標準號 |
中文名稱 |
英文名稱 |
| prEN 6047-002-2001 |
航空航天系列耐燃和持續攝氏200度大電流運行的螺紋式環行連接的電連接器第002部分：連接排列和性能規范 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, for high current, operating temperature + 200℃ continuous, and fire resistant - Part 002: Specification of performance and contact arrangements |
| prEN 6047-003-2001 |
航空航天系列 耐燃和持續攝氏200度大電流運行溫度的螺紋式環形連接的電連接器第003部分：方形法蘭插座 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, for high current, operating temperature + 200℃ continuous, and fire resistant - Part 003: Square flange receptacle; Product standard |
| prEN 60489-2-1992 |
移動業務中用的無線電設備的測量方法 第2部分：采用A3E、F3E或G3E發射的發射機 草案 |
Methods of measurement for radio equipment used in the mobile services; part 2: transmitters employing A3E, F3E or G3E emissions (IEC 60489-2:1991) |
| prEN 60489-4-1992 |
移動業務中用的無線電設備的測量方法 第4部分：采用單邊帶發射（R3E、H3E或J3E）的發射機草案 |
Methods of measurement for radio equipment used in the mobile services; part 4: transmitters employing single-sideband emissions (R3E, H3E or J3E) (IEC 60489-4:1991) |
| prEN 6049-001-2001 |
航空航天系列設備電纜偏聚酸胺纖維保護套第001部分：技術規范 |
Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 001: Technical specification |
| prEN 6049-006-2001 |
航空航天系列設備電纜偏聚酸胺纖維保護套第006部分：自動包裝保護套易彎曲接線端裝置產品標準 |
Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation; Product standard |
| prEN 6050-2001 |
航空航天系列 7050鋁合金化學薄膜的剪型沖模鎖緊緊公差的100度埋頭的軋制銷 英制系列 |
Aerospace series - Pins, close tolerance, swage locking, 100?countersunk head reduced, shear type, in aluminium alloy 7050, chemical film - Inch series |
| prEN 6051-2001 |
航空航天系列3003鋁合金化學薄膜剪型沖模鎖緊卡圈 英制系列 |
Aerospace series - Collars, swage locking, shear type, in aluminium alloy 3003, chemical film - Inch series |
| prEN 60512-10-4-2003 |
電子設備用連接器試驗和測量第10部分：撞擊試驗（自由件）靜負荷試驗（固定件）壽命試驗和過負荷試 |
IEC 60512-10-4, Ed. 2: Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests; Test 10d: Electrical overload (connectors) |
| prEN 60512-11-14-2003 |
電子設備用連接器試驗和測量第11-14部分：氣候試驗試驗11p：一種流動氣體的腐蝕試驗 |
Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests; Test 11p: Flowing single gas corrosion test |
| prEN 60512-25-5-2001 |
電子設備用連接器試驗和測量第25－5部分：試驗25e回波損耗草案 |
IEC 60512-25-5: Connectors for electronic equipment - Basic tests and measurements - Part 25-5: Test 25e; Return loss |
| prEN 60519-1-2003 |
電器設備的安全第１部分：一般要求草案 |
Safety in electroheat installations - Part 1: General requirements |
| prEN 60534-4-1998 |
工業過程控制閥第４部分：檢驗和常規試驗草案 |
IEC 60534-4: Industrial-process control valves - Part 4: Inspection and routine testing |
| prEN 6054-2001 |
航空航天系列6061鋁合金化學薄膜剪型沖模鎖緊卡圈 英制系列 |
Aerospace series - Collars, swage locking, shear type, in aluminium alloy 6061, chemical film - Inch series |
| prEN 60571-1997 |
鐵路車輛用點子設備 |
IEC 60571: Electronic equipment used on rail vehicles |
| prEN 6059-100-2001 |
航空航天系列 設備電纜保護套試驗方法第100部分：總則 |
Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 100: General |
| prEN 6059-303-2001 |
航空航天系列 設備電纜保護套試驗方法第303部分：耐流體性 |
Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 303: Resistance to fluids |
