標準號 |
中文名稱 |
英文名稱 |
| DIN EN 771-4-2005 |
圬工單位規范.第4部分:高壓蒸氧加氣混凝土圬工單位 |
|
| DIN EN 771-4-2005 |
圬工單位規范.第4部分:高壓蒸氧加氣混凝土圬工單位 |
|
| DIN EN 771-5-2004 |
圬工單位規范.第5部分:人造石料圬工單位 |
|
| DIN EN 771-5-2005 |
圬工單位規范.第5部分:人造石料圬工單位 |
|
| DIN EN 771-6-2001 |
圬工裝置規范.第6部分:天然石料圬工裝置 |
(Specification for masonry units - Part 6: Natural stone masonry units; German version EN 771-6:2000) |
| DIN EN 771-6-2005 |
圬工單位規范.第6部分:天然石料圬工單位 |
|
| DIN EN 772-1-2000 |
圬工單位的試驗方法.第1部分:壓縮強度的測定 |
(Methods of test for masonry units - Part 1: Determination of compressive strength; German version EN 772-1:2000) |
| DIN EN 772-10-1999 |
磚石的檢驗方法.第10部分:氣孔混凝土磚石和石灰砂石中濕含量的測定 |
(Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units; German version EN 772-10:1999) |
| DIN EN 772-11-2000 |
圬工單位的試驗方法.第11部分:集料混凝土、人造石和天然石圬工單位因毛細作用的吸水率及粘土圬工單位吸水初 |
(Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units; German versio |
| DIN EN 772-11-2004 |
砌塊的試驗方法.第11部分:集料混凝土、高壓蒸養加氣混凝土、人造石和天然石砌塊因毛細作用的吸水率及粘土砌塊初始吸水率的測定 |
|
| DIN EN 772-13-2000 |
圬工單位的試驗方法.第13部分:圬工單位濕密度和干總密度的測定 |
(Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone); German version EN 772-13:2000) |
| DIN EN 772-14-2002 |
圬工單位的試驗方法.第14部分:集料混凝土和人造石圬工單位濕度變形的測定 |
(Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units; German version EN 772-14:2001) |
| DIN EN 772-15-2000 |
圬工單位的試驗方法.第15部分:高壓蒸養加氣圬工單位水蒸氣滲透率的測定 |
(Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units; German version EN 772-15:2000) |
| DIN EN 772-16-2000 |
圬工單位的試驗方法.第16部分:尺寸的測定 |
(Methods of test for masonry units - Part 16: Determination of dimensions; German version EN 772-16:2000) |
| DIN EN 772-16-2005 |
圬工單位的試驗方法.第16部分:尺寸測定 |
|
| DIN EN 772-18-2000 |
圬工單位的試驗方法.第18部分:硅酸鈣圬工單位抗凍熔性的測定 |
(Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units; German version EN 772-18:2000) |
| DIN EN 772-19-2000 |
圬工單位的試驗方法.第19部分:大型水平多孔磚圬工單位吸濕膨脹的測定 |
(Methods of test for masonry units - Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units; German version EN 772-19:2000) |
| DIN EN 772-2-1998 |
磚石的檢驗方法.第2部分:混凝土磚石中空隙百分比的測定(用紙張壓痕法) |
(Methods of test for masonry units - Part 2: Determination of percentage of voids in aggregate concrete masonry units (by paper indentation); German version EN 772-2:1998) |
| DIN EN 772-2-2005 |
圬工單位的試驗方法.第2部分:紙壓痕法測定圬工單位孔隙面積百分比 |
|
| DIN EN 772-20-2000 |
圬工單位的試驗方法.第20部分:集料混凝土、人造石和天然石圬工單位表面平整度的測定 |
(Methods of test for masonry units - Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units; German version EN 772-20:2000) |
| DIN EN 772-20-2005 |
圬工單位的試驗方法.第20部分:圬工單位表面平整度測定 |
|
| DIN EN 772-3-1998 |
磚石的檢驗方法.第3部分:用液體靜壓稱重法測定磚瓦中凈重體積和空隙百分比(水下稱重) |
(Methods of test for masonry units - Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing; German version EN 772-3:1998) |
| DIN EN 772-4-1998 |
圬工單位的試驗方法.第4部分:天然石圬工單位的密度、體密度、整體空隙率以及開口空隙率的測定 |
(Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units; German version EN 772-4:1998) |
| DIN EN 772-5-2002 |
圬工單位的試驗方法.第5部分:粘土圬工單位中活性可溶鹽含量的測定 |
(Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units; German version EN 772-5:2001) |
| DIN EN 772-6-2002 |
圬工單位的試驗方法.第6部分:集料混凝土圬工單位彎曲拉伸強度的測定 |
(Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units; German version EN 772-6:2001) |
| DIN EN 772-7-1998 |
磚石的檢驗方法.第7部分:存放在沸水中隔離層用磚瓦的吸水量的測定 |
(Methods of test for masonry units - Part 7: Determination of water absorption of clay masonry damp proof course units by boiling water; German version EN 772-7:1998) |
| DIN EN 772-9-1998 |
磚石的檢驗方法.第9部分:用填砂法測定石灰砂石中空隙體積和凈體積以及空隙百分比的測定 |
(Methods of test for masonry units - Part 9: Determination of volume of and percentage of voids and net volume of calcium silicate masonry units by sand filling; German version EN 772-9:1998) |
| DIN EN 772-9-2005 |
圬工單位的試驗方法.第9部分:通過添加鹽測定黏土和硅酸蓋圬工單位孔隙體積和百分比及凈體積 |
|
| DIN EN 773-1999 |
液壓驅動的污水壓力管道構件的一般要求 |
(General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers; German version EN 733:1999) |
| DIN EN 774-1997 |
園藝機具.手提式電機驅動的樹墻修剪機.安全性 |
(Garden equipment - Hand held, integrally powered hedge trimmers - Safety; German version EN 774:1996 + A1:1997 + A2:1997) |
| DIN EN 774/A3-2002 |
園藝機具.手提式整體電動籬笆修剪機.安全.修改件A3 |
(Garden equipment - Hand-held, integrally powered hedge trimmers - Safety; Amendment A3; German version EN 774:1996/A3:2001) |
| DIN EN 775-1993 |
操縱工業機器人.安全 |
(Manipulating industrial robots; safety (ISO 10218:1992, modified); German version EN 775:1992 + AC:1993) |
| DIN EN 777-1-2003 |
非家用架空式多用燃?xì)鉅t輻射管加熱器系統.第1部分:D系統安全 |
(Multi burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D, safety; German version EN 777-1:1999 + A1:2001 + A2:2001 + A3:2002) |
| DIN EN 777-2-2003 |
非家用架空式多用燃?xì)鉅t輻射管加熱器系統.第2部分:E系統安全 |
(Multi burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E, safety; German version EN 777-2:1999 + A1:2001 + A2:2001 + A3:2002) |
| DIN EN 777-3-2003 |
非家用架空式多用燃?xì)鉅t輻射管加熱器系統.第3部分:F系統安全 |
(Multi burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3: System F, safety; German version EN 777-3:1999 + A1:2001 + A2:2001 + A3:2002) |
| DIN EN 777-4-2003 |
非家用架空式多用燃?xì)鉅t輻射管加熱器系統.第4部分:H系統安全 |
(Multi burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H, safety; German version EN 777-4:1999 + A1:2001 + A2:2001 + A3:2002) |
| DIN EN 778-2002 |
無風扇支持燃燒氣體和/或燃燒物質傳輸、凈熱輸入功率不超過70kW的空間加熱用家用燃?xì)馐綇?qiáng)制對流空氣加熱器 |
(Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products (includes amendment A1:2001); German version EN 778:1998 + A1: |
| DIN EN 779-2003 |
一般通風用顆�？諝膺^濾器.過濾性能測定 |
(Particulate air filters for general ventilation - Determination of the filtration performance; German version EN 779:2002) |
| DIN EN 78-1981 |
窗戶的檢驗方法.檢驗報告的格式 |
(Methods of testing windows; form of test report) |
| DIN EN 786 Berichtigung 1-2005 |
園藝機具.電動步行手扶和手持式割草機及草地修邊機.機械安全 |
|
| DIN EN 786-2001 |
園林設備.電驅動手操作和手持割草機和草坪棱邊修剪機.機械安全 |
(Garden equipments - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge-trimmers - Mechanical safety (includes amendment A1:2001); German version EN 786:1996 + A1:2001) |
