標準號 |
中文名稱 |
英文名稱 |
| DIN EN 2545-3-1995 |
航空和航天.鈦和鈦合金制預制材料和鑄件.交貨技術條件.第3部分:試制鑄件和系列鑄件 |
(Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 3: Pre-productions and production castings; German version EN 2545-3:1995) |
| DIN EN 2546-1988 |
航空和航天.耐蝕鋼制徑向嚙合墊圈.尺寸 |
(Aerospace series; washers, lock with radial serrations in resisting steel; dimensions) |
| DIN EN 2547-1989 |
航空和航天.文獻縮微化.105mm縮微膠卷(縮微膠片A6) |
(Aerospace series; filming of documents; microfilm 105 mm (microfiche A6); german version EN 2547:1987) |
| DIN EN 2549-1995 |
航空和航天.MoS鍛造陽極氧化鈦合金制短螺紋六角緊配合螺栓.等級:1100MPa(室溫315℃) |
(Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 2549:1995) |
| DIN EN 255-1-1997 |
用電驅動壓縮機的空調,液體冷卻設備和熱力泵.暖氣.第1部分:名稱.定義.標志 |
(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 1: Terms, definitions and designations; German version EN 255-1:1997) |
| DIN EN 255-2-1997 |
用電驅動壓縮機的空調,液體冷卻設備和熱力泵.暖氣.第2部分:室內暖氣用設備標志的檢驗和要求 |
(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 2: Testing and requirements for marking for space heating units; German version EN 255-2:1997) |
| DIN EN 255-3-1997 |
用電驅動壓縮機的空調,液體冷卻設備和熱力泵.暖氣.第3部分:工業用水加熱用設備標志的檢驗和要求 |
(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units (includes corrigendum AC:1997); German version 255-3:1997 + AC:1997) |
| DIN EN 255-4-1997 |
用電驅動壓縮機的空調,液體冷卻設備和熱力泵.暖氣.第4部分:工業用水加熱及室內暖氣用設備的要求 |
(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 4: Requirements for space heating and sanitary hot water units; German version EN 255-4:1997) |
| DIN EN 2550-1993 |
航空和航天.英寸系列1050A鋁100°普通沉頭實心鉚釘 |
(Aerospace series; rivets, solid, 100 normal countersunk head, in aluminium 1050A, inch based series; german version EN 2550:1992) |
| DIN EN 2551-1993 |
航空和航天.英寸系列2117A鋁合金拱頂100°普通沉頭實心鉚釘 |
(Aerospace series; rivets, solid, 100 normal countersunk head with dome, in aluminium alloy 2117, inch based series; german version EN 2551:1992) |
| DIN EN 2552-1993 |
航空和航天.英寸系列2117A鋁合金拱頂100°普通沉頭實心鉚釘 |
(Aerospace series; rivets, solid, 100 normal countersunk head with dome, in aluminium alloy 2117, anodised or chromated, inch based series; german version EN 2552:1992) |
| DIN EN 2553-1993 |
航空和航天.英寸系列2017A鋁合金拱頂100°普通沉頭實心鉚釘 |
(Aerospace series; rivets, solid, 100 normal countersunk head with dome, in aluminium alloy 2017A, inch based series; german version EN 2553:1992) |
| DIN EN 2555-1993 |
航空和航天.英寸系列5056A鋁合金拱頂100°普通沉頭實心鉚釘 |
(Aerospace series; rivets, solid, 100 normal countersunk head with dome, in aluminium alloy 5056A, inch based series; german version EN 2555:1992) |
| DIN EN 2556-1993 |
航空航天.5056A鉛合金制陽性鉻酸鈍化帶拱頂100度標準沉頭實心鉚釘 |
(Aerospace series; rivets, solid, 100 normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series; German version EN 2556:1992) |
| DIN EN 2557-1997 |
航空和航天.碳素纖維預浸帶.單位面積質量的測定 |
(Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area; German version EN 2557:1997) |
| DIN EN 2558-1997 |
航空和航天.碳化纖維預浸漬體.易揮發成份測定 |
(Aerospace series - Carbon fibre preimpregnates - Determination of the volatile content; German version EN 2558:1997) |
| DIN EN 25580-1992 |
無損檢驗.工業射線照像觀測儀.最低要求 |
(Non-destructive testing; industrial radiographic illuminators; minimum requirements (ISO 5580:1985); german version EN 25580:1992) |
| DIN EN 2559-1997 |
航空和航天.碳素纖維預浸帶.樹脂成份,纖維成份以及單位面積纖維質量的測定 |
(Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German version EN 2559:1997) |
| DIN EN 2560-1998 |
航空和航天.碳纖維預浸漬.樹脂流測定 |
(Aerospace series - Carbon fibre preimpregnates - Determmination of the resin flow; German version EN 2560:1998) |
| DIN EN 2561-1995 |
航空和航天.碳素纖維增強塑料.單向塑料層壓制品.纖維方向平行抗拉試驗 |
(Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction; German version EN 2561:1995) |
| DIN EN 2562-1997 |
航空和航天.碳素纖維增強塑料.單向?qū)訅核芰?與纖維方向平行的彎曲試驗 |
(Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; flexural test parallel to the fibre direction; German version EN 2562:1997) |
| DIN EN 2563-1997 |
航空和航天.碳化纖維增強塑料.單向?qū)訅褐破?表觀層壓間抗切強度測定 |
(Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; determination of apparent interlaminar shear strength; German version EN 2563:1997) |
| DIN EN 2564-1998 |
航空和航天.碳纖維層壓塑料.纖維成份,樹脂成份和氣孔成份的測定 |
(Aerospace series - Carbon fibre laminates - Determination of the fibre-, resin- and void contents; German version EN 2564:1998) |
| DIN EN 25651-1993 |
紙、紙板和紙漿.性能表示單位 |
(Paper, board and pulps; units for expressing properties (ISO 5651:1989); German version EN 25651:1993) |
| DIN EN 25652-1992 |
信息加工.信息交換用9磁道12.7mm(0.5英時)磁帶.帶246字符/mm(6250字符/英時)GCR方法的格式和記錄 |
(Information processing; 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange; format and recording, using group coding at 246 cpmm (6250 cpi) (ISO 5652:1984); english version EN 25652:1991) |
| DIN EN 25663-1993 |
水質.氮的基耶達(Kjeldahl)測定法.加硒礦化作用后的方法 |
(Water quality; determination of Kjeldahl nitrogen; method after mineralization with selenium (ISO 5663:1984); German version EN 25663:1993) |
| DIN EN 25667-1-1993 |
水質.取樣.第1部分:取樣程序設計指南 |
(Water quality; sampling; part 1: guidance on the design of sampling programmes (ISO 5667-1:1980); German version EN 25667-1:1993) |
| DIN EN 25667-2-1993 |
水質.取樣.第2部分:取樣技術導則 |
(Water quality; sampling; part 2: guidance on sampling techniques (ISO 5667-2:1991); German version EN 25667-2:1993) |
| DIN EN 2569-1992 |
航空和航天.操縱用鋼絲繩的接頭和鎖扣.交貨技術條件 |
(Aerospace series; control cable fittings and turnbarrels; technical specification; german version EN 2569:1991) |
| DIN EN 257-1996 |
煤氣燃燒用機械溫度調節器 |
(Mechanical thermostats for gas burning appliances; German version EN 257:1992 + A1:1996) |
| DIN EN 2570-1996 |
航空和航天.鎳鎘電池.交貨技術條件 |
(Aerospace series - Nickel-cadmium batteries - Technical specification; German version EN 2570:1996) |
| DIN EN 2574-1991 |
航空和航天.焊縫.圖紙上的說明 |
(Aerospace series; welds; information on drawings) |
| DIN EN 2575-1989 |
航空和航天.文獻縮微.縮微膠片16mm |
(Aerospace series; filming of documents; 16 mm microfilm; german version EN 2575:1988) |
| DIN EN 25813-1993 |
水質.溶解氧的測定.碘量法 |
(Water quality; determination of dissolved oxygen; iodometric method (ISO 5813:1983); german version EN 25813:1992) |
| DIN EN 25814-1992 |
水質.溶解氧的測定.電化法 |
(Water quality; determination of dissolved oxygen by the electrochemical probe method (ISO 5814:1990); german version EN 25814:1992) |
| DIN EN 25822-1992 |
點焊設備.錐度塞規和錐度環規(ISO5822-88) |
(Spot welding equipment; taper plug gauges and taper ring gauges (ISO 5822:1988); german version EN 25822:1991) |
| DIN EN 2583-1997 |
航空和航天.耐高溫鎳基合金(因科鎳合金718)制MJ螺紋的螺絲.等級:1275MPa(室溫下)/650℃.交貨技術條件 |
(Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 C; technical specification; German version EN 2583:1997) |
| DIN EN 2584-2002 |
航空和航天系列.帶自動潤滑層的耐腐蝕鋼制球面滑動軸承.在室溫下高負荷、窄系列.尺寸和負載 |
(Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series; Elevated loads at ambient temperature; Dimensions and loads; German version EN 2584:2001) |
| DIN EN 2585-1992 |
航空和航天.室溫條件下高負荷、寬系列、帶自動潤滑層的耐蝕鋼關節軸承.尺寸和負載 |
(Aerospace series; bearings, spherical plain in corrosion resisting steel with self-lubricating liner, wide series, elevated loads at ambient temperature; dimensions and loads; german version EN 2585:1992) |
| DIN EN 2586-1991 |
航空和航天.操作直桿用鎖緊墊圈.尺寸 |
(Aerospace series; washers, lock, for flight control rods; dimensions; german version EN 2586:1991) |
| DIN EN 2587-1991 |
航空和航天.可調帶螺桿柄的雙叉頭.尺寸及負載 |
(Aerospace series; rod ends, adjustable double fork and threaded shank; dimensions and loads) |
| DIN EN 2588-1988 |
航空和航天.帶導槽的耐蝕鋼制關節軸承.尺寸和負荷 |
(Aerospace series; bearings-spherical plain in corrosion resisting steel with assembly slot; dimensions and loads) |
| DIN EN 259-1-2001 |
卷式墻面飾層.高強度墻面飾層.第1部分:規范 |
(Wall coverings in roll form - Heavy duty wallcoverings - Part 1: Specifications; German version EN 259-1:2001) |
| DIN EN 259-2-2001 |
卷式墻面飾層.高強度墻面飾層.第2部分:耐沖擊性測定 |
(Wall coverings in roll form - Heavy duty wallcoverings - Part 2: Determination of impact resistance; German version EN 259-2:2001) |
