分：試驗和測量技術IEC61000-4系列綜述 |
Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques; Overview of IEC 61000-4 series (IEC 61000-4-1:2000) |
| EN 61000-4-10/prAA-2000 |
電磁兼容性（ＥＭＣ）第4部分：試驗和測量方法第10節：阻尼振蕩磁場抗擾度試驗基礎(EMC)出版物修改 |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
| EN 61000-4-10/prAB-2000 |
電磁兼容性（ＥＭＣ）第4部分：試驗和測量方法第10節：阻尼振蕩磁場抗擾度試驗基礎(EMC)出版物修改 |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
| EN 61000-4-11-2004 |
電磁兼容性.第4-11部分:試驗和測量技術.電壓暫降、短時中斷和電壓變化抗擾度試驗 |
|
| EN 61000-4-11/prAA-2000 |
電磁兼容性（ＥＭＣ）第4部分：試驗和測量方法第11節：電壓暫降、短時中斷及電壓變化抗擾性試驗 修改Ａ |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
| EN 61000-4-11/prAB-2000 |
電磁兼容性（ＥＭＣ）第4部分：試驗和測量方法第11節：電壓暫降、短時中斷及電壓變化抗擾性試驗 修改草 |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
| EN 61000-4-12/prAA-2000 |
電磁兼容性（ＥＭＣ）第4部分：試驗和測量方法第12節：振蕩波抗擾性試驗基礎ＥＭＣ出版物 修改ＡＡ |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
| EN 61000-4-12/prAB-2000 |
電磁兼容性（ＥＭＣ）第4部分：試驗和測量方法第12節：振蕩波抗擾性試驗基礎ＥＭＣ出版物 修改ＡＢ |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
| EN 61000-4-13-2002 |
電磁兼容性（ＥＭＣ）第4部分：試驗和測量方法第13節：試驗和測量方法 在交流電輸入端口低頻抗干擾試驗 |
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques; Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests (IEC 61000-4-13:2002) / Note: Endorsement notice |
| EN 61000-4-14-1999 |
電磁兼容性(EMC)第4-14部分：試驗和測量技術電壓波動抗擾度試驗 |
Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test (IEC 61000-4-14:1999) |
| EN 61000-4-16-1998 |
電磁兼容性(EMC)第4-16部分：試驗和測量技術對頻率在0-150kHz范圍內的傳導共模騷擾的抗擾試驗 |
Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:1998) |
| EN 61000-4-17-1999 |
電磁兼容性(EMC)第4-17部分：試驗和測量技術直流輸入電力端口上的紋抗擾度試驗 |
Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test (IEC 61000-4-17:1999) |
| EN 61000-4-2/prA3-1999 |
電磁兼容性(MEC)第４部分：試驗和測量技術第２節：靜電放電抗擾度試驗基礎EMC出版物修改草案３ |
Amendment to IEC 61000-4-2 |
| EN 61000-4-2/prAA-2000 |
電磁兼容性(MEC)第４部分：試驗和測量技術第２節：靜電放電抗擾度試驗基礎EMC出版物修改草案ＡＡ |
Amendment to IEC 61000-4-2: A test set-up for portable and/or double insulated table top equipment |
| EN 61000-4-20-2003 |
電磁兼容(EMC)第4-20部分：試驗和測量技術橫向電磁(TEM)波導的發射和抗擾試驗 |
Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques; Emission and immunity testing in transverse electromagnetic (TEM) waveguides (IEC 61000-4-20:2003) / Note: Endorsement notice |
| EN 61000-4-23-2000 |
電磁兼容性(EMC)第4-23部分：試驗和測量技術ＨＥＭＰ和其他輻射騷擾的保護裝置試驗 |
Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques; Test methods for protective devices for HEMP and other radiated disturbances (IEC 61000-4-23:2000) |
| EN 61000-4-24-1997 |
電磁兼容性（ＥＭＣ）第4部分：試驗和測量技術第24節：HEMP傳導騷擾的保護裝置試驗方法基礎(EMC)出版物 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 24: Test methods for protective devices for HEMP conducted disturbance - Basic EMC publication (IEC 61000-4-24:1997) |
| EN 61000-4-25-2002 |
電磁兼容性（ＥＭＣ）第4-25部分：試驗和測量技術設備和系統的HEMP抗干擾試驗方法 |
Electromagnetic compatibility (EMC) - Part 4-25: Testing and measuring techniques - HEMP immunity test methods for equipment and systems (IEC 61000-4-25:2001) |
| EN 61000-4-27-2000 |
電磁兼容性（ＥＭＣ）第4-27部分：試驗和測量技術不平衡抗擾度試驗 |
Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques; Unbalance, immunity test (IEC 61000-4-27:2000) |
| EN 61000-4-28-2000 |
電磁兼容性（ＥＭＣ）第4-28部分：試驗和測量技術電力頻率變化抗擾度試驗 |
Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test (IEC 61000-4-28:1999) |
| EN 61000-4-29-2000 |
電磁兼容性（ＥＭＣ）第4-29部分：試驗和測量技術直流輸入電力端口上的電壓暫降、斷時中斷和電壓變化抗擾 |
Electromagnetic Compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests (IEC 61000-4-29:2000) |
| EN 61000-4-30-2003 |
電磁兼容（EMC）第4-30部分：試驗和測量技術動力質量測量方法 |
Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques; Power quality measurement methods (IEC 61000-4-30:2003) / Note: Endorsement notice |
| EN 61000-4-4-2004 |
電磁兼容性(EMC).第4-4部分:試驗和測量技術.電快速瞬變/猝發抗擾度試驗 |
|
| EN 61000-4-4/prAA-2000 |
電磁兼容性(EMC)第4部分：試驗和測量技術第4節：電快速瞬變/猝發抗擾試驗基本EMC出版物 修改ＡＡ |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
| EN 61000-4-4/prAB-2000 |
電磁兼容性(EMC)第4部分：試驗和測量技術第4節：電快速瞬變/猝發抗擾試驗基本EMC出版物 修改ＡＢ |
Amendment to IEC 61000-4-4 (1995) |
| EN 61000-4-5/prAA-2000 |
電磁兼容性(MEC）第４部分：試驗和測量技術第５節：浪涌抗擾度試驗修改草案ＡＡ |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
| EN 61000-4-5/prAB-2000 |
電磁兼容性(MEC）第４部分：試驗和測量技術第５節：浪涌抗擾度試驗修改草案ＡＢ |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
| EN 61000-4-7-2002 |
電磁兼容性(MEC)第4部分：試驗和測量技術第7節：供電系統和與其連接的設備的諧波和諧波間的測量及測量 |
Electromagnetic compatibility (EMC) - Part 4: testing and measurement techniques; section 7: general guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (IEC 61000-4-7:1991) / N |
| EN 61000-4-8/prAA-2000 |
電磁兼容性（ＥＭＣ）第4部分：:試驗和測量方法第8節：工頻磁場抗擾度試驗基礎(EMC)出版物 修改ＡＡ |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
| EN 61000-4-8/prAB-2000 |
電磁兼容性（ＥＭＣ）第4部分：:試驗和測量方法第8節：工頻磁場抗擾度試驗基礎(EMC)出版物 修改ＡＢ |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
| EN 61000-4-9/prAA-2000 |
電磁兼容性（ＥＭＣ）第4部分：試驗和測量方法第9節：脈沖磁場抗擾試驗基礎(EMC)出版物修改ＡＡ |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
| EN 61000-4-9/prAB-2000 |
電磁兼容性（ＥＭＣ）第4部分：試驗和測量方法第9節：脈沖磁場抗擾試驗基礎(EMC)出版物修改ＡＢ |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
| EN 61000-5-5-1996 |
電磁兼容性（ＥＭＣ）第5部分：安裝和調試指南第5節：HEMP射導騷擾保護裝置規范 基礎(EMC)出版物 |
Elektromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5: Specification of protective devices for HEMP conducted disturbance - Basic EMC publication (IEC 61000-5-5:1996) |
| EN 61000-5-7-2001 |
電磁兼容性（ＥＭＣ）第5-7部分：安裝和調試指南外殼對電磁騷擾的保護度（EM規程） |
Electromagnetic compatibility (EMC) - Part 5-7: Installation and mitigation guidelines; Degrees of protection by enclosures against electromagnetic disturbances (EM code) (IEC 61000-5-7:2001) |
| EN 61000-6-1-2001 |
電磁兼容性（ＥＭＣ）第6-1部分：通用標準居注商業和輕工業環境的抗擾度 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards; Immunity for residential, commercial and light-industrial environments (IEC 61000-6-1:1997, modified) |
| EN 61000-6-2-2001 |
電磁兼容性（ＥＭＣ）第6-2部分：通用標準工業環境的抗擾度 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards; Immunity for industrial environments (IEC 61000-6-2:1999, modified) |
| EN 61000-6-3-2001 |
電磁兼容性（ＥＭＣ）第6-3部分：通用標準與住宅有關的排放標準商業和輕工業環境 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards; Emission standard for residential, commercial and light-industrial environments (IEC 61000-6-3:1996, modified) |
