標準號 |
中文名稱 |
英文名稱 |
| DIN EN 3042-1992 |
航空和航天.質量保證.航空航天業的EN產品.評定方法 |
(Aerospace series; quality assurance, EN aerospace products; qualification procedure; german version EN 3042:1991) |
| DIN EN 3044-1998 |
航空和航天.自鎖,金屬絲螺紋組件用安裝孔,結構標準 |
(Aerospance series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard; German version EN 3044:1998) |
| DIN EN 3048-1992 |
航空和航天.室溫條件下高負荷、輕系列、帶自動潤滑層的耐蝕鋼關節軸承.尺寸和負載 |
(Aerospace series; bearings, spherical plain in corrosion resisting steel with self-lubricating liner, light series, elevated loads at ambient temperature; dimensions and loads; german version EN 3048:1992) |
| DIN EN 3049-1998 |
航空和航天.低壓力變形氟碳橡膠(FKM)制O型環.硬度80IRHD(國際橡膠硬度標度) |
(Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD; German version EN 3049:1998) |
| DIN EN 305-1997 |
熱交換器.功率測定檢驗用的概念和一般規定 |
(Heat exchangers - Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers; German version EN 305:1997) |
| DIN EN 3050-1998 |
航空和航天.低壓力變形氟碳橡膠(FKM)制O型環.交貨技術條件 |
(Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification; German version EN 3050:1998) |
| DIN EN 3052-1994 |
航空和航天.短螺紋耐熱耐蝕鋼制鈍化六角配合螺栓.等級:1100MPa(室溫)/425攝氏度 |
(Aerospace series; bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 C (includes amendment A1:1993); German version EN 3052:19 |
| DIN EN 3053-1994 |
航空和航天.飛機用軸承.鋼制單列球面軸承.尺寸和負載 |
(Aerospace series; bearings; airframe rolling, single row self-aligning roller bearings in steel; dimensions and loads; German version EN 3053:1994) |
| DIN EN 3054-1994 |
航空和航天.飛機用軸承.鍍鉻鋼單列球面軸承.尺寸和負載 |
(Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in steel, cadmium plated; dimensions and loads; German version EN 3054:1994) |
| DIN EN 3055-1994 |
航空和航天.飛機用軸承.不銹鋼單列球面軸承.尺寸和負載 |
(Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in corrosion resisting steel; dimensions and loads; German version EN 3055:1994) |
| DIN EN 3056-1994 |
航空和航天.飛機用軸承.鋼制雙列向心球軸承.尺寸和負載 |
(Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel; dimensions and loads; German version EN 3056:1994) |
| DIN EN 3057-1994 |
航空和航天.飛機用軸承.鍍鉻鋼雙列向心球軸承.尺寸和負載 |
(Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel, cadmium plated; dimensions and loads; German version EN 3057:1994) |
| DIN EN 3058-1994 |
航空和航天.飛機用軸承.不銹鋼雙列向心球軸承.尺寸和負載 |
(Aerospace series; bearings, airframe rolling; rigid double row ball bearings in corrosion resisting steel; dimensions and loads; German version EN 3058:1994) |
| DIN EN 306-1997 |
熱交換器.功率測定用測定和測量精度 |
(Heat exchangers - Methods of measuring the parameters necessary for establishing the performance; German version EN 306:1997) |
| DIN EN 3063-1994 |
航空和航天.耐高溫鋼NI-P101HT(耐熱鎳基合金)制中螺紋十二角配合螺絲.等級:1210MPa(室溫)730攝氏度 |
(Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 C; German version EN 3063:1994) |
| DIN EN 3064-1996 |
航空和航天.鋸齒形自鎖鉚接螺母.裝入法 |
(Aerospace series -Shank nuts, self-locking, serrated - Installation procedure; German version EN 3064:1996) |
| DIN EN 3065-1996 |
航空和航天.自鎖嚙合裝入鉚接螺母用安裝孔.設計標準 |
(Aerospace series - Installation holes for self-locking, serrated shank nuts; design Standard; German version EN 3065:1996) |
| DIN EN 307-1998 |
熱交換器.保持所有各種結構熱交換器功率用安裝和運行指南以及維修說明的制定用導引 |
(Heat exchangers - Guidelines to prepare installation, operating and maintenance instructions required to maintain the performance of each type of heat exchanger; German version EN 307:1998) |