| DIN EN 2591-101-1994 |
航空和航天.電器和光學儀器連接件.檢驗方法.第101部分:抽檢 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 101: Visual examination; German version EN 2591-101:1994) |
| DIN EN 2591-102-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第102部分:尺寸和質量檢驗 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 102: Examination of dimensions and mass; German version EN 2591-102:1996) |
| DIN EN 2591-1992 |
航空和航天.電器和光學儀器連接件.檢驗方法.通則 |
(Aerospace series; elements of electrical and optical connection; test methods; general; german version EN 2591:1992) |
| DIN EN 2591-201-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第201部分:弱電區中接觸電阻 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 201: Contact resistance, low level; German version EN 2591-201:1996) |
| DIN EN 2591-202-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第202部分:額定電流下的接觸電阻 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 202: Contact resistance at rated current; German version EN 2591-202:1996) |
| DIN EN 2591-203-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第203部分:微伏區中連續電流通量 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 203: Electrical continuity at microvolt level; German version EN 2591-203:1996) |
| DIN EN 2591-204-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第204部分:微秒?yún)^(qū)中接觸中斷 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 204: Discontinuity of contacts in the microsecond range; German version EN 2591-204:1996) |
| DIN EN 2591-205-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第205部分:外殼的連續電流通量 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 205: Housing (shell) electrical continuity; German version EN 2591-205:1996) |
| DIN EN 2591-206-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第206部分:絕緣電阻的測量 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 206: Measurement of insulation resistance; German version EN 2591-206:1996) |
| DIN EN 2591-207-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第207部分:耐電壓強度 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 207: Voltage proof test; German version EN 2591-207:1996) |
| DIN EN 2591-208-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第208部分:額定電流下的升溫 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 208: Temperature rise due to rated current; German version EN 2591-208:1996) |
| DIN EN 2591-209-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第209部分:電流溫度負載降低值測定 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 209: Current temperature derating; German version EN 2591-209:1996) |
| DIN EN 2591-210-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第210部分:電超載 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 210: Electrical overload; German version EN 2591-210:1998) |
| DIN EN 2591-211-2003 |
航空航天系列.光電連接件.試驗方法.第211部分:電容量 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 211: Capacitance; German and English version EN 2591-211:2002) |
| DIN EN 2591-213-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第213部分:從100MHz至1GHz之間的屏蔽作用 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz; German version EN 2591-213:1997) |
| DIN EN 2591-216-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第216部分:觸點滲透深度 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 216: Engagement depth of contacts; German version EN 2591-216:1997) |
| DIN EN 2591-217-2003 |
航空航天系列.光電連接件.試驗方法.第217部分:終端接線片和連機連接用在規定電流下的電壓降 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 217: Voltage drop under specified current for terminal lugs and in-line splices; German and English version EN 2591-217:2002) |
| DIN EN 2591-218-2003 |
航空航天系列.光電連接件.試驗方法.第218部分:用溫度和電流循環法試驗終端接線片和連機連接的老化程度 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling; German and English version EN 2591-218:2002) |
| DIN EN 2591-219-2003 |
