標準號 |
中文名稱 |
英文名稱 |
| BS EN 61188-5-2-2003 |
印制板及其組件.設計和使用.焊接(焊接區/接縫)的考慮.分立件 |
(Printed boards and assemblies - Design and use - Attachment (land/joint) considerations - Discrete components) |
| BS EN 61188-5-6-2003 |
印制板和組件.設計和使用.附件條件.四面帶有J形引線的片狀載體 |
(Printed boards and assemblies - Design and use - Attachment (land/joint) considerations - Chip carriers with J-leads on four sides) |
| BS EN 61189-1-1997 |
互連結構和附件用電氣材料的試驗方法.第1部分:一般試驗方法和方法論 |
(Test methods for electrical materials, printed boards and other interconnection structures and assemblies - General test methods and methodology) |
| BS EN 61189-2-1997 |
互連結構和附件用電氣材料的試驗方法.第2部分:互連結構用材料的試驗方法 |
(Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Test methods for materials for interconnection structures) |
| BS EN 61189-3-1997 |
互連結構和附件用電氣材料的試驗方法.第3部分:互連結構的試驗方法(印制電路) |
(Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Test methods for interconnection structures (printed boards)) |
| BS EN 61190-1-1-2002 |
電子組件用的附件材料.電子組件中的優質互連接器用軟焊釬助熔劑的要求 |
(Attachment materials for electronic assembly - Requirements for soldering fluxes for high-quality interconnections in electronics assembly) |
| BS EN 61190-1-2-2002 |
電子組件用的附件材料.電子組件中的優質互連接器用固體涂膠 |
(Attachment materials for electronic assembly - Requirements for solder pastes for high-quality interconnections in electronic assembly) |
| BS EN 61190-1-3-2002 |
電子組件用的附件材料.電子焊接設備用的電子分級焊料合金和助熔劑和非助熔劑的要求 |
(Attachment materials for electronic assembly - Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications) |
| BS EN 61191-1-1999 |
印刷電路板組件.總規范.使用表面安裝和相關裝配技術的焊接電氣和電子組件的要求 |
(Printed board assemblies - Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies) |
| BS EN 61191-2-1999 |
印刷電路板組件.分規范.表面安裝焊接組件的要求 |
(Printed board assemblies - Sectional specification - Requirements for surface mount soldered assemblies) |
| BS EN 61191-3-1999 |
印刷電路板組件.分規范.通孔安裝焊接組件的要求 |
(Printed board assemblies - Sectional specification - Requirements for through-hole mount soldered assemblies) |
| BS EN 61191-4-1999 |
印刷電路板組件.分規范.端點焊接組件的要求 |
(Printed board assemblies - Sectional specification - Requirements for terminal soldered assemblies) |
| BS EN 61192-1-2003 |
釬焊電子組件的工藝要求.總則 |
(Workmanship requirements for soldered electronic assemblies - General) |
| BS EN 61192-2-2003 |
釬焊電子組件的工藝要求.表面安裝組件 |
(Workmanship requirements for soldered electronic assemblies - Surface-mount assemblies) |
| BS EN 61192-3-2003 |
釬焊電子組件的工藝要求.通孔安裝組件 |
(Workmanship requirements for soldered electronic assemblies - Through-hole mount assemblies) |
| BS EN 61192-4-2003 |
釬焊電子組件的工藝要求.終端組件 |
(Workmanship requirements for soldered electronic assemblies - Terminal assemblies) |