| prEN 6059-406-2001 |
航空航天系列設備電纜保護套試驗方法第406部分：振動 |
Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 406: Vibration |
| prEN 60598-1-2003 |
燈具第1部分：一般要求和試驗 建議Ａ－ＨＨ草案 |
IEC 60598-1, Ed. 6: Luminaires - Part 1: General requirements and tests |
| prEN 606-1999 |
條碼 鋼制品用運輸和處理標簽 |
Bar coding - Transport and handling labels for steel products |
| prEN 60601-1-2002 |
醫用電氣設備第1部分：安全通用要求和主要特性草案 |
IEC 60601-1, Ed. 3: Medical electrical equipment - Part 1: General requirements for safety and essential performance |
| prEN 60601-1-8-2003 |
醫院電氣設備第1部分：安全通用要求第8節：并列標準 報警系統要求 試驗和指南 醫療電子和電氣 |
Medical electrical equipment - Part 1-8: General requirements for safety; Collateral standard: Alarm systems; General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
| prEN 60603-7-3-1998 |
用于印制電路板的3MHz以下頻率連接器 第7－３部分 |
IEC 60603-7: Inclusion of shield mating in IEC 60603-7 |
| prEN 60603-7-4-2003 |
電氣設備接頭第7-4部分：用于數據傳輸頻率高達 250 MHz (第 6類, 未屏蔽)的8道活動和固定接頭的技術規范 |
IEC 60603-7-4, Ed. 1.0: Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
| prEN 60614-2-7-1995 |
電氣裝置用導管規范第２部分：導管的特殊規范第７節：無螺紋鋁合金剛性導管 |
Draft IEC 614-2-7: Conduits for electrical installations - Specification - Part 2: Particular specifications for conduits - Section 7: Rigid non-threadable conduits of aluminium alloy |
| prEN 60616-1/prA1-1996 |
電氣絕緣用柔軟復合材料第1部分：定義和一般要求修改草案１ |
Draft amendment 1 to IEC 626-1: Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements |
| prEN 60641-2-2002 |
電工用壓紙板和薄紙板規范板第２部分：試驗方法 |
IEC 60641-2, Ed. 2: Pressboard and presspaper for electrical purposes - Part 2: Methods of test |
| prEN 60669-2-1-2002 |
家用和類似電氣設備用開關第２部分：特殊要求第１節：電子開關 （草案） |
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements; Electronic switches (IEC 60669-2-1:200X - (23B/668/FDIS), modified) |
| prEN 60669-2-4-2002 |
家用和類似用途的固定電器設備開關第2-4部分：特殊要求阻斷開關 |
Switches for household and similar fixed-electrical installations - Part 2-4: Particular requirements; Isolating switches |
| prEN 6067-2000 |
航空航天系列快釋自保持正鎖雙動軸銷按扣操縱 |
Aerospace series - Pin, quick release, self-retaining, positive locking, double acting - Button handle |
| prEN 6068-2000 |
航空航天系列快釋自保持正鎖單動軸銷按扣操縱 |
Aerospace series - Pin, quick release, self-retaining, positive locking, single acting - Button handle |
| prEN 60684-3-214-2000 |
絕緣軟套管第3部分：各種型號軟管規范活頁214：熱縮聚烯烴軟管不阻燃收縮比3：1厚壁和中厚壁 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1; Thick and medium wall |
| prEN 60684-3-216-2000 |
絕緣軟套管第3部分：各種型號軟管規范活頁216：熱縮阻燃有限著火危險軟管 |
IEC 60684-3-216: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 216: Heat-shrinkable, flame-retarded, limited fire hazard sleeving |
| prEN 6069-2001 |
航空航天系列緊公差100度軋制平頭鉚釘 英制系列 |
Aerospace series - Rivet, 100?reduced flush head, close tolerance - Inch series |
| prEN 60695-2-1-1992 |
著火危險試驗2部分：試驗方法第1節：熱燈絲試驗和指南 |
Fire hazard testing; part 2: test methods; section 1: glow-wire test and guidance (IEC 60695-2-1:1991) |
| prEN 60695-2-3-1995 |
著火危險試驗第2部分：試驗方法第3節：用發熱器不良連接試驗 |
