標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 13803-2004 |
色漆和清漆.20?漆膜反射光澤度的測定 |
|
| DIN EN ISO 13819-1-1997 |
石油和天然氣工業.近海結構設計.第1部分:一般要求 |
(Petroleum and natural gas industries - Offshore structures - Part 1: General requirements (ISO 13819-1:1995); German version EN ISO 13819-1:1997) |
| DIN EN ISO 13844-2000 |
塑料管道系統.用PVC-U管道的未增塑聚氯乙烯(PVC-U)彈性密封圈型套管接頭.負壓力下滲漏緊密度的試驗方法 |
(Plastics piping systems - Elastomeric sealing ring type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000); German version EN ISO 13844:2000) |
| DIN EN ISO 13845-2000 |
塑料管道系統.用PVC-U管道的未增塑聚氯乙烯(PVC-U)彈性密封圈型套管接頭.在內壓力下和角度偏離下滲漏緊密度 |
(Plastics pipes systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000); German version EN ISO |
| DIN EN ISO 13846-2001 |
塑料管道系統.熱塑壓力管用端部荷載軸承和無端部荷載軸承組件和連接件.在水內壓下測定長期密封性的試驗方法 |
(Plastic piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000); German version EN ISO 13846:2000) |
| DIN EN ISO 13884-2005 |
動物和植物脂肪和油.用紅外光譜測定法測定孤立的反式異構體 |
|
| DIN EN ISO 13897-2004 |
牙科學.汞齊合金膠囊 |
|
| DIN EN ISO 13900-2002 |
鋼.硼含量測定.蒸餾后姜黃素光譜測定法 |
(Steel - Determination of boron content - Curcumin spectrophotometric method after distillation (ISO 13900:1997); ; German version EN 13900:2002) |
| DIN EN ISO 13916-1996 |
焊接.預熱溫度,層間溫度和預加熱的維持溫度測量的導則 |
(Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996); German version EN ISO 13916:1996) |
| DIN EN ISO 13918-1998 |
焊接.電弧螺栓焊接用螺栓和陶瓷套圈 |
(Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:1998); German version EN ISO 13918:1998) |
| DIN EN ISO 13919-1-1996 |
焊接.電子和激光射線焊接接頭.不均勻性評定組別的指南.第1部分:鋼 |
(Welding - Electrons and laser beam welded joints; guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996); German version EN ISO 13919-1:1996) |
| DIN EN ISO 13919-2-2001 |
焊接.電子和激光束焊接接頭.缺陷的質量級別導則.第1部分:鋁及其可焊合金 |
(Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001); German version EN ISO 13919-2:2001) |
| DIN EN ISO 13920-1996 |
焊接.焊接結構的通用公差.長度和角度尺寸.形狀和位置 |
(Welding - General tolerances for welded constructions - Dimensions for lengths and angles; shape and position (ISO 13920:1996); German version EN ISO 13920:1996) |
| DIN EN ISO 13927-2003 |
塑料.用錐形輻射加熱器和熱電堆探測器進行簡單熱釋放試驗 |
(Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2001); German version EN ISO 13927:2003) |
| DIN EN ISO 13929-2001 |
小型船舶.操舵裝置.齒輪鏈接系統 |
(Small craft - Steering gear - Geared link systems (ISO 13929:2001); German version EN ISO 13929:2001) |
| DIN EN ISO 13934-1-1999 |
織物.織物表面結構拉伸特性.第1部分:用條形拉伸法測定最大拉伸力和最大拉伸力擴展 |
(Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:1999); German version EN ISO 13934-1:1999) |
| DIN EN ISO 13934-2-1999 |
織物.織物表面結構拉伸特性.第2部分:用織物抓樣強力試驗測定最大拉伸力 |
(Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:1999); German version EN ISO 13934-2:1999) |
| DIN EN ISO 13935-1-1999 |
織物.織物表面結構和成衣結構中接縫的拉伸試驗.第1部分:用條狀拉伸試驗測定接縫的最大拉伸力 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:1999); German version EN ISO 13935-1:1999) |
| DIN EN ISO 13935-2-1999 |
織物.織物表面結構和成衣結構中接縫的拉伸試驗.第2部分:用織物抓樣強力試驗測定接縫的最大拉伸力 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:1999); German version EN ISO 13935-2:1999) |