| BS EN 61193-1-2002 |
質量評定體系.印制板裝配件的缺陷注冊和分析 |
(Quality assessment systems - Registration and analysis of defects on printed board assemblies) |
| BS EN 61194-1996 |
獨立式光電系統的特征參數 |
(Characteristic parameters of stand-alone photovoltaic (PV) systems) |
| BS EN 61195-2000 |
雙頭熒光燈.安全規范 |
(Double-capped fluorescent lamps - Safety specifications) |
| BS EN 61196-2-2003 |
射頻電纜.規范.聚四氟乙烯(PTFE)絕緣半硬射頻同軸電纜分規范 |
(Radio-frequency cables - Specifications - Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation) |
| BS EN 61196-3-1999 |
射頻電纜.規范.局域網用同軸電纜分規范 |
(Radio-frequency cables - Specifications - Sectional specification for coaxial cables for local area networks) |
| BS EN 61196-3-2-1998 |
射頻電纜.規范.水平地面線路數字通信用同軸電纜.工作半徑為185m,每秒通過字節最高達10Mb的局域網用帶固體電 |
(Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of) |
| BS EN 61196-3-3-1998 |
射頻電纜.規范.水平地面線路數字通信用同軸電纜.工作半徑為185m,每秒通過字節達10Mb的局域網用帶泡沫電介質 |
(Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks o) |
| BS EN 61196-4-2004 |
射頻電纜.規范.輻射電纜分規范 |
|
| BS EN 61196-4-2004 |
同軸通信電纜.輻射電纜分規范 |
|
| BS EN 61197-1996 |
絕緣油.火焰線性傳播.使用玻璃纖維的試驗方法 |
(Insulating liquids - Linear flame propagation - Test method using a glass-fibre tape) |
| BS EN 61198-1994 |
絕緣礦物油.2-糖和有關化合物的測定方法 |
(Mineral insulating oils - Methods for the determination of 2-furfural and related compounds) |
| BS EN 61199-2000 |
單頭熒光燈的安全規范 |
(Single-capped fluorescent lamps - Safety specifications) |
| BS EN 612-1996 |
金屬薄板制檐溝和雨水管.定義、分類和要求 |
(Eaves gutters and rainwater down-pipes of metal sheet - Definitions, classifications and requirements) |
| BS EN 61202-1-2000 |
光纖絕緣子.總規范 |
(Fibre optic isolators - Generic specification) |
| BS EN 61203-1995 |
電工用合成有機酯.設備中變壓器酯的維護指南 |
(Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment) |
| BS EN 61204-1995 |
直流輸出低壓供電裝置.特性和安全要求 |
(Low-voltage power supply devices, d.c. output - Performance characteristics and safety requirements) |
| BS EN 61204-3-2001 |
直流輸出低壓供電裝置.電磁兼容性(EMC) |
(Low voltage power supplies, d.c. output - Electromagnetic compatibility (EMC)) |
| BS EN 61204-6-2001 |
直流輸出低壓供電裝置.經過性能評定的低壓供電裝置的要求 |
(Low voltage power supplies, d.c. output - Requirements for low-voltage power supplies of assessed performance) |
| BS EN 61205-1994 |
超聲學規范.牙齒除垢裝置.產品性能說明及測試 |
(Specification for ultrasonics - Dental descaler systems - Measurement and declaration of the output characteristics) |
| BS EN 61206-1995 |
超聲.連續波多普勒系統的試驗程序 |
(Ultrasonics - Continuous-wave Doppler systems - Test procedures) |
| BS EN 61207-1-1994 |
氣體分析器的性能說明.第1部分:概述 |
(Expression of performance of gas analyzers - General) |
| BS EN 61207-2-1994 |
氣體分析器的性能說明.第2部分:氣體中的氧(利用高溫電化檢測器) |
