標準號 |
中文名稱 |
英文名稱 |
| DIN EN 1965-1-2001 |
結構膠粘劑.腐蝕性.對銅襯底腐蝕性的測定和分類 |
(Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate; German version EN 1965-1:2001) |
| DIN EN 1965-2-2001 |
結構膠粘劑.腐蝕性.對黃銅襯底腐蝕性的測定和分類 |
(Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate; German version EN 1965-2:2001) |
| DIN EN 196500-1993 |
分規范.含空白詳細規范的薄膜式開關 |
(Sectional specification: membrane switches including blank detail specification EN 196501; German version EN 196500:1993) |
| DIN EN 196500/A1-2002 |
分規范.包括空白詳細規范的薄膜開關 |
(Sectional specification: Membrane switches including blank detail specification EN 196501; Amendment A1; German version EN 196500/A1:2001) |
| DIN EN 1966-2003 |
結構膠粘劑.用三點彎曲法通過測量粘著性測定表面特性 |
(Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; German version EN 1966:2002) |
| DIN EN 1967 Berichtigung 1-2004 |
對DIN EN 1967-2003的勘誤 |
|
| DIN EN 1967-2003 |
結構膠粘劑.用與導向托輥試驗法有關的濕剝離試驗評價鋁表面處理技術的有效性 |
(Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method; German version EN 1967:2002) |
| DIN EN 1968-2002 |
可運輸儲氣瓶.無縫鋼儲氣瓶的周期性檢驗和測試 |
(Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders; German version EN 1968:2002) |
| DIN EN 1968-2005 |
移動式儲氣瓶.無縫鋼儲氣瓶的周期性檢驗和試驗 |
|
| DIN EN 1969-2000 |
運動場表面.合成運動場表面厚度的測定 |
(Surfaces for sports areas - Determination of thickness of synthetic sports surfaces; German version EN 1969:2000) |
| DIN EN 197-1 Berichtigung 1-2004 |
對DIN EN 197-1-2004的勘誤 |
|
| DIN EN 197-1-2001 |
水泥.第1部分:普通水泥的組分、規范和合格標準 |
(Cement - Part 1: Composition, specifications and conformity criteria of common cements; German version EN 197-1:2000) |
| DIN EN 197-1-2004 |
水泥.第1部分:普通水泥的組分、規范和合格標準 |
|
| DIN EN 197-2-2000 |
水泥.第2部分:合格評定 |
(Cement - Part 2: Conformity evaluation; German version EN 197-2:2000) |
| DIN EN 197-4-2004 |
水泥.第4部分:低早硬強度高爐水泥的組分、規范和合格標準 |
|
| DIN EN 1970-2000 |
殘疾人用可調整的床.要求和試驗方法 |
(Adjustable beds for disabled persons - Requirements and test methods; German version EN 1970:2000) |
| DIN EN 1970-2005 |
殘疾人用可調整床.要求和試驗方法 |
|
| DIN EN 1971-1998 |
銅和銅合金.管道上的渦流檢驗 |
(Copper and copper alloys - Eddy current test for tubes; German version EN 1971:1998) |
| DIN EN 1972-1997 |
潛水附件.潛水服進氣管.安全性技術要求和檢驗方法 |
(Diving accessories - Snorkel - Safety requirements and test methods; German version EN 1972:1997) |
| DIN EN 1974-1999 |
食品加工機械.切片機.安全要求和衛生要求 |
(Food processing machinery - Slicing machines - Safety and hygiene requirements; German version EN 1974:1998) |
| DIN EN 1975-1999 |
移動式氣瓶.容量從0,5立升至150立升(含150立升)的鋁和鋁合金制可重復裝填便攜式無縫氣瓶的設計和結構的規范 |
(Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium alloy gas cylinders of capacity from 0,5 l up to 150 l; German version EN 1975:1999) |
| DIN EN 1975-2004 |
移動式氣瓶.容量從0.5升至150升的鋁和鋁合金制可再填充便攜式無縫氣瓶的設計和構造規范 |
|
| DIN EN 1976-1998 |
銅和銅合金.鑄銅管材 |
(Copper and copper alloys - Cast unwrought copper products; German version EN 1976:1998) |
| DIN EN 1977-1998 |
銅和銅合金.銅線材 |
(Copper and copper alloys - Copper drawing stock (wire rod); German version EN 1977:1998) |
| DIN EN 1978-1998 |
銅和銅合金.銅陰極 |
(Copper and copper alloys - Copper cathodes; German version EN 1978:1998) |
| DIN EN 1979-1999 |
塑料管道系統和保護管系統.帶成型壁的熱塑螺旋管.接縫抗拉強度的測定 |
(Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam; German version EN 1979:1999) |
| DIN EN 198-1988 |
丙烯酸材料制家用浴缸的詳細規范 |
(Specification for finished baths for domestic purposes made of acrylic material; german version EN 198:1987) |
| DIN EN 1981-2003 |
銅及銅合金.母合金 |
(Copper and copper alloys - Master alloys; German version EN 1981:2003) |
| DIN EN 1982-1998 |
銅和銅合金.金屬塊和鑄件 |
(Copper and copper alloys - Ingots and castings; German version EN 1982:1998) |
| DIN EN 1984-2000 |
工業閥門.鋼門閥門 |
(Industrial valves - Steel gate valves; German version EN 1984:2000) |
| DIN EN 1985-1999 |
助步器.一般要求和檢驗方法 |
(Walking aids - General requirements and test methods; German version EN 1985:1998) |
| DIN EN 1986-1-1997 |
電動道路車輛.能量消耗的測量方法.第1部分:純電動車輛 |
(Electrically propelled road vehicles - Measurement of energy performances - Part 1: Pure electric vehicles; German version EN 1986-1:1997) |
| DIN EN 1986-2-2003 |
電動道路車輛.能量性能的測量.第2部分:熱電混合車輛 |
(Electrically propelled road vehicles - Measurement of energy performance - Part 2: ThermaL electric hybrid vehicles; German version EN 1986-2:2001) |
| DIN EN 1987-1-1998 |
電動道路車輛.安全性的特殊規定.第1部分:車輛蓄能器 |
(Electrically propelled road vehicles - Specific requirements for safety - Part 1: On board energy storage; German version EN 1987-1:1997) |
| DIN EN 1987-2-1998 |
電動道路車輛.安全性的特殊規定.第2部分:功能安全裝置和防錯 |
(Electrically propelled road vehicles - Specific requirements for safety - Part 2: Functional safety means and protection against failure; German version EN 1987-2:1997) |
| DIN EN 1987-3-2000 |
電動道路車輛.安全性的特殊規定.第3部分:乘客的電危害防護 |
(Electrically propelled road vehicles - Specific requirements for safety - Part 3: Protection of users against electrical hazards; German version EN 1987-3:1998) |
| DIN EN 1988-1-1998 |
食品.亞硫酸鹽的測定.第1部分:優化的莫尼-威廉法(Monier-Williams) |
(Foodstuffs - Determination of sulfite - Part 1: Optimized Monier-Williams method; German version EN 1988-1:1998) |
| DIN EN 1988-2-1998 |
食品.亞硫酸鹽的測定.第2部分:酶催化法 |
(Foodstuffs - Determination of sulfite - Part 2: Enzymatic method; German version EN 1988-2:1998) |
| DIN EN 1989-2000 |
熱塑性管道系統.地下常壓排污設施用接頭.密封壓力評定法測定帶熱塑性彈性體(TPE)密封件接頭的長期密封性能 |
(Thermoplastics piping systems - Joints for buried non-pressure sewage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure; German version EN 1989:2000) |
| DIN EN 1990-2002 |
歐洲法規:結構設計基礎 |
(Eurocode: Basis of structural design; German version EN 1990:2002) |
| DIN EN 1991-1-1-2002 |
歐洲法規1:對結構的作用.第1-1部分:一般作用.建筑物的比重、固有負荷和有效負荷 |
(Eurocode 1: Actions on structures - Part 1-1: General actions; Densities, self-weight, imposed loads for buildings; German version EN 1991-1-1:2002) |
| DIN EN 1991-1-3-2004 |
歐洲法規1.對結構物的作用.第1-3部分:一般作用.雪荷載 |
|
| DIN EN 1991-1-4-2005 |
歐洲法規1:對結構物的作用.第1-4部分:一般作用.風作用 |
|
| DIN EN 1991-1-5-2004 |
歐洲法規1:對結構物的作用.第1-5部分:一般作用.熱作用 |
|
| DIN EN 1991-2-2004 |
歐洲法規1:對結構的作用.第2部分:橋上交通負載 |
|
| DIN EN 1992-1-1-2005 |
歐洲法規2.混凝土結構設計.第1-1部分:一般規則和建筑規則 |
|
| DIN EN 1993-1-1-2005 |
歐洲法規3:鋼結構的設計.第1-1部分:一般規則和建筑物規則 |
|
| DIN EN 1993-1-10-2005 |
歐洲法規3:鋼結構的設計.第1-10部分:材料硬度和貫穿厚度特性 |
|
| DIN EN 1993-1-8-2005 |
歐洲法規3:鋼結構的設計.第1-8部分:接頭的設計 |
|
| DIN EN 1993-1-9-2005 |