Fire hazard testing - Part 2: Test methods - Bad-connection test with heaters (IEC 60695-2-3:1984) |
| prEN 6070-1998 |
航空航天系列鋁和鋁合金鍛件技術規范通用要求 |
Aerospace series - Aluminium and aluminium alloy - Wrought products - Technical specification - General requirements |
| prEN 60704-2-6-2003 |
測定家用和類似用途電器輻射氣載噪聲的試驗規范第2－6部分：滾筒式干衣機的特殊要求 草案 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers (IEC 60704-2-6:2003, modified) / Note: Intended as replacement for EN 60704-2-6 (1995-01). |
| prEN 6071-1998 |
航空航天系列鋁和鋁合金鍛件技術規范中厚板 |
Aerospace series - Aluminium and aluminium alloy - Wrought products - Technical specification - Plate |
| prEN 6072-1998 |
航空航天系列金屬材料試驗方法恒振幅疲勞試驗 |
Aerospace series - Metallic materials - Test methods - Constant amplitude fatique testing |
| prEN 60721-2-8-1993 |
環境條件分級第2部分：自然界出現的環境條件第8節：火輻射 |
Draft IEC 60721: classification of environmental conditions; part 2: environmental conditions appearing in nature; section 8: fire exposure |
| prEN 60728-6-2003 |
電視信號的電纜網絡聲音信號交互服務第６部分：光學裝置 |
IEC 60728-6: Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
| prEN 6073-1998 |
航空航天系列金屬材料鋁和鋁合金試驗方法沖擊試驗 |
Aerospace series - Metallic materials - Aluminium and aluminium alloys - Test methods - Drop test |
| prEN 6074-1998 |
航空航天系列金屬材料試驗方法材料鑒定的統計數據 |
Aerospace series - Metallic materials - Test methods - Statistical data for material qualification |
| prEN 60745-2-12-2002 |
手持式電動工具的安全第２－１２部分：混凝土震動器的特殊要求草案 |
IEC 60745-2-12, Ed. 2: Safety of hand-held motor-operated electric tools - Part 2-12: Particular requirements for concrete vibrators |
| prEN 60745-2-18-2003 |
手持式電動工具的安全第２－１８部分：打包工具的特殊要求草案 |
Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools (IEC 60745-2-18:2003, modified) |
| prEN 60745-2-19-2002 |
手持式電動工具的安全第２－１９部分：長刨的特殊要求草案 |
Safety of hand-held motor-operated electric tools - Part 2-19: Particular requirements for jointers |
| prEN 60745-2-21-2001 |
手持式電動工具的安全第２－２１部分：排水溝清理機的特殊要求草案 |
IEC 60745-2-21, Ed. 1.0: Safety of hand-held motor-operated electric tools - Part 2-21: Particular requirements for drain cleaners |
| prEN 60749-26-2003 |
半導體器件機械和氣候試驗方法 第26部分： |
IEC 60749-26, Ed. 1: Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing; Human body model (HBM) |
| prEN 60749-27-2003 |
半導體器件機械和氣候試驗方法 第27部分： |
IEC 60749-27, Ed. 1: Semiconductor devices - Mechanical and climatic test methods - Part 27: Electrostatic discharge (ESD) sensitivity testing; Machine model (MM) |
| prEN 60749-29-2003 |
半導體器件機械和氣候試驗方法 第２７部分： |
IEC 60749-29, Ed. 1: Semiconductor devices - Mechanical and climatic test methods - Part 29: Latch-up test |
| prEN 60793-1-3-2000 |
光學纖維第１－３部分：總規范機械性能試驗方法草案 |
Optical fibres - Part 1-3: Generic specification; Measuring methods for mechanical characteristics (IEC 60793-1-3:2000, modified) |
| prEN 60793-1-32-2001 |
光學纖維第1-32部分：測量方法和試驗規程被覆層可剝性 草案 |
IEC 60793-1-32, Ed. 1: Optical fibres - Part 1-32: Measurement methods and test procedures; Coating strippability |
| prEN 60793-1-40-2001 |
光學纖維第１－４０部分：測量方法和試驗規程衰減草案 |
IEC 60793-1-40, Ed. 1: Optical fibres - Part 1-40: Measurement methods and test procedures; Attenuation |