(Expression of performance of gas analyzers - Oxygen in gas (utilizing high-temperature electrochemical sensors)) |
| BS EN 61207-3-2003 |
氣體分析器的性能說明.順磁氧氣分析器 |
(Expression of performance of gas analyzers - Paramagnetic oxygen analyzers) |
| BS EN 61207-6-1994 |
氣體分析儀的性能說明.第6部分:光度分析儀 |
(Expression of performance of gas analyzers - Photometric analyzers) |
| BS EN 61209-1999 |
海上導航和無線電通信設備和系統.集成橋系統(IBS).操作和性能要求及試驗方法和所要求的試驗結果 |
(Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results) |
| BS EN 61210-1995 |
連接裝置.銅電導體的扁型速接終端的安全要求 |
(Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements) |
| BS EN 61212-1-1996 |
電工用工業剛性圓熱固樹脂層壓管和棒材.總要求 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - General requirements) |
| BS EN 61212-2-1996 |
電工用工業剛性圓熱固樹脂層壓管和棒材.第2部分:試驗方法 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Methods of test) |
| BS EN 61212-3-1-1996 |
電工用工業剛性圓熱固樹脂層壓管和棒材.第3部分:專用材料規范.活頁1:圓層壓軋制管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated rolled tubes) |
| BS EN 61212-3-2-1996 |
電工用工業剛性圓熱固樹脂層壓管和棒材.第3部分:專用材料規范.活頁2:圓層壓壓制管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated moulded tubes) |
| BS EN 61212-3-3-1996 |
電工用工業剛性圓熱固樹脂層壓管和棒材.第3部分:專用材料規范.活頁3:圓層壓壓制桿 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated moulded rods) |
| BS EN 61213-1994 |
錄像帶上模擬聲音錄制.磁化極性 |
(Analogue audio recording on video tape - Polarity of magnetization) |
| BS EN 61215-1995 |
晶體硅地表光伏電池組件.設計質量和型式批準 |
(Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval) |
| BS EN 61217-1997 |
放射療法設備的坐標系、移動和刻度導則 |
(Guide to co-ordinates, movements and scales used for radiotherapy equipment) |
| BS EN 61219-1994 |
帶電作業.噴槍式短路裝置用的接地設備或接地輿短路設備 |
(Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - Lance earthing) |
| BS EN 61220-1995 |
超聲波學.場.頻率范圍0.5MHz-15MHz超聲波醫療設備含水聽診器引起的超聲場的特性和測量指南 |
(Ultrasonics - Fields - Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0.5 MHz to 15 MHz) |
| BS EN 61221-1996 |
石油產品及潤滑劑.三磷酸酯渦輪機控制液規范 |
(Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications) |
| BS EN 61221-2004 |
石油產品及潤滑劑.三芳基磷酸酯渦輪機控制液(ISO-L-TCD類).規范 |
|
| BS EN 61221-2004 |
石油產品及潤滑劑.三芳基磷酸酯渦輪機控制液(ISO-L-TCD類).規范 |
|
| BS EN 61223-2-4-1995 |
醫療圖像裝置常規試驗評定.恒定試驗.硬復制攝影機的試驗方法 |
(Evaluation and routine testing in medical imaging departments - Constancy tests - Method for hard copy cameras) |
| BS EN 61223-2-5-1995 |
醫療圖像裝置常規試驗評定.恒定試驗.圖像顯示裝置的試驗方法 |
(Evaluation and routine testing in medical imaging departments - Constancy tests - Method for image display devices) |
| BS EN 61223-2-6-1995 |
醫療圖像部門常規試驗和評定.恒定試驗.計算層析X射線攝影機的方法 |
(Evaluation and routine testing in medical imaging departments - Constancy tests - Method for X-ray equipment for computed tomography) |