歐洲法規3:鋼結構的設計.第1-9部分:疲勞 |
|
| DIN EN 1995-1-1-2005 |
歐洲法規 5:木材結構設計.第1-1部分：總則.一般原則和建筑原則.德文版本 EN 1995-1-1-2004 |
|
| DIN EN 1997-1-2005 |
歐洲法規7:土木技術設計.第1部分:總則 |
|
| DIN EN 2-1993 |
火災分級 |
(Classification of fires; german version EN 2:1992) |
| DIN EN 2-2005 |
火災分級 |
|
| DIN EN 20-1-1992 |
木材防腐劑.對紅褐色蛀蟲(斯蒂芬)預防作用的測定.第1部分:表面處理(試驗室法) |
(Wood preservatives; determination of the effectiveness against Lyctus brunneus (Stephens); part 1: application by surface treatment (laboratory method); german version EN 20-1:1992) |
| DIN EN 20-2-1993 |
木材防腐劑.對竹粉囊蟲(LY-Cuts)預防作用的測定.第2部分:全浸入法(實驗室法) |
(Wood preservatives; determination of the protective effectiveness against Lyctus brunneus (Stephens); part 2: application by impregnation (laboratory method); German version EN 20-2:1993) |
| DIN EN 200-1990 |
衛生設備管件.排放閥和混合閥的一般技術要求(公稱尺寸1/2PN10.最低水壓0.25MPa(0.5巴) |
(Sanitary taps; general technical specifications for single taps and mixer taps (nominal size 1/2) PN 10; minimum flow pressure of 0,05 MPa (0,5 bar); german version EN 200:1989) |
| DIN EN 200-2005 |
衛生設備管件.單排閥和混合閥(PN 10).一般技術規范 |
|
| DIN EN 200-2005 |
衛生設備管件.單排閥和混合閥(PN 10).一般技術規范 |
|
| DIN EN 200-2005 |
衛生設備管件.單排閥和混合閥(PN 10).一般技術規范 |
|
| DIN EN 2000-1992 |
航空和航天.質量保證.航空航天業的EN產品.生產廠家質量保證體系的批準 |
(Aerospace series; quality assurance, EN aerospace products, approval of the quality system of manufacturers; german version EN 2000:1991) |
| DIN EN 2004-1-1993 |
航空和航天.鋁合鋁合金制品的檢驗方法.鍛鋁合金導電率的測定 |
(Aerospace series; test methods for aluminium and aluminium alloy products; part 1: determination of electrical conductivity of wrought aluminium alloys; German version EN 2004-1:1993) |
| DIN EN 2004-5-1993 |
航空和航天.鋁和鋁合金制品的檢驗方法.電鍍半成品時測定鍍層厚度和銅滲濾 |
(Aerospace series; test methods for aluminium and aluminium alloy products; part 5: determination of cladding thickness and copper diffusion of clad semi-finished products; German version EN 2004-5:1993) |
| DIN EN 2009-1995 |
航空和航天.航空軸承.單列鋼制凹槽球軸承.直徑系列8和9.尺寸負荷.不適于新結構 |
(Aerospace - Bearings-airframe rolling, rigid single row ball bearings in steel; diameter series 8 and 9 - Dimensions and loads; inactive for new design; German version EN 2009:1984) |
| DIN EN 201-1997 |
橡膠機械和塑料機械.噴射造型機.安全要求 |
(Rubber and plastics machines - Injection moulding machines - Safety requirements; German version EN 201:1997) |
| DIN EN 201/A1-2000 |
橡膠機械和塑料機械.注射成型機.安全要求 |
(Rubber and plastics machines - Injection moulding machines - Safety requirements; German version EN 201:1997/A1:2000) |
| DIN EN 201/A2-2005 |
塑料和橡膠機械.注模機.安全性要求 |
|
| DIN EN 20105-A02-1994 |
紡織品.色牢度試驗.第A02部分:顏色變化評定用灰度標 |
(Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993); German version EN 20105-A02:1994) |
| DIN EN 20105-A03-1994 |
紡織品.色牢度試驗.第A03部分:沾污評定的灰度標 |
(Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining (ISO 105-A03:1993); German version EN 20105-A03:1994) |
| DIN EN 20105-C01-1993 |
紡織品.色牢度試驗.第C01部分:耐洗滌色牢度:試驗1 |
(Textiles; tests for colour fastness; part C01: colour fastness to washing; test 1 (ISO 105-C01:1989); german version EN 20105-C01:1992) |
| DIN EN 20105-C02-1993 |
紡織品.色牢度試驗.第C02部分:耐洗滌色牢度:試驗2 |