航空航天系列.光電連接件.試驗方法.第219部分:絕緣終端接線片和連機連接的電壓強度 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 219: Voltage strength for insulated terminal lugs and in-line splices; German and English version EN 2591-219:2002) |
| DIN EN 2591-301-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第301部分:耐溫性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 301: Endurance at temperature; German version EN 2591-301:1996) |
| DIN EN 2591-302-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第302部分:氣候序列 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 302: Climatic sequence; German version EN 2591-302:1997) |
| DIN EN 2591-303-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第303部分:冷卻/低氣壓和濕熱 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 303: Cold/low pressure and damp heat; German version EN 2591-303:1997) |
| DIN EN 2591-304-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第304部分:濕熱條件下的耐久試驗 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 304: Damp heat steady state; German version EN 2591-304:1997) |
| DIN EN 2591-305-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第305部分:快速溫度變化 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 305: Rapid change of temperature; German version EN 2591-305:1997) |
| DIN EN 2591-306-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第306部分:長霉 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 306: Mould growth; German version EN 2591-306:1998) |
| DIN EN 2591-307-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第307部分:鹽霧 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 307: Salt mist; German version EN 2591-307:1998) |
| DIN EN 2591-308-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第308部分:沙子和灰塵 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 308: Sand and dust; German version EN 2591-308:1998) |
| DIN EN 2591-309-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第309部分:干熱 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 309: Dry heat; German version EN 2591-309:1997) |
| DIN EN 2591-310-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第310部分:冷凍 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 310: Cold; German version EN 2591-310:1998) |
| DIN EN 2591-311-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第311部分:低氣壓 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 311: Low air pressure; German version EN 2591-311:1997) |
| DIN EN 2591-312-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第312部分:氣密性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 312: Air leakage; German version EN 2591-312:1997) |
| DIN EN 2591-313-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第313部分:人工降雨 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 313: Artificial rain; German version EN 2591-313:1997) |
| DIN EN 2591-314-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第314部分:低壓下的浸漬 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 314: Immersion at low air pressure; German version EN 2591-314:1997) |
| DIN EN 2591-315-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第315部分:液體阻力 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 315: Fluid resistance; German version EN 2591-315:1998) |
| DIN EN 2591-316-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第316部分:抗臭氧性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 316: Ozone resistance; German version EN 2591-316:1997) |
| DIN EN 2591-317-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第317部分:非易燃性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 317: Flammability; German version EN 2591-317:1998) |
| DIN EN 2591-318-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第318部分:耐火性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 318: Fire-resistance; German version EN 2591-318:1998) |
| DIN EN 2591-319-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第319部分:氣封和無焊纏繞連接 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 319: Gastightness of solderless wrapped connections; German version EN 2591-319:1997) |