| BS EN 61223-3-1-1999 |
醫院成像科的評定和常規試驗.驗收試驗.輻射照相和輻射顯微照相系統用X射線設備的成像性能 |
(Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of X-ray equipment for radiographic and radioscopic systems) |
| BS EN 61223-3-2-1997 |
醫療圖像裝置常規試驗評定.乳腺X射線設備的成像性能 |
(Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of mammographic X-ray equipment) |
| BS EN 61223-3-3-1997 |
醫療圖像裝置常規試驗評定.數字減法血管造影術(DSA)用X射線的成像性能 |
(Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiography (DSA)) |
| BS EN 61223-3-4-2000 |
醫療圖像部門常規試驗和評定.驗收試驗.牙科X射線設備的圖像性能 |
(Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of dental X-ray equipment) |
| BS EN 61223-3-5-2004 |
醫療成像部門的評價及常規試驗.驗收試驗.計算機斷層攝影X射線設備的成像性能 |
|
| BS EN 61223-3-5-2004 |
醫療成像部門的評價及例行試驗.驗收試驗.計算機斷層攝影X射線設備的成像性能 |
|
| BS EN 61223-3-5-2004 |
醫療成像部門的評價及例行試驗.驗收試驗 |
|
| BS EN 61228-1995 |
曬黑用紫外燈UV放射的測量方法 |
(Method of measuring and specifying the UV radiation of ultraviolet lamps used for sun-tanning) |
| BS EN 61229-1996 |
交流設備帶電作業用剛性保護罩 |
(Rigid protective covers for live working on a.c. installations) |
| BS EN 61230-1994 |
帶電作業.接地或接地短路用便攜式設備 |
(Live working - Portable equipment for earthing or earthing and short-circuiting) |
| BS EN 61232-1997 |
電氣用包鋁鋼絲線 |
(Aluminium-clad steel wires for electrical purposes) |
| BS EN 61234-1-1994 |
電絕緣材料水解穩定性的試驗方法.第1部分:塑料薄膜 |
(Method of test for hydrolytic stability of electrical insulating materials - Method of test for hydrolytic stability of electrical insulating materials - Plastic films) |
| BS EN 61234-2-1998 |
電絕緣材料水解穩定性的試驗方法.熱鑄模 |
(Method of test for hydrolytic stability of electrical insulating materials - Moulded thermosets) |
| BS EN 61235-1994 |
帶電作業.電工用絕緣空心管 |
(Live working - Insulating hollow tubes for electrical purposes) |
| BS EN 61236-1994 |
帶電作業用滑動座架、電桿夾及附件 |
(Saddles, pole clamps (stick clamps) and accessories for live working) |
| BS EN 61237-1-1995 |
廣播磁帶錄象機.測量方法.機械測量 |
(Broadcast video tape recorders - Methods of measurement - Mechanical measurements) |
| BS EN 61237-2-1995 |
廣播磁帶錄像機.測量方法.模擬復合視頻信號的電氣測量 |
(Broadcast video tape recorders - Methods of measurement - Electrical measurements of analogue composite video signals) |
| BS EN 61237-3-1995 |
廣播磁帶錄像機.測量方法.模擬部件視頻信號的電氣測量 |
(Broadcast video tape recorders - Methods of measurement - Electrical measurements for analogue component video signals) |
| BS EN 61237-4-1998 |
廣播磁帶錄像機.測量方法.第4部分:模擬音頻性能測量 |
(Broadcast video tape recorders - Methods of measurement - Analogue audio performance measurements) |
| BS EN 61238-1-2003 |
額定電壓為36KV(Um=42 kV)及以下的電力電纜用壓接和機械連接器.試驗方法和要求 |
(Compression and mechanical connectors for power cables for rated voltages up to 36 kV (UDOWNm = 42 kV) - Test methods and requirements) |