| DIN EN ISO 13936-1-2004 |
紡織品.機織物縫合處紗線抗脫性測定.第1部分:固定接縫開口法 |
|
| DIN EN ISO 13936-2-2004 |
紡織品.機織物縫合處紗線抗脫性測定.第2部分:固定負載法 |
|
| DIN EN ISO 13937-1-2000 |
紡織品.紡織物的撕裂特性.第1部分:用彈道擺錘法對撕裂力量的測定 |
(Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) (ISO 13937-1:2000); German version EN ISO 13937-1:2000) |
| DIN EN ISO 13937-2-2000 |
紡織品.紡織物的撕裂特性.第2部分:褲型試驗樣品撕裂力量的測定 |
(Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (single tear method) (ISO 13937-2:2000); German version EN ISO 13937-2:2000) |
| DIN EN ISO 13937-3-2000 |
紡織品.紡織物的撕裂特性.第3部分:翅型試驗樣品撕裂力量的測定 |
(Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) (ISO 13937-3:2000); German version EN ISO 13937-3:2000) |
| DIN EN ISO 13937-4-2000 |
紡織品.紡織物的撕裂特性.第4部分:舌型試驗樣品撕裂力量的測定 |
(Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) (ISO 13937-4:2000); German version EN ISO 13937-4:2000) |
| DIN EN ISO 13938-1-1999 |
紡織材料.織物破裂特性.第1部分:測定抗破碎強度及爆裂膨脹的液壓方法 |
(Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999); German version EN ISO 13938-1:1999) |
| DIN EN ISO 13938-2-1999 |
紡織材料.織物破裂特性.第2部分:測定抗破裂強度及爆裂膨脹的氣壓方法 |
(Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999); German version EN ISO 13938-2:1999) |
| DIN EN ISO 13943-2000 |
防火安全.詞匯 |
(Fire safety - Vocabulary (ISO 13943:2000); Trilingual version EN ISO 13943:2000) |
| DIN EN ISO 13969-2004 |
奶和奶制品.微生物抑制劑試驗的標準化描述指南 |
|
| DIN EN ISO 13995-2001 |
防護服.機械性能.抗穿刺性和抗動態撕裂性測定的試驗方法 |
(Protective clothing - Mechanical properties - Test method for determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000); German version EN ISO 13995:2000) |
| DIN EN ISO 13997-1999 |
防護服裝.機械特性.抗銳利物劃割能力的測量 |
(Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:1999); German version EN ISO 13997:1999) |
| DIN EN ISO 13998-2003 |
防護服.防小折刀切割和刺穿的圍裙、褲子和背心 |
(Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003); German version EN ISO 13998:2003) |
| DIN EN ISO 140-1-1998 |
聲學.建筑物和建筑構件的隔音測量.第1部分:抑制側向傳輸?shù)膶?shí)驗室試驗裝置的要求 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission (ISO 140-1:1997); German version EN ISO 140-1:1997) |
| DIN EN ISO 140-12-2000 |
聲學.建筑物和建筑構件的隔音測量.第12部分:通道樓板的房間對房間氣載和沖擊聲隔絕的試驗室測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor (ISO 140-12:2000); German version EN ISO 140-12:2000) |
| DIN EN ISO 140-14-2004 |
聲學.建筑物和建筑構件的隔音測量.第14部分:場地的特殊情況的指南 |
|
| DIN EN ISO 140-4-1998 |
聲學.建筑物和建筑構件的隔音測量.第4部分:房間之間氣載聲音隔絕的場測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurement of airborne sound insulation between rooms (ISO 140-4:1998); German version EN ISO 140-4:1998) |
| DIN EN ISO 140-5-1998 |
聲學.建筑物和建筑構件的隔音測量.第5部分:房屋正面和正面構件氣載聲隔絕的測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurement of airborne sound insulation of facade elements and facades (ISO 140-5:1998); German version EN ISO 140-5:1998) |
| DIN EN ISO 140-6-1998 |
聲學.建筑物和建筑構件的隔音測量.第6部分:試驗臺上樓層板蹬踏聲隔絕的測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors (ISO 140-6:1998); German version EN ISO 140-6:1998) |
| DIN EN ISO 140-7-1998 |