| DIN EN 308-1997 |
熱交換器.測定空氣/空氣和空氣/廢氣熱回收設備功率標準的檢驗方法 |
(Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices; German version EN 308:1997) |
| DIN EN 3081-2002 |
航空航天系列.鈦合金管連接件8°30`.帶動梁密封端頭的修理用焊接箍 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair; German version EN 3081:2001) |
| DIN EN 3082-2004 |
航空航天系列.鈦合金管連接件8°30.修理用悶頭焊接活接頭 |
|
| DIN EN 3083-2004 |
航空航天系列.鈦合金管連接件8°30.修理用悶頭長焊接端頭活接頭 |
|
| DIN EN 3084-2004 |
航空航天系列.鈦合金管連接件8°30.修理用焊接端頭螺紋活接頭 |
|
| DIN EN 309-1992 |
刨花板.定義和分級 |
(Particleboards; definition and classification; german version EN 309:1992) |
| DIN EN 30993-3-1994 |
醫療裝置生物學評定.第3部分:遺傳毒性、致癌力和生殖毒性試驗 |
(Biological evaluation of medical devices; part 3: tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:1992); German version EN 30993-3:1993) |
| DIN EN 30993-6-1994 |
醫療裝置生物學評定.第6部分:植入后局部作用試驗 |
(Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO 10993-6:1994); German version EN 30993-6:1994) |
| DIN EN 31-1999 |
盥洗臺.連接尺寸 |
(Pedestal wash basins - Connecting dimensions; German version EN 31:1998) |
| DIN EN 310-1993 |
木材制品.彎曲回彈彈性模量和彎曲強度的測定 |
(Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993) |
| DIN EN 31092-1994 |
紡織品.生理效應.穩態條件下耐熱和耐水蒸汽性能的測量 |
(Textiles; physiological effects; measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) (ISO 11092:1993); German version EN 31092:1993) |
| DIN EN 311-2002 |
木質板材.表面堅固性.試驗方法 |
(Wood-based panels - Surface soundness - Test method; German version EN 311:2002) |
| DIN EN 3112-1995 |
航空和航天.鍍隔合金鋼制螺紋接近頂部的六角頭螺釘.等級:900MPa(室溫下)/235℃ |
(Aerospace series - Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 C; German version EN 3112:1995) |
| DIN EN 312-1-1996 |
木屑板.規范.第1部分:各種板型的一般要求 |
(Particleboards - Specifications - Part 1: General requirements for all board types; German version EN 312-1:1996) |
| DIN EN 312-2-1996 |
木屑板.規范.第2部分:在干躁區用于一般目的板材的要求 |
(Particleboards - Specifications - Part 2: Requirements for general purpose boards for use in dry conditions; German version EN 312-2:1996) |
| DIN EN 312-3-1996 |
木屑板.規范.第3部分:在干躁區用于室內設備(包括家具)的板材的要求 |
(Particleboards - Specifications - Part 3: Requirements for boards for use in interior fitments (including furniture) in dry conditions; German version EN 312-3:1996) |
| DIN EN 312-4-1996 |
木屑板.規范.第4部分:在干躁區用于承重目的板材的要求 |
(Particleboards - Specifications - Part 4: Requirements for load-bearing boards for use in dry conditions; German version EN 312-4:1996) |
| DIN EN 312-5-1997 |
木屑板.規范.第5部分:在潮濕區用于承重目的板材的要求 |
(Particleboards; specifications - Part 5: Requirements for load-bearing boards for use in humid conditions; German version EN 312-5:1997) |
| DIN EN 312-6-1996 |
木屑板.規范.第6部分:在干躁區用于承重目的高負載板的要求 |
(Particleboards - Specifications - Part 6: Requirements for heavy duty load-bearing boards for use in dry conditions; German version EN 312-6:1996) |
| DIN EN 312-7-1997 |
木屑板.規范.第7部分:在潮濕區用于承重目的高負載板的要求 |
(Particleboards; specifications - Part 7: Requirements for heavy duty load-bearing boards for use in humid conditions; German version EN 312-7:19973) |
| DIN EN 31252-1994 |
激光和激光相關設備.激光裝置.對文件的最低要求 |
(Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:1993); German version EN 31252:1994) |
| DIN EN 31253-1994 |
激光和激光相關設備.激光裝置.機械接口 |