(Textiles; tests for colour fastness; part C02: colour fastness to washing; test 2 (ISO 105-C02:1989); german version EN 20105-C02:1992) |
| DIN EN 20105-C03-1993 |
紡織品.色牢度試驗.第C03部分:耐洗滌色牢度:試驗3 |
(Textiles; tests for colour fastness; part C03: colour fastness to washing; test 3 (ISO 105-C03:1989); german version EN 20105-C03:1992) |
| DIN EN 20105-C04-1993 |
紡織品.色牢度試驗.第C04部分:耐洗滌色牢度:試驗4 |
(Textiles; tests for colour fastness; part C04: colour fastness to washing; test 4 (ISO 105-C04:1989); german version EN 20105-C04:1992) |
| DIN EN 20105-C05-1993 |
紡織品.色牢度試驗.第C05部分:耐洗滌色牢度:試驗5 |
(Textiles; tests for colour fastness; part C05: colour fastness to washing; test 5 (ISO 105-C05:1989); german version EN 20105-C05:1992) |
| DIN EN 20105-N01-1995 |
紡織品.色牢度試驗.第N01部分:耐褪色的色牢度.次氯酸鹽試驗方法 |
(Textiles - Tests for colour fastness - Part N01: Colour fastness to bleaching: Hypochlorite (ISO 105-N01:1993); German version EN 20105-N01:1995) |
| DIN EN 2011-1995 |
航空和航天.航空軸承.單列不銹鋼凹槽球軸承.直徑系列8和9.尺寸和負荷.不適于新結構 |
(Aerospace - Bearings-airframe rolling, rigid single row ball bearings in corrosion resisting steel; diameter series 8 and 9 - Dimensions and loads; inactive for new design; German version EN 2011:1984) |
| DIN EN 2012-1995 |
航空和航天.航空軸承.單列鋼制凹槽球軸承.直徑系列0和2.尺寸和負荷.不適于新結構 |
(Aerospace - Bearings-airframe rolling, rigid single row ball bearings in steel; diameter series 0 and 2 - Dimensions and loads; inactive for new design; German version EN 2012:1984) |
| DIN EN 20139-1992 |
紡織品.濕度調節和檢驗的標準大氣 |
(Textiles; standard atmospheres for conditioning and testing (ISO 139:1973); german version EN 20139:1992) |
| DIN EN 2014-1995 |
航空和航天.航空軸承.單列不銹鋼制單列凹槽球軸承.直徑系列0和2.尺寸和負荷.不適于新結構 |
(Aerospace - Bearings-airframe rolling, rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2 - Dimensions and loads; inactive for new design; German version EN 2014:1984) |
| DIN EN 20140-10-1992 |
聲學.建筑物和構件隔音性能測量.試驗臺上小型構件的氣載聲隔離性能測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 10: Laboratory measurement of airborne sound insulation of small building elements; German version EN 20140-10:1992) |
| DIN EN 20140-2-1993 |
聲學.建筑物和建筑物構件內的隔音測量.第2部分:精度要求數據 |
(Acoustics; measurement of sound insulation in buildings and of building elements; part 2: determination, verification and application of precision data (ISO 140-2:1991); German version EN 20140-2:1993) |
| DIN EN 20140-3-1995 |
聲學.建筑物和建筑物構件內的隔音測量.第3部分:建筑物構件的氣載音響隔離的實驗室測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995); German version EN 20140-3:1995) |
| DIN EN 20140-9-1993 |
聲學.建筑物和建筑單內的隔音測量.第9部分:上有壓力通風懸吊式天花板裝置的房間之間空氣隔音的實驗室測量 |
(Acoustics; measurement of sound insulation in buildings and of building elements; Part 9: laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it (ISO 140-9:1985); German version EN 20140-9:1993) |
| DIN EN 2015-1995 |
航空和航天.航空軸承.雙列鋼制球面球軸承.直徑系列2.尺寸和負荷.不適于新結構 |
(Aerospace - Bearings-airframe rolling, double row self aligning ball bearings in steel; diameter series 2 - Dimensions and loads; inactive for new design; German version EN 2015:1984) |
| DIN EN 2017-1995 |
航空和航天.航空軸承.雙列不銹鋼制球面球軸承.直徑系列2.尺寸和負荷.不適于新結構 |