聲學.建筑物和建筑構件的隔音測量.第7部分:建筑物里樓層板蹬踏聲隔絕的測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors (ISO 140-7:1998); German version EN ISO 140-7:1998) |
| DIN EN ISO 140-8-1998 |
聲學.建筑物內及建筑構件的隔音性測量.第8部分:負荷標準地板上進行地板鋪面時傳送出的沖擊聲音減弱的實驗室 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor (ISO 140-8:1997); German version EN ISO 14 |
| DIN EN ISO 14001-1996 |
環境管理系統.應用導則規范 |
(Environmental management systems - Specifications with guidance for use (ISO 14001:1996); German version EN ISO 14001:1996) |
| DIN EN ISO 14001-2005 |
環境管理系統.使用的要求和指南 |
|
| DIN EN ISO 1401-2000 |
農業噴霧用橡膠軟管 |
(Rubber hoses for agricultural spraying (ISO 1401:1999); German version EN ISO 1401:1999) |
| DIN EN ISO 1402-1996 |
橡膠和塑料軟管及軟管組件.液壓靜力試驗 |
(Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994); German version EN ISO 1402:1996) |
| DIN EN ISO 14020-2002 |
環境標簽和聲明.一般原則 |
(Environmental labels and declarations - General principles (ISO 14020:2000); German version EN ISO 14020:2001) |
| DIN EN ISO 14021-2001 |
環境標簽和聲明.自聲明的環境要求(II型環境標簽) |
(Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:1999); German version EN ISO 14021:2001) |
| DIN EN ISO 14024-2001 |
環境標簽和聲明.I式環境標簽.原則和規程 |
(Environmental labels and declarations - Type I environmental labelling - Principles and procedures (ISO 14024:1999); German version EN ISO 14024:2000) |
| DIN EN ISO 1403-1997 |
一般目的用水時使用的帶織物加固內襯的橡膠軟管.規范 |
(Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:1995); German version EN ISO 1403:1997) |
| DIN EN ISO 14031-2000 |
環境管理.環境性能評定.導則 |
(Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:1999); German version EN ISO 14031:1999) |
| DIN EN ISO 14040-1997 |
環境管理.生態平衡.原則和總體要求 |
(Environmental management - Life cycle assessment - Principles and framework (ISO 14040:1997); German version EN ISO 14040:1997) |
| DIN EN ISO 14041-1998 |
環境管理.生態平衡.目的,研究領域以及生態平衡標單的確定 |
(Environmental management - Life cycle assessment - Goal and scope definition and life cycle inventory analysis (ISO 14041:1998); German version EN ISO 14041:1998) |
| DIN EN ISO 14042-2000 |
環境管理.生物圈評定.生物圈影響評定 |
(Environmental management - Life cycle assessment - Life cycle impact assessment (ISO 14042:2000); German version EN ISO 14042:2000) |
| DIN EN ISO 14043-2000 |
環境管理.生物圈評定.生物圈解釋 |
(Environmental management - Life cycle assessment - Life cycle interpretation (ISO 14043:2000); German version EN ISO 14043:2000) |
| DIN EN ISO 14111-2000 |
天然氣.分析痕量檢測能力指南 |
(Natural gas - Guidelines to traceability in analysis (ISO 14111:1997); German version EN ISO 14111:1999) |
| DIN EN ISO 14113-1997 |
氣焊設備.最大工作壓力450巴以下壓力液化氣體用橡膠及塑料軟管管道 |
(Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997); German version EN ISO 14113:1997) |
| DIN EN ISO 14114-1999 |
氣焊設備.焊接,切割和相關工藝用乙炔鋼瓶-電池設備.一般要求 |
(Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:1999); German version EN ISO 14114:1999) |
| DIN EN ISO 14122-1-2002 |
機器安全.機器接近的固定方式.第1部分:兩種水平之間的固定方式的選擇 |
(Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001); German version EN ISO 14122-1:2001) |
| DIN EN ISO 14122-2-2002 |
機器安全.機器接近的固定方式.第2部分:工作平臺和通路 |
(Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001); German version EN ISO 14122-2:2001) |