| prEN 60793-1-41-2003 |
光學纖維第１－４１部分：測量方法和試驗規程帶寬草案 |
IEC 60793-1-41, Ed. 2.0: Optical fibres - Part 1-41: Measurement methods and test procedures; Bandwidth |
| prEN 60793-1-45-2001 |
光學纖維第１－４５部分：測量方法和試驗規程模場直徑草案 |
IEC 60793-1-45, Ed. 1: Optical fibres - Part 1-45: Measurement methods and test procedures; Mode field diameter |
| prEN 60793-1-49-2003 |
光學纖維第１－４９部分：測量方法和試驗規程 |
IEC 60793-1-49, Ed. 1.0: Optical fibres - Part 1-49: Measurement methods and test procedures; Differential mode delay |
| prEN 60794-4-1-1998 |
光學纖維電纜第４－１部分：高壓輸電線架空電纜 |
IEC 60794-4-1: Optical fibre cables - Part 4-1: Aerial optical cables for high voltage power lines |
| prEN 60794-4-2003 |
光學纖維電纜第４部分：高壓輸電線架空電纜 |
IEC 60794-4, Ed. 2.0: Optical fibre cables - Part 4: Sectional specification; Aerial optical cables along electrical power lines |
| prEN 6080-2001 |
航空航天系列緊公差100度標準平頭鉚釘 英制系列 |
Aerospace series - Rivet, 100?normal flush head, close tolerance - Inch series |
| prEN 6081-2001 |
航空航天系列通用頭鉚釘 英制系列 |
Aerospace series - Rivet; Universal head - Inch based series |
| prEN 60825-5-1992 |
激光產品的安全設備分類、要求和用戶指南第5部分：光纖通信安全系統草案 |
Radiation safety of laser products; equipment classification, requirements, and users guide; part 5: the safety of optical fibre communications systems |
| prEN 60839-10-1-1994 |
報警系統第10部分：道路車輛用報警系統第1節：客車草案 |
Draft IEC 60839-10-1: Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger car |
| prEN 60839-2-7-1994 |
報警系統第2部分：入侵者報警系統的要求第7節：建筑物使用的玻璃斷口狀通過探測器草案 |
Draft IEC 60839-2-7: Alarm systems - Part 2: Requirements for intruder alarm systems - Section 7: Passive glass-break detectors for use in buildings |
| prEN 60839-7-1-2000 |
報警系統第7－1部分：報警傳輸系統中串行數據接口用報文格式和協議總則草案 |
Alarm systems - Part 7-1: Message formats and protocols for serial data interfaces in alarm transmission systems; General |
| prEN 60839-7-11-2000 |
報警系統第7－11部分：報警傳輸系統中串行數據接口用報文格式和協議使用ＩＴＵ建議Ｖ．２３在與ＰＳＴ |
Alarm systems - Part 7-11: Message formats and protocols for serial data interfaces in alarm transmission systems; Serial protocol for use by digital communicator systems using ITU-T V.23 signalling at interfaces with the PSTN |
| prEN 60839-7-12-2000 |
報警系統第7－12部分：報警傳輸系統中串行數據接口用報文格式和協議使用ＩＴＵ建議Ｖ．２３信令的專用 |
Alarm systems - Part 7-12: Message formats and protocols for serial data interfaces in alarm transmission systems; PTT interfaces for dedicated communications channels using ITU-T Recommendation V.23 signalling |
| prEN 60839-7-2-2000 |
報警系統第7－2部分：報警傳輸系統中串行數據接口用報文格式和協議公共應用層協議草案 |
Alarm systems - Part 7-2: Message formats and protocols for serial data interfaces in alarm transmission systems; Common application layer protocol |
| prEN 60839-7-20-2000 |
報警系統第7－20部分：報警傳輸系統中串行數據接口用報文格式和協議使用ＩＴＵ－Ｔ建議Ｖ．２４／Ｖ． |
Alarm systems - Part 7-20: Message formats and protocols for serial data interfaces in alarm transmission systems; Terminal interfaces employing ITU-T Recommendation V.24/V.28 signalling |
| prEN 60839-7-3-2000 |
報警系統第7－3部分：報警傳輸系統中串行數據接口用報文格式和協議公共數據鏈路層協議 草案 |