| DIN EN 787-1994 |
食品運輸袋.聚乙烯薄膜提袋. |
(Sacks for the transport of food aid - Sacks made of polyethylene film; German version EN 787:1994) |
| DIN EN 788-1994 |
食品運輸袋.軟管狀提袋.復合薄膜包裝 |
(Sacks for the transport of food aid - Tubular sacks made of composite film; German version EN 788:1994) |
| DIN EN 789-1996 |
木制結構,檢驗方法.復合木材制品機械性能的測定 |
(Timber structures - Test methods - Determination of mechanical properties for wood based panels; German version EN 789:1995) |
| DIN EN 789-2005 |
木結構.試驗方法.木基板材機械特性的測定 |
|
| DIN EN 790-2001 |
內河航運船只.45度至60度傾斜角的扶梯.要求和類型 |
(Inland navigation vessels - Stairs with inclination angles of 45?to 60?- Requirements, types; German version EN 790:2001) |
| DIN EN 791-1996 |
成套鉆具.安全 |
(Drill rigs - Safety; German version EN 791:1995) |
| DIN EN 792-1-2001 |
手持非電動工具.安全要求.第1部分:無螺紋的機械緊固件的裝配動力工具 |
(Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners; German version EN 792-1:2000) |
| DIN EN 792-10-2001 |
手持非電動工具.安全要求.第10部分:壓力動力工具 |
(Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools; German version EN 792-10:2000) |
| DIN EN 792-11-2001 |
手持非電動工具.安全要求.第10部分:步?jīng)_輪廓機和剪切機 |
(Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears; German version EN 792-11:2000) |
| DIN EN 792-12-2001 |
手持非電動工具.安全要求.第12部分:小型圓盤、擺式往復鋸 |
(Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws; German version EN 792-12:2000) |
| DIN EN 792-13 Berichtigung 1-2001 |
DINEN792-13-2001的技術勘誤 |
(Corrigendum to DIN EN 792-13:2001-04) |
| DIN EN 792-13-2001 |
手持非電動工具.安全要求.第13部分:緊固件傳動的工具 |
(Hand-held non electric power tools - Safety requirements - Part 13: Fastener driving tools; German version EN 792-13:2000) |
| DIN EN 792-2-2001 |
手持非電動工具.安全要求.第2部分:切割和卷邊動力工具 |
(Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools; German version EN 792-2:2000) |
| DIN EN 792-3-2001 |
手持非電動工具.安全要求.第3部分:鉆頭和攻絲機 |
(Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers; German version EN 792-3:2000) |
| DIN EN 792-4-2001 |
手持非電動工具.安全要求.第4部分:非轉式?jīng)_擊動力工具 |
(Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools; German version EN 792-4:2000) |
| DIN EN 792-5-2001 |
手持非電動工具.安全要求.第5部分:轉式?jīng)_擊鉆 |
(Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills; German version EN 792-5:2000) |
| DIN EN 792-6-2001 |
手持非電動工具.安全要求.第6部分:螺紋緊固件用裝配動力工具 |
(Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners; German version EN 792-6:2000) |
| DIN EN 792-7-2002 |
手持非電動工具.安全要求.第7部分:研磨機 |
(Hand-held non-electric power tools - Safety requirements - Part 7: Grinders; German version EN 792-7:2001) |
| DIN EN 792-8-2001 |
手持式非電動工具.安全要求.第8部分:拋光機和砂磨具 |
(Hand-held non-electric power tools - Safety requirements - Part 8: Polishers and sanders; German version EN 792-8:2001) |
| DIN EN 792-9-2001 |
手持式非電動工具.安全要求.第9部分:模研磨機 |
(Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders; German version EN 792-9:2001) |