| EN 61000-6-3-2004 |
電磁兼容性.第6-3部分:通用標準.居注商業和輕工業環境用輻射標準 |
|
| EN 61000-6-4-2001 |
電磁兼容性（ＥＭＣ）第6-4部分：通用標準工業環境用輻射標準 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards; Emission standard for industrial environments (IEC 61000-6-4:1997, modified) |
| EN 61003-1-1993 |
工業過程控制系統模似輸入和兩路或多路輸出的儀器第1部分：性能評定方法 |
Industrial-process control systems- Instruments with analogue inputs and two- or multi-state outputs- Part 1: Methods of evaluating the performance (IEC 61003-1:1991) |
| EN 61003-1-2004 |
工業過程控制系統.模擬輸入和兩路或多路輸出的儀器.第1部分:性能評定方法 |
|
| EN 61006-1993 |
測定電氣絕緣材料玻璃化轉變溫度的試驗方法 |
Methods of test for the determination of the glass transition temperature of electrical insulating materials (IEC 61006:1991) |
| EN 61006-2004 |
電氣絕緣材料.玻璃化轉變溫度測定用試驗方法 |
|
| EN 61007-1997 |
電子和通信設備用變壓器和電感器測量方法和試驗規程 |
Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures (IEC 61007:1994, modified) |
| EN 61008-1-2004 |
家用和類似用途的無綜合過電流保護的剩余電流斷路器(RCCBs).第1部分:通用規則 |
|
| EN 61008-1/prA15-2001 |
家用和類似用途的沒有綜合過電流保護的剩余電流斷路器（RCCBs）第１部分：通用規則 修改草案１５ |
Draft amendment 1 to IEC 61008-1, Ed. 2 |
| EN 61008-1/prA16-1999 |
標準號： |
中文標題： |
| EN 61008-1/prAA-2001 |
家用和類似用途的沒有綜合過電流保護的剩余電流斷路器（RCCBs）第１部分：通用規則 修改草案ＡＡ |
Draft amendment to IEC 61008-1, Ed. 2: Requirements for use of fuses instead of silver wires as SCPD at the short-circuit tests of RCCBs |
| EN 61009-1-2004 |
家用和類似用途的有綜合過電流保護的剩余電流斷路器(RCCBs).第1部分:通用規則 |
|
| EN 61009-1/prA12-1995 |
家用和類似用途的有綜合過電流保護的剩余電流斷路器（RCCBs)第1部分：通用規則 修改草案12 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules; Amendment A12 |
| EN 61009-1/prA16-2001 |
標準號： |
中文標題： |
| EN 61009-1/prA18-1999 |
標準號： |
中文標題： |
| EN 61010-031-2002 |
測量、控制和實驗室用電氣設備的安全要求第3-031部分：電氣測量和試驗用手持探針組件 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2002) |
| EN 61010-1-2001 |
測量、控制和實驗室用電子設備的安全要求第1部分：一般要求 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements (IEC 61010-1:2001) / Note: Includes Corrigendum of June 2002 |
| EN 61010-2-010-1994 |
測量、控制和試驗室用電氣設備的安全要求第2-010部分：材料加熱 用實驗室設備的特殊要求 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials (IEC 61010-2-010:1992, modified) |
| EN 61010-2-020-1994 |
測量、控制和試驗室用電氣設備的安全要求第2-020部分：實驗室離心機的特殊要求 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020, modified) |
| EN 61010-2-032-2002 |
測量、控制和實驗室用電氣設備的安全要求第2-032部分：電氣測量和試驗用手持和手操作電流傳感器的特殊要 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement (IEC 61010-2-032:2002) / Note: Endorsem |
| EN 61010-2-041-1996 |
測量、控制和實驗室用電氣設備的安全要求第２－４１部分：醫療材料處理及實驗室加工用蒸壓器的的特殊要求 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes (IEC 61010-2-041:1996) |
| EN 61010-2-042-1997 |
測量、控制和實驗室用電氣設備的安全要求第2－042部分：醫用材料處理及實驗室加工用毒性氣體蒸壓器和消毒 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes (IEC 61010) |
| EN 61010-2-043-1997 |
測量、控制和實驗室用電氣設備的安全要求第2－043部分：醫用材料處理及實驗室加工用熱空氣或熱惰性氣體干 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-043: Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory proc |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com