| DIN EN 2591-320-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第320部分:對土地的人工陽光照射 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 320: Simulated solar radiation at ground level; German version EN 2591-320:1997) |
| DIN EN 2591-321-1997 |
航空和航天.電器和光學儀器連接件.檢驗方法.第321部分:濕熱同期檢驗 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 321: Damp heat, cyclic test; German version EN 2591-321:1997) |
| DIN EN 2591-322-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第322部分:密封性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity; German version EN 2591-322:1998) |
| DIN EN 2591-323-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第323部分:熱沖擊 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 323: Thermal shock; German version EN 2591-323:1998) |
| DIN EN 2591-324-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第324部分:端面密度 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 324: Interfacial sealing; German version EN 2591-315:1998) |
| DIN EN 2591-325-2003 |
航空航天系列.光電連接件.試驗方法.第325部分:耐冰凍 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 325: Ice resistance; German and English version EN 2591-325:2002) |
| DIN EN 2591-401-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第401部分:恒定加速 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 401: Acceleration, steady state; German version EN 2591-401:1996) |
| DIN EN 2591-402-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第402部分:沖擊 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 402: Shock; German version EN 2591-402:1998) |
| DIN EN 2591-403-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第403部分:正弦振動和噪聲振動 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 403: Sinusoidal and random vibration; German version EN 2591-403:1998) |
| DIN EN 2591-404-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第404部分:橫向力 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 404: Transverse load; German version EN 2591-404:1998) |
| DIN EN 2591-405-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第405部分:軸向力 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 405: Axial load; German version EN 2591-405:1998) |
| DIN EN 2591-406-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第406部分:機械壽命 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 406: Mechanical endurance; German version EN 2591-406:1998) |
| DIN EN 2591-407-1999 |
航空和航天.電器和光學儀器連接件.檢驗方法.第407部分:觸點夾持和密封的穩定性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 407: Durability of contact retention system and seals; German version EN 2591-407:1999) |
| DIN EN 2591-408-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第408部分:接合力和斷開力 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 408: Mating and unmating forces; German version EN 2591-408:1998) |
| DIN EN 2591-409-1999 |
航空和航天.電器和光學儀器連接件.檢驗方法.第409部分:接觸插接件中觸點的緊密固定 |
(Aerospace series -Elements of electrical and optical connection; test methods - Part 409: Contact retention in insert; German version EN 2591-409:1999) |
| DIN EN 2591-410-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第410部分:殼體中觸點插件的固定 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 410: Insert retention in housing (axial); German version EN 2591-410:1998) |
| DIN EN 2591-411-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第411部分:殼體中觸點插件的扭轉保持性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 411: Insert retention in housing (torsional); German version EN 2591-411:1998) |
| DIN EN 2591-412-1999 |
航空和航天.電器和光學儀器連接件.檢驗方法.第412部分:觸點的插接力和拉力 |
(Aerospace series -Elements of electrical and optical connection; test methods - Part 412: Contact insertion and extraction forces; German version EN 2591-412:1999) |
| DIN EN 2591-413-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第413部分:彈簧接地裝置的保持力 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 413: Holding force of grounding spring system; German version EN 2591-413:1998) |
| DIN EN 2591-414-1998 |