| DIN EN 793-1998 |
醫療提供單位安全性的特殊要求 |
(Particular requirements for safty of medical supply units; German version EN 793:1997) |
| DIN EN 794-1-2001 |
人工肺呼吸裝置.第1部分:監護用人工呼吸裝置的特殊要求 |
(Lung ventilators - Part 1: Particular requirements for critical care ventilators (includes Amendment A1:2000); German version EN 794-1:1997 + A1:2000) |
| DIN EN 794-2-1997 |
人工肺呼吸裝置.第2部分:家用人工呼吸裝置的特殊要求 |
(Lung ventilators - Part 2: Particular requirements for home care use; German version EN 794-2:1997) |
| DIN EN 794-3-1998 |
人工肺呼吸裝置.第3部分:事故呼吸裝置和運輸呼吸裝置的特殊要求 |
(Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators; German version EN 794-3:1998) |
| DIN EN 795-1996 |
防墜落.止檔裝置.要求和檢驗方法 |
(Protection against falls from a height - Anchor devices - Requirements and testing; German version EN 795:1996) |
| DIN EN 795/A1-2001 |
防高空墜落設備.緊系設備.要求和試驗.修改件A1 |
(Protection against falls from a height - Anchor devices - Requirements and testing; Amendment A1; German version EN 795:1996/A1:2000) |
| DIN EN 796-1996 |
條形碼.符號.標識 |
(Bar coding - Symbology identifiers; German version EN 796:1995) |
| DIN EN 797-1996 |
條形碼.符號規范“EAN/UPC“ |
(Bar coding - Symbology specifications “EAN/UPC“; German version EN 797:1995) |
| DIN EN 798-1996 |
條形碼.符號規范“Codabar“ |
(Bar coding - Symbology specifications “Codabar“; German version EN 798:1995) |
| DIN EN 799-1996 |
條形碼.符號規范“Code128“ |
(Bar coding - Symbology specifications “Code 128“; German version EN 799:1995) |
| DIN EN 80-2002 |
墻掛式便器.連接尺寸 |
(Wall-hung urinals - Connecting dimensions; German version EN 80:2001) |
| DIN EN 800-1996 |
條形碼.符號規范“Code39“ |
(Bar coding - Symbology specifications “Code 39“; German version EN 800:1995) |
| DIN EN 801-1996 |
條形碼.符號規范“隔行2of5“ |
(Bar coding - Symbology specifications “Interleaved 2 of 5“; German version EN 801:1995) |
| DIN EN 802-1994 |
塑料.管道和防護管系統.噴鑄.壓力管用熱塑異型件.擠壓造成最大變形的試驗方法 |
(Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing; German version EN 802:1994) |
| DIN EN 803-1994 |
塑料管道系統.壓力管道用插接管套相連的熱塑噴鑄管件.無軸向應力的抗瞬時內壓的檢驗方法 |
(Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust; German version EN 803:1994) |
| DIN EN 804-1994 |
塑料.管道系統.壓鑄件.壓力管道用帶膠粘套管連接的異型管件.抗流體靜力瞬時內壓能力的檢驗方法 |
(Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure; German version EN 804:1994) |
| DIN EN 80416-1-2002 |
設備上使用的圖形符號的基本原則.第1部分:符號原型的創建 |
(Basic principles for graphical symbols for use on equipment - Part 1: Creation of symbol originals (IEC 80416-1:2001); German version EN 80416-1:2001) |
| DIN EN 80416-2-2002 |
設備上使用的圖形符號的基本原則.第2部分:箭頭的形式和符號 |
(Basic principles for graphical symbols for use on equipment - Part 2: Form and use of arrows (ISO 80416-2:2001); German version EN 80416-2:2001) |
| DIN EN 80416-3-2003 |
用在設備上的圖形符號的基本原則.第3部分:圖形符號使用指南 |
(Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols (IEC 80416-3:2002); German version EN 80416-3:2002) |
| DIN EN 805-2000 |
供水.建筑物外部系統和件的要求 |