(Aerospace - Bearings-airframe rolling, double row self aligning ball bearings in corrosion resisting steel; diameter series 2 - Dimensions and loads; inactive for new design; German version EN 2017:1984) |
| DIN EN 2018-1995 |
航空和航天.航空軸承.單列鋼制球面軸承.直徑系列3和4.尺寸和負荷.不適于新結構 |
(Aerospace - Bearings-airframe rolling, single row self aligning roller bearings in steel; diameter series 3 and 4 - Dimensions and loads; inactive for new design; German version EN 2018:1984) |
| DIN EN 20187-1993 |
紙、紙板和紙漿.調節和檢驗用的標準環境氣候條件及監測氣候條件和調節試樣的方法 |
(Paper, board and pulps; standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990); German version EN 20187:1993) |
| DIN EN 2020-1995 |
航空和航天.航空軸承.單列耐蝕鋼制球面軸承.直徑系列3和4.尺寸和負荷.不適于新結構 |
(Aerospace - Bearings-airframe rolling, single row self aligning roller bearings in corrosion resisting steel; diameter series 3 and 4 - Dimensions and loads; inactive for new design; German version EN 2020:1984) |
| DIN EN 2022-1989 |
航空和航天.本身帶潤滑層的不銹鋼滑動軸承.輕系列.尺寸和負荷 |
(Aerospace; bearings, spherical plain, in corrosion resisting steel, with self-lubricating liner, light series; dimensions and loads) |
| DIN EN 20225-1992 |
緊固件.螺釘和螺母.標注尺寸(ISO225-83) |
(Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensions (ISO 225:1983); german version EN 20225:1991) |
| DIN EN 2023-1989 |
航空和航天.本身帶潤滑層的不銹鋼滑動軸承.常規系列.尺寸和負荷 |
(Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liner, normal series; dimensions and loads) |
| DIN EN 20273-1992 |
緊固件.螺釘用通孔(ISO273-79) |
(Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991) |
| DIN EN 20284-1993 |
輸送機皮帶.電導率.規范和試驗方法 |
(Conveyor belts; electrical conductivity; specification and method of test (ISO 284:1982); German version EN 20284:1993) |
| DIN EN 20287-1994 |
紙和紙板.水份含量的測定.烘干法 |
(Paper and board - Determination of moisture content - Oven-drying method (ISO 287:1985); German version EN 20287:1994) |
| DIN EN 203-1-1996 |
大型燃?xì)獯妒掠镁?第1部分:安全性的一般規定 |
(Gas heated catering equipment - Part 1: Safety requirements (includes Amendment A1:1995); German version EN 203-1:1992 + A1:1995) |
| DIN EN 203-1-2005 |
氣體加熱的給養設備.第1部分:一般安全規范 |
|
| DIN EN 203-1/A2-1999 |
大型燃?xì)獯妒掠镁?第1部分:安全性要求.修改件A2 |
(Gas heated catering equipment - Part 1: Safety requirements; Amendment A2; German version EN 203-1:1992/A2:1999) |
| DIN EN 203-2-1995 |
用氣體燃料的大型廚房器具.第2部分:合理使用能源 |
(Gas heated catering equipment - Part 2: Rational use of energy; German version EN 203-2:1995) |
| DIN EN 2032-1-2003 |
航空航天系列.金屬材料.第1部分:常規命稱與符號 |
(Aerospace series - Metallic materials - Part 1: Conventional designation; German and English version EN 2032-1:2001) |
| DIN EN 2032-2-1994 |
航空和航天.金屬材料.第2部分:供貨狀態下經熱處理的標記字母 |
(Aerospace series; metallic materials; part 2: coding of metallurgical condition in delivery condition; German version EN 2032-2:1994) |
| DIN EN 20340-1993 |
阻燃輸送機皮帶.要求和試驗方法 |
(Conveyor belts; flame retardation; specifications and test method (ISO 340:1988); German version EN 20340:1993) |
| DIN EN 20354-1993 |
聲學.混響室中聲音的吸收測量 |
(Acoustics; measurement of sound absorption in a reverberation room (ISO 354:1985); German version EN 20354:1993) |
| DIN EN 20354/A1-1997 |
聲學.混響室中聲音的吸收測量.修訂件1:聲音吸收試驗用試樣安裝 |