(Lasers and laser related equipment - Laser device - Mechanical interfaces (ISO 11253:1993); German version EN 31253:1994) |
| DIN EN 313-1-1996 |
膠合板.分級和術語.第1部分:分級 |
(Plywood - Classification and terminology - Part 1: Classification; German version EN 313-1:1996) |
| DIN EN 313-2-1999 |
膠合板.分類和術語.第2部分:術語 |
(Plywood - Classification and terminology - Part 2: Terminology; German version EN 313-2:1999) |
| DIN EN 3135-1996 |
航空和航天.耐蝕鋼FE-PA11制鈍化帶通用頭的全鉚釘.英制系列 |
(Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series; German version EN 3135:1996) |
| DIN EN 3136-1996 |
航空和航天.耐蝕鋼FE-PA92HT制鈍化帶通用頭的全鉚釘.英制系列 |
(Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA92HT, passivated, inch based series; German version EN 3136:1996) |
| DIN EN 3138-2001 |
航空航天系列.耐腐蝕鋼FE-PA2601制鈍化英制100度沉頭標稱凸頭的實心鉚釘 |
(Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series; German version EN 3138:2001) |
| DIN EN 3139-2001 |
航空航天系列.耐腐蝕鋼FE-PA11制鈍化英制100度標稱沉頭的實心鉚釘 |
(Aerospace series - Rivets, solid, 100?countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series; German version EN 3139:2001) |
| DIN EN 314-1-1993 |
膠合板.粘合質量.第1部分:第1部分:檢驗方法 |
(Plywood; bonding quality; part 1: test methods; German version EN 314-1:1993) |
| DIN EN 314-2-1993 |
膠合板.粘合質量.第2部分:要求 |
(Plywood; bonding quality; part 2: requirements; German version EN 314-2:1993) |
| DIN EN 3140-2001 |
航空航天系列.耐腐蝕鋼FE-PA2601制鈍化英制100度標稱沉頭的實心鉚釘 |
(Aerospace series - Rivets, solid, 100?countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series; German version EN 3140:2001) |
| DIN EN 3141-1996 |
航空和航天.耐高溫鎳基合金鋼NI-P11制鍍鎘帶通用頭的全鉚釘.英制系列 |
(Aerospace series - Rivets, solid, universal head, in head resisting nickel base alloy NI-P11, cadmium plated, inch based series; German version EN 3141:1996) |
| DIN EN 3142-1996 |
航空和航天.耐高溫鎳基合金鋼NI-P11制帶通用頭的全鉚釘.英制系列 |
(Aerospace series - Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series; German version EN 3142:1996) |
| DIN EN 31427-1995 |
銀和銀珠寶合金的測定.溴化鉀容量法 |
(Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide (ISO 11427:1993, includes Corr. 1:1994) (includes EN 31427:1994/AC:1994); German version EN 31427:1994) |
| DIN EN 3145-2003 |
航空航天系列.熱軋圓鋼棒.標準公差.直徑6mm≤D≤250mm.尺寸 |
(Aerospace series - Round bars, hot rolled in steel - Normal tolerances; Diameter 6 mm D 250 mm; Dimensions; German and English version EN 3145:2001) |
| DIN EN 3146-2003 |
航空航天系列.緊公差、直徑6mmD250mm的熱軋鋼制圓形棒材.尺寸 |
(Aerospace series - Round bars, hot rolled, in steel, close tolerances, diameter 6 mmD250 mm - Dimensions; German and English version EN 3146:2001) |
| DIN EN 3149-1996 |
航空和航天.鉚接螺母.60度擴徑安裝孔法蘭.結構標準 |
(Aerospace series - Shank nuts - Installation holes, 60 swage, flanges - Design standard; German version EN 3149:1996) |
| DIN EN 315-2000 |
膠合板.尺寸公差 |
(Plywood - Tolerances for dimensions; German version EN 315:2000) |
| DIN EN 3150-1995 |
航空和航天.高溫固定鎳基合金制帶臺的圓柱銷 |
(Aerospace series - Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718); German version EN 3150:1995) |
| DIN EN 3151-1995 |
航空和航天.高溫鎳基合金NI-P100HI(因康718)制光滑圓柱銷 |
(Aerospace series - Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718); German version EN 3151:1995) |
| DIN EN 3152-2005 |
航空航天系列.鍍銀或未涂覆的耐熱鋼FE-PA2601 (A286)制MJ螺紋自鎖緊螺母.等級:1100 MPa(室溫)/425 鳦.技術規范 |
|
| DIN EN 316-1999 |