Alarm systems - Part 7-3: Message formats and protocols for serial data interfaces in alarm transmission systems; Common data link layer protocol |
| prEN 60839-7-4-2000 |
報警系統第7－4部分：報警傳輸系統中串行數據接口用報文格式和協議公共運輸層協議草案 |
Alarm systems - Part 7-4: Message formats and protocols for serial data interfaces in alarm transmission systems; Common transport layer protocol |
| prEN 60839-7-5-2000 |
報警系統第7－5部分：報警傳輸系統中串行數據接口用報文格式和協議使用按ＩＳＯ／ＩＥＣ８４８２的二線 |
Alarm systems - Part 7-5: Message formats and protocols for serial data interfaces in alarm transmission systems; Alarm system interface employing a two-wire configuration in accordance with ISO/IEC 8482 |
| prEN 60839-7-6-2000 |
報警系統第7－6部分：報警傳輸系統中串行數據接口用報文格式和協議使用ＩＴＵ－Ｔ建議Ｖ．２４／Ｖ．２ |
Alarm systems - Part 7-6: Message formats and protocols for serial data interfaces in alarm transmission systems; Alarm system interfaces employing ITU-T Recommendation V.24/V.28 signalling |
| prEN 60839-7-7-2000 |
報警系統第7－7部分：報警傳輸系統中串行數據接口用報文格式和協議插入式報警系統收發信號機用報警系統 |
Alarm systems - Part 7-7: Message formats and protocols for serial data interfaces in alarm transmission systems; Alarm system interfaces for plug-in alarm system transceivers |
| prEN 6084-1999 |
航空航天系列非金屬材料面膜技術規范通用要求 |
Aerospace series - Non-metallic materials - Surfacing films - Technical specification - General requirements |
| prEN 6085-1999 |
航空航天系列非金屬材料環氧樹脂面膜 |
Aerospace series - Non-metallic materials - Epoxy surfacing films |
| prEN 60850-1999 |
鐵路設備牽引系統的供電電壓 |
IEC 60850: Railway applications - Supply voltages of traction systems |
| prEN 60862-3-2003 |
聲表面波（ＳＡＷ）濾波器第３部分：標準外形草案 |
Surface acoustic wave (SAW) filters of assessed quality - Part 3: Standard outlines |
| prEN 60865-1992 |
短路電流效應的計算草案 |
Short circuit currents; calculation of effects |
| prEN 60870-6-602-2000 |
遙控設備和系統第６部分：與ISO標準和ITU-T推薦規程一致的遙控協議第６０２節： |
Telecontrol equipment and systems - Part 6-602: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE transport profiles |
| prEN 60884-2-4-1992 |
(SELV)安全特低電壓用插頭插座的特殊要求 |
Draft IEC 60884-2-XX; part 2: particular requirements for plugs and socket-outlets for safety extra low voltage (SELV) |
| prEN 60884-2-5-1995 |
家用和類似用途的插頭插座第2-5部分：接線板的特殊要求 |
Draft IEC 60884-2-5: Plug and socket-outlets for household and similar purposes - Part 2: Particular requirements for adaptors |
| prEN 60884-2-6-1997 |
家用和類似用途的插頭插座第2-6部分：固定設施用帶連鎖帶開關插座的特殊要求 |
Draft IEC 60884-2-6: Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed installations |
| prEN 60893-1-2003 |
電工用熱固性樹脂基工業剛性層壓板第1部分：定義、名稱和一般要求草案 |
IEC 60893-1, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
| prEN 60893-2-2003 |
電工用熱固性樹脂基工業剛性層壓板第２部分：試驗方法 |
IEC 60893-2, Ed. 2: Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| prEN 60893-3-1-2003 |
電工用熱固性樹脂基工業剛性層壓板第３部分： 專用材料規范活頁１：工業硬質層壓片類型 |
IEC 60893-3-1, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials; Requirements for types of industrial rigid laminated sheets / Note: |
| prEN 60893-3-2-2003 |
電工用熱固性樹脂基工業剛性層壓板規范第３部分：專用材料規范活頁２：環氧樹脂基剛性層壓板的要求 |