(Acoustics - Measurement of sound absorption in a reverberation room; Amendment A1: Test specimen mountings for sound absorption tests (ISO 354:1985/AMD 1:1997); German version EN 20354/A1:1997) |
| DIN EN 204-2001 |
非承重構件粘接熱塑木膠粘劑的分類.德文版本EN204-2001 |
(Classification of thermoplastic wood adhesives for non-structural applications; German version EN 204:2001) |
| DIN EN 2044-2003 |
航空航天系列.公差等級h11、直徑4mmD63mm的鋁及鋁合金拉制圓棒材.尺寸 |
(Aerospace series - Round bars, drawn, in aluminium and aluminium alloys, tolerance class h11, diameter 4 mmD63 mm - Dimensions; German and English version EN 2044:2001) |
| DIN EN 2045-2003 |
航空航天系列.公差等級h11、厚度6mma50mm的鋁及鋁合金拉制方棒.尺寸 |
(Aerospace series - Square bars, drawn, in aluminium and aluminium alloys, tolerance class h11, thickness 6 mma50 mm - Dimensions; German and English version EN 2045:2001) |
| DIN EN 2046-2003 |
航空航天系列.公差等級h11.對邊寬度7mma50mm的鋁及鋁合金拉制六角形棒材.尺寸 |
(Aerospace series - Hexagonal bars, drawn, in aluminium and aluminium alloys, tolerance class h11, width across flats 7 mma50 mm - Dimensions; German and English version EN 2046:2001) |
| DIN EN 205-2003 |
膠粘劑.非結構上用木材膠粘劑.搭接接頭的抗拉伸剪切強度的測定 |
(Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints; German version EN 205:2003) |
| DIN EN 20534-1993 |
紙和紙板.厚度和表觀松密度或表觀板密度的測定 |
(Paper and board; determination of thickness and apparent bulk density or apparent sheet density (ISO 534:1988); German version EN 20534:1993) |
| DIN EN 20535-1994 |
紙和紙板.水吸收性測定.Cobb法 |
(Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:1991); German version EN 20535:1994) |
| DIN EN 20594-1 Berichtigung 1-1996 |
對DINEN20594-1:1995-01的校正 |
(Corrigenda to DIN EN 20594-1:1995-01 (EN 20594-1:1993/AC:1996)) |
| DIN EN 20594-1-1995 |
注射器、針頭和某些其它醫用設備的有6%錐度的錐形配件.第1部分:一般要求 |
(Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986); German version EN 20594-1:1993) |
| DIN EN 206-1-2001 |
混凝土.第1部分:規范,性能,生產和一致性 |
(Concrete - Part 1: Specification, performance, production and conformity; German version EN 206-1:2000) |
| DIN EN 206-1/A1-2004 |
混凝土.第1部分:規范、性能、生產及合格性 |
|
| DIN EN 2063-1995 |
航空和航天.飛機機身用的滾動軸承.交貨技術條件.不適于新結構 |
(Aeorspace series - Airframe rolling bearings - Technical specification; inactive for new design; German version EN 2063:1992) |
| DIN EN 20638-1993 |
紙漿.干物質含量的測定 |
(Pulps; determination of dry matter content (ISO 638:1978); German version EN 20638:1993) |
| DIN EN 2064-1992 |
航空和航天.帶自動潤滑層的不銹鋼關節軸承.交貨技術條件 |
(Aerospace series; bearings spherical plain in corrosion resisting steel with self lubricating liner; technical specification; german version EN 2064:1992) |
| DIN EN 2066-2003 |
航空航天系列.鋁合金擠壓型材.一般公差 |
(Aerospace series - Extruded section in aluminium alloys - General tolerances; German and English version EN 2066:2001) |
| DIN EN 2067-1996 |
航空和航天.帶自動調心球軸承的吊環端頭.交貨技術條件 |
(Aerospace series - Rod ends with self-aligning ball bearings - Technical specification; German version EN 2067:1996) |
| DIN EN 2068-1996 |
航空和航天.帶關節軸承和自潤滑涂層的吊環端頭.交貨技術條件 |
(Aerospace series - Rod ends with self-lubricating, self-aligning bearings - Technical specification; German version EN 2068:1996) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com