| DIN EN ISO 14122-3-2002 |
機器安全.機器接近的固定方式.第3部分:樓梯、梯子和護欄 |
(Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001); German version EN ISO 14122-3:2001) |
| DIN EN ISO 14122-4-2004 |
機械安全.進入機械的固定方式.第4部分:固定梯子 |
|
| DIN EN ISO 14125 Berichtigung 1-2003 |
DINENISO14125-1998的技術勘誤 |
(Corrigenda to DIN EN ISO 14125:1998-06 (EN ISO 14125:1998/AC:2002)) |
| DIN EN ISO 14125-1998 |
纖維增強塑料.彎曲性能測定 |
(Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998); German version EN ISO 14125:1998) |
| DIN EN ISO 14126 Berichtigung 1-2003 |
DINENISO14126-2000的技術勘誤 |
(Corrigenda to DIN EN ISO 14126:2000-12 (EN ISO 14126:1999/AC:2002)) |
| DIN EN ISO 14126-2000 |
纖維增強塑料混合物.水平方向壓縮能力的測定 |
(Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999) |
| DIN EN ISO 14129-1998 |
纖維增強塑料.測定切應力/切變形用45度層壓塑料的抗伸試驗.層面中抗剪模數的曲線 |
(Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by45 tension test method (ISO 14129:1997); German version EN ISO 14129:1997) |
| DIN EN ISO 14130-1998 |
纖維增強塑料.用短梁按三點法測定表面層間抗剪強度 |
(Fibre reinforced plastic composites - Determination of apparent interlaminar shear strength by short beam-method (ISO 14130:1997); German version EN ISO 14130:1997) |
| DIN EN ISO 14159-2004 |
機械安全.機械設計的衛生要求 |
|
| DIN EN ISO 14160-1998 |
源于動物成份一次性用醫學產品的消毒.液體消毒液消毒的確認和例行監測 |
(Sterilization of single-use medical devices incorporating materials of animal origin - Validation and routine control of sterilization by liquid chemical sterilants (ISO 14160:1998); German version EN ISO 14160:1998) |
| DIN EN ISO 14161-2001 |
醫療保健產品的消毒.生物指示劑.結果的選擇、使用和解釋導則 |
(Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2000); German version EN ISO 14161:2000) |
| DIN EN ISO 14163-1999 |
聲學.消音器噪聲控制指南 |
(Acoustics - Guidelines for noise control by silencers (ISO 14163:1998); German version EN ISO 14163:1998) |
| DIN EN ISO 14172-2004 |
焊接消耗品.鎳和鎳合金的手工金屬弧焊接的藥皮電焊條.分類 |
|
| DIN EN ISO 14181-2001 |
動物飼料.有機氯化物農藥殘留物的測定.氣相色譜法 |
(Animal feeding stuffs - Determination of residues of organochlorine pesticides - Gas chromatographic method (ISO 14181:2000); German version EN ISO 14181:2000) |
| DIN EN ISO 14182-2000 |
動物飼料.有機磷殺蟲劑殘留物的測定.氣相色譜法 |
(Animal feeding stuffs - Determination of residues of organophosphorus pesticides - Gas chromatographic method (ISO 14182:1999); German version EN ISO 14182:1999) |
| DIN EN ISO 14184-1-1999 |
紡織物.甲醛含量的測定.第1部分:游離和水解甲醛(水萃取法) |
(Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (water extraction method) (ISO 14184-1:1998); German version EN ISO 14184-1:1998) |
| DIN EN ISO 14184-2-1998 |
織物.甲醛含量的測定.第2部分:游離甲醛(水蒸氣吸收法) |
(Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) (ISO 14184-2:1998); German version EN ISO 14184-2:1998) |
| DIN EN ISO 1421-1998 |
用橡膠和塑料涂層的織物.抗拉強度和斷裂伸長的測定 |
(Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:1998); German version EN ISO 1421:1998) |
| DIN EN ISO 14246-2001 |
可運輸氣瓶.氣瓶閥.生產試驗和檢驗 |
(Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections (ISO 14246:2001); German version EN ISO 14246:2001) |
| DIN EN ISO 14253-1 Bb.1-2000 |