IEC 60893-3-2, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials; Requirements for rigid laminated sheets based on epoxy resins / Note |
| prEN 60893-3-3-2003 |
電工用熱固性樹脂基工業剛性層壓板規范第３部分：專用材料規范活頁３：對三聚氰胺樹 脂硬質層壓片的要 |
IEC 60893-3-3, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins / N |
| prEN 60893-3-4-2003 |
電工用熱固性樹脂基工業剛性層壓板規范第3部分：專用材料規范第4活頁：酚醛樹脂基剛性層壓板的要求 |
IEC 60893-3-4, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials; Requirements for rigid laminated sheets based on phenolic resins / N |
| prEN 60893-3-5-2003 |
電工用熱固性樹脂基工業剛性層壓板規范第３部分：專用材料規范活頁５：聚酯樹脂基剛性層壓薄板的要求 |
IEC 60893-3-5, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials; Requirements for rigid laminated sheets based on polyester resins / |
| prEN 60893-3-6-2003 |
電工用熱固性樹脂基工業剛性層壓板規范第３部分：專用材料規范活頁６：對硅氧烷樹脂基剛性層壓板的要求 |
IEC 60893-3-6, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials; Requirements for rigid laminated sheets based on silicone resins / N |
| prEN 60893-3-7-2003 |
電工用熱固性樹脂基工業剛性層壓板規范第３部分：專用材料規范活頁７：聚酰亞胺樹脂基剛性層壓薄板的要 |
IEC 60893-3-7, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials; Requirements for rigid laminated sheets based on polyimide resins / |
| prEN 60895-2002 |
在標稱交流電壓達到800KV時帶電作業用的導電衣著 草案 |
Live working - Conductive clothing for use at nominal voltage up to 800 kV AC and ?00 kV DC |
| prEN 60896-21-2002 |
固定式鉛酸蓄電池第21部分： |
IEC 60896-21, Ed. 1: Stationary lead-acid batteries - Part 21: Valve regulated types; Functional characteristics and methods of test |
| prEN 60898-2000 |
家用和類似用途電器過電流保護斷路器規范 修改草案１ |
Revision of IEC 60898: Circuit-breakers for overcurrent protection for household and similar installations |
| prEN 60903-2002 |
生活用絕緣材料手套 |
Live working - Gloves of insulating material |
| prEN 60909-3-2003 |
三項交流系統短路第3部分：兩個獨立的同時單項對地短路、部分短路電流流入大地情況下的電流 |
IEC 60909-3: Short-circuit currents in three-phase a.c. systems - Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth |
| prEN 60921-2002 |
管形熒光燈鎮流器性能要求 草案 |
Ballasts for tubular fluorescent lamps - Performance requirements |
| prEN 60929-2003 |
管形熒光燈用交流供電電子鎮流器性能要求 |
AC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements |
| prEN 60952-1-2002 |
飛機用蓄電池組第1部分：一般試驗要求和性能等級 草案 |
IEC 60952-1, Ed. 2: Aircraft batteries - Part 1: General test requirements and performance levels |
| prEN 60952-2-2002 |
飛機用蓄電池組第2部分：設計和制造要求草案 |
IEC 60952-2, Ed. 2: Aircraft batteries - Part 2: Design and construction requirements |
| prEN 60952-3-2002 |
飛機用蓄電池組第2部分：設計和制造要求草案 |
IEC 60952-3, Ed. 2: Aircraft batteries - Part 3: Product standard and verification |
| prEN 60958-4-2003 |
數字音頻接口第４部分：專業類用途 草案 |
Digital audio interface - Part 4: Professional applications |
| prEN 60974-3-2003 |
電弧焊設備第３部分：電弧放電和穩定化處理 |
Arc welding equipment - Part 3: Arc striking and stabilizing devices |
| prEN 60989-1994 |
單獨變壓器自藕變壓器、可變頻率變壓器和電抗器 |
Separating transformers, autotransformers, variable transformers and reactors (IEC 60989:1991, modified) |
| prEN 60998-2-1-2003 |
家用和類似用途低壓電路連接設備第2－１部分：帶螺旋式夾緊裝置的獨立機構連接裝置的特殊要求 草案 |