| BS EN 61240-1997 |
壓電裝置.頻率控制和選擇用表面安裝裝置框圖制備.總則 |
(Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules) |
| BS EN 61241-10-2004 |
有可燃性粉塵場合用電氣設備.可燃性粉塵所在區域的分類 |
|
| BS EN 61241-14-2004 |
有可燃性粉塵場所用電氣設備.選擇和安裝 |
|
| BS EN 61241-17-2005 |
可燃性粉塵環境中用電氣裝置.危險場所中(礦山除外)電氣裝置的檢驗和維修 |
|
| BS EN 61241-18-2004 |
有可燃性粉塵場所用電氣設備.封裝mD型防護設備 |
|
| BS EN 61241-2-2-1996 |
易燃灰塵場地中用電子設備.第2部分:試驗方法.第2節:灰塵層中電阻系數的測定方法 |
(Electrical apparatus for use in the presence of combustible dust - Test methods - Method for determining the electrical resistivity of dust in layers) |
| BS EN 61242-1998 |
電氣附件.家用和類似用途的電纜卷軸 |
(Electrical accessories - Cable reels for household and similar purposes) |
| BS EN 61243-1-1998 |
現場工作.電壓檢測器.第1部分:超過1kV的交流電壓用容電器類型 |
(Live working - Voltage detectors - Capacitive type to be used for voltages exceeding 1 kV a.c.) |
| BS EN 61243-1-2005 |
帶電作業.電壓檢測器.電壓超過交流1kV用電容型 |
|
| BS EN 61243-2-1998 |
帶電作業.電壓探測器.1kV-36kV交流電壓用電阻類型 |
(Live working - Voltage detectors - Resistive type to be used for voltages of 1 kV to 36 kV a.c.) |
| BS EN 61243-3-1999 |
帶電作業.電壓檢測器.兩極低壓型 |
(Live working - Voltage detectors - Two-pole low voltage type) |
| BS EN 61243-5-2001 |
帶電作業.電壓檢測器.電壓檢測系統(VDS) |
(Live working - Voltage detectors - Voltage detecting systems (VDS)) |
| BS EN 61247-1997 |
磁氧物和相伴部件制的PM芯.尺寸 |
(PM-cores made of magnetic oxides and associated parts - Dimensions) |
| BS EN 61248-1-1997 |
電子和電信設備用變壓器和電感器.第1部分:總規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Generic specification) |
| BS EN 61248-2-1997 |
電子和電信設備用變壓器和電感器.第2部分:在可能批準程序基礎上信號變壓器分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Sectional specification for signal transformers on the basis of the capability approval procedure) |
| BS EN 61248-3-1997 |
電子和電信設備用變壓器和電感器.第3部分:在可能批準程序基礎上電力變壓器分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Sectional specification for power transformers on the basis of the capability approval procedure) |
| BS EN 61248-4-1997 |
電子和電信設備用變壓器和電感器.第4部分:在可能批準程序基礎上轉換供電方式的電力變壓器分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability) |
| BS EN 61248-5-1997 |
電子和電信設備用變壓器和電感器.第5部分:在可能批準程序基礎上脈沖變壓器分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Sectional specification for pulse transformers on the basis of the capability approval procedure) |
| BS EN 61248-6-1997 |
電子和電信設備用變壓器和電感器.第6部分:在可能批準程序基礎上電感器分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Sectional specification for inductors on the basis of the capability approval procedure) |
| BS EN 61248-7-1998 |
電子和電信設備用變壓器和電感器.第7部分:以性能認證程序?yàn)榛A(chǔ)的高頻電感器和中頻變壓器分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Sectional specification for high-frequency inductors and intermediate transformers on the basis of the capability app) |