木纖維板.定義、分類和符號 |
(Wood fibreboards - Definition, classification and symbols; German version EN 316:1999) |
| DIN EN 317-1993 |
木屑板和纖維板.浸水后厚度膨脹的測定 |
(Particleboards and fibreboards; determination of swelling in thickness after immersion in water; German version EN 317:1993) |
| DIN EN 318-2002 |
纖維板.空氣相對濕度變化引起的尺寸改變的測定 |
(Wood-based panels - Determination of dimensional changes associated with changes in relative humidity; German version EN 318:2002) |
| DIN EN 319-1993 |
木屑板和纖維板.垂直于板平面抗拉強度的測定 |
(Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board; German version EN 319:1993) |
| DIN EN 3196-1994 |
航空和航天.耐高溫鋼FE-PA92HT(A286)制鍍銀自鎖六角頭螺母.等級:1100MPa(室溫)425攝氏度 |
(Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3196:1994) |
| DIN EN 32-1999 |
壁懸式盥洗臺.連接尺寸 |
(Wall-hung wash basins - Connecting dimensions; German version EN 32:1998) |
| DIN EN 320-1993 |
纖維板.螺釘拔出阻力的測定 |
(Fibreboards; determination of resistance to axial withdrawal of screws; German version EN 320:1993) |
| DIN EN 3202-1996 |
廚房家具.內裝和外放廚柜和工作臺的安全技術要求和檢驗方法. |
(Aerospace series - Holes and traps for T-head bolts - Design standard; German version EN 3202:1995) |
| DIN EN 3207-1998 |
航空和航天.橡膠混合物.交貨技術條件 |
(Aerospace series - Rubber compounds - Technical specification; German version EN 3207:1998) |
| DIN EN 321-2002 |
木質人造板.循環試驗條件下抗?jié)裥缘臏y定 |
(Wood-based panels - Determination of moisture resistance under cyclic test conditions; German version EN 321:2001) |
| DIN EN 3212-1995 |
航空和航天.涂料.在阻尼氯化納溶劑中用更換浸漬試驗測定耐蝕性 |
(Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution; German version EN 3212:1995) |
| DIN EN 322-1993 |
木質板料.含濕度測定 |
(Wood-based panels; determination of moisture content; German version EN 322:1993) |
| DIN EN 323-1993 |
木質板.粗密度測定 |
(Wood-based panels; determination of density; German version EN 323:1993) |
| DIN EN 3230-2001 |
航空航天系列.鋼制、鍍鎘、標準對邊、高度降低的槽頭/齒形頭六角螺母.等級:900MPa(室溫)/235℃ |
(Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 鳦; German version EN 3230:2001) |
| DIN EN 3236-1998 |
航空和航天.薄壁,自鎖,耐高溫,鎳基合金NI-P100HT(因康718)制短螺紋接頭.鍍銀內螺紋 |
(Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Silver plated internal thread; German version EN 3236:1998) |
| DIN EN 3237-1998 |
航空和航天.薄壁,自鎖,鎳基合金NI-P100HT(因康718)制長螺紋接頭.鍍銀內螺紋 |
(Aerospace series - Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100 HT (Inconel 718) - Silver plated internal thread; German version EN 3237:1998) |
| DIN EN 3239-1995 |
航空和航天.鍍銀螺紋NI-P101HT耐高熱鎳基合金制自鎖十二角螺母.等級:1210MPa(室溫下)/730℃ |
(Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/650 C; German version EN 3239:1995) |
| DIN EN 324-1-1993 |
木質板料.板面尺寸測定.第1部分:厚度.寬度和長度測定 |
(Wood-based panels; determination of dimensions of boards; part 1: determination of thickness, width and length; German version EN 324-1:1993) |
| DIN EN 324-2-1993 |
木質板料.板面尺寸測定.垂直度和棱邊平直性測定 |
(Wood-based panels; determination of dimensions of boards; part 2: determination of squareness and edge straightness; German version EN 324-2:1993) |
| DIN EN 3243-2002 |
航空和航天系列.鈦合金管連接件8度30分.帶動力束封端口的金屬圈焊接 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Ferrule welded, with dynamic beam seal end; German version EN 3243:2001) |
| DIN EN 3244-2002 |
航空和航天系列.鈦合金管連接件8度30分.雙頭接頭 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, double ended; German version EN 3244:2001) |