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units (IEC 60998-2-1:2002, modified) / Note: Intended as replacement f |
| prEN 60998-2-2-2003 |
家用和類似用途低壓電路連接器件第２－２部分：作為帶有無螺絲型的夾緊器件的獨立單的連接器件的特別要 |
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units (IEC 60998-2-2:2002, modified) / Note: Intended as replaceme |
| prEN 60998-2-3-2003 |
家用和類似用途低壓電路連接器件第２－３部分：作為帶有絕緣穿孔夾緊器件的獨立單的連接器件草案 |
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulating piercing clamping units (IEC 60998-2-3:2002, modified) / Note: Intended as repl |
| prEN 60998-2-5-1995 |
家用和類似用途低壓電路連接器件第2－5部分：端子和藹連接器件用連接盒（接線和／或分接）的特殊要求 |
Draft IEC 998-2-5: Connecting devices for low-voltage circuits for household and similar purposes - Part 2-5: Particular requirements for connecting boxes (junction and/or tapping) for terminals or connecting devices |
| prEN 60998-2-5/prA1-1999 |
家用和類似用途低壓電路連接器件第2－5部分：端子和藹連接器件用連接盒（接線和／或分接）的特殊要求 |
Draft Amendment 1 to IEC 60998-2-5: Connecting devices for low-voltage circuits for household and similar purposes - Part 2-5: Particular requirements for connecting boxes (junction and/or tapping) for terminals or connecting devices |
| prEN 6100-2001 |
航空航天系列7050鋁合金化學薄膜的100度埋頭剪型沖模鎖緊的緊公差銷 |
Aerospace series - Pins, close tolerance, swage locking, 100?countersunk head shear type, in aluminium alloy 7050, chemical film - Inch series |
| prEN 61000-2-11-1999 |
電磁兼容性(EMC)第２部分：環境第１１節：HEMP環境分類 |
IEC 61000-2-11: Electromagnetic compatibility (EMC) - Part 2-11: Environment - Classification of HEMP environments |
| prEN 61000-2-24-1996 |
電磁兼容性(EMC) |
IEC 1000-4-24: Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 24: Test methods for protective devices for HEMP conducted disturbance - Basic EMC publication |
| prEN 61000-3-12-2003 |
prEN 61000-3-12-2003 |
|
| prEN 61000-4-6-2003 |
電磁兼容(EMC)第４部分：技術測量和試驗第６節：對射頻場誘發的傳導擾動的抗擾度 草案 |
Revision of IEC 61000-4-6: Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques; Immunity to conducted disturbances, induced by radio-frequency fields |
| prEN 61000-5-3-1998 |
電磁兼容性（ＥＭＣ）第５－３部分：安裝和調試指南ＨＥＭＰ保護概念 |
Electromagnetic compatibility (EMC) - Part 5-3: Installation and mitigation guidelines - HEMP protection concepts |
| prEN 61000-6-6-2003 |
電磁兼容性（ＥＭＣ）第６－６部分：通用標準ＨＥＭＰ室內設備的抗擾性 |
IEC 61000-6-6, Ed. 1: Electromagnetic compatibility (EMC) - Part 6-6: Generic standards; HEMP immunity for indoor equipment |
| prEN 61008-1-2003 |
家用和類似用途的沒有綜合過電流保護的剩余電流斷路器（RCCBs）第１部分：通用規則 草案 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules (IEC 61008-1:1996 + A1:2002, modified) |
| prEN 61008-2-2-1993 |
家用和類似用途的沒有綜合過電流保護的剩余電流斷路器（RCCBs）第２－２部分：通用規則對與功能上與線電壓 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs); part 2-2: applicability of the general rules to RCCBs functionally dependent on line voltage (IEC 61008-2-2:1990) |
| prEN 61009-1-2003 |
家用和類似用途的有綜合過電流保護的剩余電流斷路器（RCCBs)第１部分：通用規則 草案 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules (IEC 61009-1:1996 + A1:2002, modified) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com