| BS EN 61249-2-1-2005 |
印制板和其它互連結構用材料.包被和非包被增強基材.酚醛纖維素紙?jiān)鰪?qiáng)銅包被經濟級疊層板 |
|
| BS EN 61249-2-10-2003 |
互連結構用材料.包被和非包被增強基材分規范.包被和非包被增強基材.規定了易燃性的包銅改良或未改良的氰酸 |
() |
| BS EN 61249-2-11-2004 |
互聯結構用材料.包被和非包被增強基材的分規范集.阻燃型(垂直燃燒試驗)銅包被的聚酰亞胺溴化環氧改良或非改良的編織E型玻璃纖維增強層壓板 |
|
| BS EN 61249-2-11-2004 |
互聯結構用材料.包被和非包被增強基材的分規范集.阻燃型(垂直燃燒試驗)銅包被的聚酰亞胺溴化環氧改良或非改良的編織E型玻璃纖維增強層壓板 |
|
| BS EN 61249-2-11-2004 |
印制板和其他互聯結構用材料.包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的聚酰亞胺溴化環氧改良或非改良的編織E型玻璃纖維增強層壓板 |
|
| BS EN 61249-2-12-1999 |
互聯結構材料.包被和非包被的加強基質材料的分規范.阻燃環氧衍生物疊層板材.銅包被 |
(Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of defined flammability, copper-clad) |
| BS EN 61249-2-13-1999 |
連接結構用材料.增強的涂覆和未涂覆材料分規范組.規定易燃性的銅涂覆氰酸鹽酯非織造芳族疊層板材 |
(Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Cyanate ester non-woven aramid laminate of defined flammability, copper-clad) |
| BS EN 61249-2-18-2002 |
互連結構用材料.包被和非包被增強基材分規范.規定了易燃性的覆銅非編織玻璃纖維增強層壓板(垂直燃燒試驗) |
(Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flammabilit) |
| BS EN 61249-2-19-2002 |
互連結構用材料.包被和非包被增強基材分規范.規定了易燃性的環氧交叉簾布層線性纖維玻璃增強包銅的疊層板( |
(Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined fla) |
| BS EN 61249-2-21-2004 |
互聯結構用材料.包被和非包被增強基材分規范集.阻燃型(垂直燃燒試驗)銅包被的非鹵化環氧編織E型玻璃纖維增強層壓板 |
|
| BS EN 61249-2-21-2004 |
互聯結構用材料.包被和非包被增強基材分規范集.阻燃型(垂直燃燒試驗)銅包被的非鹵化環氧編織E型玻璃纖維增強層壓板 |
|
| BS EN 61249-2-21-2004 |
印制板和其他互聯結構用材料.包被和非包被增強基材分規范集.阻燃型(垂直燃燒試驗)銅包被的非鹵化環氧編織E型玻璃纖維增強層壓板材 |
|
| BS EN 61249-2-22-2005 |
印制板和其他互連結構用材料.包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的改良的非鹵化環氧編織E型玻璃纖維層壓板 |
|
| BS EN 61249-2-23-2005 |
印制板和其他互連結構用材料.包被和非包被增強基材.銅包被的經濟級非鹵化酚醛纖維素紙?jiān)鰪?qiáng)層壓板 |
|
| BS EN 61249-2-26-2005 |
印制板和其他互連結構用材料.包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的非鹵化環氧非編織/編織E型玻璃纖維增強層壓板 |
|
| BS EN 61249-2-4-2002 |
互連結構用材料.包被和非包被增強基材分規范.規定了易燃性的覆銅聚酯非編織/編織玻璃纖維層壓板(垂直燃燒試 |
(Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (ve) |
| BS EN 61249-2-5-2004 |
印制板和其他互聯結構用材料.包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的溴化環氧纖維素紙?jiān)鰪?qiáng)芯/編織的E型玻璃纖維增強表面層壓板 |
|
| BS EN 61249-2-5-2004 |
互聯結構用材料.包被和非包被增強基材的分規范集.阻燃型(垂直燃燒試驗)銅包被的溴化環氧纖維素紙?jiān)鰪?qiáng)芯/編織的E型玻璃纖維增強表面層壓板 |
|
| BS EN 61249-2-5-2004 |
互聯結構用材料.包被和非包被增強基材的分規范集.阻燃型(垂直燃燒試驗)銅包被的溴化環氧纖維素紙?jiān)鰪?qiáng)芯/編織的E型玻璃纖維增強表面層壓板 |
|
| BS EN 61249-2-6-2004 |
印制板和其他互聯結構用材料.包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的溴化環氧非編織/編織的E型玻璃纖維增強層壓板 |
|
| BS EN 61249-2-6-2004 |
互聯結構用材料.包被和非包被增強基材分規范集.阻燃型(垂直燃燒試驗)銅包被的溴化環氧非編織/編織的E型玻璃纖維增強表面層壓板 |
|
| BS EN 61249-2-6-2004 |
互聯結構用材料.包被和非包被增強基材分規范集.阻燃型(垂直燃燒試驗)銅包被的溴化環氧非編織/編織的E型玻璃纖維增強層壓板 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com