幾何產品規范(GPS).通過對工件和測量設備的測量進行檢驗.產品檢驗過程中測量設備的校正,在GPS測量中不確定 |
(Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 14253-2:1999 |
| DIN EN ISO 14253-1-1999 |
幾何產品規范(GPS).通過測量檢驗工件和測量?jī)x器.第1部分:用規范對一致性或不一致性進行檢驗的判定規則 |
(Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998): German version EN ISO 14253-1:1998) |
| DIN EN ISO 14257-2002 |
聲學.評價其聲響性能用工作室空間聲音分布曲線的測量及參數描述(ISO14257:2001) |
(Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001); German version EN ISO 14257:2001) |
| DIN EN ISO 14270-2002 |
電阻點焊、滾焊和凸焊機械剝離試驗的規程和樣品尺寸 |
(Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2000); German version EN ISO 14270:2001) |
| DIN EN ISO 14271-2002 |
電阻點焊、凸焊和滾焊的維氏硬度試驗(低荷載和超微硬度) |
(Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness) (ISO 14271:2000); German version EN ISO 14271:2001) |
| DIN EN ISO 14272-2002 |
電阻點焊和凸焊十字形拉力試驗的規程和樣品尺寸 |
(Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2000); German version EN ISO 14272:2001) |
| DIN EN ISO 14273-2002 |
電阻點焊、縫焊和凸焊的抗剪試驗用樣品尺寸和程序(ISO14273:2000) |
(Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds (ISO 14273:2000); German version EN ISO 14273:2002) |
| DIN EN ISO 14284-2003 |
鋼鐵.測定化合物用樣品的取樣和制備方法 |
(Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996); German version EN ISO 14284:2002) |
| DIN EN ISO 14310-2003 |
石油和天然氣工業.下井設備.封隔器和橋塞 |
(Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2001); German version EN ISO 14310:2001; German and English texts) |
| DIN EN ISO 14314-2004 |
往復式內燃機.反沖起動設備.一般安全要求 |
|
| DIN EN ISO 14327-2004 |
電阻焊接.電阻點焊、凸焊和縫焊的可焊性凸角的測定過程 |
|
| DIN EN ISO 14344-2005 |
焊接和類似工藝.熔化和氣體保護電焊過程.消耗品的采購指南 |
|
| DIN EN ISO 14344-2005 |
焊接和類似工藝.熔化和氣體保護電焊過程.消耗品的采購指南 |
|
| DIN EN ISO 14372-2002 |
焊接消耗物.通過測量可擴散氫測定手工金屬電弧焊電極的抗?jié)裥?/td>
| (Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2000); German version EN ISO 14372:2002) |
| DIN EN ISO 14402-1999 |
水質.流量分析方法測定苯酚指數(FIA和CFA) |
(Water quality - Determination of phenol index by flow analysis (FIA and CFA) (ISO 14402:1999); German version EN ISO 14402:1999) |
| DIN EN ISO 14403-2002 |
水質.用連續流量分析法測定總氰化物和游離氰化物含量 |
(Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002); German version EN ISO 14403:2002) |
| DIN EN ISO 14408-2005 |
激光手術用氣管掐管.標識及隨機文件要求 |
|
| DIN EN ISO 14419-1999 |
紡織材料.耐油性.耐碳?xì)浠衔锏脑囼?yàn) |
(Textiles - Oil repellency - Hydrocarbon resistance test (ISO 14419:1998); German version EN ISO 14419:1999) |
| DIN EN ISO 14438-2002 |
建筑物用玻璃.能量平衡值的測定.計算法 |
(Glass in building - Determination of energy balance value - Calculation method (ISO 14438:2002); German version EN ISO 14438:2002) |
| DIN EN ISO 14453-1998 |
紙漿.丙酮-溶解物質的測定 |
(Pulps - Determination of acetone-soluble matter (ISO 14453:1997); German version EN ISO 14453:1998) |
| DIN EN ISO 14460-2002 |
汽車賽車手防護服.防熱和防火焰.性能要求和檢驗方法 |
(Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods (ISO 14460:1999 + Amd. 1:2002) (includes Corrigendum AC:1999 and Amendment A1:2002); German version EN ISO 14460:1999 + AC:1 |
| DIN EN ISO 14501-1999 |
奶和奶粉.黃曲霉毒素M1含量的測定.用immunoaffinitiy色譜法提煉和用高效液體色譜分析法測定 |