| DIN EN 3245-2002 |
航空和航天系列.鈦合金管連接件8度30分.異徑接頭 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, reducer; German version EN 3245:2001) |
| DIN EN 3246-2002 |
航空和航天系列.鈦合金管連接件8度30分.悶頭接頭 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead; German version EN 3246:2001) |
| DIN EN 3247-2002 |
航空和航天系列.鈦合金管連接件8度30分.焊接端的悶頭接頭 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead, welded end; German version EN 3247:2001) |
| DIN EN 3248-2003 |
航空航天系列.鈦合金管聯接器8°30’.帶鎖緊環的縮徑管端頭轉接器 |
(Aerospace series - Pipe coupling 8°30’in titanium alloy - Adapters, reduced pipe end, with locking ring; German and English version EN 3248:2001) |
| DIN EN 325-1993 |
木質板料.試樣尺寸測定 |
(Wood-based panels; determination of dimensions of test pieces; German version EN 325:1993) |
| DIN EN 326-1-1994 |
木材.取樣.切割和監測.第1部分:試樣取樣和切割以及試驗結果說明 |
(Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results; German version EN 326-1:1994) |
| DIN EN 326-2-2000 |
木質板.取樣.切割和檢驗.第2部分:工廠中的質量控制 |
(Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory; German version EN 326-2:2000) |
| DIN EN 326-3-1998 |
木材.取樣,切割和監測.第3部分:木板供貨的驗收檢驗 |
(Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of a consignment of panels; German version EN 326-3:1998) |
| DIN EN 326-3-2004 |
木基板材.取樣、切割和檢驗.第3部分:單批板材的檢驗 |
|
| DIN EN 3264-2002 |
航空和航天系列.鈦合金管連接件8度30分.推力金屬絲螺母 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Thrust wire nuts; German version EN 3264:2001) |
| DIN EN 3266-2002 |
航空和航天系列.鈦合金管連接件.悶頭螺母 |
(Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut; German version EN 3266:2001) |
| DIN EN 3267-2002 |
航空和航天系列.鈦合金悶頭墊圈 |
(Aerospace series - Washers, bulkhead, in titanium alloy; German version EN 3267:2001) |
| DIN EN 3268-2002 |
航空和航天系列.鈦合金管聯接件8度30分.壓力插頭 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Pressure plug; German version EN 3268:2001) |
| DIN EN 327-2003 |
熱交換器.強制對流空氣冷卻制冷劑凝結器.性能確定的試驗程序 |
(Heat exchangers - Forced convection air cooled refrigerant condensors - Test procedure for establishing performance (includes amendment A1:2002); German version EN 327:2000 + A1:2002) |
| DIN EN 3270-2004 |
航空航天系列.8°30鈦合金管連接件.帶鎖緊環的堵塞 |
|
| DIN EN 3274-2002 |
航空和航天系列.鈦合金管聯接件8度30分.螺紋.幾何配置 |
(Aerospace series - Pipe coupling 8?0 - Threaded; Geometric configuration; German version EN 3274:2001) |
| DIN EN 3275-2002 |
航空航天系列.管連接80`高達28000kPa.移動光束密封.米制系列.技術規范 |
(Aerospace series - Pipe coupling 8?0 up to 28000 kPa - Dynamic beam seal; Metric series; Technical specification; German and English version EN 3275:2002) |
| DIN EN 328-2003 |
熱交換器.冷凍用強制對流空氣冷卻器的性能確定的試驗程序 |
(Heat exchangers - Test procedure for establishing the performance of forced convection unit air coolers for refrigeration (includes amendment A1:2002); German version EN 328:1999 + A1:2002) |
| DIN EN 3280-1994 |
航空和航天.飛機上用軸承.滾動軸承.向心球軸承或擺動軸承.交貨技術條件 |
(Aerospace series; bearings, airframe rolling, rigid or self-aligning; technical specification; German version EN 3280:1994) |
| DIN EN 3281-1994 |
航空和航天.飛機用軸承.鋼制單列向心球軸承.直徑系列8和9.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9; dimensions and loads; German version EN 3281:1994) |
| DIN EN 3282-1994 |
航空和航天.飛機用軸承.鍍鎘剛制單列向心球軸承.直徑系列8和9.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9; dimensions and loads; German version EN 3282:1994) |