航空和航天.電器和光學儀器連接件.檢驗方法.第414部分:帶電纜饋線斷開裝置的插接件的分離 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 414: Unmating of lanyard release connectors; German version EN 2591-414:1998) |
| DIN EN 2591-415-2002 |
航空和航天系列.電氣和光學連接件.檢驗方法.第415部分:檢驗探測器損害情況(塞孔接點) |
(Aerospace series - Elements of electrical and optical connections; Test methods - Part 415: Test probe damage (female contacts); German and English version EN 2591-415:2001) |
| DIN EN 2591-416-2002 |
航空和航天系列.電氣和光學連接件.檢驗方法.第416部分:觸點抗彎強度 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 416: Contact bending strength; German and English version EN 2591-416:2001) |
| DIN EN 2591-417-2002 |
航空和航天系列.電氣和光學連接件.檢驗方法.第417部分:抗拉強度(壓合連接) |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 417: Tensile strength (crimped connection); German and English version EN 2591-417:2001) |
| DIN EN 2591-418-2002 |
航空和航天系列.電氣和光學連接件.檢驗方法.第418部分:量規插入和拔出力(塞孔接點) |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 418: Gauge insertion/extraction forces (female contacts); German and English version EN 2591-418:2001) |
| DIN EN 2591-419-2002 |
航空和航天系列.電氣和光學連接件.檢驗方法.第419部分:插入物中插塞接點穩定性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 419: Stability of male contacts in insert; German and English version EN 2591-419:2001) |
| DIN EN 2591-420-2002 |
航空和航天系列.電氣和光學連接件.檢驗方法.第420部分:后部附件的機械強度 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 420: Mechanical strength of rear accessories; German and English version EN 2591-420:2001) |
| DIN EN 2591-421-2003 |
航空航天系列.光電連接件.試驗方法.第421部分:自由降落 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 421: Free fall; German and English version EN 2591-421:2002) |
| DIN EN 2591-422-2003 |
航空航天系列.光電連接件.試驗方法.第422部分:鎖線孔強度 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 422: Locking wire hole strength; German and English version EN 2591-422:2002) |
| DIN EN 2591-424-2002 |
航空航天系列.電氣和光學連接件的試驗方法.第424部分:無釬焊纏繞連接件的剝離力 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 424: Stripping force, solderless wrapped connections; German and English version EN 2591-424:2001) |
| DIN EN 2591-425-2002 |
航空和航天系列.電氣和光學連接件.檢驗方法.第425部分:無釬焊纏繞連接的非纏繞性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 425: Unwrapping capability, solderless wrapped connections; German and English version EN 2591-425:2001) |
| DIN EN 2591-426-2002 |
航空和航天系列.電氣和光學連接件.檢驗方法.第426部分:觸點保持系統的有效性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 426: Contact retention system effectiveness; German and English version EN 2591-426:2001) |
| DIN EN 2591-427-2002 |
航空和航天系列.電氣和光學連接件.檢驗方法.第427部分:防護罩附件的堅固性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 427: Robustness of protective cover attachment; German and English version EN 2591-427:2001) |
| DIN EN 2591-428-2003 |
航空航天系列.光電連接件.試驗方法.第428部分:有波紋的終端接線片電流通過時的正弦振動 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs; German and English version EN 2591-428:2002) |
| DIN EN 2591-501-2003 |
航空航天系列.光電連接件.試驗方法.第501部分:軟釬焊性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 501: Soft solderability; German and English version EN 2591-501:2002) |
| DIN EN 2591-502-2002 |
航空和航天系列.電氣和光學連接件.檢驗方法.第502部分:束口 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 502: Restricted entry; German and English version EN 2591-502:2001) |
| DIN EN 2591-503-2002 |
航空和航天系列.電氣和光學連接件.檢驗方法.第503部分:壓合后觸點變形 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 503: Contact deformation after crimping; German and English version EN 2591-503:2001) |
| DIN EN 2591-505-2002 |
航空和航天系列.電氣和光學連接件.檢驗方法.第505部分:觸點防護有效性(防碰擦) |
(Aeospace series - Elements of electrical and optical connection; Test methods - Part 505: Contact protection effectiveness (scoop-proof); German and English version EN 2591-505:2001) |
| DIN EN 2591-506-2002 |
航空和航天系列.電氣和光學連接件.檢驗方法.第506部分:工具的使用 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 506: Use of tools; German and English version EN 2591-506:2001) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com