(Milk and milk powder - Determination of aflatoxin M content - Clean-up by immunoaffinity chromatographie and determination by high-performance liquid chromatography (ISO 14501:1998); German version EN ISO 14501:1998) |
| DIN EN ISO 14509-2001 |
小型船舶.動力娛樂船發出的氣載噪聲的測定 |
(Small craft - Measurement of airborne sound emitted by powered recreational craft (ISO 14509:2000); German version EN ISO 14509:2000) |
| DIN EN ISO 14509/A1-2004 |
小艇.動力娛樂用艇發出的空氣噪音的測量.修改件1 |
|
| DIN EN ISO 14526-1-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999); German version EN ISO 14526-1:1999) |
| DIN EN ISO 14526-2-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999) |
| DIN EN ISO 14526-3-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999); German version EN ISO 14526-3:1999) |
| DIN EN ISO 14527-1-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999); German version EN ISO 14527-1:1999) |
| DIN EN ISO 14527-2-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999); German version EN ISO 14527-2:1999) |
| DIN EN ISO 14527-3-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第3部分:對所選的模塑化合物的要求 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14527-3:1999); German version EN ISO 14527-3:1999) |
| DIN EN ISO 14528-1-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14528-1:1999); German version EN ISO 14528-1:1999) |
| DIN EN ISO 14528-2-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999); German version EN ISO 14528-2:1999) |
| DIN EN ISO 14528-3-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999); German version EN ISO 14528-3:1999) |
| DIN EN ISO 14529-1-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14529-1:1999); German version EN ISO 14529-1:1999) |
| DIN EN ISO 14529-2-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999); German version EN ISO 14529-2:1999) |
| DIN EN ISO 14529-3-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14529-3:1999); German version EN ISO 14529-3:1999) |
| DIN EN ISO 14530-1-2000 |
塑料.非飽和聚酯粉末模塑化合物(UP-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14530-1:1999); German version EN ISO 14530-1:1999) |
| DIN EN ISO 14530-2-2000 |
塑料.非飽和聚酯粉末模塑化合物(UP-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999) |
| DIN EN ISO 14530-3-2000 |
塑料.非飽和聚酯粉末模塑化合物(UP-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999); German version EN ISO 14530-3:1999) |
| DIN EN ISO 14534-2002 |
眼科光學.接觸鏡片和接觸鏡片護理產品.基本要求 |
(Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2002); German version EN ISO 14534:2002) |
| DIN EN ISO 14539-2002 |
操作型工業機器人.用抓式鉗子進行物品傳遞.詞匯和特征表示 |
(Manipulating industrial robots - Object handling with grasp-type-grippers - Vocabulary and presentation of caracteristics (ISO 14539:2000); German version EN ISO 14539:2001) |
| DIN EN ISO 14554-1-2000 |
焊接質量要求.金屬材料的電阻焊接.第1部分:綜合質量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2000); German version EN ISO 14554-1:2000) |
| DIN EN ISO 14554-2-2000 |
焊接質量要求.金屬材料的電阻焊接.第2部分:基本質量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2000); German version EN ISO 14554-2:2000) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com