| DIN EN 3283-1994 |
航空和航天.飛機用軸承.不銹鋼單列向心球軸承.直徑系列8和9.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9; dimensions and loads; German version EN 3283:1994) |
| DIN EN 3284-1994 |
航空和航天.飛機用軸承.鋼制單列向心球軸承.直徑系列0和2.一般軸承間隙.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3284:1994) |
| DIN EN 3285-1994 |
航空和航天.飛機用軸承.鍍鎘鋼制單列向心球軸承.直徑系列0和2.一般軸承間隙.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3285:1994) |
| DIN EN 3286-1994 |
航空和航天.飛機用軸承.不銹鋼制單列向心球軸承.直徑系列0和2.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3286:1994) |
| DIN EN 3287-1994 |
航空和航天.飛機用軸承.鋼制雙列自動調心球軸承.直徑系列2.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2; dimensions and load; German version EN 3287:1994) |
| DIN EN 3288-1994 |
航空和航天.飛機用軸承.鍍鎘鋼制雙列自動調心球軸承.直徑系列2.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2; dimensions and loads; German version EN 3288:1994) |
| DIN EN 3289-1994 |
航空和航天.飛機用軸承.不銹鋼制雙列自動調心球軸承.直徑系列2.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2; dimensions and loads; German version EN 3289:1994) |
| DIN EN 3290-1994 |
航空和航天.飛機用軸承.鋼制單列球面軸承.直徑系列3和4.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4; dimensions and loads; German version EN 3290:1994) |
| DIN EN 3291-1994 |
航空和航天.飛機用軸承.鍍鎘鋼制單列球面軸承.直徑系列3和4.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4; dimensions and loads; German version EN 3291:1994) |
| DIN EN 3292-1994 |
航空和航天.飛機用軸承.不銹鋼制單列球面軸承.直徑系列3和4.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4; dimensions and loads; German version EN 3292:1994) |
| DIN EN 3297-1998 |
航空和航天.薄壁,自鎖,耐高溫鎳基合金NI-P100HT(因康718)制用MJ螺紋的螺紋接頭.交貨技術條件 |
(Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification; German version EN 3297:1998) |
| DIN EN 3298-1998 |
航空和航天.薄壁,自鎖螺紋接頭.裝卸方法 |
(Aerospace series - Inserts, thin wall, self-locking - Installation and removal procedure; German version EN 3298:1998) |
| DIN EN 33-2003 |
帶密耦沖洗水箱的座便器.連接尺寸 |
(Pedestal W.C. pans with close coupled flushing cistern - Connecting dimensions; German version EN 33:2003) |
| DIN EN 330-1993 |
木材防腐劑.測定不接觸地面和涂層情況下使用的木材防腐劑的相對作用的野外試驗 |
(Wood preservatives; field test method for determining the relative protective effectiveness of a wood preservative for use under a coating and exposed out of ground contact: L-joint method; German version EN 330:1993) |
| DIN EN 3303-1997 |
航空和航天.鍍鎘合金鋼制中等螺紋長度內六角圓柱形螺絲.等級:1100MPa(室溫下)/235℃ |
(Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 C; German version EN 3303:1997) |
| DIN EN 3304-1996 |
航空和航天.鈦合金制陽極處理MoS鍛造短螺紋帶翼型十字槽帶小頭100度沉頭配合螺釘.等級:1100MPa(室溫下)/315 |
(Aerospace series - Screws, 100 countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS lubricated, classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3304:1996) |
| DIN EN 3305-1996 |
航空和航天.合金鋼制鍍鎘短螺紋帶翼型十字槽帶小頭100度沉頭配合螺釘.等級:1100MPa(室溫下)/235℃ |
(Aerospace series - Screws, 100 countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 C; German version EN 3305:1996) |
| DIN EN 3306-1996 |
航空和航天.鈦合金制陽極化MoS2潤滑短螺紋接近頂點帶翼形十字槽的100度沉頭螺絲.等級:1100MPa/315℃ |
(Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3306:1996) |
| DIN EN 3307-1996 |
航空和航天.鈦合金制陽極處理MoS鍛造螺紋接近根部帶翼型十字槽平頭螺釘.等級:1100MPa(室溫下)/315℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3307:1996) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com