(Water supply - Requirements for systems and components outside buildings; German version EN 805:2000) |
| DIN EN 806-1-2001 |
建筑物內部飲用水供應設備規范.第1部分:總則 |
(Specifications for installations inside buildings conveying water for human consumption - Part 1: General; German version EN 806-1:2001 + A1:2001) |
| DIN EN 806-2-2005 |
建筑物內部人類生活用水輸送設備規范.第2部分:設計 |
|
| DIN EN 809-1998 |
液體泵和泵組件.一般安全技術要求 |
(Pumps and pump units for liquids - Common safety requirements; German version EN 809:1998) |
| DIN EN 81-1-2000 |
升降機施工和安裝的安全規則.第1部分:電動升降機 |
(Safety rules for the construction and installation of lifts - Part 1: Electric lifts (includes Corrigendum AC:1999); German version EN 81-1:1998 + AC:1999) |
| DIN EN 81-1/A2-2005 |
升降機施工和安裝的安全規則.第1部分:電動升降機.A2:機械和滑輪間隔 |
|
| DIN EN 81-2-2000 |
升降機施工和安裝的安全規則.第2部分:液壓升降機 |
(Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts (includes corrigendum AC:1999); German version EN 81-2:1998 + AC:1999) |
| DIN EN 81-2/A2-2005 |
升降機施工和安裝的安全規則.第2部分:液壓升降機.A2:機械和滑輪間隔 |
|
| DIN EN 81-3-2001 |
升降機施工和安裝的安全規則.第3部分:電動升降機和液壓升降機 |
(Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts; German version EN 81-3:2000) |
| DIN EN 81-70-2005 |
電梯建造和安裝的安全規則.客梯及客貨兩用梯的特殊應用.第70部分:電梯對包括殘疾人在內的所有人員的可達性 |
|
| DIN EN 81-71-2005 |
電梯建造和安裝的安全規則.客梯和客貨兩用梯的特殊應用.第71部分:耐破壞性電梯 |
|
| DIN EN 81-80-2004 |
電梯建造和安裝的安全準則.現有電梯.第80部分:提高現有載人電梯和客貨兩用電梯安全性的規則 |
(Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts; German version EN 81-80:2003) |
| DIN EN 81-80-2004 |
電梯建造和安裝的安全準則.現有電梯.第80部分:提高現有載人電梯和客貨兩用電梯安全性的規則 |
|
| DIN EN 810-1997 |
帶電驅動壓縮機的干躁器.功率,標記,功能要求和技術數據單 |
(Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet; German version EN 810:1997) |
| DIN EN 811-1996 |
機器的安全性.人體下肢可觸及的危險區域的安全距離 |
(Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs; German version EN 811:1996) |
| DIN EN 812-2002 |
工業用防撞帽(包括修改件A1) |
(Industrial bump caps (includes Amendment A1:2001); German version EN 812:1997 + A1:2001) |
| DIN EN 813-1997 |
防止墜落用的人員防護設備.座位上的安全帶 |
(Personal protective equipment for prevention of falls from a height - Sit harnesses; German version EN 813:1997) |
| DIN EN 814-1-1997 |
帶電驅動壓縮機的空調機和熱力泵.制冷.第1部分:名稱,定義和標識 |
(Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 1: Terms, definitions and designations; German version EN 814-1:1997) |
| DIN EN 814-2-1997 |
帶電驅動壓縮機的空調機和熱力泵.制冷.第2部分:符號指示的檢驗和要求 |
(Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 2: Testing and requirements for marking; German version EN 814-2:1997) |
| DIN EN 814-3-1997 |
帶電驅動壓縮機的空調機和熱力泵.制冷.第3部分:要求 |
(Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 3: Requirements; German version EN 814-3:1997) |
| DIN EN 815-1996 |
無防護平巷掘進機和插入巖石的無鉆桿豎井鉆機的安全 |
(Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock; German version EN 815:1996) |
| DIN EN 815/A1-2005 |
巖石用無防護隧道鉆機和無桿鉆井機安全 |
|
| DIN EN 816-1997 |
衛生器具附件.自鎖附件PN10 |
(Sanitary tapware - Automatic shut-off valves PN 10; German version EN 816:1996) |
| DIN EN 817-1997 |
衛生設備管件.機械混合器(PN10).普通技術規范 |
(Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications; German version EN 817:1997) |
| DIN EN 81714-2-1999 |
產品技術文件用圖形符號的設計.第2部分:包括相關目錄圖形符號及其交換要求的計算機適用的圖形符號規范 |
(Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange (IEC 817 |
| DIN EN 81714-3-2001 |
產品技術文件用圖形符號的設計.第3部分:連接節點、網絡及其編碼的分類 |
(Design of graphical symbols for use in the technical documentation of products - Part 3: Classification of connect nodes, networks and their encoding (IEC 81714-3:1998); German version EN 81714-3:2001) |
| DIN EN 818-1-1996 |
起重用短鏈條.安全性.第1部分:一般驗收條件 |
(Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance; German version EN 818-1:1996) |
| DIN EN 818-2-1996 |
起重用短環圓鋼鏈條.安全性.第2部分:質量等級8止檔鏈用中級公差圓鋼鏈條 |
(Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings, grade 8; German version EN 818-2:1996) |
| DIN EN 818-3-1999 |
起重用短環圓鋼鏈條.安全性.第3部分:用作止檔鏈條的中級公差的圓鋼鏈.質量等級4 |
(Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings; grade 4; German version EN 818-3:1999) |
| DIN EN 818-4-1996 |
起重用短環圓鋼鏈條.安全性.第4部分:質量等級8止檔鏈 |
(Short link chain for lifting purposes - Safety - Part 4: Chain slings, grade 8; German version EN 818-4:1996) |
| DIN EN 818-5-1999 |
起重用短環圓鋼鏈條.安全性.第5部分:止擋環.質量等級4 |
(Short link chain for lifting purposes - Safety - Part 5: Chain slings; grade 4; German version EN 818-5:1999) |
| DIN EN 818-6-2000 |
起重用短環圓鋼鏈條.安全性.第6部分:吊式鏈鎖.生產商提供的用于使用和維修的信息規范 |
(Short link chain for lifting purposes - Safety - Part 6: Chain slings; specification for information for use and maintenance to be provided by the manufacturer; German version EN 818-6:2000) |
| DIN EN 818-7-2002 |
升降用的短節鏈條的安全.第7部分:T等級(類型T、DAT和DT)、精密公差吊鏈 |
(Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, grade T (Types T, DAT and DT); German version EN 818-7:2002) |
| DIN EN 820-2-2003 |
高級工業陶瓷.整體陶瓷的試驗方法.熱機械特性.第1部分:自重變形的測定 |
(Advanced technical ceramics - Methods of test for monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation; German version EN 820-2:2003) |
| DIN EN 820-3-2004 |
高級工業陶瓷.塊體陶瓷的試驗方法.熱機械特性.第3部分:水淬火法測定耐熱沖擊性 |
|
| DIN EN 82045-1-2002 |
文獻管理.第1部分:原理和方法 |
(Document management - Part 1: Principles and methods (IEC 82045-1:2001); German version EN 82045-1:2001) |
| DIN EN 82045-2-2005 |
文件管理.第2部分:數據素和信息參考模型 |
|
| DIN EN 821-1-1995 |
高技術陶瓷.整體陶磁.單片陶瓷的熱物理特性.第1部分:熱膨脹的測定 |
(Advanced technical ceramics - Monolithic ceramics - Thermophysical properties - Part 1: Determination of thermal expansion; German version EN 821-1:1995) |
| DIN EN 821-2-1997 |
高技術陶瓷.整體陶磁.熱物理性能.第2部分:用激光閃光法(或熱能脈沖)測量導熱能力 |
(Advanced technical ceramics - Monolithic ceramics, thermo-physical properties - Part 2: Determination of thermal diffusity by the laser flash (or heat pulse) method; German version EN 821-2:1997) |
| DIN EN 822-1994 |
建筑物用熱絕緣產品.長度和寬度測定 |
(Thermal insulating products for building applications - Determination of length and width; German version EN 822:1994) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com